Ta pas des détails au niveau du bios pour voir si ça correspond?
blocage au démarrage sur la "page" de la carte mère
c'est à dire ?VINDICATORs wrote:Ta pas des détails au niveau du bios pour voir si ça correspond
merci
Bonjour,
J'ai regardé sur le site de Asus: il y a 13 versions de Bios pour cette carte. Si ta version est un peu ancienne, il y a une sacrée série de "stability fix".
Une petite mise à jour serait peut-être la bienvenue.
J'ai regardé sur le site de Asus: il y a 13 versions de Bios pour cette carte. Si ta version est un peu ancienne, il y a une sacrée série de "stability fix".
Une petite mise à jour serait peut-être la bienvenue.
Dans le bios tu n'a pas de menu où il affiche les tensions et autres informations?
Sur le mien ça me permet de faire correspondre certaines lignes de lm_sensors qui ne sont pas nommée comme il faut. Voir si c'est bogué ou non.
+1 pour CS
Sur le mien ça me permet de faire correspondre certaines lignes de lm_sensors qui ne sont pas nommée comme il faut. Voir si c'est bogué ou non.
+1 pour CS
Bonjour CS et merci de passer par là.CS wrote:Bonjour,
J'ai regardé sur le site de Asus: il y a 13 versions de Bios pour cette carte. Si ta version est un peu ancienne, il y a une sacrée série de "stability fix".
Une petite mise à jour serait peut-être la bienvenue.
J'ai vu ces mises à jour, effectivement. Pour le moment je ne touche à rien car cela fonctionne normalement. Je passe de Windows à Kubuntu à Fedora en ayant installé de nouveaux OS, consulter le BIOS et RAS. Depuis le grand nettoyage rien, pas une faute de boot, enfin si juste après mais depuis non, ça boot normalement.
Salut VINDICATORs,Dans le bios tu n'a pas de menu où il affiche les tensions et autres informations?
Voila ce que j'y trouve :
Je n'y ai jamais touché.
Sinon une suite de sensors, sous kubuntu cette fois. Il est moins précis, je ne sais pas pourquoi
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +0.86 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.15 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 2108 RPM (min = 600 RPM, max = 7200 RPM)
Chassis1 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +35.0°C (high = +45.0°C, crit = +45.5°C)
MB Temperature: +33.0°C (high = +45.0°C, crit = +46.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +37.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +35.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +37.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +39.0°C (high = +83.0°C, crit = +99.0°C) Je laisse ouvert histoire de suivre l' évolution de la situation et de vous tenir au courant. De plus sait-on jamais, cela peut être utile à d'autres ...
Petit retour avec sensors cette sous fedora kde installée en solo sur l'ordi concerné. (nettoyage de windows :-P)
On voit que sous kde apparemment il manque une partie (w83667hg-isa-0290 Adapter: ISA adapter)
On voit que sous kde apparemment il manque une partie (w83667hg-isa-0290 Adapter: ISA adapter)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +0.88 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.21 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 2108 RPM (min = 600 RPM, max = 7200 RPM)
Chassis1 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +36.0°C (high = +45.0°C, crit = +45.5°C)
MB Temperature: +32.0°C (high = +45.0°C, crit = +46.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +36.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +33.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +36.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +35.0°C (high = +83.0°C, crit = +99.0°C)
Le problème n'est pas kde, sous gnome tu aurais le même résultat.
sensors ne détecte pas tous les paramètres de toutes les cartes mère, il y en trop je pense. :hammer:
sensors ne détecte pas tous les paramètres de toutes les cartes mère, il y en trop je pense. :hammer:
- Modifié
Salut chepioq,Le problème n'est pas kde, sous gnome tu aurais le même résultat.
Sans doute, mais vois au post #16 - posté sous gnome
Edit :
Ha, jte le mets ici :
dapter: PCI adapter
fan1: 1320 RPM
temp1: +34.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +0.87 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.21 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 2108 RPM (min = 600 RPM, max = 7200 RPM)
Chassis1 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +35.0°C (high = +45.0°C, crit = +45.5°C)
MB Temperature: +32.0°C (high = +45.0°C, crit = +46.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +35.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +31.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +35.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +34.0°C (high = +83.0°C, crit = +99.0°C)
w83667hg-isa-0290
Adapter: ISA adapter
Vcore: +0.88 V (min = +0.00 V, max = +1.74 V)
in1: +1.74 V (min = +1.88 V, max = +2.04 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+3.3V: +3.31 V (min = +2.98 V, max = +3.63 V)
in4: +1.70 V (min = +1.78 V, max = +0.95 V) ALARM
in5: +2.04 V (min = +0.38 V, max = +0.47 V) ALARM
3VSB: +3.41 V (min = +2.98 V, max = +3.63 V)
Vbat: +3.38 V (min = +2.70 V, max = +3.63 V)
fan1: 0 RPM (min = 57 RPM, div = 128) ALARM
fan2: 2109 RPM (min = 1622 RPM, div = 16)
fan3: 0 RPM (min = 60 RPM, div = 128) ALARM
fan4: 0 RPM (min = 88 RPM, div = 128) ALARM
fan5: 0 RPM (min = 70 RPM, div = 128) ALARM
PECI Agent 1: +35.0°C (high = -35.0°C, hyst = +127.0°C) sensor = Intel PECI
PECI Agent 1: +35.0°C (high = +80.0°C, hyst = +75.0°C) sensor = Intel PECI
AUXTIN: +33.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
SYSTIN: +32.0°C
cpu0_vid: +1.194 V
intrusion0: OK
lm_sensors n'est ni un composant gnome, ni kde. Dans celui que tu avais posté précédemment, il y a un pilote sensors en plus w83667hg-isa-0290, qui à l'air de remonter pas mal d'info. Tu a répondu au même question avec la commande sensor-detect que la derniere fois ?
Salut madko,
oui, exactement comme d'habitude. Au moment ou j'avais encore une partition Kubuntu cela donnait le même résultat. voir le post #25. Même si comme tu le rappelle lm_sensors n'est pas un composant de ces bureaux et bien sur sauf erreur de ma part (pas impossible ça !) je note une différence ...
oui, exactement comme d'habitude. Au moment ou j'avais encore une partition Kubuntu cela donnait le même résultat. voir le post #25. Même si comme tu le rappelle lm_sensors n'est pas un composant de ces bureaux et bien sur sauf erreur de ma part (pas impossible ça !) je note une différence ...
T'as quoi dans /etc/sysconfig/lm_sensors ?
