Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Pas de son sur carte ICH9 Fedora25

ch.derenne

Bonjour,
J'utilise Fedora depuis la Core 1, et j'adore.
En général, pas de soucis et avec l'expérience, je me considère plutôt bon.
Mais là, je sèche, donc après 3h de recherche sur google (visiblement je ne suis pas le seul dans ce cas) , et essayer différentes choses, je pose ma question ici

Donc, c'est un PC avec une carte mère Asus PE5 qui dispose d'un chipset son ICH9 et dessus, j'ai une carte vidéo PCI Express ATI RV620 HDMI qui a aussi un chip son (pour le passage du son sur le canal HDMI mais elle, je m'en cogne qu'elle donne pas de son).
Sous Fedora 17 : j'avais du son, avec Fedora 20, j'avais du son.
Là, je suis passé à Fedora 25 : plus de son.

Le menu gnome affiche simplement sortie son factice.

Donc avec lshw, concernant le son (moi je veux que ça sorte sur le ICH9)

description: Audio device
product: RV620 HDMI Audio [Radeon HD 3450/3470/3550/3570]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:31 memory:fe9fc000-fe9fffff

et

description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:30 memory:fe8f8000-fe8fbfff

lspci | grep -i audio donne :

0:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV620 HDMI Audio [Radeon HD 3450/3470/3550/3570]

dmesg | grep -i audio donne :

[ 10.502668] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 10.783087] usbcore: registered new interface driver snd-usb-audio
[ 13.950051] cx231xx 2-4:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
[ 13.950054] cx231xx 2-4:1.1: Cx231xx Audio Extension initialized

et

lsmod | grep -i audio donne :

snd_usb_audio 180224 3
snd_usbmidi_lib 32768 1 snd_usb_audio
snd_hwdep 16384 2 snd_hda_codec,snd_usb_audio
snd_pcm 118784 6 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_hda_core,cx231xx_alsa,snd_hda_codec_hdmi
snd 86016 30 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_usb_audio,cx231xx_alsa,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_usbmidi_lib,snd_seq_device,snd_pcm

Tout semble ok, sauf que whaloou

Pour info, j'ai essayé avec alsa : idem

Si quelqu'un a une idée.

Christophe

Nicosss

Que retourne

$ pactl info

ainsi que

$ pactl list cards

Tu peux ensuite définir ta sortie si elle n'est pas bonne avec la commande suivante

$ pactl set-card-profile <numéro> output:<sortie_désirée>

Utilise les balises code <> pour que ce soit plus lisible.

ch.derenne

Bonjour et merci pour la réponse
alors
pactl info : c'est marrant, elle marche pas si je la lance en root ou sous un autre compte accéder en me connectant d'abord en root.
Donc en connexion direct avec un autre compte :

Server String: /run/user/1001/pulse/native
Library Protocol Version: 32
Server Protocol Version: 32
Is Local: yes
Client Index: 1
Tile Size: 65472
Server Name: pulseaudio
Server Version: 10.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: auto_null
Default Source: auto_null.monitor
Cookie: f8a1:42fc

pactl list cards
rien du tout (pas d'erreur mais retour vide)

si je fais
sudo pactl list cards (je fais partie de wheel)
Échec lors de la connexion : Connexion refusée
Échec de pa_context_connect() : Connexion refusée

Bizarre hein ?
je ne trouve pas ma carte son alors que lspci et lshw me la montre

VINDICATORs

tape :
setenforce 0
pour voir si ce n'est pas simplement selinux qui bloque les choses

Et ajoute ton user aux groupes "pulse...".

ch.derenne

usermod -a -G pulse cderenne

j'avais déjà (au cas où) désactivé selinux (pas bien !)
cat /etc/selinux/config
SELINUX=disabled
SELINUXTYPE=targeted

(loggé cderenne)

pactl list cards
Échec lors de la connexion : Connexion refusée
Échec de pa_context_connect() : Connexion refusée

Bizarre hein.
J'ai une vielle sounb blaster live en PCI sous la main, je l'ai insérée, avec, j'ai du son mais pas avec le chip son de ma carte mère (pour info, il est bien activé dans le bios des fois qu'on se pose la question)

VINDICATORs

pulse-rt et pulse-access à rajouter.

Après il est possible que ce soit un souci de droit directement sur les périphériques, à vérifier comme pour un dossier/fichier en root dans /dev/snd normalement.

ch.derenne

ls /dev/snd -l

Tous les fichiers fichiers présents sont en root-audio crw-rw------ (aucun dossier présent)

me suis mis dans les groupes pulse-rt et pulse-access

toujours pareil pour

avec mon user

pactl list cards
Échec lors de la connexion : Connexion refusée
Échec de pa_context_connect() : Connexion refusée

en sudo :
XDG_RUNTIME_DIR (/run/user/0) is not owned by us (uid 1000), but by uid 0! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)

Nicosss

T'es toujours fâché avec les balises code <> on dirait.

Est-ce que le serveur de son pulseaudio tourne au moins ?

VINDICATORs

Et en t'ajoutant au groupe "audio"? Ce qui serait étonnant, mais bon...

Ton installation était de zéro ou non?
Voir test en créant un nouvel utilisateur pour voir si cela ne vient pas d'autres chose.

ch.derenne

Bonjour,

Non pas fâché avec les <> faut juste dire si tu veux dire par là : exploiter le tag bbcode disponible par le bouton <> (dont l'icône est minuscule)
je pensais bien au bbcode mais juste au tag bold.

Bon sinon, comment je sais s'il tourne pulseaudio ?
parce que pulseaudio n'a pas l'air d'être monitoré par systemctl

J'ai bien trouvé :

pulseaudio --check

mais il ne me retourne rien
si j'ajoute

r=$? 
echo $r
1

ça me donne 1 (supposé donné 0 d'après ce que j'ai lu)
Mais ça ne veut rien dire car quand je fais la même chose sur un autre pc avec du son et fedora25, j'obtiens également 1

Alors je la joue à l'ancienne :

 ps -aux | grep pulse

Et là, je vois qu'il tourne :

gdm       1489  0.0  0.1 1395360 10828 ?       S<l  12:06   0:00 /usr/bin/pulseaudio --start --log-target=syslog

Merci en tout cas

Nicosss

Il suffisait de dire que tu n'avais pas compris pour les balises code <>.

D'après ta commande pulseaudio ne tourne pas sous ton utilisateur mais juste gdm.

Que retourne sous ton utilisateur

$ pulseaudio --check -v
$ pulseaudio -vv

Edit : Ajout de commandes

ch.derenne

J'ai bien vu qu'il tourne sous gdm
Mais je pensais que c'était un service système.

