Voici le retour pour le SATA :
$ dmesg | grep SATA
[ 0.793230] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2b impl SATA mode
[ 0.803193] ata1: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625100 irq 32
[ 0.803195] ata2: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625180 irq 32
[ 0.803196] ata4: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625280 irq 32
[ 0.803198] ata6: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625380 irq 32
[ 0.803326] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.803587] ata7: SATA max UDMA/133 abar m512@0xfa410000 port 0xfa410100 irq 19
[ 0.803589] ata8: SATA max UDMA/133 abar m512@0xfa410000 port 0xfa410180 irq 19
[ 0.803721] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.803977] ata9: SATA max UDMA/133 abar m512@0xfa110000 port 0xfa110100 irq 33
[ 0.803979] ata10: SATA max UDMA/133 abar m512@0xfa110000 port 0xfa110180 irq 33
[ 1.109065] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.109084] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.109130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109142] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.109164] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109184] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.263063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.263088] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.087086] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.087309] ata9: limiting SATA link speed to 3.0 Gbps
[ 12.719086] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 18.351088] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Juste au cas où, le retour complet :
$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e6 with crng_init=0
[ 0.000000] Linux version 4.13.16-200.fc26.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.2.1 20170915 (Red Hat 7.2.1-2) (GCC)) #1 SMP Mon Nov 27 18:19:47 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.16-200.fc26.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_GB.UTF-8 rd.driver.blacklist=nouveau modprobe.blacklist=nouveau elevator=deadline
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000defc6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000defc7000-0x00000000df01efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df01f000-0x00000000df5a1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df5a2000-0x00000000df5b2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df5b3000-0x00000000df5c9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df5ca000-0x00000000df5cbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df5cc000-0x00000000df5d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df5d4000-0x00000000df5ddfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df5de000-0x00000000df639fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df63a000-0x00000000df67cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df67d000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x02594018-0x025a3457] usable ==> usable
[ 0.000000] e820: update [mem 0x02594018-0x025a3457] usable ==> usable
[ 0.000000] e820: update [mem 0x025a7018-0x025b6657] usable ==> usable
[ 0.000000] e820: update [mem 0x025a7018-0x025b6657] usable ==> usable
[ 0.000000] e820: update [mem 0x025b7018-0x025bae57] usable ==> usable
[ 0.000000] e820: update [mem 0x025b7018-0x025bae57] usable ==> usable
[ 0.000000] e820: update [mem 0x025bb018-0x025c1457] usable ==> usable
[ 0.000000] e820: update [mem 0x025bb018-0x025c1457] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000002594017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000002594018-0x00000000025a3457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025a3458-0x00000000025a7017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025a7018-0x00000000025b6657] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025b6658-0x00000000025b7017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025b7018-0x00000000025bae57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025bae58-0x00000000025bb017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025bb018-0x00000000025c1457] usable
[ 0.000000] reserve setup_data: [mem 0x00000000025c1458-0x00000000defc6fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000defc7000-0x00000000df01efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000df01f000-0x00000000df5a1fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000df5a2000-0x00000000df5b2fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000df5b3000-0x00000000df5c9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000df5ca000-0x00000000df5cbfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000df5cc000-0x00000000df5d3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000df5d4000-0x00000000df5ddfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000df5de000-0x00000000df639fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000df63a000-0x00000000df67cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000df67d000-0x00000000df7fffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f7fffff] usable
[ 0.000000] efi: EFI v2.00 by American Megatrends
[ 0.000000] efi: SMBIOS=0xdf638a18 ACPI=0xdf016000 ACPI 2.0=0xdf016000 MPS=0xfcb10
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8P67 PRO, BIOS 1502 03/02/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 41F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf20-0x000fcf2f] mapped at [ffff8a06c00fcf20]
[ 0.000000] Base memory trampoline at [ffff8a06c0094000] 94000 size 24576
[ 0.000000] BRK [0x1ab495000, 0x1ab495fff] PGTABLE
[ 0.000000] BRK [0x1ab496000, 0x1ab496fff] PGTABLE
[ 0.000000] BRK [0x1ab497000, 0x1ab497fff] PGTABLE
[ 0.000000] BRK [0x1ab498000, 0x1ab498fff] PGTABLE
[ 0.000000] BRK [0x1ab499000, 0x1ab499fff] PGTABLE
[ 0.000000] BRK [0x1ab49a000, 0x1ab49afff] PGTABLE
[ 0.000000] BRK [0x1ab49b000, 0x1ab49bfff] PGTABLE
[ 0.000000] BRK [0x1ab49c000, 0x1ab49cfff] PGTABLE
[ 0.000000] BRK [0x1ab49d000, 0x1ab49dfff] PGTABLE
[ 0.000000] BRK [0x1ab49e000, 0x1ab49efff] PGTABLE
[ 0.000000] BRK [0x1ab49f000, 0x1ab49ffff] PGTABLE
[ 0.000000] BRK [0x1ab4a0000, 0x1ab4a0fff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x3d39a000-0x3e813fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DF016000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DF016068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DF01EA10 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DF016140 0088CF (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DF5D5F80 000040
[ 0.000000] ACPI: APIC 0x00000000DF01EB08 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DF01EBA0 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000DF01ED78 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DF01EDB8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f7ca000-0x41f7f4fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000defc6fff]
[ 0.000000] node 0: [mem 0x00000000df5ca000-0x00000000df5cbfff]
[ 0.000000] node 0: [mem 0x00000000df67d000-0x00000000df7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f7fffff]
[ 0.000000] On node 0 totalpages: 4188395
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 44 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14214 pages used for memmap
[ 0.000000] DMA32 zone: 909644 pages, LIFO batch:31
[ 0.000000] Normal zone: 51168 pages used for memmap
[ 0.000000] Normal zone: 3274752 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x02594000-0x02594fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025a3000-0x025a3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025a7000-0x025a7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025b6000-0x025b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025b7000-0x025b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025ba000-0x025bafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025bb000-0x025bbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x025c1000-0x025c1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdefc7000-0xdf01efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf01f000-0xdf5a1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf5a2000-0xdf5b2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf5b3000-0xdf5c9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf5cc000-0xdf5d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf5d4000-0xdf5ddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf5de000-0xdf639fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf63a000-0xdf67cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ffff8a0adf400000 s112600 r8192 d30760 u262144
[ 0.000000] pcpu-alloc: s112600 r8192 d30760 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4122905
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.16-200.fc26.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_GB.UTF-8 rd.driver.blacklist=nouveau modprobe.blacklist=nouveau elevator=deadline
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 16332704K/16753580K available (8837K kernel code, 2404K rwdata, 3760K rodata, 2224K init, 1976K bss, 420876K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 34936 entries in 137 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3410.925 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6821.85 BogoMIPS (lpj=3410925)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.002004] ACPI: Core revision 20170531
[ 0.004337] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.005030] Security Framework initialized
[ 0.005031] Yama: becoming mindful.