# Generated by sensors-detect on Mon Mar 2 15:44:58 2015
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
HWMON_MODULES="coretemp"
Et si tu tapes:
modprobe w83627ehf- Modifié
tristan@FMaisonKDE ~]$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +0.87 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: +3.31 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.21 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 2108 RPM (min = 600 RPM, max = 7200 RPM)
Chassis1 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +35.0°C (high = +45.0°C, crit = +45.5°C)
MB Temperature: +33.0°C (high = +45.0°C, crit = +46.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +35.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +32.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +35.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +33.0°C (high = +83.0°C, crit = +99.0°C)
w83667hg-isa-0290
Adapter: ISA adapter
Vcore: +0.88 V (min = +0.00 V, max = +1.74 V)
in1: +1.74 V (min = +1.37 V, max = +1.91 V)
AVCC: +3.31 V (min = +0.83 V, max = +1.89 V) ALARM
+3.3V: +3.31 V (min = +1.01 V, max = +1.76 V) ALARM
in4: +1.70 V (min = +1.78 V, max = +0.95 V) ALARM
in5: +2.04 V (min = +0.38 V, max = +0.47 V) ALARM
3VSB: +3.41 V (min = +0.27 V, max = +0.34 V) ALARM
Vbat: +3.38 V (min = +3.90 V, max = +0.98 V) ALARM
fan1: 0 RPM (min = 42 RPM, div = 128) ALARM
fan2: 2109 RPM (min = 1622 RPM, div = 16)
fan3: 0 RPM (min = 60 RPM, div = 128) ALARM
fan4: 0 RPM (min = 88 RPM, div = 128) ALARM
fan5: 0 RPM (min = 70 RPM, div = 128) ALARM
PECI Agent 1: +35.0°C (high = -35.0°C, hyst = +127.0°C) sensor = Intel PECI
PECI Agent 1: +35.0°C (high = +80.0°C, hyst = +75.0°C) sensor = Intel PECI
AUXTIN: +34.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
SYSTIN: +33.0°C
cpu0_vid: +1.194 V
intrusion0: OK
Edit : HA !!! J'en ai même plus d'ALARM !!!!!!
- Modifié
Bon les alarms sur les fan tu peux ignorer. Par contre ya de sacrés écarts:
3.31V au lieu de quelque chose compris entre 1.01V et 1.76 c'est énorme....
Idem pour le 2.04V, 3.41V.
Du coup ça semble plus être un bug, les min max indiqué sont plutot étrange... Les valeurs remontées ont l'air correctes et en rapport avec le module atk0110. Donc si l'alarm est indiqué juste parce que la valeur n'est pas comprise dans un écart bugué...
A surveiller. Si le problème n'est pas reapparu c'est bien, même si on en sait pas plus.
3.31V au lieu de quelque chose compris entre 1.01V et 1.76 c'est énorme....
Idem pour le 2.04V, 3.41V.
Du coup ça semble plus être un bug, les min max indiqué sont plutot étrange... Les valeurs remontées ont l'air correctes et en rapport avec le module atk0110. Donc si l'alarm est indiqué juste parce que la valeur n'est pas comprise dans un écart bugué...
A surveiller. Si le problème n'est pas reapparu c'est bien, même si on en sait pas plus.
- Modifié
Franchement à mon humble avis c'est juste que ça correspond pas à la bonne sonde.
Rien de grave, avec l'ancienne interface ksensors je modifiais les noms en rapport. Par contre là je ne sais pas si c'est possible.
+3.3V: +3.31 V (min = +1.01 V, max = +1.76 V) ALARM
C'est quoi ce bogue d'écriture? parce que bon le +3.3V c'est pas compris entre 1.01V et 1.76 chez moi! Surtout qu'en plus la sonde correspond.
Rien de grave, avec l'ancienne interface ksensors je modifiais les noms en rapport. Par contre là je ne sais pas si c'est possible.
+3.3V: +3.31 V (min = +1.01 V, max = +1.76 V) ALARM
C'est quoi ce bogue d'écriture? parce que bon le +3.3V c'est pas compris entre 1.01V et 1.76 chez moi! Surtout qu'en plus la sonde correspond.
- Modifié
Merci à vous pour ces retours.
Franchement je me demande si cela ne demanderai pas une petite MAJ de la carte ?
Après il est vrai que le problème n'est pas réapparu.
Sonde ou pas je n'aime pas trop ce genre de "message" qui dit tout ou rien et dont on ne sait pas trop par quel bout le prendre...
sensors aujourd'hui
Franchement je me demande si cela ne demanderai pas une petite MAJ de la carte ?
Après il est vrai que le problème n'est pas réapparu.
Sonde ou pas je n'aime pas trop ce genre de "message" qui dit tout ou rien et dont on ne sait pas trop par quel bout le prendre...
sensors aujourd'hui
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +0.95 V (min = +0.80 V, max = +1.60 V)
+3.3V Voltage: +3.30 V (min = +2.97 V, max = +3.63 V)
+5V Voltage: +5.09 V (min = +4.50 V, max = +5.50 V)
+12V Voltage: +12.21 V (min = +10.20 V, max = +13.80 V)
CPU Fan Speed: 2056 RPM (min = 600 RPM, max = 7200 RPM)
Chassis1 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Chassis2 Fan Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
Power Fan Speed: 0 RPM (min = 0 RPM, max = 7200 RPM)
CPU Temperature: +42.5°C (high = +45.0°C, crit = +45.5°C)
MB Temperature: +31.0°C (high = +45.0°C, crit = +46.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +43.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +39.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +42.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +40.0°C (high = +83.0°C, crit = +99.0°C)
w83667hg-isa-0290
Adapter: ISA adapter
Vcore: +1.09 V (min = +0.00 V, max = +1.74 V)
in1: +1.74 V (min = +1.88 V, max = +2.04 V) ALARM
AVCC: +3.30 V (min = +0.86 V, max = +1.89 V) ALARM
+3.3V: +3.31 V (min = +1.01 V, max = +1.76 V) ALARM
in4: +1.69 V (min = +1.78 V, max = +0.95 V) ALARM
in5: +2.04 V (min = +0.38 V, max = +0.47 V) ALARM
3VSB: +3.41 V (min = +0.27 V, max = +1.87 V) ALARM
Vbat: +3.39 V (min = +3.90 V, max = +0.98 V) ALARM
fan1: 0 RPM (min = 57 RPM, div = 128) ALARM
fan2: 2057 RPM (min = 1622 RPM, div = 16)
fan3: 0 RPM (min = 60 RPM, div = 128) ALARM
fan4: 0 RPM (min = 88 RPM, div = 128) ALARM
fan5: 0 RPM (min = 70 RPM, div = 128) ALARM
PECI Agent 1: +43.0°C (high = -35.0°C, hyst = +127.0°C) sensor = Intel PECI
PECI Agent 1: +43.0°C (high = +80.0°C, hyst = +75.0°C) sensor = Intel PECI
AUXTIN: +37.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
SYSTIN: +31.0°C
cpu0_vid: +1.231 V
intrusion0: OKRegarde bien quand même, le 3VSB qui est à 0.47 max alors que c'est 3V, le +3.3V qui te dit que la norme c'est +1.76V... Non à mon avis c'est le bordel là dedans!
