smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.5.5-300.fc24.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model: ST3120026AS
Serial Number: 3JT31ME9
Firmware Version: 3.05
User Capacity: 120 034 123 776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
Local Time is: Mon Oct 24 17:54:48 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 059 055 006 Pre-fail Always - 175761161
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 389
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 645853118
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 9785
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 092 092 020 Old_age Always - 8938
194 Temperature_Celsius 0x0022 041 056 000 Old_age Always - 41
195 Hardware_ECC_Recovered 0x001a 059 055 000 Old_age Always - 175761161
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 3875
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1806 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1806 occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 83 92 5e e0 Error: UNC 4 sectors at LBA = 0x005e9283 = 6197891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 7f 92 5e e0 00 00:03:19.314 READ DMA
c8 d8 01 00 00 00 e0 00 00:03:19.307 READ DMA
c8 d8 08 7f 92 5e e0 00 00:03:19.304 READ DMA
c8 d8 01 00 00 00 e0 00 00:02:46.006 READ DMA
c8 d8 08 87 92 5e e0 00 00:03:31.004 READ DMA
Error 1805 occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 83 92 5e e0 Error: UNC 4 sectors at LBA = 0x005e9283 = 6197891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 7f 92 5e e0 00 00:03:19.314 READ DMA
c8 d8 01 00 00 00 e0 00 00:03:19.307 READ DMA
c8 d8 08 87 92 5e e0 00 00:03:19.304 READ DMA
c8 d8 08 7f 92 5e e0 00 00:02:46.006 READ DMA
c8 d8 08 7f 92 5e e0 00 00:02:45.985 READ DMA
Error 1804 occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 83 92 5e e0 Error: UNC 4 sectors at LBA = 0x005e9283 = 6197891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 7f 92 5e e0 00 00:03:19.314 READ DMA
c8 d8 08 7f 92 5e e0 00 00:03:19.307 READ DMA
c8 d8 08 3f 00 5e e0 00 00:03:19.304 READ DMA
c8 d8 08 47 00 5e e0 00 00:02:46.006 READ DMA
c8 d8 08 37 00 5e e0 00 00:02:45.985 READ DMA
Error 1803 occurred at disk power-on lifetime: 5943 hours (247 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 83 92 5e e0 Error: UNC 4 sectors at LBA = 0x005e9283 = 6197891
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d8 08 7f 92 5e e0 00 00:03:19.314 READ DMA
c8 d8 08 3f 00 5e e0 00 00:03:19.307 READ DMA
c8 d8 08 47 00 5e e0 00 00:03:19.304 READ DMA
c8 d8 08 37 00 5e e0 00 00:02:46.006 READ DMA
c8 d8 08 2f 00 5e e0 00 00:02:45.985 READ DMA
Error 1802 occurred at disk power-on lifetime: 5942 hours (247 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 7f 92 5e e0 Error: UNC at LBA = 0x005e927f = 6197887
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 d8 08 7f 92 5e e0 00 00:00:37.705 READ MULTIPLE
c4 d8 01 00 00 00 e0 00 00:00:37.704 READ MULTIPLE
c4 d8 08 7f 92 5e e0 00 00:00:37.702 READ MULTIPLE
c4 d8 01 00 00 00 e0 00 00:00:37.689 READ MULTIPLE
c4 d8 08 87 92 5e e0 00 00:00:37.673 READ MULTIPLE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.