[ 0.005034] SELinux: Initializing.
[ 0.005043] SELinux: Starting in permissive mode
[ 0.008050] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.009171] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009223] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009259] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009418] CPU: Physical Processor ID: 0
[ 0.009419] CPU: Processor Core ID: 0
[ 0.009422] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009422] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009426] mce: CPU supports 9 MCE banks
[ 0.009432] CPU0: Thermal monitoring enabled (TM1)
[ 0.009441] process: using mwait in idle threads
[ 0.009443] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009443] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009525] Freeing SMP alternatives memory: 32K
[ 0.012685] smpboot: Max logical packages: 2
[ 0.013000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022084] TSC deadline timer enabled
[ 0.022086] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.022134] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.022149] ... version: 3
[ 0.022150] ... bit width: 48
[ 0.022150] ... generic registers: 4
[ 0.022151] ... value mask: 0000ffffffffffff
[ 0.022151] ... max period: 00007fffffffffff
[ 0.022151] ... fixed-purpose events: 3
[ 0.022152] ... event mask: 000000070000000f
[ 0.022179] Hierarchical SRCU implementation.
[ 0.022693] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.022706] smp: Bringing up secondary CPUs ...
[ 0.022763] x86: Booting SMP configuration:
[ 0.022763] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.030018] smp: Brought up 1 node, 8 CPUs
[ 0.030018] smpboot: Total of 8 processors activated (54574.80 BogoMIPS)
[ 0.031452] devtmpfs: initialized
[ 0.031452] x86/mm: Memory block size: 128MB
[ 0.032354] PM: Registering ACPI NVS region [mem 0xdefc7000-0xdf01efff] (360448 bytes)
[ 0.032354] PM: Registering ACPI NVS region [mem 0xdf5a2000-0xdf5b2fff] (69632 bytes)
[ 0.032354] PM: Registering ACPI NVS region [mem 0xdf5d4000-0xdf5ddfff] (40960 bytes)
[ 0.032354] PM: Registering ACPI NVS region [mem 0xdf63a000-0xdf67cfff] (274432 bytes)
[ 0.032354] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.032354] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.032354] pinctrl core: initialized pinctrl subsystem
[ 0.032354] RTC time: 8:41:33, date: 12/09/17
[ 0.032354] NET: Registered protocol family 16
[ 0.032378] cpuidle: using governor menu
[ 0.032378] PCCT header not found.
[ 0.032378] ACPI: bus type PCI registered
[ 0.032378] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.032378] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.032378] PCI: not using MMCONFIG
[ 0.032378] PCI: Using configuration type 1 for base access
[ 0.032378] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.034029] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.034043] ACPI: Added _OSI(Module Device)
[ 0.034044] ACPI: Added _OSI(Processor Device)
[ 0.034044] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.034045] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.034162] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.035382] ACPI: Dynamic OEM Table Load:
[ 0.035386] ACPI: SSDT 0xFFFF8A0ACC914000 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.035555] ACPI: Dynamic OEM Table Load:
[ 0.035557] ACPI: SSDT 0xFFFF8A0ACC45C800 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.037115] ACPI: EC: EC started
[ 0.037116] ACPI: EC: interrupt blocked
[ 0.037121] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.037122] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.037123] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.037124] ACPI: Interpreter enabled
[ 0.037137] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.037137] ACPI: Using IOAPIC for interrupt routing
[ 0.037156] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.037193] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.037197] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.037257] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.037370] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.037571] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.041268] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.041271] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.041358] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[ 0.041437] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.041442] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.041604] PCI host bridge to bus 0000:00
[ 0.041606] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.041607] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.041608] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.041609] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff window]
[ 0.041609] pci_bus 0000:00: root bus resource [mem 0xe4000000-0xffffffff window]
[ 0.041611] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.041616] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.041683] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.041707] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.041758] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[ 0.041780] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.041854] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.041876] pci 0000:00:16.0: reg 0x10: [mem 0xfa629000-0xfa62900f 64bit]
[ 0.041941] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.041999] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.042016] pci 0000:00:19.0: reg 0x10: [mem 0xfa600000-0xfa61ffff]
[ 0.042023] pci 0000:00:19.0: reg 0x14: [mem 0xfa628000-0xfa628fff]
[ 0.042030] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.042083] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.042139] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.042158] pci 0000:00:1a.0: reg 0x10: [mem 0xfa627000-0xfa6273ff]
[ 0.042234] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.042291] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.042309] pci 0000:00:1b.0: reg 0x10: [mem 0xfa620000-0xfa623fff 64bit]
[ 0.042366] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.042423] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.042497] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.042556] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.042630] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.042689] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.042763] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.042823] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.042897] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.042956] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.043030] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.043091] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.043166] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.043224] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.043298] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.043358] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.043377] pci 0000:00:1d.0: reg 0x10: [mem 0xfa626000-0xfa6263ff]
[ 0.043453] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.043510] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.043658] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.043673] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.043679] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.043685] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.043691] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.043698] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.043704] pci 0000:00:1f.2: reg 0x24: [mem 0xfa625000-0xfa6257ff]
[ 0.043738] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.043787] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.043803] pci 0000:00:1f.3: reg 0x10: [mem 0xfa624000-0xfa6240ff 64bit]