Ta même des min à +3.9V pour un max à 0.98...
Pour les mises à jours de la cm tu devrais avoir le descriptif de ce que corrige les versions. A toi de voir si ça en vaut la peine.
Ta même des min à +3.9V pour un max à 0.98...
Pour les mises à jours de la cm tu devrais avoir le descriptif de ce que corrige les versions. A toi de voir si ça en vaut la peine.
il y a du boulot alorsNon à mon avis c'est le bordel là dedans
- Modifié
dmesg me donne quelques warning dont :FAQ Sensors wrote: The ALARM indications in sensors are those reported by the sensor chip itself. They are NOT calculated by sensors. sensors simply reads the ALARM bits and reports them.
An ALARM will go off when a minimum or maximum limit is crossed. The ALARM is then latched - that is, it will stay there until the chip's registers are next accessed - which will be the next time you read these values, but not within (usually) 1.5 seconds since the last update.
Reading the registers clears the ALARMS, unless the current value is still out of range.
The purpose of this scheme is to tell you if there has been a problem and report it to the user. Voltage or temperature spikes get detected without having to read the sensor chip hundreds of times a second. The implemetation details depend a bit on the kind of chip. See the specific chip documentation in doc/chips/ and the chip datasheet for more information.
warning: mounting fs with errors, running e2fsck is recommendeddmesg :
[ 0.305031] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310784] ACPI: Dynamic OEM Table Load:
[ 0.310792] ACPI: SSDT 0xFFFF880213E68000 001238 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 0.311202] ACPI: Dynamic OEM Table Load:
[ 0.311206] ACPI: SSDT 0xFFFF880213C43000 0004D5 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 0.311778] ACPI: Interpreter enabled
[ 0.311787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.311798] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.311799] ACPI: Using IOAPIC for interrupt routing
[ 0.311815] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.312744] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.312872] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.318207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.318212] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.318356] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.318425] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.318428] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.318430] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.318431] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.318537] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.318682] PCI host bridge to bus 0000:00
[ 0.318684] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.318686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.318688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.318689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.318691] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.318692] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.318694] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[ 0.318702] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.318799] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.318849] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.318888] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.318924] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.319013] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.319102] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.319188] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.319268] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.319342] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.319440] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.319460] pci 0000:00:1a.0: reg 0x10: [mem 0xf3ffe000-0xf3ffe3ff]
[ 0.319544] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.319582] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.319619] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.319634] pci 0000:00:1b.0: reg 0x10: [mem 0xf3ff8000-0xf3ffbfff 64bit]
[ 0.319702] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.319768] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.319830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.319868] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.319903] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.319965] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.320003] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.320037] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.320098] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.320136] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.320170] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.320231] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.320269] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.320304] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.320371] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.320410] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.320444] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[ 0.320505] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.320543] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.320576] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[ 0.320642] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.320680] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.320714] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[ 0.320779] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.320818] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.320856] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.320875] pci 0000:00:1d.0: reg 0x10: [mem 0xf3ffd000-0xf3ffd3ff]
[ 0.320959] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.320997] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.321033] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.321107] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.321143] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.321300] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.321314] pci 0000:00:1f.2: reg 0x10: [io 0x9c00-0x9c07]
[ 0.321321] pci 0000:00:1f.2: reg 0x14: [io 0x9880-0x9883]
[ 0.321328] pci 0000:00:1f.2: reg 0x18: [io 0x9800-0x9807]
[ 0.321335] pci 0000:00:1f.2: reg 0x1c: [io 0x9480-0x9483]
[ 0.321341] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x940f]
[ 0.321350] pci 0000:00:1f.2: reg 0x24: [io 0x9080-0x908f]
[ 0.321438] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.321452] pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffc000-0xf3ffc0ff 64bit]
[ 0.321470] pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff]
[ 0.321544] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.321557] pci 0000:00:1f.5: reg 0x10: [io 0xac00-0xac07]
[ 0.321564] pci 0000:00:1f.5: reg 0x14: [io 0xa880-0xa883]
[ 0.321571] pci 0000:00:1f.5: reg 0x18: [io 0xa800-0xa807]
[ 0.321578] pci 0000:00:1f.5: reg 0x1c: [io 0xa480-0xa483]
[ 0.321584] pci 0000:00:1f.5: reg 0x20: [io 0xa400-0xa40f]
[ 0.321591] pci 0000:00:1f.5: reg 0x24: [io 0xa080-0xa08f]
[ 0.321721] pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
[ 0.321731] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
[ 0.321741] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.321750] pci 0000:01:00.0: reg 0x1c: [mem 0xe4000000-0xe7ffffff 64bit pref]
[ 0.321757] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f]
[ 0.321763] pci 0000:01:00.0: reg 0x30: [mem 0xf7b00000-0xf7b7ffff pref]
[ 0.321845] pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
[ 0.321855] pci 0000:01:00.1: reg 0x10: [mem 0xf7bfc000-0xf7bfffff]
[ 0.324375] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.324382] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.324387] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7bfffff]
[ 0.324394] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.324457] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.324509] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.324561] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.324611] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.324687] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.324716] pci 0000:05:00.0: reg 0x10: [mem 0xf7efe000-0xf7efffff 64bit]
[ 0.324862] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.327382] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.327391] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.327463] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.327544] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.327630] pci 0000:03:00.0: reg 0x24: [mem 0xf7dfe000-0xf7dfffff]
[ 0.327698] pci 0000:03:00.0: PME# supported from D3hot
[ 0.327758] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.327779] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
[ 0.327788] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
[ 0.327798] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
[ 0.327807] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
[ 0.327817] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
[ 0.327917] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.327927] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.327931] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.327934] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.327999] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.328018] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.328044] pci 0000:02:00.0: reg 0x18: [mem 0xf2fff000-0xf2ffffff 64bit pref]
[ 0.328060] pci 0000:02:00.0: reg 0x20: [mem 0xf2ff8000-0xf2ffbfff 64bit pref]
[ 0.328071] pci 0000:02:00.0: reg 0x30: [mem 0xf7cf0000-0xf7cfffff pref]
[ 0.328150] pci 0000:02:00.0: supports D1 D2
[ 0.328151] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330392] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.330399] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.330404] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.330413] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.330471] pci 0000:0a:04.0: [1106:3044] type 00 class 0x0c0010
[ 0.330487] pci 0000:0a:04.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
[ 0.330496] pci 0000:0a:04.0: reg 0x14: [io 0xec00-0xec7f]
[ 0.330563] pci 0000:0a:04.0: supports D2
[ 0.330564] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold
[ 0.330628] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.330632] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.330635] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.330640] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.330641] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.330643] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.330644] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.330646] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.330648] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[ 0.331241] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.331283] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.331323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.331365] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.331410] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.331452] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.331494] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.331535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.331577] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.331609] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.331690] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.331692] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.331693] vgaarb: loaded
[ 0.331694] vgaarb: bridge control possible 0000:01:00.0
[ 0.331757] SCSI subsystem initialized
[ 0.331789] libata version 3.00 loaded.