Alors (je suis alors loggé cderenne, pas root et je n'ai pas mis de sudo ):

pulseaudio --check -v
E: [pulseaudio] core-util.c: XDG_RUNTIME_DIR (/run/user/0) is not owned by us (uid 1000), but by uid 0! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
I: [pulseaudio] main.c: Daemon not running

pulseaudio -vv
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: setpriority() worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 10.0
D: [pulseaudio] main.c: Compilation host: x86_64-redhat-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 4.9.6-200.fc25.x86_64 #1 SMP Thu Jan 26 10:17:45 UTC 2017
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 1bfd438bfb6b44499cfb59ac12ea5b46.
I: [pulseaudio] main.c: Session ID is 4.
E: [pulseaudio] core-util.c: XDG_RUNTIME_DIR (/run/user/0) is not owned by us (uid 1000), but by uid 0! (This could e g happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)

Nicosss

Idem sous ton utilisateur

$ id
$ echo $XDG_RUNTIME_DIR
$ ll /run/user/
$ ll /run/user/1000/
$ pulseaudio --start -vv

Dans le retour de commande, en laissant le prompt et la commande lancée on verra si tu es utilisateur simple et que tu n'utilises pas sudo mais c'est bien de l'avoir précisé.

Fifi

@ch.derenne :
Quand on voit seulement le retour d'une commande ( entre balises code, ça c'est très bien ! ça aère le message 🙂 ) sans la commande elle-même avec le prompt, on se pose très souvent des questions et cela amène à redemander des infos et donc perte de temps.

Il faut prendre l'habitude de copier-coller tout ce qui est dans la console, le prompt, la commande et le retour complet de celle-ci, surtout si on est nouveau venu sur fedora-fr et qu'on ne connaît pas ton niveau et ton expérience avec linux et fedora en particulier.

Merci d'avance.

antbel

Bonjour, je pencherai pour un problème avec alsa et de modules non chargés ou mal configurés.
La chip audio est bien : AD1988B
C'est une installation vierge ou "upgradée"
Cela serait bien d'avoir le retour total de :
$ dmesg
$ aplay -L
# aplay -L

ch.derenne

Pour Nicoss tu sauras tout sur mon profil user :

[cderenne@cderenne ~]$ id
uid=1000(cderenne) gid=1000(cderenne) groupes=1000(cderenne),10(wheel),63(audio),171(pulse),979(vboxusers),993(pulse-rt),994(pulse-access)
[cderenne@cderenne ~]$

[cderenne@cderenne ~]$ echo $XDG_RUNTIME_DIR
/run/user/1000
[cderenne@cderenne ~]$

[cderenne@cderenne ~]$ ll /run/user/
total 0
drwx------ 8 cderenne cderenne 220 31 janv. 17:57 1000
drwx------ 6 gdm      gdm      180 31 janv. 11:34 42
[cderenne@cderenne ~]$

[cderenne@cderenne ~]$ ll /run/user/1000/
total 0
srw-rw-rw- 1 cderenne cderenne   0 31 janv. 16:27 bus
drwx------ 2 cderenne cderenne  60  1 févr. 06:29 dconf
drwx------ 3 cderenne cderenne  60 31 janv. 16:28 gnome-shell
dr-x------ 2 cderenne cderenne   0 31 janv. 16:28 gvfs
drwx------ 2 cderenne cderenne 100 31 janv. 16:28 keyring
drwx------ 2 cderenne cderenne  80 31 janv. 16:28 pulse
drwxr-xr-x 3 cderenne cderenne 100 31 janv. 16:27 systemd
srwxrwxr-x 1 cderenne cderenne   0 31 janv. 16:28 wayland-0
-rw-rw---- 1 cderenne cderenne   0 31 janv. 16:28 wayland-0.lock
[cderenne@cderenne ~]$

et enfin

[cderenne@cderenne ~]$ pulseaudio --start -vv
D: [pulseaudio] conf-parser.c: Parsing configuration file '/etc/pulse/client.conf'
D: [pulseaudio] conf-parser.c: /etc/pulse/client.conf.d does not exist, ignoring.
I: [pulseaudio] main.c: Daemon startup successful.

Et pour AntBel
Installation : si tu parles de l'OS oui, c'est une "fresh install" (pas d'upgrade)

aplay :
Tu vas voir : le chip hdmi audio inclu à ma carte vidéo (qui est en 1er)
Ma vielle SB live (et avec j'ai du son !) qui est là pour dépanner et tester en attendant
Mais pas de trace du chip audio de la carte mère

 aplay -L
null
    Discard all samples (playback) or generate zero samples (capture)
my_rate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
upmix51
    Upmixer channel expander
surround51
    Downmixer to stereo from surround51
surround40
    Downmixer to stereo from surround40
default
    Default ALSA Output (currently PulseAudio Sound Server)
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
sysdefault:CARD=Live
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    Default Audio Device
front:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    Front speakers
rear:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    Rear speakers
center_lfe:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    Center and Subwoofer speakers
surround21:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    2.1 Surround output to Front and Subwoofer speakers
surround41:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Live,DEV=0
    SB Live! Value [CT4832], ADC Capture/Standard PCM Playback
    5.0 Surround output to Front, Center and Rear speakers
iec958:CARD=Live,DEV=0
    SB Live! Value [CT4832], Multichannel Capture/PT Playback
    IEC958 (S/PDIF) Digital Audio Output

pour dmesg : on ne peut pas déposer un fichier ??? (trop gros)
en voici un extrait :

Tu y vois :
le chip audio de la carte mère (non nue avec alplay)
le chip audio (micro) de ma webcam (non vu avec aplay)
le chip audio de mon boitier d'aquisition vidéo (non vu avec aplay)
Tu n'y vois pas :
le chip audio de ma carte vidéo (pourtant vu avec aplay)
le chip audio de ma SB Live (vu avec aplay et fonctionnel !!)

dmesg | grep -i audio
[   12.655186] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   13.852898] usbcore: registered new interface driver snd-usb-audio
[   16.281493] cx231xx 2-4:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
[   16.281495] cx231xx 2-4:1.1: Cx231xx Audio Extension initialized

antbel

pour dmesg tu peux tout mettre c'est du texte , dans la base de donnée du forum cela ne prend pas beaucoup de place et l'expérience montre que c'est l'ensemble qui pourrait éventuellement indiquer une piste. D'autre part afin d'éviter de polluer ce dmesg retires ta "vielle sb" avant de rebooter
NB : J'ai un CM similaire à la tienne et pas de soucis avec le son c'est pourquoi je m'interroge.

