Bonjour,
Je me prend un peut le tête avec une imprimante (HP_Color_LaserJet_Pro_MFP_M176n). Lorsque les ordres d'impression sont lancés, je reçois un message comme quoi l'impression à été réussie puis un m'indiquant que l'impression est stoppé. Rien ne sort de l'imprimante.
L'imprimante est en réseau mais une connexion USB ne résout pas le problème.
Le scanner fonctionne correctement. Un ordre d'impression fait sortir l'imprimante de sa veille. Une impression de page de test depuis l'imprimante elle-même ne pose pas de problèmes.
[arthur@thebeast ~] $ hp-check -r
Saving output in log file: /home/arthur/hp-check.log
HP Linux Imaging and Printing System (ver. 3.15.7)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
---------------
| SYSTEM INFO |
---------------
Kernel: 4.1.3-200.fc22.x86_64 #1 SMP Wed Jul 22 19:51:58 UTC 2015 GNU/Linux
Host: thebeast
Proc: 4.1.3-200.fc22.x86_64 #1 SMP Wed Jul 22 19:51:58 UTC 2015 GNU/Linux
Distribution: fedora 22
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.15.7
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for fedora distro 22 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.15.7
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.15.7
html=/usr/share/doc/hplip-3.15.7
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.15.7
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.15.7
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/net/HP_Color_LaserJet_Pro_MFP_M176n?ip=192.168.1.182"
printer_name = HP_Color_LaserJet_Pro_MFP_M176n
working_dir = /home/arthur/T\xe9l\xe9\x63hargements/hplip-3.15.7.run
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = false
last_upgraded_time = 1433363612
pending_upgrade_time = 0
[installation]
date_time = 07/30/15 16:53:24
version = 3.15.7
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
dbus DBus - Message bus system REQUIRED - 1.8.18 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.113 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.0.3 OK 'CUPS Scheduler is running'
network network -wget OPTIONAL - 1.16.3 OK -
-------------------------
| General Dependencies |
-------------------------
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.0.3 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.1.8 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 2.7.10 OK -
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK -
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.11.3 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.10 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
libjpeg libjpeg - JPEG library REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.21' OK -
python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.11.3 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.0.3 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
---------------
| COMPILEDEP |
---------------
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 5.1.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.0 OK -
libtool libtool - Library building support services REQUIRED - 2.4.2 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.15.7 OK -
hpmudext IO-Extension REQUIRED - 3.15.7 OK -
-----------------------
| Scan Configuration |
-----------------------
scanext Scan-SANE-Extension REQUIRED - 3.15.7 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.15.7 OK 'hpaio found in /etc/sane.d/dll.conf'
-----------------------
| Other Dependencies |
-----------------------
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/net/HP_Color_LaserJet_Pro_MFP_M176n?ip=192.168.1.182' is a Hewlett-Packard HP_Color_LaserJet_Pro_MFP_M176n all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_Color_LaserJet_Pro_MFP_M176n
-------------------------------
Type: Printer
Device URI: hp:/net/HP_Color_LaserJet_Pro_MFP_M176n?ip=192.168.1.182
PPD: /etc/cups/ppd/HP_Color_LaserJet_Pro_MFP_M176n.ppd
PPD Description: HP Color LaserJet Pro MFP m176n, hpcups 3.15.7, requires proprietary plugin
Printer ready to printr HP_Color_LaserJet_Pro_MFP_M176n is idle. enabled since jeu. 30 juil. 2015 16:51:56 CEST
Required plug-in status: Installed
Communication status: Good
--------------
| PERMISSION |
--------------
-----------
| SELINUX |
-----------
SELinux disabled Optional - - OK -
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
error: 'PKG_FROM_PIP:notify2' package is missing/incompatible
Total Errors: 1
Total Warnings: 0
Run 'hp-doctor' command to prompt and fix the issues.
Done.
[arthur@thebeast ~] $ groups
arthur sys lp wheel
[arthur@thebeast ~] $ journalctl -u cups.service -e
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:12 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdAcceptClient(lis=0x562c566c5a00(3)) Clients=5
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] skipping getpeercon()
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Accepted from localhost (Domain)
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdAddSelect(fd=19, read_cb=0x562c56056c60, write_cb=(nil), data=0x562c568573f0)
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Waiting for request.
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] Closing connection.
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=22)
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:12 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] POST /admin/ HTTP/1.1
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Returning HTTP Forbidden for Pause-Printer (ipp://localhost/printers/HP_Color_LaserJet_Pro_MFP_M176n) from localhost
juil. 30 16:53:31 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:31 thebeast cupsd[1132]: select_timeout(0): 2 seconds to write dirty config/state files
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] Closing connection.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdRemoveSelect(fd=19)
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:33 thebeast cupsd[1132]: Saving job.cache...