[ 0.043821] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.043895] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.043920] pci 0000:02:00.0: [10de:1200] type 00 class 0x030000
[ 0.043933] pci 0000:02:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
[ 0.043940] pci 0000:02:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.043948] pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.043953] pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.043958] pci 0000:02:00.0: reg 0x30: [mem 0xfa000000-0xfa07ffff pref]
[ 0.044028] pci 0000:02:00.1: [10de:0e0c] type 00 class 0x040300
[ 0.044039] pci 0000:02:00.1: reg 0x10: [mem 0xfa080000-0xfa083fff]
[ 0.044126] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.044128] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.044129] pci 0000:00:01.1: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.044131] pci 0000:00:01.1: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.044163] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.044222] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.044261] pci 0000:04:00.0: reg 0x10: [mem 0xfa500000-0xfa501fff 64bit]
[ 0.044402] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.047020] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.047024] pci 0000:00:1c.1: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.047063] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.047132] pci 0000:06:00.0: [197b:2362] type 00 class 0x010185
[ 0.047178] pci 0000:06:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.047193] pci 0000:06:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.047207] pci 0000:06:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.047222] pci 0000:06:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.047236] pci 0000:06:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.047251] pci 0000:06:00.0: reg 0x24: [mem 0xfa410000-0xfa4101ff]
[ 0.047266] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.047333] pci 0000:06:00.0: PME# supported from D3hot
[ 0.050016] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.050019] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.050022] pci 0000:00:1c.3: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.050079] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.050117] pci 0000:07:00.0: reg 0x10: [mem 0xfa300000-0xfa301fff 64bit]
[ 0.050259] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.053020] pci 0000:00:1c.4: PCI bridge to [bus 07]
[ 0.053025] pci 0000:00:1c.4: bridge window [mem 0xfa300000-0xfa3fffff]
[ 0.053081] pci 0000:08:00.0: [1b21:1080] type 01 class 0x060401
[ 0.053220] pci 0000:00:1c.6: PCI bridge to [bus 08-09] (subtractive decode)
[ 0.053222] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.053225] pci 0000:00:1c.6: bridge window [mem 0xfa200000-0xfa2fffff]
[ 0.053230] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.053231] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.053232] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.053233] pci 0000:00:1c.6: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode)
[ 0.053233] pci 0000:00:1c.6: bridge window [mem 0xe4000000-0xffffffff window] (subtractive decode)
[ 0.053279] pci 0000:09:00.0: [168c:0029] type 00 class 0x028000
[ 0.053311] pci 0000:09:00.0: reg 0x10: [mem 0xfa200000-0xfa20ffff]
[ 0.053427] pci 0000:09:00.0: PME# supported from D0 D3hot
[ 0.053476] pci 0000:09:03.0: [1106:3044] type 00 class 0x0c0010
[ 0.053513] pci 0000:09:03.0: reg 0x10: [mem 0xfa210000-0xfa2107ff]
[ 0.053529] pci 0000:09:03.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.053656] pci 0000:09:03.0: supports D2
[ 0.053657] pci 0000:09:03.0: PME# supported from D2 D3hot D3cold
[ 0.053750] pci 0000:08:00.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.053759] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.053763] pci 0000:08:00.0: bridge window [mem 0xfa200000-0xfa2fffff]
[ 0.053772] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
[ 0.053773] pci 0000:08:00.0: bridge window [mem 0xfa200000-0xfa2fffff] (subtractive decode)
[ 0.053774] pci 0000:08:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.053774] pci 0000:08:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.053775] pci 0000:08:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.053776] pci 0000:08:00.0: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode)
[ 0.053777] pci 0000:08:00.0: bridge window [mem 0xe4000000-0xffffffff window] (subtractive decode)
[ 0.053835] pci 0000:0a:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.053860] pci 0000:0a:00.0: reg 0x10: [io 0xb040-0xb047]
[ 0.053871] pci 0000:0a:00.0: reg 0x14: [io 0xb030-0xb033]
[ 0.053883] pci 0000:0a:00.0: reg 0x18: [io 0xb020-0xb027]
[ 0.053894] pci 0000:0a:00.0: reg 0x1c: [io 0xb010-0xb013]
[ 0.053905] pci 0000:0a:00.0: reg 0x20: [io 0xb000-0xb00f]
[ 0.053916] pci 0000:0a:00.0: reg 0x24: [mem 0xfa110000-0xfa1101ff]
[ 0.053928] pci 0000:0a:00.0: reg 0x30: [mem 0xfa100000-0xfa10ffff pref]
[ 0.053939] pci 0000:0a:00.0: Enabling fixed DMA alias to 00.1
[ 0.053989] pci 0000:0a:00.0: PME# supported from D3hot
[ 0.057015] pci 0000:00:1c.7: PCI bridge to [bus 0a]
[ 0.057018] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.057021] pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.057356] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.057390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.057422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.057454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.057486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.057518] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.057549] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.057581] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.057643] ACPI: EC: interrupt unblocked
[ 0.057648] ACPI: EC: event unblocked
[ 0.057653] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.057654] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.057690] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[ 0.057690] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.057690] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.057690] vgaarb: loaded
[ 0.057690] SCSI subsystem initialized
[ 0.057690] libata version 3.00 loaded.
[ 0.057690] ACPI: bus type USB registered
[ 0.057690] usbcore: registered new interface driver usbfs
[ 0.057690] usbcore: registered new interface driver hub
[ 0.057690] usbcore: registered new device driver usb
[ 0.057690] EDAC MC: Ver: 3.0.0
[ 0.057690] Registered efivars operations
[ 0.089014] PCI: Using ACPI for IRQ routing
[ 0.089741] PCI: pci_cache_line_size set to 64 bytes
[ 0.089808] e820: reserve RAM buffer [mem 0x02594018-0x03ffffff]
[ 0.089809] e820: reserve RAM buffer [mem 0x025a7018-0x03ffffff]
[ 0.089810] e820: reserve RAM buffer [mem 0x025b7018-0x03ffffff]
[ 0.089810] e820: reserve RAM buffer [mem 0x025bb018-0x03ffffff]
[ 0.089811] e820: reserve RAM buffer [mem 0xdefc7000-0xdfffffff]
[ 0.089812] e820: reserve RAM buffer [mem 0xdf5cc000-0xdfffffff]
[ 0.089813] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.089814] e820: reserve RAM buffer [mem 0x41f800000-0x41fffffff]
[ 0.089875] NetLabel: Initializing
[ 0.089875] NetLabel: domain hash size = 128
[ 0.089876] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.089887] NetLabel: unlabeled traffic allowed by default
[ 0.090057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.090060] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.092014] clocksource: Switched to clocksource hpet
[ 0.100062] VFS: Disk quotas dquot_6.6.0
[ 0.100082] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.100145] pnp: PnP ACPI init