$ dmesg > /home/user/dmesg.txt # ce qui te laisse toute latitude pour vérifier

Nicosss

Il ne semble pas y avoir de problème de droits sur les répertoires, ni côté variable d'environnement.

Après le pulseaudio --start, pulseaudio semble tourner cette fois. A contrôler dans les PID.
Les premières commandes avec pulseaudio et pactl devraient fonctionner du coup.

ch.derenne

Voilà un dmesg une fois la SB Live déposée

cat dmesg.txt
[    0.000000] microcode: microcode updated early to revision 0x70a, date = 2010-09-29
[    0.000000] Linux version 4.9.6-200.fc25.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Thu Jan 26 10:17:45 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.6-200.fc25.x86_64 root=/dev/mapper/fedora_cderenne-root ro rd.lvm.lv=fedora_cderenne/root rd.lvm.lv=fedora_cderenne/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5E Deluxe/P5E Deluxe, BIOS 0501    12/08/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask E00000000 write-back
[    0.000000]   3 base 200000000 mask FE0000000 write-back
[    0.000000]   4 base 220000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8987c00ff780]
[    0.000000] Base memory trampoline at [ffff8987c0099000] 99000 size 24576
[    0.000000] BRK [0x1fc284000, 0x1fc284fff] PGTABLE
[    0.000000] BRK [0x1fc285000, 0x1fc285fff] PGTABLE
[    0.000000] BRK [0x1fc286000, 0x1fc286fff] PGTABLE
[    0.000000] BRK [0x1fc287000, 0x1fc287fff] PGTABLE
[    0.000000] BRK [0x1fc288000, 0x1fc288fff] PGTABLE
[    0.000000] BRK [0x1fc289000, 0x1fc289fff] PGTABLE
[    0.000000] BRK [0x1fc28a000, 0x1fc28afff] PGTABLE
[    0.000000] BRK [0x1fc28b000, 0x1fc28bfff] PGTABLE
[    0.000000] BRK [0x1fc28c000, 0x1fc28cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35666000-0x36b2afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBD00 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000CFF80100 000054 (v01 A_M_I_ OEMXSDT  12000908 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000CFF80290 0000F4 (v03 A_M_I_ OEMFACP  12000908 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000CFF80440 00A0B5 (v01 A1033  A1033000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000CFF8E000 000040
[    0.000000] ACPI: FACS 0x00000000CFF8E000 000040
[    0.000000] ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC  12000908 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG  12000908 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM  12000908 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CFF8A500 000038 (v01 A_M_I_ OEMHPET  12000908 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000CFF8A540 0000B0 (v01 A_M_I_ OEMOSFR  12000908 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22ffe5000-0x22fffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cff7ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[    0.000000] On node 0 totalpages: 2096926
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847744 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1245184 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8989efc00000 s108888 r8192 d30376 u524288
[    0.000000] pcpu-alloc: s108888 r8192 d30376 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2064139
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.6-200.fc25.x86_64 root=/dev/mapper/fedora_cderenne-root ro rd.lvm.lv=fedora_cderenne/root rd.lvm.lv=fedora_cderenne/swap rhgb quiet LANG=fr_FR.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 8149576K/8387704K available (8327K kernel code, 1427K rwdata, 3396K rodata, 1688K init, 1464K bss, 238128K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:65792 nr_irqs:456 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2838.424 MHz processor
[    0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 5676.84 BogoMIPS (lpj=2838424)
[    0.001013] pid_max: default: 32768 minimum: 301
[    0.001030] ACPI: Core revision 20160831
[    0.006420] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.006467] Security Framework initialized
[    0.006469] Yama: becoming mindful.
[    0.006474] SELinux:  Initializing.
[    0.006495] SELinux:  Starting in permissive mode
[    0.007025] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010034] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011447] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.011457] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.011862] CPU: Physical Processor ID: 0
[    0.011863] CPU: Processor Core ID: 0
[    0.011865] mce: CPU supports 6 MCE banks
[    0.011872] CPU0: Thermal monitoring enabled (TM2)
[    0.011876] process: using mwait in idle threads
[    0.011880] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.011881] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.012227] Freeing SMP alternatives memory: 32K (ffffffffa510c000 - ffffffffa5114000)
[    0.014004] ftrace: allocating 31119 entries in 122 pages
[    0.022094] smpboot: Max logical packages: 1
[    0.022458] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.033000] APIC calibration not consistent with PM-Timer: 179ms instead of 100ms
[    0.033000] APIC delta adjusted to PM-Timer: 2087188 (3756885)
[    0.033000] smpboot: CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0x7)
[    0.033000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.033000] ... version:                2
[    0.033000] ... bit width:              40
[    0.033000] ... generic registers:      2
[    0.033000] ... value mask:             000000ffffffffff
[    0.033000] ... max period:             000000007fffffff
[    0.033000] ... fixed-purpose events:   3
[    0.033000] ... event mask:             0000000700000003
[    0.033000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.033050] x86: Booting SMP configuration:
[    0.033051] .... node  #0, CPUs:      #1 #2 #3
[    0.227027] x86: Booted up 1 node, 4 CPUs
[    0.227027] smpboot: Total of 4 processors activated (22707.75 BogoMIPS)
[    0.228428] devtmpfs: initialized
[    0.228428] x86/mm: Memory block size: 128MB
[    0.232201] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
[    0.232201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.232205] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.232206] pinctrl core: initialized pinctrl subsystem
[    0.232251] RTC time: 17:39:38, date: 02/01/17
[    0.232362] NET: Registered protocol family 16
[    0.234009] cpuidle: using governor menu
[    0.234067] ACPI: bus type PCI registered
[    0.234068] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.234151] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.234153] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.234160] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.234487] PCI: Using configuration type 1 for base access
[    0.238050] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.238084] ACPI: Added _OSI(Module Device)
[    0.238085] ACPI: Added _OSI(Processor Device)
[    0.238086] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.238086] ACPI: Added _OSI(Processor Aggregator Device)
[    0.238285] ACPI: Executed 1 blocks of module-level executable AML code
[    0.244099] ACPI: Dynamic OEM Table Load:
[    0.244104] ACPI: SSDT 0xFFFF8989E5D7EC00 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.244298] ACPI: Dynamic OEM Table Load:
[    0.244302] ACPI: SSDT 0xFFFF8989E5D7E000 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.244489] ACPI: Dynamic OEM Table Load:
[    0.244493] ACPI: SSDT 0xFFFF8989E5D7E800 000143 (v01 AMI    CPU3PM   00000001 INTL 20060113)
[    0.244677] ACPI: Dynamic OEM Table Load:
[    0.244681] ACPI: SSDT 0xFFFF8989E5D7E400 000143 (v01 AMI    CPU4PM   00000001 INTL 20060113)
[    0.244984] ACPI: Interpreter enabled
[    0.245004] ACPI: (supports S0 S1 S3 S4 S5)
[    0.245005] ACPI: Using IOAPIC for interrupt routing
[    0.245030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.251108] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.251112] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.251116] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.251319] PCI host bridge to bus 0000:00
[    0.251321] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.251322] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.251323] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.251325] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.251326] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    0.251328] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.251334] pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
[    0.251426] pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
[    0.251456] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.251496] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.251554] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.251589] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.251669] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.251710] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.251744] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.251825] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.251865] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.251899] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.251980] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.252030] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.252050] pci 0000:00:1a.7: reg 0x10: [mem 0xfe8ffc00-0xfe8fffff]