[ 0.331817] ACPI: bus type USB registered
[ 0.331832] usbcore: registered new interface driver usbfs
[ 0.331840] usbcore: registered new interface driver hub
[ 0.331858] usbcore: registered new device driver usb
[ 0.331939] PCI: Using ACPI for IRQ routing
[ 0.333118] PCI: Discovered peer bus 3f
[ 0.333119] PCI: root bus 3f: using default resources
[ 0.333120] PCI: Probing PCI hardware (bus 3f)
[ 0.333146] PCI host bridge to bus 0000:3f
[ 0.333148] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.333150] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.333151] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.333154] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.333160] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.333198] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.333236] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.333271] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.333308] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.333342] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.333380] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.333416] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.333451] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.333485] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.333521] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.333557] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.333592] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.333628] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.333663] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.333707] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.333709] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.333712] PCI: pci_cache_line_size set to 64 bytes
[ 0.333785] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.333786] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
[ 0.333880] NetLabel: Initializing
[ 0.333882] NetLabel: domain hash size = 128
[ 0.333882] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.333895] NetLabel: unlabeled traffic allowed by default
[ 0.333961] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.333967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[ 0.333971] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.336018] hpet: hpet2 irq 24 for MSI
[ 0.336055] hpet: hpet3 irq 25 for MSI
[ 0.336089] hpet: hpet4 irq 26 for MSI
[ 0.336125] hpet: hpet5 irq 27 for MSI
[ 0.336155] Switched to clocksource hpet
[ 0.341809] pnp: PnP ACPI init
[ 0.341884] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.341887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341948] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.342105] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.342108] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342289] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.342291] system 00:03: [io 0x0800-0x087f] could not be reserved
[ 0.342293] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.342294] system 00:03: [io 0x0600-0x0607] has been reserved
[ 0.342297] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.342298] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.342300] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.342302] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342393] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.342396] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342552] pnp 00:05: [dma 0 disabled]
[ 0.342595] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.342687] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.342690] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.342692] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342770] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.342773] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342919] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.342921] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.342923] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.342925] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.342927] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.342929] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.343026] pnp: PnP ACPI: found 9 devices
[ 0.349700] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
[ 0.349703] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
[ 0.349705] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000
[ 0.349712] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.349714] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.349716] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000
[ 0.349723] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
[ 0.349725] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
[ 0.349727] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000
[ 0.349733] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
[ 0.349735] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
[ 0.349737] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
[ 0.349768] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349770] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349772] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349774] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349775] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349777] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349779] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.349781] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.349782] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349784] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349786] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349787] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.349792] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[ 0.349796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349798] pci 0000:00:1c.1: BAR 14: assigned [mem 0xe0400000-0xe05fffff]
[ 0.349802] pci 0000:00:1c.1: BAR 15: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349804] pci 0000:00:1c.2: BAR 14: assigned [mem 0xe0800000-0xe09fffff]
[ 0.349808] pci 0000:00:1c.2: BAR 15: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349810] pci 0000:00:1c.3: BAR 14: assigned [mem 0xe0c00000-0xe0dfffff]
[ 0.349813] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349816] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.349818] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.349820] pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.349822] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.349825] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.349828] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
[ 0.349831] pci 0000:00:03.0: bridge window [mem 0xf4000000-0xf7bfffff]
[ 0.349834] pci 0000:00:03.0: bridge window [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.349837] pci 0000:00:1c.0: PCI bridge to [bus 09]
[ 0.349839] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.349843] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.349846] pci 0000:00:1c.0: bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349851] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.349853] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.349857] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe05fffff]
[ 0.349860] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349864] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.349867] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.349870] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe09fffff]
[ 0.349874] pci 0000:00:1c.2: bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349878] pci 0000:00:1c.3: PCI bridge to [bus 06]
[ 0.349881] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.349884] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe0dfffff]
[ 0.349887] pci 0000:00:1c.3: bridge window [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349892] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.349896] pci 0000:00:1c.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.349902] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.349911] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.349913] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.349917] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.349923] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.349925] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.349929] pci 0000:00:1c.7: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.349932] pci 0000:00:1c.7: bridge window [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.349937] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.349939] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.349943] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.349950] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.349951] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.349953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349954] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.349956] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.349957] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.349959] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.349961] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7bfffff]
[ 0.349962] pci_bus 0000:01: resource 2 [mem 0xe4000000-0xefffffff 64bit pref]
[ 0.349964] pci_bus 0000:09: resource 0 [io 0x1000-0x1fff]
[ 0.349965] pci_bus 0000:09: resource 1 [mem 0xe0000000-0xe01fffff]
[ 0.349967] pci_bus 0000:09: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[ 0.349969] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
[ 0.349970] pci_bus 0000:08: resource 1 [mem 0xe0400000-0xe05fffff]
[ 0.349972] pci_bus 0000:08: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[ 0.349973] pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
[ 0.349975] pci_bus 0000:07: resource 1 [mem 0xe0800000-0xe09fffff]
[ 0.349976] pci_bus 0000:07: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[ 0.349978] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.349979] pci_bus 0000:06: resource 1 [mem 0xe0c00000-0xe0dfffff]
[ 0.349981] pci_bus 0000:06: resource 2 [mem 0xe0e00000-0xe0ffffff 64bit pref]
[ 0.349983] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.349984] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.349986] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.349988] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.349989] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.349991] pci_bus 0000:02: resource 2 [mem 0xf2f00000-0xf2ffffff 64bit pref]
[ 0.349992] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
[ 0.349994] pci_bus 0000:0a: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.349995] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.349997] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.349998] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.350000] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.350001] pci_bus 0000:0a: resource 8 [mem 0xe0000000-0xf7ffffff]
[ 0.350003] pci_bus 0000:0a: resource 9 [mem 0xfc000000-0xfed8ffff]
[ 0.350005] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.350007] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.350036] NET: Registered protocol family 2
[ 0.350230] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.350469] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.350807] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.350836] TCP: reno registered
[ 0.350849] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.350906] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.351010] NET: Registered protocol family 1
[ 0.351339] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.351488] PCI: CLS 32 bytes, default 64
[ 0.351533] Unpacking initramfs...