[ 0.100257] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.100258] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.100259] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.100260] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.100261] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.100264] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.100326] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.100328] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100346] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.100380] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.100382] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.100528] pnp 00:04: [dma 0 disabled]
[ 0.100560] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.100656] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.100657] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.100658] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.100659] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.100660] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.100661] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.100662] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.100664] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.100702] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.100704] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.100840] pnp: PnP ACPI: found 7 devices
[ 0.106528] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.106592] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.106597] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.106598] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 0.106600] pci 0000:00:01.1: bridge window [mem 0xf8000000-0xfa0fffff]
[ 0.106601] pci 0000:00:01.1: bridge window [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.106603] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.106612] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 0.106616] pci 0000:00:1c.1: bridge window [mem 0xfa500000-0xfa5fffff]
[ 0.106622] pci 0000:00:1c.2: PCI bridge to [bus 05]
[ 0.106634] pci 0000:06:00.0: BAR 6: assigned [mem 0xfa400000-0xfa40ffff pref]
[ 0.106635] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.106637] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.106640] pci 0000:00:1c.3: bridge window [mem 0xfa400000-0xfa4fffff]
[ 0.106647] pci 0000:00:1c.4: PCI bridge to [bus 07]
[ 0.106650] pci 0000:00:1c.4: bridge window [mem 0xfa300000-0xfa3fffff]
[ 0.106657] pci 0000:08:00.0: PCI bridge to [bus 09]
[ 0.106660] pci 0000:08:00.0: bridge window [io 0xc000-0xcfff]
[ 0.106666] pci 0000:08:00.0: bridge window [mem 0xfa200000-0xfa2fffff]
[ 0.106679] pci 0000:00:1c.6: PCI bridge to [bus 08-09]
[ 0.106680] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
[ 0.106684] pci 0000:00:1c.6: bridge window [mem 0xfa200000-0xfa2fffff]
[ 0.106690] pci 0000:00:1c.7: PCI bridge to [bus 0a]
[ 0.106692] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 0.106695] pci 0000:00:1c.7: bridge window [mem 0xfa100000-0xfa1fffff]
[ 0.106703] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.106704] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.106704] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.106705] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff window]
[ 0.106706] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xffffffff window]
[ 0.106707] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.106708] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfa0fffff]
[ 0.106709] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xf3ffffff 64bit pref]
[ 0.106710] pci_bus 0000:04: resource 1 [mem 0xfa500000-0xfa5fffff]
[ 0.106711] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.106711] pci_bus 0000:06: resource 1 [mem 0xfa400000-0xfa4fffff]
[ 0.106712] pci_bus 0000:07: resource 1 [mem 0xfa300000-0xfa3fffff]
[ 0.106713] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.106714] pci_bus 0000:08: resource 1 [mem 0xfa200000-0xfa2fffff]
[ 0.106715] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
[ 0.106716] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
[ 0.106716] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.106717] pci_bus 0000:08: resource 7 [mem 0x000c8000-0x000dffff window]
[ 0.106718] pci_bus 0000:08: resource 8 [mem 0xe4000000-0xffffffff window]
[ 0.106719] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 0.106720] pci_bus 0000:09: resource 1 [mem 0xfa200000-0xfa2fffff]
[ 0.106720] pci_bus 0000:09: resource 4 [io 0xc000-0xcfff]
[ 0.106721] pci_bus 0000:09: resource 5 [mem 0xfa200000-0xfa2fffff]
[ 0.106722] pci_bus 0000:09: resource 6 [io 0x0000-0x0cf7 window]
[ 0.106723] pci_bus 0000:09: resource 7 [io 0x0d00-0xffff window]
[ 0.106723] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.106724] pci_bus 0000:09: resource 9 [mem 0x000c8000-0x000dffff window]
[ 0.106725] pci_bus 0000:09: resource 10 [mem 0xe4000000-0xffffffff window]
[ 0.106726] pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
[ 0.106727] pci_bus 0000:0a: resource 1 [mem 0xfa100000-0xfa1fffff]
[ 0.106791] NET: Registered protocol family 2
[ 0.106958] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.107136] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.107249] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.107282] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.107323] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.107386] NET: Registered protocol family 1
[ 0.356062] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.356262] PCI: CLS 64 bytes, default 64
[ 0.356291] Unpacking initramfs...
[ 0.596409] Freeing initrd memory: 20968K
[ 0.597165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.597166] software IO TLB [mem 0xdafc7000-0xdefc7000] (64MB) mapped at [ffff8a079afc7000-ffff8a079efc6fff]
[ 0.597984] audit: initializing netlink subsys (disabled)
[ 0.598022] audit: type=2000 audit(1512808892.598:1): state=initialized audit_enabled=0 res=1
[ 0.598214] Initialise system trusted keyrings
[ 0.598221] Key type blacklist registered
[ 0.598246] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.598995] zbud: loaded
[ 0.599338] SELinux: Registering netfilter hooks
[ 0.751553] NET: Registered protocol family 38
[ 0.751555] Key type asymmetric registered
[ 0.751556] Asymmetric key parser 'x509' registered
[ 0.751583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.751613] io scheduler noop registered
[ 0.751613] io scheduler deadline registered (default)
[ 0.751635] io scheduler cfq registered
[ 0.751635] io scheduler mq-deadline registered
[ 0.751701] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.752465] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 0.752474] pcieport 0000:00:01.1: Signaling PME with IRQ 25
[ 0.752495] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.752508] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.752523] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.752537] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
[ 0.752552] pcieport 0000:00:1c.4: Signaling PME with IRQ 30
[ 0.752566] pcieport 0000:00:1c.7: Signaling PME with IRQ 31
[ 0.752587] efifb: probing for efifb
[ 0.752594] efifb: framebuffer at 0xf1000000, using 1876k, total 1875k
[ 0.752595] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.752595] efifb: scrolling: redraw
[ 0.752596] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.752660] Console: switching to colour frame buffer device 100x37
[ 0.759777] fb0: EFI VGA frame buffer device
[ 0.759782] intel_idle: MWAIT substates: 0x1120
[ 0.759782] intel_idle: v0.4.1 model 0x2A
[ 0.759961] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.760023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.760036] ACPI: Power Button [PWRB]
[ 0.760058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.760065] ACPI: Power Button [PWRF]
[ 0.760601] GHES: HEST is not enabled!