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c56844440(66)): job->attrs=0x562c566d4500
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c568446b0(67)): job->attrs=0x562c56868910
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c568453b0(68)): job->attrs=0x562c5686c590
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c5684afc0(69)): job->attrs=0x562c5686d0a0
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: Saving subscriptions.conf...
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
juil. 30 16:53:33 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:34 thebeast cupsd[1132]: cupsdCheckJobs: 0 active jobs, sleeping=0, ac-power=-1, reload=0, curtime=1438268014
juil. 30 16:53:34 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:34 thebeast cupsd[1132]: select_timeout(0): 134 seconds to timeout a client connection
juil. 30 16:54:01 thebeast cupsd[1132]: cupsdCheckJobs: 0 active jobs, sleeping=0, ac-power=-1, reload=0, curtime=1438268041
juil. 30 16:54:01 thebeast cupsd[1132]: Report: clients=3
juil. 30 16:54:01 thebeast cupsd[1132]: Report: jobs=11
juil. 30 16:54:01 thebeast cupsd[1132]: Report: jobs-active=0
juil. 30 16:54:01 thebeast cupsd[1132]: Report: printers=2
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-string-count=18505
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-alloc-bytes=14392
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-total-bytes=345376
juil. 30 16:54:01 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:54:02 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:54:02 thebeast cupsd[1132]: select_timeout(0): 106 seconds to timeout a client connection
...skipping...
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:12 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdAcceptClient(lis=0x562c566c5a00(3)) Clients=5
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] skipping getpeercon()
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Accepted from localhost (Domain)
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdAddSelect(fd=19, read_cb=0x562c56056c60, write_cb=(nil), data=0x562c568573f0)
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Waiting for request.
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 76] Closing connection.
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=22)
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:12 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] POST /admin/ HTTP/1.1
juil. 30 16:53:12 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
juil. 30 16:53:12 thebeast cupsd[1132]: [Client 77] Returning HTTP Forbidden for Pause-Printer (ipp://localhost/printers/HP_Color_LaserJet_Pro_MFP_M176n) from localhost
juil. 30 16:53:31 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:31 thebeast cupsd[1132]: select_timeout(0): 2 seconds to write dirty config/state files
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] cupsdReadClient error=0, used=0, state=HTTP_STATE_WAITING, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=0, request=(nil)(), file=-1
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
juil. 30 16:53:33 thebeast cupsd[1132]: [Client 86] Closing connection.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdRemoveSelect(fd=19)
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdRemoveSelect(fd=-1)
juil. 30 16:53:33 thebeast cupsd[1132]: Saving job.cache...
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c56844440(66)): job->attrs=0x562c566d4500
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c568446b0(67)): job->attrs=0x562c56868910
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c568453b0(68)): job->attrs=0x562c5686c590
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSaveJob(job=0x562c5684afc0(69)): job->attrs=0x562c5686d0a0
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: Saving subscriptions.conf...
juil. 30 16:53:33 thebeast systemd[1]: Started CUPS Scheduler.
juil. 30 16:53:33 thebeast cupsd[1132]: cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
juil. 30 16:53:33 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:34 thebeast cupsd[1132]: cupsdCheckJobs: 0 active jobs, sleeping=0, ac-power=-1, reload=0, curtime=1438268014
juil. 30 16:53:34 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:53:34 thebeast cupsd[1132]: select_timeout(0): 134 seconds to timeout a client connection
juil. 30 16:54:01 thebeast cupsd[1132]: cupsdCheckJobs: 0 active jobs, sleeping=0, ac-power=-1, reload=0, curtime=1438268041
juil. 30 16:54:01 thebeast cupsd[1132]: Report: clients=3
juil. 30 16:54:01 thebeast cupsd[1132]: Report: jobs=11
juil. 30 16:54:01 thebeast cupsd[1132]: Report: jobs-active=0
juil. 30 16:54:01 thebeast cupsd[1132]: Report: printers=2
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-string-count=18505
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-alloc-bytes=14392
juil. 30 16:54:01 thebeast cupsd[1132]: Report: stringpool-total-bytes=345376
juil. 30 16:54:01 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:54:02 thebeast cupsd[1132]: select_timeout: JobHistoryUpdate=1438354382
juil. 30 16:54:02 thebeast cupsd[1132]: select_timeout(0): 106 seconds to timeout a client connection
...skipping...
/etc/cups/cupsd.conf
MaxLogSize 0
LogLevel debug2
PageLogFormat
Port 631
Listen /var/run/cups/cups.sock
Browsing On
BrowseLocalProtocols dnssd
DefaultAuthType Basic
WebInterface Yes
<Location />
Order allow,deny
Allow @LOCAL
</Location>
<Location /admin>
Order allow,deny
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
</Location>
<Policy default>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Policy authenticated>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
JobPrivateAccess default
JobPrivateValues default
SubscriptionPrivateAccess default
SubscriptionPrivateValues default