[ 0.583264] Freeing initrd memory: 17052K (ffff880035ea3000 - ffff880036f4a000)
[ 0.583282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.583284] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
[ 0.583527] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583533] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583539] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583545] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[ 0.583596] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.584304] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.584359] Initialise system trusted keyring
[ 0.584382] audit: initializing netlink subsys (disabled)
[ 0.584396] audit: type=2000 audit(1425373014.368:1): initialized
[ 0.584698] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.585987] zpool: loaded
[ 0.585989] zbud: loaded
[ 0.586163] VFS: Disk quotas dquot_6.5.2
[ 0.586198] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.586529] msgmni has been set to 15958
[ 0.586585] Key type big_key registered
[ 0.586588] SELinux: Registering netfilter hooks
[ 0.587451] alg: No test for stdrng (krng)
[ 0.587460] NET: Registered protocol family 38
[ 0.587467] Key type asymmetric registered
[ 0.587469] Asymmetric key parser 'x509' registered
[ 0.587502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.587541] io scheduler noop registered
[ 0.587543] io scheduler deadline registered
[ 0.587570] io scheduler cfq registered (default)
[ 0.587789] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.587879] pcieport 0000:00:1c.1: enabling device (0104 -> 0107)
[ 0.587966] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.588057] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.588461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.588475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.588515] intel_idle: MWAIT substates: 0x1120
[ 0.588520] intel_idle: v0.4 model 0x1E
[ 0.588521] intel_idle: lapic_timer_reliable_states 0x2
[ 0.588707] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.588710] ACPI: Power Button [PWRB]
[ 0.588743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.588745] ACPI: Power Button [PWRF]
[ 0.588921] GHES: HEST is not enabled!
[ 0.588994] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.609594] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.610033] Non-volatile memory driver v1.3
[ 0.610036] Linux agpgart interface v0.103
[ 0.610172] ahci 0000:03:00.0: version 3.0
[ 0.620618] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.620626] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.621296] scsi host0: ahci
[ 0.621938] scsi host1: ahci
[ 0.622039] ata1: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe100 irq 18
[ 0.622044] ata2: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe180 irq 18
[ 0.622085] ata_piix 0000:00:1f.2: version 2.13
[ 0.622159] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.623295] scsi host2: ata_piix
[ 0.623632] scsi host3: ata_piix
[ 0.623730] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[ 0.623734] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[ 0.623810] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.624831] scsi host4: ata_piix
[ 0.625226] scsi host5: ata_piix
[ 0.625309] ata5: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[ 0.625314] ata6: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[ 0.625404] libphy: Fixed MDIO Bus: probed
[ 0.625562] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.625668] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[ 0.625853] xhci_hcd 0000:05:00.0: irq 29 for MSI/MSI-X
[ 0.625858] xhci_hcd 0000:05:00.0: irq 30 for MSI/MSI-X
[ 0.625862] xhci_hcd 0000:05:00.0: irq 31 for MSI/MSI-X
[ 0.625866] xhci_hcd 0000:05:00.0: irq 32 for MSI/MSI-X
[ 0.625870] xhci_hcd 0000:05:00.0: irq 33 for MSI/MSI-X
[ 0.626532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.626538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.626542] usb usb1: Product: xHCI Host Controller
[ 0.626546] usb usb1: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[ 0.626549] usb usb1: SerialNumber: 0000:05:00.0
[ 0.627036] hub 1-0:1.0: USB hub found
[ 0.627122] hub 1-0:1.0: 2 ports detected
[ 0.627626] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.627851] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.629193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.629195] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629197] usb usb2: Product: xHCI Host Controller
[ 0.629198] usb usb2: Manufacturer: Linux 3.18.7-200.fc21.x86_64 xhci-hcd
[ 0.629200] usb usb2: SerialNumber: 0000:05:00.0
[ 0.629415] hub 2-0:1.0: USB hub found
[ 0.629427] hub 2-0:1.0: 2 ports detected
[ 0.629557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.629563] ehci-pci: EHCI PCI platform driver
[ 0.629648] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.629821] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.629840] ehci-pci 0000:00:1a.0: debug port 2
[ 0.633779] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[ 0.633791] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3ffe000
[ 0.639612] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.639678] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.639683] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.639687] usb usb3: Product: EHCI Host Controller
[ 0.639690] usb usb3: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[ 0.639694] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.640028] hub 3-0:1.0: USB hub found
[ 0.640034] hub 3-0:1.0: 2 ports detected
[ 0.640204] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.640406] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.640425] ehci-pci 0000:00:1d.0: debug port 2
[ 0.644346] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[ 0.644359] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3ffd000
[ 0.649623] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.649690] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.649695] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.649698] usb usb4: Product: EHCI Host Controller
[ 0.649702] usb usb4: Manufacturer: Linux 3.18.7-200.fc21.x86_64 ehci_hcd
[ 0.649705] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.650038] hub 4-0:1.0: USB hub found
[ 0.650043] hub 4-0:1.0: 2 ports detected
[ 0.650135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.650141] ohci-pci: OHCI PCI platform driver
[ 0.650151] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.650192] usbcore: registered new interface driver usbserial
[ 0.650197] usbcore: registered new interface driver usbserial_generic
[ 0.650204] usbserial: USB Serial support registered for generic
[ 0.650230] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.652824] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.652829] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.653073] mousedev: PS/2 mouse device common for all mice
[ 0.653988] rtc_cmos 00:01: RTC can wake from S4
[ 0.654281] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.654321] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.654405] device-mapper: uevent: version 1.0.3
[ 0.654683] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[ 0.655300] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.655401] usbcore: registered new interface driver usbhid
[ 0.655402] usbhid: USB HID core driver
[ 0.655453] drop_monitor: Initializing network drop monitor service
[ 0.655558] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.655930] TCP: cubic registered
[ 0.655935] Initializing XFRM netlink socket
[ 0.656028] NET: Registered protocol family 10
[ 0.656211] mip6: Mobile IPv6
[ 0.656214] NET: Registered protocol family 17
[ 0.657266] Loading compiled-in X.509 certificates
[ 0.658240] Loaded X.509 cert 'Fedora kernel signing key: c406af3b4a8ec27de35610fad348e54ba39e284a'
[ 0.658255] registered taskstats version 1
[ 0.658952] Magic number: 7:941:926
[ 0.659195] rtc_cmos 00:01: setting system clock to 2015-03-03 08:56:54 UTC (1425373014)
[ 0.659238] PM: Hibernation image not present or could not be loaded.