[ 0.760670] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.781230] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.782529] Non-volatile memory driver v1.3
[ 0.782545] Linux agpgart interface v0.103
[ 0.783033] ahci 0000:00:1f.2: version 3.0
[ 0.793230] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2b impl SATA mode
[ 0.793234] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.802462] scsi host0: ahci
[ 0.802687] scsi host1: ahci
[ 0.802900] scsi host2: ahci
[ 0.803008] scsi host3: ahci
[ 0.803094] scsi host4: ahci
[ 0.803174] scsi host5: ahci
[ 0.803193] ata1: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625100 irq 32
[ 0.803195] ata2: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625180 irq 32
[ 0.803195] ata3: DUMMY
[ 0.803196] ata4: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625280 irq 32
[ 0.803197] ata5: DUMMY
[ 0.803198] ata6: SATA max UDMA/133 abar m2048@0xfa625000 port 0xfa625380 irq 32
[ 0.803326] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.803328] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.803500] scsi host6: ahci
[ 0.803566] scsi host7: ahci
[ 0.803587] ata7: SATA max UDMA/133 abar m512@0xfa410000 port 0xfa410100 irq 19
[ 0.803589] ata8: SATA max UDMA/133 abar m512@0xfa410000 port 0xfa410180 irq 19
[ 0.803721] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.803723] ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.803891] scsi host8: ahci
[ 0.803955] scsi host9: ahci
[ 0.803977] ata9: SATA max UDMA/133 abar m512@0xfa110000 port 0xfa110100 irq 33
[ 0.803979] ata10: SATA max UDMA/133 abar m512@0xfa110000 port 0xfa110180 irq 33
[ 0.804032] libphy: Fixed MDIO Bus: probed
[ 0.804072] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.804073] ehci-pci: EHCI PCI platform driver
[ 0.804135] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.804166] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.804176] ehci-pci 0000:00:1a.0: debug port 2
[ 0.808063] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.808069] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfa627000
[ 0.815013] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.815040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.815041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.815042] usb usb1: Product: EHCI Host Controller
[ 0.815043] usb usb1: Manufacturer: Linux 4.13.16-200.fc26.x86_64 ehci_hcd
[ 0.815043] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.815115] hub 1-0:1.0: USB hub found
[ 0.815120] hub 1-0:1.0: 2 ports detected
[ 0.815224] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.815249] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.815257] ehci-pci 0000:00:1d.0: debug port 2
[ 0.819141] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.819144] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfa626000
[ 0.826013] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.826036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.826037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.826038] usb usb2: Product: EHCI Host Controller
[ 0.826039] usb usb2: Manufacturer: Linux 4.13.16-200.fc26.x86_64 ehci_hcd
[ 0.826039] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.826097] hub 2-0:1.0: USB hub found
[ 0.826100] hub 2-0:1.0: 2 ports detected
[ 0.826155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.826157] ohci-pci: OHCI PCI platform driver
[ 0.826162] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.826213] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.826237] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 0.826390] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 0.826553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.826554] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.826555] usb usb3: Product: xHCI Host Controller
[ 0.826556] usb usb3: Manufacturer: Linux 4.13.16-200.fc26.x86_64 xhci-hcd
[ 0.826556] usb usb3: SerialNumber: 0000:04:00.0
[ 0.826609] hub 3-0:1.0: USB hub found
[ 0.826616] hub 3-0:1.0: 2 ports detected
[ 0.826668] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.826692] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 0.829820] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.829830] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.829831] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.829832] usb usb4: Product: xHCI Host Controller
[ 0.829833] usb usb4: Manufacturer: Linux 4.13.16-200.fc26.x86_64 xhci-hcd
[ 0.829833] usb usb4: SerialNumber: 0000:04:00.0
[ 0.829885] hub 4-0:1.0: USB hub found
[ 0.829892] hub 4-0:1.0: 2 ports detected
[ 0.829982] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.830011] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 0.830160] xhci_hcd 0000:07:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 0.830323] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.830324] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.830325] usb usb5: Product: xHCI Host Controller
[ 0.830326] usb usb5: Manufacturer: Linux 4.13.16-200.fc26.x86_64 xhci-hcd
[ 0.830326] usb usb5: SerialNumber: 0000:07:00.0
[ 0.830378] hub 5-0:1.0: USB hub found
[ 0.830385] hub 5-0:1.0: 2 ports detected
[ 0.830436] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 0.830459] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 0.833589] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.833600] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.833601] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.833602] usb usb6: Product: xHCI Host Controller
[ 0.833602] usb usb6: Manufacturer: Linux 4.13.16-200.fc26.x86_64 xhci-hcd
[ 0.833603] usb usb6: SerialNumber: 0000:07:00.0
[ 0.833653] hub 6-0:1.0: USB hub found
[ 0.833660] hub 6-0:1.0: 2 ports detected
[ 0.833724] usbcore: registered new interface driver usbserial
[ 0.833728] usbcore: registered new interface driver usbserial_generic
[ 0.833731] usbserial: USB Serial support registered for generic
[ 0.833744] i8042: PNP: No PS/2 controller found.
[ 0.833767] mousedev: PS/2 mouse device common for all mice
[ 0.833834] rtc_cmos 00:02: RTC can wake from S4
[ 0.833943] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.833965] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.834007] device-mapper: uevent: version 1.0.3
[ 0.834050] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.834091] intel_pstate: Intel P-state driver initializing
[ 0.834801] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.834843] usbcore: registered new interface driver usbhid
[ 0.834843] usbhid: USB HID core driver
[ 0.834949] drop_monitor: Initializing network drop monitor service
[ 0.835051] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.835194] Initializing XFRM netlink socket
[ 0.835360] NET: Registered protocol family 10
[ 0.838617] Segment Routing with IPv6
[ 0.838640] mip6: Mobile IPv6
[ 0.838642] NET: Registered protocol family 17
[ 0.839263] RAS: Correctable Errors collector initialized.
[ 0.839306] microcode: sig=0x206a7, pf=0x2, revision=0x29
[ 0.839450] microcode: Microcode Update Driver: v2.2.
[ 0.839460] AVX version of gcm_enc/dec engaged.
[ 0.839461] AES CTR mode by8 optimization enabled
[ 0.853358] sched_clock: Marking stable (853351495, 0)->(982079897, -128728402)
[ 0.853645] registered taskstats version 1
[ 0.853651] Loading compiled-in X.509 certificates
[ 0.888557] Loaded X.509 cert 'Fedora kernel signing key: bacdc24f4f2337798de882560737fa4b8b84013d'
[ 0.896563] Couldn't get size: 0x800000000000000e
[ 0.896667] MODSIGN: Couldn't get UEFI db list
[ 0.905025] Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
[ 0.908948] Couldn't get size: 0x800000000000000e
[ 0.909046] MODSIGN: Couldn't get UEFI dbx list
[ 0.909063] zswap: loaded using pool lzo/zbud
[ 0.912993] Key type big_key registered
[ 0.915513] Key type encrypted registered
[ 0.915821] Magic number: 13:691:674
[ 0.915916] rtc_cmos 00:02: setting system clock to 2017-12-09 08:41:33 UTC (1512808893)
[ 0.915941] PM: Hibernation image not present or could not be loaded.
