Bonjour à tous,
J'ai un petit soucis de Wifi sur mon HP EliteBook 840 G2 et n'étant pas encore un 'AS' côté matériel sur linux je fais appel à votre aide.
Voici les infos que j'ai :
uname -a >
Linux teraclope 4.2.5-300.fc23.x86_64 #1 SMP Tue Oct 27 04:29:56 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
La partie dmesg avec des erreurs :
dmesg >
[ 4.147309] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.151343] Intel(R) Wireless WiFi driver for Linux
[ 4.151345] Copyright(c) 2003- 2015 Intel Corporation
[ 4.152731] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-15.ucode failed with error -2
[ 4.152746] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-14.ucode failed with error -2
[ 4.152758] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-13.ucode failed with error -2
[ 4.152770] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-12.ucode failed with error -2
[ 4.152772] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-12.ucode' failed.
[ 4.152840] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-11.ucode failed with error -2
[ 4.152843] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-11.ucode' failed.
[ 4.152909] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-10.ucode failed with error -2
[ 4.152911] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-10.ucode' failed.
[ 4.152963] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 4.293592] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 4.309473] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.309476] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 48:0f:cf:27:60:3f
[ 4.309477] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.309500] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.310092] [drm] Memory usable by graphics device = 4096M
[ 4.310095] [drm] Replacing VGA console driver
[ 4.310164] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 4.310695] Console: switching to colour dummy device 80x25
[ 4.311068] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 4.317239] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.317242] [drm] Driver supports precise vblank timestamp query.
[ 4.317353] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.343887] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.345991] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 4.346056] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 4.348925] fbcon: inteldrmfb (fb0) is primary device
[ 4.458230] usb 1-3: New USB device found, idVendor=0424, idProduct=2134
[ 4.458240] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.458241] usb 1-3: Product: USB2134B
[ 4.458242] usb 1-3: Manufacturer: SMSC
[ 4.458696] hub 1-3:1.0: USB hub found
[ 4.458757] hub 1-3:1.0: 4 ports detected
[ 4.459269] usb: failed to peer 1-3-port1 and usb2-port1 by location (1-3-port1:none) (usb2-port1:usb1-port1)
[ 4.459270] usb 1-3-port1: failed to peer to usb2-port1 (-16)
[ 4.459413] usb: failed to peer 1-3-port3 and usb2-port2 by location (1-3-port3:none) (usb2-port2:usb1-port2)
[ 4.459414] usb 1-3-port3: failed to peer to usb2-port2 (-16)
[ 4.503700] tsc: Refined TSC clocksource calibration: 2593.994 MHz
[ 4.503702] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
[ 4.573787] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
[ 4.613778] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 4.780466] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.780467] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.851937] usb 1-3.4: new full-speed USB device number 5 using xhci_hcd
[ 4.939808] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c52b
[ 4.939809] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.939810] usb 1-3.4: Product: USB Receiver
[ 4.939811] usb 1-3.4: Manufacturer: Logitech
[ 5.089068] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[ 5.254524] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
[ 5.254525] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.254526] usb 1-5: SerialNumber: 00204a6c4480
[ 5.348671] psmouse serio3: synaptics: queried max coordinates: x [..5668], y [..4762]
[ 5.382356] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
[ 5.408278] usb 1-7: new high-speed USB device number 7 using xhci_hcd
[ 5.425463] Console: switching to colour frame buffer device 200x56
[ 5.429310] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 5.430601] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.430602] i915 0000:00:02.0: registered panic notifier
[ 5.440599] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1658220
dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x18, date = 2014-12-05
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.5-300.fc23.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Tue Oct 27 04:29:56 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.5-300.fc23.x86_64 root=/dev/mapper/fedora_teraclope-root ro rd.lvm.lv=fedora_teraclope/root rd.lvm.lv=fedora_teraclope/swap rhgb quiet LANG=fr_FR.UTF-8
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ab7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ab7f000-0x000000008be7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008be7f000-0x000000008bf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008bf7f000-0x000000008bffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008bfff000-0x000000008bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c000000-0x00000000ae7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G2/2216, BIOS M71 Ver. 01.04 02/24/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x24f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF000000 mask 7FFF000000 write-protect
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0080000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0088000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 008C000000 mask 7FFE000000 uncachable
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7FC0000000 write-back
[ 0.000000] 7 base 0240000000 mask 7FE0000000 write-back
[ 0.000000] 8 base 0250000000 mask 7FF0000000 uncachable
[ 0.000000] 9 base 024F800000 mask 7FFF800000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8c000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02043000, 0x02043fff] PGTABLE
[ 0.000000] BRK [0x02044000, 0x02044fff] PGTABLE
[ 0.000000] BRK [0x02045000, 0x02045fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24f600000-0x24f7fffff]
[ 0.000000] [mem 0x24f600000-0x24f7fffff] page 2M
[ 0.000000] BRK [0x02046000, 0x02046fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x24f5fffff]
[ 0.000000] [mem 0x240000000-0x24f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8ab7efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8a9fffff] page 2M
[ 0.000000] [mem 0x8aa00000-0x8ab7efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8bfff000-0x8bffffff]
[ 0.000000] [mem 0x8bfff000-0x8bffffff] page 4k
[ 0.000000] BRK [0x02047000, 0x02047fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x359a1000-0x36cc8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC2A0 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000008BFFD0E8 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000008BFFB000 00010C (v05 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000008BFCF000 02683E (v02 HPQOEM 2216 00000001 INTL 20130927)
[ 0.000000] ACPI: FACS 0x000000008BF76000 000040