[ 0.927006] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.927045] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.941921] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.941935] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 0.951984] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.056733] usb 3-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.056739] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.057259] hub 3-1:1.0: USB hub found
[ 1.057455] hub 3-1:1.0: 6 ports detected
[ 1.066869] usb 4-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.066875] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.067152] hub 4-1:1.0: USB hub found
[ 1.067254] hub 4-1:1.0: 8 ports detected
[ 1.082161] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.085384] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 1.107345] ata5.00: configured for UDMA/100
[ 1.344711] usb 4-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.385566] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.385577] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.385693] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.385704] ata4.01: SATA link down (SStatus 0 SControl 300)
[ 1.389079] ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 1.389085] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.389425] ata4.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.389431] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.393435] ata4.00: configured for UDMA/133
[ 1.394935] ata3.00: configured for UDMA/133
[ 1.395367] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 1.396090] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.396138] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.396453] sd 2:0:0:0: [sda] Write Protect is off
[ 1.396457] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.396605] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB51 PQ: 0 ANSI: 5
[ 1.396626] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.397048] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.397054] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.397077] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.397203] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.397205] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.397383] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.401545] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 1.418396] sdb:
[ 1.419028] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.424387] usb 4-1.1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.424393] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.424397] usb 4-1.1: Product: USB Receiver
[ 1.424401] usb 4-1.1: Manufacturer: Logitech
[ 1.434182] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.434188] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.434316] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.434402] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 1.435420] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 1.437446] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.438820] Freeing unused kernel memory: 1500K (ffffffff81d36000 - ffffffff81ead000)
[ 1.438822] Write protecting the kernel read-only data: 12288k
[ 1.440552] Freeing unused kernel memory: 588K (ffff88000176d000 - ffff880001800000)
[ 1.442385] Freeing unused kernel memory: 820K (ffff880001b33000 - ffff880001c00000)
[ 1.443992] random: systemd urandom read with 40 bits of entropy available
[ 1.506621] usb 4-1.3: new low-speed USB device number 4 using ehci-pci
[ 1.585646] tsc: Refined TSC clocksource calibration: 2808.713 MHz
[ 1.587891] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 1.587894] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.587896] usb 4-1.3: Product: USB Laser Mouse
[ 1.587897] usb 4-1.3: Manufacturer: Logitech
[ 1.593804] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0004/input/input5
[ 1.593984] hid-generic 0003:046D:C062.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1.614226] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.614819] scsi host6: pata_jmicron
[ 1.614910] scsi host7: pata_jmicron
[ 1.614954] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.614955] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.625344] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.625352] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.625527] r8169 0000:02:00.0: irq 34 for MSI/MSI-X
[ 1.625712] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90004ec6000, bc:ae:c5:04:c0:26, XID 083000c0 IRQ 34
[ 1.625714] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.639718] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.666900] usb 4-1.4: new full-speed USB device number 5 using ehci-pci
[ 1.676775] firewire_ohci 0000:0a:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.758321] usb 4-1.4: New USB device found, idVendor=045e, idProduct=028e
[ 1.758324] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.758326] usb 4-1.4: Product: Controller
[ 1.758328] usb 4-1.4: Manufacturer: ©Microsoft Corporation
[ 1.758329] usb 4-1.4: SerialNumber: 39BAE5B
[ 1.834240] usb 4-1.5: new low-speed USB device number 6 using ehci-pci
[ 1.847624] random: nonblocking pool is initialized
[ 1.927043] usb 4-1.5: New USB device found, idVendor=1113, idProduct=3163
[ 1.927046] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.927048] usb 4-1.5: Product: MEDION MD 86360
[ 1.927050] usb 4-1.5: Manufacturer: SYSGRATION
[ 1.931088] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:1113:3163.0005/input/input6
[ 1.931278] hid-generic 0003:1113:3163.0005: input,hidraw1: USB HID v1.00 Keyboard [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input0
[ 1.937403] input: SYSGRATION MEDION MD 86360 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.1/0003:1113:3163.0006/input/input7
[ 1.937981] hid-generic 0003:1113:3163.0006: input,hiddev0,hidraw2: USB HID v1.00 Mouse [SYSGRATION MEDION MD 86360] on usb-0000:00:1d.0-1.5/input1
[ 1.943924] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input2
[ 1.996911] input: Logitech Unifying Device. Wireless PID:4008 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input8
[ 1.997037] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-0000:00:1d.0-1.1:1
[ 2.004813] input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0008/input/input9
[ 2.005047] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:1d.0-1.1:2
[ 2.008151] PM: Starting manual resume from disk
[ 2.008155] PM: Hibernation image partition 8:3 present
[ 2.008156] PM: Looking for hibernation image.
[ 2.018832] PM: Image not found (code -22)
[ 2.018834] PM: Hibernation image not present or could not be loaded.
[ 2.080724] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.178411] firewire_core 0000:0a:04.0: created device fw0: GUID 001fc6000005cec6, S400
[ 2.397837] systemd-journald[124]: Received SIGTERM from PID 1 (systemd).
[ 2.587227] Switched to clocksource tsc
[ 2.740200] audit: type=1404 audit(1425373016.577:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 2.807499] SELinux: 2048 avtab hash slots, 104708 rules.
[ 2.823964] SELinux: 2048 avtab hash slots, 104708 rules.
[ 2.850149] SELinux: 8 users, 103 roles, 4987 types, 295 bools, 1 sens, 1024 cats
[ 2.850152] SELinux: 83 classes, 104708 rules
[ 2.854273] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 2.854278] SELinux: the above unknown classes and permissions will be allowed
[ 2.854281] SELinux: Completing initialization.
[ 2.854282] SELinux: Setting up existing superblocks.
[ 2.854286] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 2.854295] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 2.854299] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2.854349] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.854361] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 2.854851] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 2.855922] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 2.855924] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 2.855928] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 2.855930] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 2.855932] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 2.855945] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 2.855950] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 2.855955] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 2.855964] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 2.856275] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 2.856277] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856282] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856345] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 2.856371] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856375] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[ 2.856377] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856378] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856380] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856386] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856390] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856397] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856399] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 2.856401] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 2.856408] SELinux: initialized (dev sda2, type ext4), uses xattr
[ 2.860553] audit: type=1403 audit(1425373016.697:3): policy loaded auid=4294967295 ses=4294967295
[ 2.889019] systemd[1]: Successfully loaded SELinux policy in 156.056ms.
[ 3.002923] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 3.029735] systemd[1]: Relabelled /dev and /run in 17.944ms.
[ 4.327767] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 4.419144] systemd-readahead[388]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 5.057047] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.057074] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.428463] RPC: Registered named UNIX socket transport module.
[ 5.428465] RPC: Registered udp transport module.
[ 5.428466] RPC: Registered tcp transport module.
[ 5.428467] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.428986] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 6.111097] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.641992] systemd-journald[391]: Received request to flush runtime journal from PID 1
[ 6.689304] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.689948] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[ 10.826142] ATK0110 ATK0110:00: EC enabled
[ 10.984132] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.307104] EDAC MC: Ver: 3.0.0
[ 11.311270] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140926/utaddress-258)
[ 11.311275] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311278] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[ 11.311281] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[ 11.311284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311285] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS1) (20140926/utaddress-258)
[ 11.311287] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (\GPS0) (20140926/utaddress-258)
[ 11.311289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.311308] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.389674] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.434347] [drm] Initialized drm 1.1.0 20060810
[ 11.557435] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 11.557471] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 11.557477] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 11.698127] iTCO_vendor_support: vendor-support=0
[ 11.722278] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 11.770689] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 12.047637] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 12.047716] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 12.047723] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 12.058370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.058393] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[ 12.058618] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.067016] sound hdaudioC0D0: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[ 12.067019] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.067021] sound hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 12.067022] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.067023] sound hdaudioC0D0: dig-out=0x2d/0x2e
[ 12.067025] sound hdaudioC0D0: inputs:
[ 12.067027] sound hdaudioC0D0: Front Mic=0x29
[ 12.067028] sound hdaudioC0D0: Rear Mic=0x2b
[ 12.067030] sound hdaudioC0D0: Line=0x2a
[ 12.067031] sound hdaudioC0D0: CD=0x2c
[ 12.077394] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.077480] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.077935] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.078721] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.078899] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.078967] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.079045] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.079128] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.268413] nvidia: module license 'NVIDIA' taints kernel.
[ 12.268415] Disabling lock debugging due to kernel taint
[ 12.273431] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 12.278269] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.278493] SELinux: initialized (dev drm, type drm), not configured for labeling
[ 12.278676] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 12.278685] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.76 Thu Jan 22 12:11:08 PST 2015
[ 12.354203] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 12.354281] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 12.354364] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input20
[ 12.354435] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input21
[ 14.022100] Adding 8388604k swap on /dev/sda3. Priority:-1 extents:1 across:8388604k FS
[ 14.254237] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.254244] SELinux: initialized (dev sda5, type ext4), uses xattr
[ 14.278149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.322516] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 14.792579] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/input/input22
[ 14.792841] usbcore: registered new interface driver xpad
[ 15.422940] audit: type=1305 audit(1425369429.245:4): audit_pid=621 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[ 16.841410] vboxdrv: Found 4 processor cores.
[ 16.841735] vboxdrv: fAsync=0 offMin=0x24f offMax=0x22ec
[ 16.841810] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.841811] vboxdrv: Successfully loaded version 4.3.22 (interface 0x001a0009).
[ 16.921232] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.937325] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.969409] Ebtables v2.0 registered
[ 16.984226] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 17.050994] vboxpci: IOMMU not found (not registered)
[ 17.265986] r8169 0000:02:00.0 enp2s0: link down
[ 17.265996] r8169 0000:02:00.0 enp2s0: link down
[ 19.310997] r8169 0000:02:00.0 enp2s0: link up
[ 24.976676] nvidia 0000:01:00.0: irq 36 for MSI/MSI-X
[ 26.013896] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.627542] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 90.888461] Bluetooth: Core ver 2.19
[ 90.888526] NET: Registered protocol family 31
[ 90.888527] Bluetooth: HCI device and connection manager initialized
[ 90.888535] Bluetooth: HCI socket layer initialized
[ 90.888537] Bluetooth: L2CAP socket layer initialized
[ 90.888542] Bluetooth: SCO socket layer initialized
[ 90.972221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 90.972223] Bluetooth: BNEP filters: protocol multicast
[ 90.972230] Bluetooth: BNEP socket layer initialized
[ 91.108353] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 247.611805] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 881.703916] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1517.828804] EXT4-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended
[ 1517.832453] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
[ 1517.832460] SELinux: initialized (dev sdb, type ext4), uses xattr
[ 1778.770464] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 1934.680948] perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2011.076021] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2991.964745] usb 4-1.3: USB disconnect, device number 4
[ 2992.160890] usb 4-1.3: new low-speed USB device number 7 using ehci-pci
[ 2992.253255] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2992.253262] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2992.253266] usb 4-1.3: Product: USB Laser Mouse
[ 2992.253270] usb 4-1.3: Manufacturer: Logitech
[ 2992.259027] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.0009/input/input23
[ 2992.259845] hid-generic 0003:046D:C062.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2993.246308] usb 4-1.3: USB disconnect, device number 7
[ 2993.442379] usb 4-1.3: new low-speed USB device number 8 using ehci-pci
[ 2993.534357] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c062
[ 2993.534364] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2993.534368] usb 4-1.3: Product: USB Laser Mouse
[ 2993.534372] usb 4-1.3: Manufacturer: Logitech
[ 2993.539784] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C062.000A/input/input24
[ 2993.540569] hid-generic 0003:046D:C062.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2994.844946] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[ 2994.932310] usb 3-1.2: New USB device found, idVendor=04a9, idProduct=173b
[ 2994.932317] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2994.932321] usb 3-1.2: Product: MP270 series
[ 2994.932324] usb 3-1.2: Manufacturer: Canon
[ 2994.932328] usb 3-1.2: SerialNumber: 82F63D
[ 2994.998808] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 2994.998832] usbcore: registered new interface driver usblp
[ 2996.117965] usblp0: removed
[ 2996.121635] usblp 3-1.2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173B
[ 3678.903000] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 3851.856087] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 4445.810475] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 4924.572682] usb 3-1.2: USB disconnect, device number 3
[ 4924.573317] usblp0: removed