[ 1.109065] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.109084] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.109130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109142] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.109164] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109184] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109913] ata6.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
[ 1.109916] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.110790] ata6.00: configured for UDMA/133
[ 1.112544] ata2.00: ATA-8: WDC WD6000HLHX-01JJPV0, 04.05G04, max UDMA/133
[ 1.112547] ata2.00: 1172123568 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.113631] ata4.00: ATA-8: WDC WD15EADS-22P8B0, 01.00A01, max UDMA/133
[ 1.113633] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.115603] ata1.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.115605] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.116538] ata2.00: configured for UDMA/133
[ 1.117631] ata4.00: configured for UDMA/133
[ 1.122227] ata1.00: configured for UDMA/133
[ 1.122439] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.123092] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.123103] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.123105] sd 0:0:0:0: [sda] Write Protect is off
[ 1.123107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.123125] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.123396] scsi 1:0:0:0: Direct-Access ATA WDC WD6000HLHX-0 5G04 PQ: 0 ANSI: 5
[ 1.123751] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.124006] scsi 3:0:0:0: Direct-Access ATA WDC WD15EADS-22P 0A01 PQ: 0 ANSI: 5
[ 1.124042] sd 1:0:0:0: [sdb] 1172123568 512-byte logical blocks: (600 GB/559 GiB)
[ 1.124087] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.124089] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.124154] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.124377] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.124467] sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.124496] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.124499] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.124537] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
[ 1.124539] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.124801] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.124843] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.124845] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 1.124871] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.124873] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.124910] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.127038] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.134160] sda: sda1 sda4 < sda5 >
[ 1.134416] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.135033] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.136004] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.137127] sdc: sdc1 sdc2
[ 1.138112] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.143073] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[ 1.180903] sdd: sdd1
[ 1.181890] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 1.245743] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.245745] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.246120] hub 1-1:1.0: USB hub found
[ 1.246340] hub 1-1:1.0: 6 ports detected
[ 1.253452] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.253454] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.253726] hub 2-1:1.0: USB hub found
[ 1.253922] hub 2-1:1.0: 8 ports detected
[ 1.263063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.263088] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.263269] ata9.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 1.338773] usb 5-1: New USB device found, idVendor=046d, idProduct=c22e
[ 1.338776] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.338778] usb 5-1: Product: G510 Gaming Keyboard
[ 1.338780] usb 5-1: Manufacturer: Logitech
[ 1.357935] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:07:00.0/usb5/5-1/5-1:1.0/0003:046D:C22E.0001/input/input2
[ 1.409370] hid-generic 0003:046D:C22E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech G510 Gaming Keyboard] on usb-0000:07:00.0-1/input0
[ 1.435232] input: Logitech G510 Gaming Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:07:00.0/usb5/5-1/5-1:1.1/0003:046D:C22E.0002/input/input3
[ 1.487396] hid-generic 0003:046D:C22E.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech G510 Gaming Keyboard] on usb-0000:07:00.0-1/input1
[ 1.519060] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.527071] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
[ 1.591076] usb 5-2: new full-speed USB device number 3 using xhci_hcd
[ 1.599718] usb 1-1.2: New USB device found, idVendor=1b1c, idProduct=0c04
[ 1.599721] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.599723] usb 1-1.2: Product: Integrated USB Bridge
[ 1.599724] usb 1-1.2: Manufacturer: Corsair Memory, Inc.
[ 1.600867] hid-generic 0003:1B1C:0C04.0003: hiddev97,hidraw2: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:1a.0-1.2/input0
[ 1.605868] usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[ 1.605871] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.631074] tsc: Refined TSC clocksource calibration: 3411.127 MHz
[ 1.631085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x312b5e33c4e, max_idle_ns: 440795327319 ns
[ 1.750792] usb 5-2: New USB device found, idVendor=0738, idProduct=1708
[ 1.750795] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.750797] usb 5-2: Product: Mad Catz R.A.T.7 Mouse
[ 1.750799] usb 5-2: Manufacturer: Mad Catz
[ 1.765032] input: Mad Catz Mad Catz R.A.T.7 Mouse as /devices/pci0000:00/0000:00:1c.4/0000:07:00.0/usb5/5-2/5-2:1.0/0003:0738:1708.0004/input/input4
[ 1.765389] hid-generic 0003:0738:1708.0004: input,hidraw3: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.7 Mouse] on usb-0000:07:00.0-2/input0
[ 2.639281] clocksource: Switched to clocksource tsc
[ 6.623118] ata10.00: ATA-11: KINGSTON SA400S37480G, SBFK10D7, max UDMA/133
[ 6.623121] ata10.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.623430] ata10.00: configured for UDMA/133
[ 7.087086] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.087305] ata9.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 7.087309] ata9: limiting SATA link speed to 3.0 Gbps
[ 12.719086] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 12.719334] ata9.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 18.351088] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 18.351351] scsi 9:0:0:0: Direct-Access ATA KINGSTON SA400S 10D7 PQ: 0 ANSI: 5
[ 18.351801] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 18.352218] sd 9:0:0:0: [sde] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 18.352283] sd 9:0:0:0: [sde] Write Protect is off
[ 18.352286] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 18.352410] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.355702] sde: sde1 sde2 sde3
[ 18.356585] sd 9:0:0:0: [sde] Attached SCSI removable disk
[ 18.360945] Freeing unused kernel memory: 2224K
[ 18.360947] Write protecting the kernel read-only data: 14336k
[ 18.361610] Freeing unused kernel memory: 1392K
[ 18.362761] Freeing unused kernel memory: 336K
[ 18.364262] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 18.364266] rodata_test: all tests were successful
[ 18.498259] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[ 18.498369] systemd[1]: Detected architecture x86-64.
[ 18.498371] systemd[1]: Running in initial RAM disk.
[ 18.498379] systemd[1]: Set hostname to <localhost.localdomain>.
[ 18.539574] systemd[1]: /run/systemd/generator/dev-mapper-fedora\x2droot.device.d/timeout.conf:3: Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit'
[ 18.540569] systemd[1]: Reached target Swap.
[ 18.541019] systemd[1]: Created slice System Slice.
[ 18.541154] systemd[1]: Listening on Journal Audit Socket.
[ 18.541183] systemd[1]: Listening on udev Kernel Socket.
[ 18.541230] systemd[1]: Listening on Journal Socket.
[ 18.550901] audit: type=1130 audit(1512808911.134:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.582540] audit: type=1130 audit(1512808911.166:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.589162] audit: type=1130 audit(1512808911.173:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.589164] audit: type=1131 audit(1512808911.173:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.618560] audit: type=1130 audit(1512808911.202:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.647376] audit: type=1130 audit(1512808911.231:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.654949] audit: type=1130 audit(1512808911.238:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.694838] audit: type=1130 audit(1512808911.278:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.701058] pps_core: LinuxPPS API ver. 1 registered
[ 18.701059] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 18.702700] PTP clock support registered
[ 18.709248] audit: type=1130 audit(1512808911.293:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 18.717542] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 18.717543] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 18.717653] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 18.778106] firewire_ohci 0000:09:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 18.835323] random: crng init done
[ 18.848015] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 18.971902] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:39:d3:bd
[ 18.971904] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 18.971936] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 18.972923] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 19.279153] firewire_core 0000:09:03.0: created device fw0: GUID 001fc60000118051, S400
[ 19.337032] audit: type=1130 audit(1512808911.921:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.391433] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 19.675496] systemd-journald[257]: Received SIGTERM from PID 1 (systemd).