[    0.252126] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.252168] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.252211] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.252268] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.252315] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.252358] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.252415] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.252459] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.252501] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.252559] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.252603] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.252646] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.252680] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.252761] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.252802] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.252836] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.252917] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.252960] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.252994] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.253076] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.253123] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.253138] pci 0000:00:1d.7: reg 0x10: [mem 0xfe8ff800-0xfe8ffbff]
[    0.253209] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.253250] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.253292] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.253366] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.253409] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[    0.253477] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.253480] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.253483] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.253580] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[    0.253591] pci 0000:00:1f.2: reg 0x10: [io  0xa000-0xa007]
[    0.253597] pci 0000:00:1f.2: reg 0x14: [io  0x9c00-0x9c03]
[    0.253603] pci 0000:00:1f.2: reg 0x18: [io  0x9880-0x9887]
[    0.253609] pci 0000:00:1f.2: reg 0x1c: [io  0x9800-0x9803]
[    0.253615] pci 0000:00:1f.2: reg 0x20: [io  0x9480-0x948f]
[    0.253621] pci 0000:00:1f.2: reg 0x24: [io  0x9400-0x940f]
[    0.253715] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.253727] pci 0000:00:1f.3: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff 64bit]
[    0.253744] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.253827] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.253838] pci 0000:00:1f.5: reg 0x10: [io  0xb000-0xb007]
[    0.253844] pci 0000:00:1f.5: reg 0x14: [io  0xac00-0xac03]
[    0.253850] pci 0000:00:1f.5: reg 0x18: [io  0xa880-0xa887]
[    0.253856] pci 0000:00:1f.5: reg 0x1c: [io  0xa800-0xa803]
[    0.253862] pci 0000:00:1f.5: reg 0x20: [io  0xa480-0xa48f]
[    0.253868] pci 0000:00:1f.5: reg 0x24: [io  0xa400-0xa40f]
[    0.253996] pci 0000:01:00.0: [1002:95c5] type 00 class 0x030000
[    0.254012] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.254020] pci 0000:01:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9effff 64bit]
[    0.254026] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.254036] pci 0000:01:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.254076] pci 0000:01:00.0: supports D1 D2
[    0.254120] pci 0000:01:00.1: [1002:aa28] type 00 class 0x040300
[    0.254132] pci 0000:01:00.1: reg 0x10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[    0.254183] pci 0000:01:00.1: supports D1 D2
[    0.254235] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.254237] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.254239] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.254242] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.254280] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.254287] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.254343] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[    0.254365] pci 0000:03:00.0: reg 0x10: [mem 0xfebfc000-0xfebfffff 64bit]
[    0.254375] pci 0000:03:00.0: reg 0x18: [io  0xe800-0xe8ff]
[    0.254413] pci 0000:03:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.254471] pci 0000:03:00.0: supports D1 D2
[    0.254472] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257016] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.257020] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.257023] pci 0000:00:1c.2:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.257115] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
[    0.257160] pci 0000:02:00.0: reg 0x10: [io  0xdc00-0xdc07]
[    0.257172] pci 0000:02:00.0: reg 0x14: [io  0xd880-0xd883]
[    0.257184] pci 0000:02:00.0: reg 0x18: [io  0xd800-0xd807]
[    0.257196] pci 0000:02:00.0: reg 0x1c: [io  0xd480-0xd483]
[    0.257208] pci 0000:02:00.0: reg 0x20: [io  0xd400-0xd40f]
[    0.257231] pci 0000:02:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
[    0.257333] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.257341] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.257344] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.257347] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.257411] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.257418] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.257420] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.257421] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.257422] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.257424] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    0.258109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.258159] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.258208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.258257] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.258305] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.258355] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.258403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.258452] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.258508] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.258611] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.258611] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.258611] vgaarb: loaded
[    0.258611] vgaarb: bridge control possible 0000:01:00.0
[    0.258611] SCSI subsystem initialized
[    0.258611] libata version 3.00 loaded.
[    0.259011] ACPI: bus type USB registered
[    0.259031] usbcore: registered new interface driver usbfs
[    0.259039] usbcore: registered new interface driver hub
[    0.259063] usbcore: registered new device driver usb
[    0.259101] PCI: Using ACPI for IRQ routing
[    0.264120] PCI: pci_cache_line_size set to 64 bytes
[    0.264164] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.264165] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[    0.264264] NetLabel: Initializing
[    0.264265] NetLabel:  domain hash size = 128
[    0.264265] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.264280] NetLabel:  unlabeled traffic allowed by default
[    0.264295] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.264295] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.264295] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.266035] clocksource: Switched to clocksource hpet
[    0.277252] VFS: Disk quotas dquot_6.6.0
[    0.277275] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.277378] pnp: PnP ACPI init
[    0.277475] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.277479] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.277546] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.277769] pnp 00:02: [dma 2]
[    0.277814] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.277879] system 00:03: [io  0x0290-0x0297] has been reserved
[    0.277882] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278021] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.278023] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.278024] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.278026] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.278027] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.278029] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.278031] system 00:04: [mem 0xffa00000-0xffafffff] has been reserved
[    0.278032] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.278034] system 00:04: [mem 0xffe00000-0xffefffff] has been reserved