[ 0.000000] ACPI: HPET 0x000000008BFFA000 000038 (v01 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000008BFF9000 0000BC (v01 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000008BFF8000 00003C (v01 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000008BFF6000 000032 (v02 HPQOEM 2216 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000008BFCC000 0002D9 (v01 HPQOEM SataAhci 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000008BFCB000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927)
[ 0.000000] ACPI: SLIC 0x000000008BFCA000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: MSDM 0x000000008BFC9000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000008BFC8000 000044 (v01 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000008BFC7000 000038 (v00 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000008BFC3000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000008BFC2000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000008BFC1000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x000000008BFC0000 000913 (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: ASF! 0x000000008BFF7000 0000A5 (v32 HPQOEM 2216 00000001 HP 00000001)
[ 0.000000] ACPI: DMAR 0x000000008BFBF000 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x24f7ea000-0x24f7fdfff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247600000-ffff88024edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000024f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008ab7efff]
[ 0.000000] node 0: [mem 0x000000008bfff000-0x000000008bffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000024f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f7fffff]
[ 0.000000] On node 0 totalpages: 1942300
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8814 pages used for memmap
[ 0.000000] DMA32 zone: 564096 pages, LIFO batch:31
[ 0.000000] Normal zone: 21472 pages used for memmap
[ 0.000000] Normal zone: 1374208 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x8e800000-0xae7fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ab7f000-0x8be7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8be7f000-0x8bf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8bf7f000-0x8bffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c000000-0xae7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xae800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff600000-0xffffffff]
[ 0.000000] e820: [mem 0xae800000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88024f400000 s97048 r8192 d29928 u262144
[ 0.000000] pcpu-alloc: s97048 r8192 d29928 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1911929
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.5-300.fc23.x86_64 root=/dev/mapper/fedora_teraclope-root ro rd.lvm.lv=fedora_teraclope/root rd.lvm.lv=fedora_teraclope/swap rhgb quiet LANG=fr_FR.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 7542496K/7769200K available (7672K kernel code, 1264K rwdata, 3336K rodata, 1512K init, 1544K bss, 226704K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:65792 nr_irqs:760 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.818 MHz processor
[ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.63 BogoMIPS (lpj=2593818)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000035] ACPI: Core revision 20150619
[ 0.013583] ACPI: All ACPI Tables successfully acquired
[ 0.013604] Security Framework initialized
[ 0.013606] SELinux: Initializing.
[ 0.013611] SELinux: Starting in permissive mode
[ 0.013612] Yama: becoming mindful.
[ 0.014142] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015804] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016552] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016562] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016772] Initializing cgroup subsys blkio
[ 0.016775] Initializing cgroup subsys memory
[ 0.016781] Initializing cgroup subsys devices
[ 0.016783] Initializing cgroup subsys freezer
[ 0.016785] Initializing cgroup subsys net_cls
[ 0.016787] Initializing cgroup subsys perf_event
[ 0.016788] Initializing cgroup subsys net_prio
[ 0.016790] Initializing cgroup subsys hugetlb
[ 0.016812] CPU: Physical Processor ID: 0
[ 0.016813] CPU: Processor Core ID: 0
[ 0.016817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016818] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.017782] mce: CPU supports 7 MCE banks
[ 0.017793] CPU0: Thermal monitoring enabled (TM1)
[ 0.017801] process: using mwait in idle threads
[ 0.017804] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.017805] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.018123] Freeing SMP alternatives memory: 28K (ffffffff81eb8000 - ffffffff81ebf000)
[ 0.019214] ftrace: allocating 28732 entries in 113 pages
[ 0.030415] DMAR: Host address width 39
[ 0.030417] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.030423] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.030425] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.030428] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.030429] DMAR: RMRR base: 0x0000008be1e000 end: 0x0000008be3dfff
[ 0.030430] DMAR: RMRR base: 0x0000008e000000 end: 0x000000ae7fffff
[ 0.030432] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.030433] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.030434] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.030435] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.030857] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.030858] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041472] TSC deadline timer enabled
[ 0.041474] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (fam: 06, model: 3d, stepping: 04)
[ 0.041492] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[ 0.041510] ... version: 3
[ 0.041511] ... bit width: 48
[ 0.041512] ... generic registers: 4
[ 0.041512] ... value mask: 0000ffffffffffff
[ 0.041513] ... max period: 0000ffffffffffff
[ 0.041514] ... fixed-purpose events: 3
[ 0.041515] ... event mask: 000000070000000f
[ 0.042184] x86: Booting SMP configuration:
[ 0.042186] .... node #0, CPUs: #1
[ 0.046505] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.046578] #2
[ 0.048370] microcode: CPU2 microcode updated early to revision 0x18, date = 2014-12-05
[ 0.051486] #3
[ 0.055722] x86: Booted up 1 node, 4 CPUs
[ 0.055724] smpboot: Total of 4 processors activated (20750.54 BogoMIPS)
[ 0.059925] devtmpfs: initialized
[ 0.061742] PM: Registering ACPI NVS region [mem 0x8be7f000-0x8bf7efff] (1048576 bytes)
[ 0.061814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.061890] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.061892] pinctrl core: initialized pinctrl subsystem
[ 0.061931] RTC time: 11:06:25, date: 11/18/15
[ 0.062033] NET: Registered protocol family 16
[ 0.064727] cpuidle: using governor menu
[ 0.064798] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.064799] ACPI: bus type PCI registered
[ 0.064801] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.064864] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064866] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.064876] PCI: Using configuration type 1 for base access
[ 0.065087] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.065087] mtrr: probably your BIOS does not setup all CPUs.
[ 0.065088] mtrr: corrected configuration.