[ 19.698273] systemd: 18 output lines suppressed due to ratelimiting
[ 19.797564] SELinux: 32768 avtab hash slots, 107500 rules.
[ 19.806720] SELinux: 32768 avtab hash slots, 107500 rules.
[ 19.824067] SELinux: 8 users, 14 roles, 5093 types, 314 bools, 1 sens, 1024 cats
[ 19.824069] SELinux: 94 classes, 107500 rules
[ 19.826342] SELinux: Permission getrlimit in class process not defined in policy.
[ 19.826342] SELinux: Class process2 not defined in policy.
[ 19.826351] SELinux: Permission map in class file not defined in policy.
[ 19.826354] SELinux: Permission map in class dir not defined in policy.
[ 19.826356] SELinux: Permission map in class lnk_file not defined in policy.
[ 19.826358] SELinux: Permission map in class chr_file not defined in policy.
[ 19.826359] SELinux: Permission map in class blk_file not defined in policy.
[ 19.826360] SELinux: Permission map in class sock_file not defined in policy.
[ 19.826362] SELinux: Permission map in class fifo_file not defined in policy.
[ 19.826364] SELinux: Permission map in class socket not defined in policy.
[ 19.826366] SELinux: Permission map in class tcp_socket not defined in policy.
[ 19.826367] SELinux: Permission map in class udp_socket not defined in policy.
[ 19.826368] SELinux: Permission map in class rawip_socket not defined in policy.
[ 19.826370] SELinux: Permission map in class netlink_socket not defined in policy.
[ 19.826371] SELinux: Permission map in class packet_socket not defined in policy.
[ 19.826372] SELinux: Permission map in class key_socket not defined in policy.
[ 19.826374] SELinux: Permission map in class unix_stream_socket not defined in policy.
[ 19.826375] SELinux: Permission map in class unix_dgram_socket not defined in policy.
[ 19.826379] SELinux: Permission map in class netlink_route_socket not defined in policy.
[ 19.826381] SELinux: Permission map in class netlink_tcpdiag_socket not defined in policy.
[ 19.826382] SELinux: Permission map in class netlink_nflog_socket not defined in policy.
[ 19.826383] SELinux: Permission map in class netlink_xfrm_socket not defined in policy.
[ 19.826384] SELinux: Permission map in class netlink_selinux_socket not defined in policy.
[ 19.826386] SELinux: Permission map in class netlink_iscsi_socket not defined in policy.
[ 19.826387] SELinux: Permission map in class netlink_audit_socket not defined in policy.
[ 19.826388] SELinux: Permission map in class netlink_fib_lookup_socket not defined in policy.
[ 19.826390] SELinux: Permission map in class netlink_connector_socket not defined in policy.
[ 19.826391] SELinux: Permission map in class netlink_netfilter_socket not defined in policy.
[ 19.826392] SELinux: Permission map in class netlink_dnrt_socket not defined in policy.
[ 19.826393] SELinux: Permission map in class netlink_kobject_uevent_socket not defined in policy.
[ 19.826395] SELinux: Permission map in class netlink_generic_socket not defined in policy.
[ 19.826396] SELinux: Permission map in class netlink_scsitransport_socket not defined in policy.
[ 19.826397] SELinux: Permission map in class netlink_rdma_socket not defined in policy.
[ 19.826398] SELinux: Permission map in class netlink_crypto_socket not defined in policy.
[ 19.826399] SELinux: Permission map in class appletalk_socket not defined in policy.
[ 19.826401] SELinux: Permission map in class dccp_socket not defined in policy.
[ 19.826404] SELinux: Permission map in class tun_socket not defined in policy.
[ 19.826407] SELinux: Class sctp_socket not defined in policy.
[ 19.826408] SELinux: Class icmp_socket not defined in policy.
[ 19.826408] SELinux: Class ax25_socket not defined in policy.
[ 19.826408] SELinux: Class ipx_socket not defined in policy.
[ 19.826409] SELinux: Class netrom_socket not defined in policy.
[ 19.826409] SELinux: Class atmpvc_socket not defined in policy.
[ 19.826409] SELinux: Class x25_socket not defined in policy.
[ 19.826409] SELinux: Class rose_socket not defined in policy.
[ 19.826410] SELinux: Class decnet_socket not defined in policy.
[ 19.826410] SELinux: Class atmsvc_socket not defined in policy.
[ 19.826410] SELinux: Class rds_socket not defined in policy.
[ 19.826411] SELinux: Class irda_socket not defined in policy.
[ 19.826411] SELinux: Class pppox_socket not defined in policy.
[ 19.826411] SELinux: Class llc_socket not defined in policy.
[ 19.826412] SELinux: Class can_socket not defined in policy.
[ 19.826412] SELinux: Class tipc_socket not defined in policy.
[ 19.826412] SELinux: Class bluetooth_socket not defined in policy.
[ 19.826413] SELinux: Class iucv_socket not defined in policy.
[ 19.826413] SELinux: Class rxrpc_socket not defined in policy.
[ 19.826413] SELinux: Class isdn_socket not defined in policy.
[ 19.826414] SELinux: Class phonet_socket not defined in policy.
[ 19.826414] SELinux: Class ieee802154_socket not defined in policy.
[ 19.826414] SELinux: Class caif_socket not defined in policy.
[ 19.826414] SELinux: Class alg_socket not defined in policy.
[ 19.826415] SELinux: Class nfc_socket not defined in policy.
[ 19.826415] SELinux: Class vsock_socket not defined in policy.
[ 19.826415] SELinux: Class kcm_socket not defined in policy.
[ 19.826416] SELinux: Class qipcrtr_socket not defined in policy.
[ 19.826416] SELinux: Class smc_socket not defined in policy.
[ 19.826416] SELinux: Class infiniband_pkey not defined in policy.
[ 19.826417] SELinux: Class infiniband_endport not defined in policy.