[    0.278035] system 00:04: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.278038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278137] system 00:05: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.278140] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278206] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.278208] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.278210] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278262] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.278322] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.278324] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278735] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.278737] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.278739] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.278740] system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.278743] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.278849] pnp: PnP ACPI: found 10 devices
[    0.287373] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.287389] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.287391] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[    0.287398] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.287404] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.287413] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.287415] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.287416] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.287418] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.287419] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.287421] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.287422] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.287424] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.287429] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
[    0.287433] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.287436] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.287438] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.287441] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.287442] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.287445] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.287447] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.287450] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.287452] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.287455] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    0.287458] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.287462] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.287464] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.287467] pci 0000:00:1c.2:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.287470] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.287474] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.287476] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.287480] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.287482] pci 0000:00:1c.4:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.287487] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.287495] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.287497] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.287498] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.287499] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.287501] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window]
[    0.287502] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.287503] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.287504] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.287506] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.287507] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[    0.287508] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.287509] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.287511] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.287512] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.287513] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.287514] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.287516] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.287517] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.287518] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.287519] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.287521] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.287522] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window]
[    0.287601] NET: Registered protocol family 2
[    0.287801] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.288000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.288313] TCP: Hash tables configured (established 65536 bind 65536)
[    0.288353] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.288396] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.288479] NET: Registered protocol family 1
[    0.289489] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.289497] PCI: CLS 32 bytes, default 64
[    0.289553] Unpacking initramfs...
[    0.609669] Freeing initrd memory: 21268K (ffff8987f5666000 - ffff8987f6b2b000)
[    0.609673] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.609675] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff89888bf80000-ffff89888ff7ffff]
[    0.610797] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.610839] audit: initializing netlink subsys (disabled)
[    0.610863] audit: type=2000 audit(1485970777.609:1): initialized
[    0.611182] Initialise system trusted keyrings
[    0.611348] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    0.613272] zbud: loaded
[    0.613880] SELinux:  Registering netfilter hooks
[    0.669439] NET: Registered protocol family 38
[    0.669443] Key type asymmetric registered
[    0.669444] Asymmetric key parser 'x509' registered
[    0.669493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.669569] io scheduler noop registered
[    0.669570] io scheduler deadline registered
[    0.669588] io scheduler cfq registered (default)
[    0.669890] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.670288] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.670293] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.670315] intel_idle: does not run on family 6 model 23
[    0.670401] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.670404] ACPI: Power Button [PWRB]
[    0.670444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.670446] ACPI: Power Button [PWRF]
[    0.670867] GHES: HEST is not enabled!
[    0.670964] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.673506] Non-volatile memory driver v1.3
[    0.673557] Linux agpgart interface v0.103
[    0.673986] ata_piix 0000:00:1f.2: version 2.13
[    0.674058] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.675017] scsi host0: ata_piix
[    0.675185] scsi host1: ata_piix
[    0.675238] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.675241] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.675310] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.676110] scsi host2: ata_piix
[    0.676268] scsi host3: ata_piix
[    0.676318] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.676321] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.676387] libphy: Fixed MDIO Bus: probed
[    0.676467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.676474] ehci-pci: EHCI PCI platform driver
[    0.676551] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.676615] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.676627] ehci-pci 0000:00:1a.7: debug port 1
[    0.680524] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.680535] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
[    0.687019] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.687083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.687086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.687087] usb usb1: Product: EHCI Host Controller
[    0.687089] usb usb1: Manufacturer: Linux 4.9.6-200.fc25.x86_64 ehci_hcd
[    0.687091] usb usb1: SerialNumber: 0000:00:1a.7
[    0.687259] hub 1-0:1.0: USB hub found
[    0.687265] hub 1-0:1.0: 6 ports detected
[    0.687486] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.687555] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.687564] ehci-pci 0000:00:1d.7: debug port 1
[    0.691449] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.691459] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe8ff800
[    0.698019] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.698059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.698061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.698063] usb usb2: Product: EHCI Host Controller
[    0.698064] usb usb2: Manufacturer: Linux 4.9.6-200.fc25.x86_64 ehci_hcd
[    0.698066] usb usb2: SerialNumber: 0000:00:1d.7
[    0.698213] hub 2-0:1.0: USB hub found
[    0.698219] hub 2-0:1.0: 6 ports detected
[    0.698360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.698363] ohci-pci: OHCI PCI platform driver
[    0.698374] uhci_hcd: USB Universal Host Controller Interface driver
[    0.698446] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.698510] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.698515] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.698537] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.698576] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.698578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.698579] usb usb3: Product: UHCI Host Controller
[    0.698580] usb usb3: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.698582] usb usb3: SerialNumber: 0000:00:1a.0
[    0.698705] hub 3-0:1.0: USB hub found
[    0.698711] hub 3-0:1.0: 2 ports detected
[    0.698866] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.698922] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.698927] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.698947] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.698987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.698989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.698990] usb usb4: Product: UHCI Host Controller
[    0.698991] usb usb4: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.698993] usb usb4: SerialNumber: 0000:00:1a.1
[    0.699126] hub 4-0:1.0: USB hub found
[    0.699131] hub 4-0:1.0: 2 ports detected
[    0.699276] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.699336] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.699341] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.699356] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.699393] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.699395] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.699396] usb usb5: Product: UHCI Host Controller
[    0.699397] usb usb5: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.699398] usb usb5: SerialNumber: 0000:00:1a.2
[    0.699522] hub 5-0:1.0: USB hub found
[    0.699528] hub 5-0:1.0: 2 ports detected
[    0.699674] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.699737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.699742] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.699757] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.699795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.699796] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.699797] usb usb6: Product: UHCI Host Controller
[    0.699799] usb usb6: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.699800] usb usb6: SerialNumber: 0000:00:1d.0
[    0.699924] hub 6-0:1.0: USB hub found
[    0.699929] hub 6-0:1.0: 2 ports detected
[    0.700088] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.700151] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.700156] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.700178] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.700222] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.700223] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.700224] usb usb7: Product: UHCI Host Controller
[    0.700226] usb usb7: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.700227] usb usb7: SerialNumber: 0000:00:1d.1
[    0.700351] hub 7-0:1.0: USB hub found
[    0.700357] hub 7-0:1.0: 2 ports detected
[    0.700501] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.700565] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.700570] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.700586] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.700625] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.700626] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.700628] usb usb8: Product: UHCI Host Controller
[    0.700629] usb usb8: Manufacturer: Linux 4.9.6-200.fc25.x86_64 uhci_hcd
[    0.700630] usb usb8: SerialNumber: 0000:00:1d.2
[    0.700749] hub 8-0:1.0: USB hub found
[    0.700754] hub 8-0:1.0: 2 ports detected
[    0.700879] usbcore: registered new interface driver usbserial
[    0.700886] usbcore: registered new interface driver usbserial_generic
[    0.700891] usbserial: USB Serial support registered for generic
[    0.700923] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.700924] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.701468] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.701577] mousedev: PS/2 mouse device common for all mice
[    0.701761] rtc_cmos 00:01: RTC can wake from S4
[    0.701917] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.701937] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.701993] device-mapper: uevent: version 1.0.3
[    0.702107] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.702599] hidraw: raw HID events driver (C) Jiri Kosina
[    0.702636] usbcore: registered new interface driver usbhid
[    0.702636] usbhid: USB HID core driver
[    0.702710] drop_monitor: Initializing network drop monitor service
[    0.702775] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.702813] Initializing XFRM netlink socket
[    0.702951] NET: Registered protocol family 10
[    0.703220] mip6: Mobile IPv6
[    0.703222] NET: Registered protocol family 17
[    0.703448] microcode: sig=0x10677, pf=0x10, revision=0x70a
[    0.703537] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.703770] registered taskstats version 1
[    0.703782] Loading compiled-in X.509 certificates
[    0.705737] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.706677] Loaded X.509 cert 'Fedora kernel signing key: 34ae686b57a59c0bf2b8c27b98287634b0f81bf8'
[    0.706702] zswap: loaded using pool lzo/zbud
[    0.716659] Key type big_key registered
[    0.718274] Key type encrypted registered
[    0.718504]   Magic number: 5:983:692
[    0.718608] rtc_cmos 00:01: setting system clock to 2017-02-01 17:39:38 UTC (1485970778)
[    0.718644] PM: Hibernation image not present or could not be loaded.
[    0.991854] ata3: SATA link down (SStatus 0 SControl 300)
[    1.000018] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    1.002464] ata4: SATA link down (SStatus 0 SControl 300)
[    1.008015] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.155832] usb 1-6: New USB device found, idVendor=0bda, idProduct=0161
[    1.155834] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.155836] usb 1-6: Product: USB2.0-CRW
[    1.155838] usb 1-6: Manufacturer: Generic
[    1.155839] usb 1-6: SerialNumber: 20070818000000000
[    1.200629] usb 2-1: New USB device found, idVendor=046d, idProduct=082b
[    1.200631] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.200633] usb 2-1: Product: Webcam C170
[    1.200635] usb 2-1: Manufacturer:  
[    1.303900] ata2.00: SATA link down (SStatus 0 SControl 300)
[    1.303910] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.309014] usb 2-3: new high-speed USB device number 3 using ehci-pci
[    1.428153] usb 2-3: New USB device found, idVendor=04e8, idProduct=3321
[    1.428155] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.428156] usb 2-3: Product: M2020 Series
[    1.428157] usb 2-3: Manufacturer: Samsung Electronics Co., Ltd.
[    1.428158] usb 2-3: SerialNumber: ZF47B8GF6C02BJD
[    1.448062] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.448071] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.469354] ata1.00: HPA detected: current 976771055, native 976773168
[    1.469359] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-13, max UDMA7
[    1.469361] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.471884] ata1.00: configured for UDMA/133
[    1.472087] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  0-13 PQ: 0 ANSI: 5
[    1.480213] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.480223] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    1.480292] sd 0:0:0:0: [sda] Write Protect is off
[    1.480294] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.480319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.484765]  sda: sda1 sda2
[    1.485113] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.486654] Freeing unused kernel memory: 1688K (ffffffffa4f66000 - ffffffffa510c000)
[    1.486655] Write protecting the kernel read-only data: 14336k
[    1.487373] Freeing unused kernel memory: 1896K (ffff8989bb826000 - ffff8989bba00000)
[    1.489020] Freeing unused kernel memory: 700K (ffff8989bbd51000 - ffff8989bbe00000)
[    1.496667] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.500776] random: systemd: uninitialized urandom read (16 bytes read)
[    1.501035] random: systemd: uninitialized urandom read (16 bytes read)
[    1.501047] random: systemd: uninitialized urandom read (16 bytes read)
[    1.503201] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.503340] systemd[1]: Detected architecture x86-64.
[    1.503343] systemd[1]: Running in initial RAM disk.
[    1.503357] systemd[1]: Set hostname to <cderenne.acpn.net>.
[    1.532038] usb 2-4: new high-speed USB device number 4 using ehci-pci
[    1.540214] random: systemd: uninitialized urandom read (16 bytes read)
[    1.540235] random: systemd: uninitialized urandom read (16 bytes read)
[    1.540262] random: systemd: uninitialized urandom read (16 bytes read)
[    1.540311] random: systemd: uninitialized urandom read (16 bytes read)
[    1.540839] random: systemd: uninitialized urandom read (16 bytes read)
[    1.541065] random: systemd: uninitialized urandom read (16 bytes read)
[    1.541323] random: systemd: uninitialized urandom read (16 bytes read)
[    1.545390] systemd[1]: Listening on Journal Audit Socket.
[    1.545431] systemd[1]: Reached target Swap.
[    1.545814] systemd[1]: Created slice System Slice.
[    1.545856] systemd[1]: Listening on udev Control Socket.
[    1.545882] systemd[1]: Listening on udev Kernel Socket.
[    1.545926] systemd[1]: Listening on Journal Socket.
[    1.553521] audit: type=1130 audit(1485970779.333:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    1.560899] audit: type=1130 audit(1485970779.340:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.565676] audit: type=1130 audit(1485970779.345:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.595694] audit: type=1130 audit(1485970779.375:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.632016] tsc: Refined TSC clocksource calibration: 2838.579 MHz
[    1.632022] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28ea9ca32eb, max_idle_ns: 440795214205 ns
[    1.639598] audit: type=1130 audit(1485970779.419:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.643787] audit: type=1130 audit(1485970779.423:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.652510] usb 2-4: New USB device found, idVendor=1d19, idProduct=6109
[    1.652512] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.652514] usb 2-4: Product: Video Grabber
[    1.652515] usb 2-4: Manufacturer: DK
[    1.652516] usb 2-4: SerialNumber: 0000000000
[    1.665966] audit: type=1130 audit(1485970779.445:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.670728] audit: type=1130 audit(1485970779.450:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.730232] audit: type=1130 audit(1485970779.510:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    1.732398] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.754197] usb-storage 1-6:1.1: USB Mass Storage device detected
[    1.754973] scsi host4: usb-storage 1-6:1.1
[    1.755361] usbcore: registered new interface driver usb-storage
[    1.756778] sky2: driver version 1.30
[    1.757545] usbcore: registered new interface driver uas
[    1.757569] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[    1.758025] sky2 0000:03:00.0 eth0: addr 00:22:15:21:c1:f3
[    1.758731] scsi host5: pata_jmicron
[    1.758841] scsi host6: pata_jmicron
[    1.758890] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[    1.758891] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[    1.759211] [drm] Initialized
[    1.801492] sky2 0000:03:00.0 enp3s0: renamed from eth0
[    1.845162] [drm] radeon kernel modesetting enabled.
[    1.848049] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.848050] AMD IOMMUv2 functionality not available on this system
[    1.856461] CRAT table not found
[    1.856462] Finished initializing topology ret=0
[    1.856478] kfd kfd: Initialized module
[    1.857035] [drm] initializing kernel modesetting (RV620 0x1002:0x95C5 0x174B:0xE530 0x00).
[    1.857050] [drm] register mmio base: 0xFE9E0000
[    1.857052] [drm] register mmio size: 65536
[    1.857115] ATOM BIOS: 11X
[    1.857133] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    1.857134] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    1.857138] [drm] Detected VRAM RAM=256M, BAR=256M
[    1.857138] [drm] RAM width 64bits DDR
[    1.857207] [TTM] Zone  kernel: Available graphics memory: 4087580 kiB
[    1.857208] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.857209] [TTM] Initializing pool allocator
[    1.857214] [TTM] Initializing DMA pool allocator
[    1.857239] [drm] radeon: 256M of VRAM memory ready
[    1.857240] [drm] radeon: 512M of GTT memory ready.
[    1.857253] [drm] Loading RV620 Microcode
[    1.857325] [drm] Internal thermal controller with fan control
[    1.857364] [drm] radeon: power management initialized
[    1.857427] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    1.857933] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.883696] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000).
[    1.883738] radeon 0000:01:00.0: WB enabled
[    1.883741] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8989e0b08c00
[    1.884079] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffa230014121d0
[    1.884081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.884082] [drm] Driver supports precise vblank timestamp query.
[    1.884083] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.884129] radeon 0000:01:00.0: radeon: using MSI.
[    1.884158] [drm] radeon: irq initialized.
[    1.915910] [drm] ring test on 0 succeeded in 0 usecs
[    1.926521] ata5.01: ATAPI: ASUS    DVD-E616A, 1.07, max UDMA/100
[    1.931428] ata5.01: configured for UDMA/100
[    1.934610] scsi 5:0:1:0: CD-ROM            ASUS     DVD-E616A        1.07 PQ: 0 ANSI: 5
[    1.944061] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    1.959442] sr 5:0:1:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[    1.959444] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.959585] sr 5:0:1:0: Attached scsi CD-ROM sr0
[    1.959658] sr 5:0:1:0: Attached scsi generic sg1 type 5
[    2.091958] [drm] ring test on 5 succeeded in 1 usecs
[    2.091963] [drm] UVD initialized successfully.
[    2.092269] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.117192] usb 8-2: New USB device found, idVendor=046d, idProduct=c534
[    2.117194] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.117196] usb 8-2: Product: USB Receiver
[    2.117197] usb 8-2: Manufacturer: Logitech
[    2.125604] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C534.0001/input/input3
[    2.177213] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    2.182077] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C534.0002/input/input4
[    2.234164] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    2.254935] random: fast init done
[    2.640076] clocksource: Switched to clocksource tsc
[    2.744024] [drm] ib test on ring 5 succeeded
[    2.744386] [drm] Radeon Display Connectors
[    2.744387] [drm] Connector 0:
[    2.744387] [drm]   VGA-1
[    2.744389] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    2.744389] [drm]   Encoders:
[    2.744390] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.744390] [drm] Connector 1:
[    2.744391] [drm]   DVI-I-1
[    2.744391] [drm]   HPD1
[    2.744393] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.744393] [drm]   Encoders:
[    2.744394] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.744394] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[    2.744395] [drm] Connector 2:
[    2.744395] [drm]   HDMI-A-1
[    2.744396] [drm]   HPD2
[    2.744397] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.744397] [drm]   Encoders:
[    2.744398] [drm]     DFP1: INTERNAL_UNIPHY
[    2.788090] scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    2.791976] scsi 4:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    2.795966] scsi 4:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    2.799844] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    2.804174] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.805514] sd 4:0:0:1: Attached scsi generic sg3 type 0
[    2.806335] sd 4:0:0:2: Attached scsi generic sg4 type 0
[    2.806380] [drm] fb mappable at 0xD0243000
[    2.806381] [drm] vram apper at 0xD0000000
[    2.806381] [drm] size 8294400
[    2.806382] [drm] fb depth is 24
[    2.806383] [drm]    pitch is 7680
[    2.806558] fbcon: radeondrmfb (fb0) is primary device
[    2.806660] sd 4:0:0:3: Attached scsi generic sg5 type 0
[    2.827504] Console: switching to colour frame buffer device 240x67
[    2.831970] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.848236] [drm] Initialized radeon 2.48.0 20080528 for 0000:01:00.0 on minor 0
[    2.853459] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    2.855112] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[    2.855712] sd 4:0:0:3: [sde] Attached SCSI removable disk
[    2.856838] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[    3.350123] random: crng init done
[    3.387532] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    3.786514] systemd-journald[170]: Received SIGTERM from PID 1 (systemd).
[    3.967784] systemd: 20 output lines suppressed due to ratelimiting
[    4.573312] SELinux:  Disabled at runtime.
[    4.573335] SELinux:  Unregistering netfilter hooks
[    6.420543] audit_printk_skb: 90 callbacks suppressed
[    6.420545] audit: type=1130 audit(1485970784.200:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.420560] audit: type=1131 audit(1485970784.200:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.420815] audit: type=1130 audit(1485970784.200:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.420828] audit: type=1131 audit(1485970784.200:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.421407] audit: type=1130 audit(1485970784.201:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.421420] audit: type=1131 audit(1485970784.201:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.515513] audit: type=1130 audit(1485970784.295:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.626129] EXT4-fs (dm-0): re-mounted. Opts: (null)
[    6.626986] audit: type=1130 audit(1485970784.406:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.713456] audit: type=1305 audit(1485970784.494:49): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[    6.929810] audit: type=1130 audit(1485970784.709:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.400399] vboxdrv: loading out-of-tree module taints kernel.
[    8.400588] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    8.401955] vboxdrv: Found 4 processor cores
[    8.402246] vboxdrv: fAsync=0 offMin=0x29f offMax=0x4d08
[    8.502350] vboxdrv: TSC mode is Synchronous, tentative frequency 2838578883 Hz
[    8.502351] vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
[    8.549791] VBoxNetFlt: Successfully started.
[    8.576720] VBoxNetAdp: Successfully started.
[    8.627587] VBoxPciLinuxInit
[    8.627590] vboxpci: IOMMU not found (not registered)
[    8.653739] RPC: Registered named UNIX socket transport module.
[    8.653740] RPC: Registered udp transport module.
[    8.653741] RPC: Registered tcp transport module.
[    8.653742] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.840227] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.245420] EDAC MC: Ver: 3.0.0
[   11.252755] EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
[   11.406043] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.581375] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BA (\GPS0) (20160831/utaddress-247)
[   11.581380] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.581381] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BA (\GPS0) (20160831/utaddress-247)
[   11.581384] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.581385] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.266423] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20160831/utaddress-247)
[   12.266429] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.861311] media: Linux media interface: v0.10
[   12.871317] usbcore: registered new interface driver mceusb
[   12.916624] Linux video capture interface: v2.00
[   13.032107] usbcore: registered new interface driver snd-usb-audio
[   13.165797] intel_powerclamp: No package C-state available
[   13.270174] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[   13.276845] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized!
[   13.276848] uvcvideo 2-1:1.0: Entity type for entity Extension 6 was not initialized!
[   13.276851] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
[   13.276958] input: Webcam C170 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/input/input5
[   13.277037] usbcore: registered new interface driver uvcvideo
[   13.277038] USB Video Class driver (1.1.1)
[   13.339549] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   13.354436] usblp 2-3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[   13.354462] usbcore: registered new interface driver usblp
[   13.452153] iTCO_vendor_support: vendor-support=0
[   13.488958] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.488994] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[   13.489121] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.491586] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[   14.132060] cx231xx 2-4:1.1: New device DK Video Grabber @ 480 Mbps (1d19:6109) with 6 interfaces
[   14.132134] cx231xx 2-4:1.1: Identified as Pixelview Xcapture USB (card=11)
[   14.132486] i2c i2c-6: Added multiplexed i2c bus 8
[   14.132511] i2c i2c-6: Added multiplexed i2c bus 9
[   14.407245] audit_printk_skb: 21 callbacks suppressed
[   14.407247] audit: type=1130 audit(1485970792.187:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.556508] cx25840 5-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
[   14.649483] Adding 8306684k swap on /dev/mapper/fedora_cderenne-swap.  Priority:-1 extents:1 across:8306684k FS
[   16.486196] audit: type=1130 audit(1485970794.266:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.530506] cx25840 5-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
[   16.564508] cx231xx 2-4:1.1: v4l2 driver version 0.0.3
[   16.569078] audit: type=1130 audit(1485970794.349:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.654979] cx231xx 2-4:1.1: Registered video device video1 [v4l2]
[   16.655035] cx231xx 2-4:1.1: Registered VBI device vbi0
[   16.655038] cx231xx 2-4:1.1: video EndPoint Addr 0x84, Alternate settings: 5
[   16.655041] cx231xx 2-4:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
[   16.655043] cx231xx 2-4:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
[   16.659091] usbcore: registered new interface driver cx231xx
[   16.749322] systemd-journald[589]: Received request to flush runtime journal from PID 1
[   16.750103] audit: type=1130 audit(1485970794.530:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.762316] cx231xx 2-4:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
[   16.762318] cx231xx 2-4:1.1: Cx231xx Audio Extension initialized
[   16.827671] audit: type=1130 audit(1485970794.607:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.758744] audit: type=1130 audit(1485970795.538:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.758767] audit: type=1131 audit(1485970795.538:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.085297] audit: type=1130 audit(1485970796.865:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-fedora_cderenne\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.151443] audit: type=1130 audit(1485970796.931:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-7d2b2d32\x2d15fb\x2d4189\x2db20d\x2df867b1af30d1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.249567] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.442590] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   19.510325] audit: type=1130 audit(1485970797.290:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.510341] audit: type=1131 audit(1485970797.290:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.521473] audit: type=1130 audit(1485970797.301:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.597050] audit: type=1130 audit(1485970797.377:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.597063] audit: type=1131 audit(1485970797.377:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.638110] audit: type=1130 audit(1485970797.418:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.794849] audit: type=1130 audit(1485970797.574:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.053961] audit: type=1305 audit(1485970797.834:74): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[   20.053976] audit: type=1305 audit(1485970797.834:75): audit_pid=857 old=0 auid=4294967295 ses=4294967295 res=1
[   29.777292] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   30.396316] Ebtables v2.0 registered
[   30.879078] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   33.713980] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   34.003521] Netfilter messages via NETLINK v0.30.
[   34.033974] ip_set: protocol 6
[   35.108025] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   35.110979] sky2 0000:03:00.0 enp3s0: enabling interface
[   35.111058] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   37.164972] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[   37.164989] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   37.402031] smfpnetdiscover[1188]: segfault at 8 ip 00007ff2ef9974a1 sp 00007ffdcc22f920 error 4 in ld-2.24.so[7ff2ef98b000+25000]
[   45.830414] tun: Universal TUN/TAP device driver, 1.6
[   45.830416] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   45.866069] virbr0: port 1(virbr0-nic) entered blocking state
[   45.866073] virbr0: port 1(virbr0-nic) entered disabled state
[   45.866153] device virbr0-nic entered promiscuous mode
[   48.648792] virbr0: port 1(virbr0-nic) entered blocking state
[   48.648794] virbr0: port 1(virbr0-nic) entered listening state
[   49.024892] virbr0: port 1(virbr0-nic) entered disabled state
[   53.031019] usb 2-5: new high-speed USB device number 6 using ehci-pci
[   53.150698] usb 2-5: New USB device found, idVendor=059b, idProduct=027a
[   53.150700] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   53.150702] usb 2-5: Product: Iomega HDD USB2.0 Drive
[   53.150704] usb 2-5: Manufacturer: Iomega
[   53.150706] usb 2-5: SerialNumber: S07I2501A00000043155
[   53.151612] usb-storage 2-5:1.0: USB Mass Storage device detected
[   53.151856] scsi host7: usb-storage 2-5:1.0
[   54.177125] scsi 7:0:0:0: Direct-Access     Ext Hard  Disk                 PQ: 0 ANSI: 4
[   54.177588] sd 7:0:0:0: Attached scsi generic sg6 type 0
[   54.178203] sd 7:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[   54.178599] sd 7:0:0:0: [sdf] Write Protect is off
[   54.178602] sd 7:0:0:0: [sdf] Mode Sense: 10 00 00 00
[   54.179001] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   54.284392]  sdf: sdf1 sdf2
[   54.286394] sd 7:0:0:0: [sdf] Attached SCSI disk
[   56.676462] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[   79.803149] fuse init (API version 7.26)

antbel

Salut
Peut-être revoir la configuration du BIOS avec la gestion acpi ?

je ne vois pas apparaitre une ligne du style

PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

Page suivante »