[ 0.067999] ACPI: Added _OSI(Module Device)
[ 0.068001] ACPI: Added _OSI(Processor Device)
[ 0.068002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.068003] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.077138] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.079626] ACPI: Dynamic OEM Table Load:
[ 0.079634] ACPI: SSDT 0xFFFF880245901000 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927)
[ 0.080269] ACPI: Dynamic OEM Table Load:
[ 0.080276] ACPI: SSDT 0xFFFF880245893000 0005DB (v02 PmRef ApIst 00003000 INTL 20130927)
[ 0.080948] ACPI: Dynamic OEM Table Load:
[ 0.080953] ACPI: SSDT 0xFFFF8802459A0800 000119 (v02 PmRef ApCst 00003000 INTL 20130927)
[ 0.081949] ACPI : EC: EC started
[ 3.085949] ACPI: Interpreter enabled
[ 3.085957] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 3.085962] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 3.085976] ACPI: (supports S0 S3 S4 S5)
[ 3.085977] ACPI: Using IOAPIC for interrupt routing
[ 3.085998] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.087101] ACPI: Power Resource [APPR] (off)
[ 3.088906] ACPI: Power Resource [COMP] (on)
[ 3.089056] ACPI: Power Resource [LPP] (on)
[ 3.089575] ACPI: Power Resource [PXP2] (on)
[ 3.194808] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 3.194814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.196120] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 3.196122] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 3.196506] PCI host bridge to bus 0000:00
[ 3.196508] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 3.196510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 3.196511] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 3.196513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 3.196514] pci_bus 0000:00: root bus resource [mem 0xae800000-0xdfffffff window]
[ 3.196515] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 3.196517] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[ 3.196518] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 3.196524] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 3.196619] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 3.196632] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[ 3.196637] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 3.196642] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 3.196738] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 3.196749] pci 0000:00:03.0: reg 0x10: [mem 0xc1330000-0xc1333fff 64bit]
[ 3.196855] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 3.196875] pci 0000:00:14.0: reg 0x10: [mem 0xc1320000-0xc132ffff 64bit]
[ 3.196912] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.196962] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 3.196993] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 3.197018] pci 0000:00:16.0: reg 0x10: [mem 0xc133b000-0xc133b01f 64bit]
[ 3.197072] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 3.197151] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 3.197171] pci 0000:00:19.0: reg 0x10: [mem 0xc1300000-0xc131ffff]
[ 3.197178] pci 0000:00:19.0: reg 0x14: [mem 0xc133d000-0xc133dfff]
[ 3.197184] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
[ 3.197226] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 3.197274] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 3.197303] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 3.197324] pci 0000:00:1b.0: reg 0x10: [mem 0xc1334000-0xc1337fff 64bit]
[ 3.197368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 3.197447] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 3.197502] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.197605] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400
[ 3.197663] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 3.197762] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 3.197819] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 3.197891] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 3.197925] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 3.197951] pci 0000:00:1d.0: reg 0x10: [mem 0xc1339000-0xc13393ff]
[ 3.198018] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.198069] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3.198100] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 3.198274] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 3.198292] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
[ 3.198298] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
[ 3.198304] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
[ 3.198310] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
[ 3.198315] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 3.198321] pci 0000:00:1f.2: reg 0x24: [mem 0xc1338000-0xc13387ff]
[ 3.198345] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.198421] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 3.198434] pci 0000:00:1f.3: reg 0x10: [mem 0xc133a000-0xc133a0ff 64bit]
[ 3.198451] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 3.198568] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.198573] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff]
[ 3.198621] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 3.198654] pci 0000:02:00.0: reg 0x10: [mem 0xc1100000-0xc1100fff]
[ 3.198760] pci 0000:02:00.0: supports D1 D2
[ 3.198761] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 3.202412] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 3.202415] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 3.202417] pci 0000:00:1c.1: bridge window [mem 0xc1100000-0xc11fffff]
[ 3.202621] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
[ 3.202728] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[ 3.203023] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 3.203101] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 3.204560] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 3.204564] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 3.205484] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.205519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.205552] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.205584] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.205616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.205648] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 3.205681] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 3.205713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 3.206005] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 3.206044] ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 3.206128] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 3.206130] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.206132] vgaarb: loaded
[ 3.206133] vgaarb: bridge control possible 0000:00:02.0
[ 3.206214] SCSI subsystem initialized
[ 3.206252] libata version 3.00 loaded.
[ 3.206277] ACPI: bus type USB registered
[ 3.206290] usbcore: registered new interface driver usbfs
[ 3.206297] usbcore: registered new interface driver hub
[ 3.206313] usbcore: registered new device driver usb
[ 3.206400] PCI: Using ACPI for IRQ routing
[ 3.211364] PCI: pci_cache_line_size set to 64 bytes
[ 3.211683] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 3.211684] e820: reserve RAM buffer [mem 0x8ab7f000-0x8bffffff]
[ 3.211685] e820: reserve RAM buffer [mem 0x24f800000-0x24fffffff]
[ 3.211782] NetLabel: Initializing
[ 3.211783] NetLabel: domain hash size = 128
[ 3.211783] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.211793] NetLabel: unlabeled traffic allowed by default
[ 3.211841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 3.211845] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 3.213869] clocksource: Switched to clocksource hpet
[ 3.219526] pnp: PnP ACPI init
[ 3.219711] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.219713] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 3.219715] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.219716] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.219718] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
[ 3.219719] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 3.219721] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.219722] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 3.219723] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.219725] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 3.219726] system 00:00: [mem 0xae810000-0xae81ffff] has been reserved
[ 3.219728] system 00:00: [mem 0xae800000-0xae80ffff] has been reserved
[ 3.219731] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.219865] system 00:01: [io 0x0200-0x020f] has been reserved
[ 3.219866] system 00:01: [io 0x0220-0x027f] has been reserved
[ 3.219868] system 00:01: [io 0xffff] has been reserved
[ 3.219875] system 00:01: [io 0xffff] has been reserved
[ 3.219876] system 00:01: [io 0xffff] has been reserved
[ 3.219878] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 3.219879] system 00:01: [io 0xef80-0xef9f] has been reserved
[ 3.219882] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.219918] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.220062] pnp 00:03: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
[ 3.220079] pnp 00:04: Plug and Play ACPI device, IDs SYN3015 SYN0100 SYN0002 PNP0f13 (active)
[ 3.220460] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 3.220490] pnp: PnP ACPI: found 6 devices
[ 3.226427] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.226446] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 3.226455] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.226457] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3.226463] pci 0000:00:1c.1: BAR 15: assigned [mem 0xae900000-0xaeafffff 64bit pref]
[ 3.226465] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.226469] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff]
[ 3.226475] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 3.226477] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 3.226480] pci 0000:00:1c.1: bridge window [mem 0xc1100000-0xc11fffff]
[ 3.226483] pci 0000:00:1c.1: bridge window [mem 0xae900000-0xaeafffff 64bit pref]
[ 3.226487] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 3.226491] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff]
[ 3.226497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.226499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 3.226500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.226502] pci_bus 0000:00: resource 7 [mem 0xae800000-0xdfffffff window]
[ 3.226503] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[ 3.226504] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[ 3.226505] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[ 3.226507] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc12fffff]
[ 3.226508] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 3.226510] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff]
[ 3.226511] pci_bus 0000:02: resource 2 [mem 0xae900000-0xaeafffff 64bit pref]
[ 3.226512] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff]
[ 3.226549] NET: Registered protocol family 2
[ 3.226732] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 3.226882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.227058] TCP: Hash tables configured (established 65536 bind 65536)
[ 3.227085] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.227114] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 3.227182] NET: Registered protocol family 1
[ 3.227193] pci 0000:00:02.0: Video device with shadowed ROM
[ 3.227199] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 3.227676] PCI: CLS 64 bytes, default 64
[ 3.227720] Unpacking initramfs...
[ 3.503456] Freeing initrd memory: 19616K (ffff8800359a1000 - ffff880036cc9000)
[ 3.503485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.503487] software IO TLB [mem 0x86b7f000-0x8ab7f000] (64MB) mapped at [ffff880086b7f000-ffff88008ab7efff]
[ 3.503554] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 3.503555] hw unit of domain pp0-core 2^-14 Joules
[ 3.503556] hw unit of domain package 2^-14 Joules
[ 3.503557] hw unit of domain dram 2^-14 Joules
[ 3.503557] hw unit of domain pp1-gpu 2^-14 Joules
[ 3.503590] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than reserved [mem 0xfed10000-0xfed13fff]
[ 3.503591] ------------[ cut here ]------------
[ 3.503595] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2c5/0x380()
[ 3.503596] Info: mapping multiple BARs. Your kernel is fine.
[ 3.503597] Modules linked in:
[ 3.503600] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.2.5-300.fc23.x86_64 #1
[ 3.503601] Hardware name: Hewlett-Packard HP EliteBook 840 G2/2216, BIOS M71 Ver. 01.04 02/24/2015
[ 3.503602] 0000000000000000 0000000080950b0e ffff88024620ba78 ffffffff8177280a
[ 3.503604] 0000000000000000 ffff88024620bad0 ffff88024620bab8 ffffffff8109e4b6
[ 3.503606] ffff88024620bae8 00000000fed10000 ffffc90000c90000 0000000000006000
[ 3.503608] Call Trace:
[ 3.503612] [<ffffffff8177280a>] dump_stack+0x45/0x57
[ 3.503615] [<ffffffff8109e4b6>] warn_slowpath_common+0x86/0xc0
[ 3.503617] [<ffffffff8109e545>] warn_slowpath_fmt+0x55/0x70
[ 3.503619] [<ffffffff81065b95>] __ioremap_caller+0x2c5/0x380
[ 3.503621] [<ffffffff81065c67>] ioremap_nocache+0x17/0x20
[ 3.503624] [<ffffffff81039c89>] snb_uncore_imc_init_box+0x79/0xb0
[ 3.503627] [<ffffffff81038434>] uncore_pci_probe+0xd4/0x1a0
[ 3.503629] [<ffffffff813e61a5>] local_pci_probe+0x45/0xa0
[ 3.503632] [<ffffffff8129a67d>] ? sysfs_do_create_link_sd.isra.2+0x6d/0xb0
[ 3.503635] [<ffffffff813e739d>] pci_device_probe+0xed/0x140
[ 3.503638] [<ffffffff814d07f4>] driver_probe_device+0x1f4/0x450
[ 3.503640] [<ffffffff814d0ae0>] __driver_attach+0x90/0xa0
[ 3.503642] [<ffffffff814d0a50>] ? driver_probe_device+0x450/0x450
[ 3.503644] [<ffffffff814ce2bc>] bus_for_each_dev+0x6c/0xc0
[ 3.503646] [<ffffffff814cfffe>] driver_attach+0x1e/0x20
[ 3.503648] [<ffffffff814cfb4b>] bus_add_driver+0x1eb/0x280
[ 3.503650] [<ffffffff81d65149>] ? uncore_cpu_setup+0x12/0x12
[ 3.503652] [<ffffffff814d1350>] driver_register+0x60/0xe0
[ 3.503655] [<ffffffff813e5a8c>] __pci_register_driver+0x4c/0x50
[ 3.503657] [<ffffffff81d6521b>] intel_uncore_init+0xd2/0x2be
[ 3.503658] [<ffffffff81d65149>] ? uncore_cpu_setup+0x12/0x12
[ 3.503661] [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 3.503663] [<ffffffff810bbee1>] ? parse_args+0x271/0x4a0
[ 3.503666] [<ffffffff81778c00>] ? ldsem_down_write+0x170/0x199
[ 3.503668] [<ffffffff81d571dc>] kernel_init_freeable+0x18e/0x228
[ 3.503670] [<ffffffff81768f50>] ? rest_init+0x80/0x80
[ 3.503672] [<ffffffff81768f5e>] kernel_init+0xe/0xe0
[ 3.503674] [<ffffffff817795df>] ret_from_fork+0x3f/0x70
[ 3.503675] [<ffffffff81768f50>] ? rest_init+0x80/0x80
[ 3.503679] ---[ end trace c7a2cd2de371f920 ]---
[ 3.503743] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x18
[ 3.503748] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x18
[ 3.503754] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x18
[ 3.503760] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x18
[ 3.503800] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.504337] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 3.504360] Initialise system trusted keyring
[ 3.504383] audit: initializing netlink subsys (disabled)
[ 3.504395] audit: type=2000 audit(1447844787.477:1): initialized
[ 3.504706] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.505980] zpool: loaded
[ 3.505983] zbud: loaded
[ 3.506152] VFS: Disk quotas dquot_6.6.0
[ 3.506182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.506527] Key type big_key registered
[ 3.506531] SELinux: Registering netfilter hooks
[ 3.510375] NET: Registered protocol family 38
[ 3.510389] Key type asymmetric registered
[ 3.510393] Asymmetric key parser 'x509' registered
[ 3.510409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.510441] io scheduler noop registered
[ 3.510443] io scheduler deadline registered
[ 3.510477] io scheduler cfq registered (default)
[ 3.511001] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 3.511005] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 3.511019] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 3.511020] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 3.511023] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 3.511038] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 3.511039] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 3.511042] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 3.511047] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.511062] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 3.511084] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 3.511087] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.511115] intel_idle: MWAIT substates: 0x11142120
[ 3.511116] intel_idle: v0.4 model 0x3D
[ 3.511117] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.511404] ACPI: AC Adapter [AC] (on-line)
[ 3.511458] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 3.511461] ACPI: Sleep Button [SLPB]
[ 3.511490] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 3.511508] ACPI: Lid Switch [LID]
[ 3.511537] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.511539] ACPI: Power Button [PWRF]
[ 3.535684] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.535686] ACPI: Thermal Zone [CPUZ] (49 C)
[ 3.560166] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.560169] ACPI: Thermal Zone [GFXZ] (0 C)
[ 3.575430] thermal LNXTHERM:02: registered as thermal_zone2
[ 3.575432] ACPI: Thermal Zone [EXTZ] (37 C)
[ 3.590726] thermal LNXTHERM:03: registered as thermal_zone3
[ 3.590729] ACPI: Thermal Zone [LOCZ] (41 C)
[ 3.606049] thermal LNXTHERM:04: registered as thermal_zone4
[ 3.606052] ACPI: Thermal Zone [BATZ] (31 C)
[ 3.606305] thermal LNXTHERM:05: registered as thermal_zone5
[ 3.606306] ACPI: Thermal Zone [PCHZ] (84 C)
[ 3.606358] GHES: HEST is not enabled!
[ 3.606480] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.608231] Non-volatile memory driver v1.3
[ 3.608257] Linux agpgart interface v0.103
[ 3.608602] ahci 0000:00:1f.2: version 3.0
[ 3.619184] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x2 impl SATA mode
[ 3.619188] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 3.619575] scsi host0: ahci
[ 3.619817] scsi host1: ahci
[ 3.619861] ata1: DUMMY
[ 3.619863] ata2: SATA max UDMA/133 abar m2048@0xc1338000 port 0xc1338180 irq 45
[ 3.619941] libphy: Fixed MDIO Bus: probed
[ 3.620141] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.620194] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.620267] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 3.620272] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.620336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.620337] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.620339] usb usb1: Product: xHCI Host Controller
[ 3.620340] usb usb1: Manufacturer: Linux 4.2.5-300.fc23.x86_64 xhci-hcd
[ 3.620341] usb usb1: SerialNumber: 0000:00:14.0
[ 3.620508] hub 1-0:1.0: USB hub found
[ 3.620520] hub 1-0:1.0: 11 ports detected
[ 3.621457] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.621513] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.621536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.621538] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.621539] usb usb2: Product: xHCI Host Controller
[ 3.621540] usb usb2: Manufacturer: Linux 4.2.5-300.fc23.x86_64 xhci-hcd
[ 3.621541] usb usb2: SerialNumber: 0000:00:14.0
[ 3.621639] hub 2-0:1.0: USB hub found
[ 3.621645] hub 2-0:1.0: 4 ports detected
[ 3.621930] usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
[ 3.621932] usb usb2-port3: failed to peer to usb1-port1 (-16)
[ 3.621932] usb: port power management may be unreliable
[ 3.622021] usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1)
[ 3.622022] usb usb2-port4: failed to peer to usb1-port1 (-16)
[ 3.622074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.622079] ehci-pci: EHCI PCI platform driver
[ 3.622187] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.622243] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 3.622258] ehci-pci 0000:00:1d.0: debug port 2
[ 3.625576] ACPI: Battery Slot [BAT0] (battery present)
[ 3.625653] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.626163] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.626174] ehci-pci 0000:00:1d.0: irq 17, io mem 0xc1339000
[ 3.632148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.632175] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.632177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.632178] usb usb3: Product: EHCI Host Controller
[ 3.632179] usb usb3: Manufacturer: Linux 4.2.5-300.fc23.x86_64 ehci_hcd
[ 3.632180] usb usb3: SerialNumber: 0000:00:1d.0
[ 3.632324] hub 3-0:1.0: USB hub found
[ 3.632330] hub 3-0:1.0: 3 ports detected
[ 3.632452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.632458] ohci-pci: OHCI PCI platform driver
[ 3.632467] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.632506] usbcore: registered new interface driver usbserial
[ 3.632512] usbcore: registered new interface driver usbserial_generic
[ 3.632516] usbserial: USB Serial support registered for generic
[ 3.632546] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.633736] i8042: Detected active multiplexing controller, rev 1.1
[ 3.634382] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.634385] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.634411] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.634431] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.634452] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.634554] mousedev: PS/2 mouse device common for all mice
[ 3.634744] rtc_cmos 00:02: RTC can wake from S4
[ 3.634863] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.634888] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.634950] device-mapper: uevent: version 1.0.3
[ 3.635001] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[ 3.635047] Intel P-state driver initializing.
[ 3.635743] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.635840] usbcore: registered new interface driver usbhid
[ 3.635842] usbhid: USB HID core driver
[ 3.636020] drop_monitor: Initializing network drop monitor service
[ 3.636230] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.636356] Initializing XFRM netlink socket
[ 3.636644] NET: Registered protocol family 10
[ 3.637064] mip6: Mobile IPv6
[ 3.637070] NET: Registered protocol family 17
[ 3.637589] AVX2 version of gcm_enc/dec engaged.
[ 3.637592] AES CTR mode by8 optimization enabled
[ 3.660018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.664533] Loading compiled-in X.509 certificates
[ 3.665244] Loaded X.509 cert 'Fedora kernel signing key: 5fbc04322b1e3b0d16554b25ec578d20f98bfd47'
[ 3.665260] registered taskstats version 1
[ 3.665277] zswap: loading zswap
[ 3.665281] zswap: using zbud pool
[ 3.665295] zswap: using lzo compressor
[ 3.665932] Magic number: 7:613:125
[ 3.665995] acpi device:00: hash matches
[ 3.666050] rtc_cmos 00:02: setting system clock to 2015-11-18 11:06:28 UTC (1447844788)
[ 3.666108] PM: Hibernation image not present or could not be loaded.
[ 3.923384] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.925364] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.929783] ata2.00: ATA-9: MTFDDAK512MAY-1AE1ZABHA, M506, max UDMA/133
[ 3.929787] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.934375] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.934807] usb 2-1: New USB device found, idVendor=0424, idProduct=5534
[ 3.934810] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 3.934811] usb 2-1: Product: USB5534B
[ 3.934813] usb 2-1: Manufacturer: SMSC
[ 3.936178] hub 2-1:1.0: USB hub found
[ 3.936265] hub 2-1:1.0: 4 ports detected
[ 3.942751] ata2.00: configured for UDMA/133
[ 3.942943] scsi 1:0:0:0: Direct-Access ATA MTFDDAK512MAY-1A M506 PQ: 0 ANSI: 5
[ 3.943229] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 3.943232] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 3.943235] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.943303] sd 1:0:0:0: [sda] Write Protect is off
[ 3.943305] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.943396] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.943671] sda: sda1 sda2
[ 3.943893] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.944119] Freeing unused kernel memory: 1512K (ffffffff81d3e000 - ffffffff81eb8000)
[ 3.944120] Write protecting the kernel read-only data: 12288k
[ 3.944291] Freeing unused kernel memory: 508K (ffff880001781000 - ffff880001800000)
[ 3.944435] Freeing unused kernel memory: 760K (ffff880001b42000 - ffff880001c00000)
[ 3.946639] random: systemd urandom read with 27 bits of entropy available
[ 3.947515] systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.947616] systemd[1]: Detected architecture x86-64.
[ 3.947618] systemd[1]: Running in initial RAM disk.
[ 3.947630] systemd[1]: Set hostname to <teraclope>.
[ 3.974363] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.974678] systemd[1]: Reached target Local File Systems.
[ 3.974685] systemd[1]: Starting Local File Systems.
[ 3.974692] systemd[1]: Reached target Swap.
[ 3.974695] systemd[1]: Starting Swap.
[ 3.974848] systemd[1]: Created slice -.slice.
[ 3.974853] systemd[1]: Starting -.slice.
[ 3.974875] systemd[1]: Listening on udev Control Socket.
[ 3.974879] systemd[1]: Starting udev Control Socket.
[ 3.974897] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.974901] systemd[1]: Starting Journal Socket (/dev/log).
[ 3.974940] systemd[1]: Created slice System Slice.
[ 3.974945] systemd[1]: Starting System Slice.
[ 3.974960] systemd[1]: Listening on udev Kernel Socket.
[ 3.974964] systemd[1]: Starting udev Kernel Socket.
[ 3.974971] systemd[1]: Reached target Slices.
[ 3.974974] systemd[1]: Starting Slices.
[ 3.975020] systemd[1]: Listening on Journal Audit Socket.
[ 3.975025] systemd[1]: Starting Journal Audit Socket.
[ 3.975047] systemd[1]: Listening on Journal Socket.
[ 3.975051] systemd[1]: Starting Journal Socket.
[ 3.975101] systemd[1]: Started Load Kernel Modules.
[ 3.975355] systemd[1]: Starting Apply Kernel Variables...
[ 3.975367] systemd[1]: Reached target Sockets.
[ 3.975376] systemd[1]: Starting Sockets.
[ 3.975606] systemd[1]: Starting Journal Service...
[ 3.975965] systemd[1]: Starting Setup Virtual Console...
[ 3.976000] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 3.976434] systemd[1]: Starting dracut cmdline hook...
[ 3.976849] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.976866] systemd[1]: Reached target Timers.
[ 3.976882] systemd[1]: Starting Timers.
[ 3.977222] systemd[1]: Started Apply Kernel Variables.
[ 3.977266] audit: type=1130 audit(1447844788.809:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.980459] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.980487] audit: type=1130 audit(1447844788.813:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.980962] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.983906] systemd[1]: Started Create Static Device Nodes in /dev.
[ 3.983952] audit: type=1130 audit(1447844788.816:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.998805] systemd[1]: Started Journal Service.
[ 3.998859] audit: type=1130 audit(1447844788.831:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.022058] audit: type=1130 audit(1447844788.854:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.038404] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
[ 4.047806] audit: type=1130 audit(1447844788.880:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.048853] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[ 4.048856] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.049010] hub 3-1:1.0: USB hub found
[ 4.049098] hub 3-1:1.0: 8 ports detected
[ 4.050653] usb 2-3: New USB device found, idVendor=0424, idProduct=5534
[ 4.050656] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 4.050658] usb 2-3: Product: USB5534B
[ 4.050660] usb 2-3: Manufacturer: SMSC
[ 4.051837] hub 2-3:1.0: USB hub found
[ 4.051877] hub 2-3:1.0: 4 ports detected
[ 4.052054] usb: failed to peer 2-3-port1 and usb1-port1 by location (2-3-port1:none) (usb1-port1:usb2-port1)
[ 4.052057] usb 2-3-port1: failed to peer to usb1-port1 (-16)
[ 4.052241] usb: failed to peer 2-3-port3 and usb1-port2 by location (2-3-port3:none) (usb1-port2:usb2-port2)
[ 4.052243] usb 2-3-port3: failed to peer to usb1-port2 (-16)
[ 4.066630] audit: type=1130 audit(1447844788.899:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.070134] audit: type=1130 audit(1447844788.902:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.107739] audit: type=1130 audit(1447844788.940:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.127043] pps_core: LinuxPPS API ver. 1 registered
[ 4.127046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.129301] PTP clock support registered
[ 4.136770] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 47
[ 4.137188] compat: module verification failed: signature and/or required key missing - tainting kernel
[ 4.137264] Loading modules backported from Linux version v4.2.6-0-g1c02865
[ 4.137265] Backport generated by backports.git v4.2.6-1-0-g90118c7
[ 4.138744] usb 1-1: New USB device found, idVendor=0424, idProduct=2134
[ 4.138748] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.138750] usb 1-1: Product: USB2134B
[ 4.138751] usb 1-1: Manufacturer: SMSC
[ 4.139069] hub 1-1:1.0: USB hub found
[ 4.139123] hub 1-1:1.0: 4 ports detected
[ 4.143513] [drm] Initialized drm 1.1.0 20060810
[ 4.146843] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[ 4.146853] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.147309] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.151343] Intel(R) Wireless WiFi driver for Linux
[ 4.151345] Copyright(c) 2003- 2015 Intel Corporation
[ 4.152731] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-15.ucode failed with error -2
[ 4.152746] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-14.ucode failed with error -2
[ 4.152758] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-13.ucode failed with error -2
[ 4.152770] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-12.ucode failed with error -2
[ 4.152772] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-12.ucode' failed.
[ 4.152840] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-11.ucode failed with error -2
[ 4.152843] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-11.ucode' failed.
[ 4.152909] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265-10.ucode failed with error -2
[ 4.152911] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-7265-10.ucode' failed.
[ 4.152963] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 4.293592] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 4.309473] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.309476] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 48:0f:cf:27:60:3f
[ 4.309477] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.309500] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.310092] [drm] Memory usable by graphics device = 4096M
[ 4.310095] [drm] Replacing VGA console driver
[ 4.310164] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 4.310695] Console: switching to colour dummy device 80x25
[ 4.311068] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 4.317239] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.317242] [drm] Driver supports precise vblank timestamp query.
[ 4.317353] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.343887] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.345991] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 4.346056] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 4.348925] fbcon: inteldrmfb (fb0) is primary device
[ 4.458230] usb 1-3: New USB device found, idVendor=0424, idProduct=2134
[ 4.458240] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.458241] usb 1-3: Product: USB2134B
[ 4.458242] usb 1-3: Manufacturer: SMSC
[ 4.458696] hub 1-3:1.0: USB hub found
[ 4.458757] hub 1-3:1.0: 4 ports detected
[ 4.459269] usb: failed to peer 1-3-port1 and usb2-port1 by location (1-3-port1:none) (usb2-port1:usb1-port1)
[ 4.459270] usb 1-3-port1: failed to peer to usb2-port1 (-16)
[ 4.459413] usb: failed to peer 1-3-port3 and usb2-port2 by location (1-3-port3:none) (usb2-port2:usb1-port2)
[ 4.459414] usb 1-3-port3: failed to peer to usb2-port2 (-16)
[ 4.503700] tsc: Refined TSC clocksource calibration: 2593.994 MHz
[ 4.503702] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
[ 4.573787] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
[ 4.613778] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 4.780466] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.780467] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.851937] usb 1-3.4: new full-speed USB device number 5 using xhci_hcd
[ 4.939808] usb 1-3.4: New USB device found, idVendor=046d, idProduct=c52b
[ 4.939809] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.939810] usb 1-3.4: Product: USB Receiver
[ 4.939811] usb 1-3.4: Manufacturer: Logitech
[ 5.089068] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[ 5.254524] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
[ 5.254525] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.254526] usb 1-5: SerialNumber: 00204a6c4480
[ 5.348671] psmouse serio3: synaptics: queried max coordinates: x [..5668], y [..4762]
[ 5.382356] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
[ 5.408278] usb 1-7: new high-speed USB device number 7 using xhci_hcd
[ 5.425463] Console: switching to colour frame buffer device 200x56
[ 5.429310] [drm:gen8_irq_handler [i915]] *ERROR* The master control interrupt lied (SDE)!
[ 5.430601] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.430602] i915 0000:00:02.0: registered panic notifier
[ 5.440599] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1658220
[ 5.477405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
[ 5.504463] clocksource: Switched to clocksource tsc
[ 5.583576] usb 1-7: New USB device found, idVendor=04f2, idProduct=b466
[ 5.583577] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.583578] usb 1-7: Product: HP HD Webcam
[ 5.583579] usb 1-7: Manufacturer: SunplusIT Inc
[ 5.591102] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4/input2
[ 5.704326] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input13
[ 5.704474] logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:14.0-3.4:1
[ 5.708352] input: Logitech K330 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input14
[ 5.708528] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:14.0-3.4:2
[ 10.703657] input: Logitech Dell WM514 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.2/0003:046D:C52B.0003/0003:046D:4029.0006/input/input15
[ 10.704263] logitech-hidpp-device 0003:046D:4029.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Dell WM514] on usb-0000:00:14.0-3.4:3
[ 10.818560] audit_printk_skb: 3 callbacks suppressed
[ 10.818564] audit: type=1130 audit(1447844795.647:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.828793] audit: type=1130 audit(1447844795.657:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.872482] SGI XFS with ACLs, security attributes, no debug enabled
[ 10.874641] XFS (dm-0): Mounting V4 Filesystem
[ 10.898488] XFS (dm-0): Ending clean mount
[ 10.939969] audit: type=1130 audit(1447844795.768:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.939986] audit: type=1131 audit(1447844795.768:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.065453] audit: type=1130 audit(1447844795.893:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.073521] audit: type=1130 audit(1447844795.901:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.073547] audit: type=1131 audit(1447844795.901:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.075259] audit: type=1131 audit(1447844795.903:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.075831] audit: type=1130 audit(1447844795.904:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.075848] audit: type=1131 audit(1447844795.904:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.104704] systemd-journald[185]: Received SIGTERM from PID 1 (systemd).
[ 11.157523] SELinux: 32768 avtab hash slots, 103272 rules.
[ 11.167332] SELinux: 32768 avtab hash slots, 103272 rules.
[ 11.184673] SELinux: 8 users, 14 roles, 4900 types, 306 bools, 1 sens, 1024 cats
[ 11.184676] SELinux: 92 classes, 103272 rules
[ 11.186753] SELinux: Completing initialization.
[ 11.186756] SELinux: Setting up existing superblocks.
[ 11.196135] systemd[1]: Successfully loaded SELinux policy in 60.860ms.
[ 11.220486] systemd[1]: Relabelled /dev and /run in 13.711ms.
[ 11.338195] random: nonblocking pool is initialized
[ 11.361522] systemd-journald[634]: Received request to flush runtime journal from PID 1
[ 11.368071] RPC: Registered named UNIX socket transport module.
[ 11.368074] RPC: Registered udp transport module.
[ 11.368075] RPC: Registered tcp transport module.
[ 11.368076] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.414332] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.504389] Initializing HPQ6001 module
[ 11.504452] input: HP Wireless hotkeys as /devices/virtual/input/input16
[ 11.504557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.537850] hp_accel: hardware type HPB64xx found
[ 11.551016] tpm_tis 00:05: 1.2 TPM (device-id 0x1A, rev-id 16)
[ 11.551058] wmi: Mapper loaded
[ 11.607918] Bluetooth: Core ver 2.20
[ 11.607934] NET: Registered protocol family 31
[ 11.607935] Bluetooth: HCI device and connection manager initialized
[ 11.607938] Bluetooth: HCI socket layer initialized
[ 11.607941] Bluetooth: L2CAP socket layer initialized
[ 11.607964] Bluetooth: SCO socket layer initialized
[ 11.608033] media: Linux media interface: v0.10
[ 11.611753] wl: module license 'MIXED/Proprietary' taints kernel.
[ 11.611756] Disabling lock debugging due to kernel taint
[ 11.627230] usbcore: registered new interface driver btusb
[ 11.630703] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 11.636821] Linux video capture interface: v2.00
[ 11.646748] Bluetooth: hci0: read Intel version: 370810011002270d00
[ 11.647902] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq
[ 11.657180] lis3lv02d: 8 bits 3DC sensor found
[ 11.663333] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.690376] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 11.690452] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 11.690522] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 11.692390] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3228: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.692394] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.692396] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.692398] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 11.692399] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 11.692401] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 11.692403] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 11.694675] XFS (sda1): Mounting V4 Filesystem
[ 11.695649] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b466)
[ 11.700801] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 11.700887] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 11.705076] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input22
[ 11.705205] usbcore: registered new interface driver uvcvideo
[ 11.705206] USB Video Class driver (1.1.1)
[ 11.707134] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
[ 11.749395] XFS (sda1): Ending clean mount
[ 11.754088] iTCO_vendor_support: vendor-support=0
[ 11.756405] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.756449] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 11.757381] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.760941] ppdev: user-space parallel port driver
[ 11.783572] Adding 7602172k swap on /dev/mapper/fedora_teraclope-swap. Priority:-1 extents:1 across:7602172k SSFS
[ 11.786405] input: HP WMI hotkeys as /devices/virtual/input/input23
[ 11.862969] XFS (dm-3): Mounting V4 Filesystem
[ 11.868144] intel_rapl: Found RAPL domain package
[ 11.868148] intel_rapl: Found RAPL domain core
[ 11.868150] intel_rapl: Found RAPL domain uncore
[ 11.868152] intel_rapl: Found RAPL domain dram
[ 11.870876] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 11.883553] XFS (dm-2): Mounting V4 Filesystem
[ 11.891154] XFS (dm-3): Ending clean mount
[ 11.907674] XFS (dm-2): Ending clean mount
[ 12.906957] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input24
[ 13.577695] cfg80211: World regulatory domain updated:
[ 13.577698] cfg80211: DFS Master region: unset
[ 13.577699] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.577701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.577702] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.577703] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.577705] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.577706] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.577707] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.577708] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.577710] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.805326] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.805330] Bluetooth: BNEP filters: protocol multicast
[ 13.805333] Bluetooth: BNEP socket layer initialized
[ 14.039476] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 14.071521] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.118104] Ebtables v2.0 registered
[ 14.132763] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 14.352062] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 14.550148] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 18.147068] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 18.147132] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 18.750591] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 23.469352] tun: Universal TUN/TAP device driver, 1.6
[ 23.469355] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 23.514738] device virbr0-nic entered promiscuous mode
[ 23.579555] Adjusting tsc more than 11% (7516154 vs 7179164)
[ 23.656346] virbr0: port 1(virbr0-nic) entered listening state
[ 23.656360] virbr0: port 1(virbr0-nic) entered listening state
[ 23.705143] virbr0: port 1(virbr0-nic) entered disabled state
[ 31.591367] fuse init (API version 7.23)
[ 31.765596] Bluetooth: RFCOMM TTY layer initialized
[ 31.765602] Bluetooth: RFCOMM socket layer initialized
[ 31.765723] Bluetooth: RFCOMM ver 1.11
[ 79.814091] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 79.814094] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 79.967819] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 79.967823] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 91.560473] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 91.560476] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 91.632641] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 91.632645] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 1961.889902] perf interrupt took too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
lspci >
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-LM (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 48)
J'ai bien essayé des choses, de regarder sur le net avant de vous embêter mais la je sèche.
Merci pour tout.