[ 19.826417] SELinux: the above unknown classes and permissions will be allowed
[ 19.826419] SELinux: policy capability network_peer_controls=1
[ 19.826420] SELinux: policy capability open_perms=1
[ 19.826420] SELinux: policy capability extended_socket_class=0
[ 19.826420] SELinux: policy capability always_check_network=0
[ 19.826421] SELinux: policy capability cgroup_seclabel=0
[ 19.826421] SELinux: policy capability nnp_nosuid_transition=0
[ 19.826422] SELinux: Completing initialization.
[ 19.826422] SELinux: Setting up existing superblocks.
[ 19.842013] systemd[1]: Successfully loaded SELinux policy in 68.196ms.
[ 19.870074] systemd[1]: Relabelled /dev and /run in 13.141ms.
[ 20.088659] EXT4-fs (dm-0): re-mounted. Opts: discard
[ 20.106979] systemd-journald[628]: Received request to flush runtime journal from PID 1
[ 20.322497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.392690] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 20.392692] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 20.392692] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.392693] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 20.399811] asus_wmi: ASUS WMI generic driver loaded
[ 20.401684] asus_wmi: Initialization: 0x0
[ 20.401706] asus_wmi: BIOS WMI version: 0.9
[ 20.401740] asus_wmi: SFUN value: 0x0
[ 20.402014] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 20.402376] asus_wmi: Number of fans: 1
[ 20.426777] Bluetooth: Core ver 2.22
[ 20.426788] NET: Registered protocol family 31
[ 20.426788] Bluetooth: HCI device and connection manager initialized
[ 20.426790] Bluetooth: HCI socket layer initialized
[ 20.426791] Bluetooth: L2CAP socket layer initialized
[ 20.426795] Bluetooth: SCO socket layer initialized
[ 20.439309] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 20.439403] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 20.439536] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[ 20.439540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.439541] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[ 20.439543] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.439544] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[ 20.439546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.439547] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.440265] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 20.440485] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 20.440490] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 20.462086] iTCO_vendor_support: vendor-support=0
[ 20.467168] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 20.467206] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 20.467280] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 20.467281] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.467282] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 20.467283] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 20.467284] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
[ 20.467284] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 20.467286] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 20.467287] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 20.467288] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 20.467538] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.478269] ath9k 0000:09:00.0: enabling device (0000 -> 0002)
[ 20.541572] nvidia: loading out-of-tree module taints kernel.
[ 20.541577] nvidia: module license 'NVIDIA' taints kernel.
[ 20.541577] Disabling lock debugging due to kernel taint
[ 20.544949] Adding 8269820k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8269820k SSFS
[ 20.545789] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 20.549682] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 20.549881] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 20.549938] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.22 Wed Oct 25 23:13:21 PDT 2017 (using threaded interrupts)
[ 20.557177] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.22 Wed Oct 25 22:46:40 PDT 2017
[ 20.559189] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[ 20.559191] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0
[ 20.584422] usbcore: registered new interface driver snd-usb-audio
[ 20.697563] usbcore: registered new interface driver ath3k
[ 20.789297] usb 2-1.7: USB disconnect, device number 3
[ 20.870431] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input6
[ 20.870513] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input7
[ 20.870555] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input8
[ 20.870595] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input9
[ 21.951080] usb 2-1.7: new full-speed USB device number 4 using ehci-pci
[ 22.030166] usb 2-1.7: New USB device found, idVendor=0b05, idProduct=179c
[ 22.030168] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.040020] usbcore: registered new interface driver btusb
[ 22.045000] ath: EEPROM regdomain: 0x30
[ 22.045001] ath: EEPROM indicates we should expect a direct regpair map
[ 22.045002] ath: Country alpha2 being used: AM
[ 22.045002] ath: Regpair used: 0x30
[ 22.051749] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.052134] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffaf76425b0000, irq=18
[ 22.057072] ath9k 0000:09:00.0 wlp9s0: renamed from wlan0
[ 22.066800] intel_rapl: Found RAPL domain package
[ 22.066802] intel_rapl: Found RAPL domain core
[ 22.066805] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 23.558480] kauditd_printk_skb: 60 callbacks suppressed
[ 23.558481] audit: type=1130 audit(1512808916.142:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-sda5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.578043] audit: type=1130 audit(1512808916.162:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-f9e829f5\x2d2736\x2d4259\x2db51c\x2d9f958ea7f217 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.581074] audit: type=1130 audit(1512808916.165:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-disk-by\x2duuid-EED1\x2d023B comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.581319] audit: type=1130 audit(1512808916.165:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.582321] fuse init (API version 7.26)
[ 23.594562] EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: discard
[ 23.599165] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
[ 23.695968] audit: type=1130 audit(1512808916.279:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora_tron\x2droot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.734640] audit: type=1130 audit(1512808916.318:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-sdd1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.741599] audit: type=1130 audit(1512808916.325:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora_tron\x2dData comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 23.778756] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 23.818965] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.839665] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 24.167466] audit: type=1130 audit(1512808916.751:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.172321] audit: type=1130 audit(1512808916.756:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.172324] audit: type=1131 audit(1512808916.756:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 24.249480] RPC: Registered named UNIX socket transport module.
[ 24.249481] RPC: Registered udp transport module.
[ 24.249482] RPC: Registered tcp transport module.
[ 24.249482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 24.421360] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.421361] Bluetooth: BNEP filters: protocol multicast
[ 24.421364] Bluetooth: BNEP socket layer initialized
[ 24.972856] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 24.996317] Ebtables v2.0 registered
[ 25.026742] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 25.031116] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 25.287228] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 25.293942] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 25.310155] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 25.334773] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 25.364619] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 25.375731] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 25.379518] Netfilter messages via NETLINK v0.30.
[ 25.383511] ip_set: protocol 6
[ 26.018544] NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
[ 26.019249] nvidia-modeset: Allocated GPU:0 (GPU-0e32bf0b-9389-16af-e25b-909eb6ef48fa) @ PCI:0000:02:00.0
[ 28.058962] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 28.058999] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 368.059529] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 683.088002] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 998.095081] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1074.022267] Bluetooth: RFCOMM TTY layer initialized
[ 1074.022273] Bluetooth: RFCOMM socket layer initialized
[ 1074.022310] Bluetooth: RFCOMM ver 1.11
[ 1313.036843] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1628.061382] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 1943.099129] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2258.059885] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2573.101509] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 2888.103107] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3203.043394] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3518.106280] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 3833.069784] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4148.075594] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4463.077181] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 4778.051720] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5093.075110] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5408.084294] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 5723.056026] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6038.069198] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6353.086167] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6668.082421] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 6983.063367] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7298.079025] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7613.117605] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 7928.130213] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 8243.069585] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 8558.109235] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 8873.073861] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
[ 9188.103486] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready