Bonjours,
J'ouvre ce post étant donner que je n'arrive pas à avoir mes infos sur ma cg depuis sensors.
J'ai bien fais un sensors-detect, mais rien sur ma cg.
Voici le retour de commande sensors
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 124.77 W (crit = 125.02 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +17.1°C (high = +70.0°C)
(crit = +80.0°C, hyst = +77.0°C)
it8620-isa-0228
Adapter: ISA adapter
in0: +0.94 V (min = +0.00 V, max = +3.06 V)
in1: +1.51 V (min = +0.00 V, max = +3.06 V)
in2: +2.03 V (min = +0.00 V, max = +3.06 V)
in3: +1.98 V (min = +0.00 V, max = +3.06 V)
in4: +2.02 V (min = +0.00 V, max = +3.06 V)
in5: +1.20 V (min = +0.00 V, max = +3.06 V)
in6: +2.22 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: +2.93 V
fan1: 1132 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 1275 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 794 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +38.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +17.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: OK
Un rapide lshw me donne ceci sur la CG (
MSI R9 390 Gaming 2G):
*-pci:0
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port B)
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:e000(size=4096) memory:fea00000-feafffff ioport:c0000000(size=270532608)
Merci pour toute réponse.
Edit : solution pour les drivers libre =>
il faut un kernel 4.5 ou supérieur. En dessous, point de prise en charge du drivers amdgpu.