[ 4929.205924] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[ 4929.294215] usb 3-1.2: New USB device found, idVendor=0718, idProduct=0628
[ 4929.294222] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4929.294226] usb 3-1.2: Product: Trans-It Drive
[ 4929.294230] usb 3-1.2: Manufacturer: TDKMedia
[ 4929.294233] usb 3-1.2: SerialNumber: 07981303AD5E1EE5
[ 4929.375297] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 4929.375643] scsi host8: usb-storage 3-1.2:1.0
[ 4929.375736] usbcore: registered new interface driver usb-storage
[ 4929.382254] usbcore: registered new interface driver uas
[ 4930.406854] scsi 8:0:0:0: Direct-Access TDKMedia Trans-It Drive PMAP PQ: 0 ANSI: 0 CCS
[ 4930.408579] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 4931.263369] sd 8:0:0:0: [sdc] 7806976 512-byte logical blocks: (3.99 GB/3.72 GiB)
[ 4931.264194] sd 8:0:0:0: [sdc] Write Protect is off
[ 4931.264201] sd 8:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 4931.265583] sd 8:0:0:0: [sdc] No Caching mode page found
[ 4931.265591] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 4931.292547] sdc: sdc1 sdc2 sdc3
[ 4931.296345] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 4943.485162] usb 3-1.2: USB disconnect, device number 4
[ 4950.569020] usb 3-1.2: new high-speed USB device number 5 using ehci-pci
[ 4950.663523] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=0184
[ 4950.663529] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4950.663534] usb 3-1.2: Product: USB2.0-CRW
[ 4950.663537] usb 3-1.2: Manufacturer: Generic
[ 4950.663541] usb 3-1.2: SerialNumber: 20100818841300000
[ 4950.668062] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 4950.668692] scsi host9: usb-storage 3-1.2:1.0
[ 4951.673771] scsi 9:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4951.675862] scsi 9:0:0:1: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4951.676434] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 4951.676766] sd 9:0:0:1: Attached scsi generic sg4 type 0
[ 4952.247791] sd 9:0:0:1: [sdd] 30965760 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 4952.249510] sd 9:0:0:1: [sdd] Write Protect is off
[ 4952.249513] sd 9:0:0:1: [sdd] Mode Sense: 03 00 00 00
[ 4952.251088] sd 9:0:0:1: [sdd] No Caching mode page found
[ 4952.251092] sd 9:0:0:1: [sdd] Assuming drive cache: write through
[ 4952.252787] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 4952.258545] sdd: sdd1 sdd2 sdd3
[ 4952.265124] sd 9:0:0:1: [sdd] Attached SCSI removable disk
[ 4968.425606] usb 3-1.2: USB disconnect, device number 5
[ 6021.234029] usb 3-1.2: new high-speed USB device number 6 using ehci-pci
[ 6021.328833] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=0184
[ 6021.328839] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6021.328844] usb 3-1.2: Product: USB2.0-CRW
[ 6021.328847] usb 3-1.2: Manufacturer: Generic
[ 6021.328851] usb 3-1.2: SerialNumber: 20100818841300000
[ 6021.333337] usb-storage 3-1.2:1.0: USB Mass Storage device detected
[ 6021.333715] scsi host10: usb-storage 3-1.2:1.0
[ 6022.339001] scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 6022.341075] scsi 10:0:0:1: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 6022.341838] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 6022.342350] sd 10:0:0:1: Attached scsi generic sg4 type 0
[ 6022.914166] sd 10:0:0:1: [sdd] 30965760 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 6022.915861] sd 10:0:0:1: [sdd] Write Protect is off
[ 6022.915867] sd 10:0:0:1: [sdd] Mode Sense: 03 00 00 00
[ 6022.917602] sd 10:0:0:1: [sdd] No Caching mode page found
[ 6022.917609] sd 10:0:0:1: [sdd] Assuming drive cache: write through
[ 6022.919437] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 6022.924890] sdd: sdd1 sdd2 sdd3
[ 6022.929705] sd 10:0:0:1: [sdd] Attached SCSI removable disk
[ 6241.665453] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 6241.682493] usb 2-2: New USB device found, idVendor=0bc2, idProduct=3320
[ 6241.682498] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6241.682500] usb 2-2: Product: Expansion Desk
[ 6241.682503] usb 2-2: Manufacturer: Seagate
[ 6241.682505] usb 2-2: SerialNumber: NA4LLYWT
[ 6241.683573] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 6241.686618] usb-storage 2-2:1.0: Quirks match for vid 0bc2 pid 3320: 2000000
[ 6241.686688] scsi host11: usb-storage 2-2:1.0
[ 6242.690533] scsi 11:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6
[ 6242.691309] sd 11:0:0:0: [sde] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6242.691506] sd 11:0:0:0: Attached scsi generic sg5 type 0
[ 6242.691931] sd 11:0:0:0: [sde] Write Protect is off
[ 6242.691936] sd 11:0:0:0: [sde] Mode Sense: 43 00 00 00
[ 6242.692585] sd 11:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6242.753017] sde: sde1
[ 6242.755965] sd 11:0:0:0: [sde] Attached SCSI disk
[ 6284.120937] EXT4-fs (dm-0): warning: mounting fs with errors, running e2fsck is recommended
[ 6284.129316] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 6284.129324] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 6585.419794] EXT4-fs (dm-0): error count since last fsck: 2
[ 6585.419799] EXT4-fs (dm-0): initial error at time 1415269424: __ext4_get_inode_loc:3920: inode 50868888: block 203424585
[ 6585.419803] EXT4-fs (dm-0): last error at time 1415269425: __ext4_get_inode_loc:3920: inode 17436425: block 69730576
[ 7456.011610] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 8548.706906] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8563.953110] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8567.069203] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8572.941707] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8672.110941] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8704.062755] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8860.772466] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 8968.489755] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 9177.810064] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[10578.279151] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[10788.873186] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[10788.921142] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[11060.168478] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[14663.708741] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[14759.500752] w83627ehf: Forcibly enabling Super-I/O. Sensor is probably unusable.
[14759.500762] w83627ehf: Found W83667HG-B chip at 0x290
[16610.234101] ------------[ cut here ]------------
[16610.234126] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x23e/0x250()
[16610.234131] NETDEV WATCHDOG: enp2s0 (r8169): transmit queue 0 timed out
[16610.234134] Modules linked in: w83627ehf hwmon_vid dm_crypt uas usb_storage usblp bnep bluetooth rfkill ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack vboxpci(OE) vboxnetadp(OE) vboxnetflt(OE) ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw vboxdrv(OE) xpad joydev nvidia(POE) snd_hda_codec_hdmi snd_hda_codec_via snd_hda_codec_generic iTCO_wdt snd_hda_intel snd_hda_controller coretemp snd_hda_codec kvm_intel gpio_ich iTCO_vendor_support snd_hwdep i7core_edac drm kvm snd_seq crc32c_intel i2c_i801 lpc_ich edac_core snd_seq_device
[16610.234201] mfd_core snd_pcm snd_timer snd soundcore serio_raw shpchp asus_atk0110 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc hid_logitech_dj r8169 firewire_ohci firewire_core ata_generic pata_acpi crc_itu_t mii pata_jmicron
[16610.234231] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P OE 3.18.7-200.fc21.x86_64 #1
[16610.234234] Hardware name: System manufacturer System Product Name/P7P55D-E, BIOS 1404 10/29/2010
[16610.234238] 0000000000000000 9287a963bbeb8164 ffff88021fc03d28 ffffffff8175e686
[16610.234243] 0000000000000000 ffff88021fc03d80 ffff88021fc03d68 ffffffff810991d1
[16610.234248] ffff88021fc0e1c0 0000000000000000 ffff8802122d6000 0000000000000000
[16610.234253] Call Trace:
[16610.234256] <IRQ> [<ffffffff8175e686>] dump_stack+0x46/0x58
[16610.234269] [<ffffffff810991d1>] warn_slowpath_common+0x81/0xa0
[16610.234275] [<ffffffff81099245>] warn_slowpath_fmt+0x55/0x70
[16610.234282] [<ffffffff8110d206>] ? clockevents_program_event+0x76/0x100
[16610.234290] [<ffffffff8166e62e>] dev_watchdog+0x23e/0x250
[16610.234295] [<ffffffff8166e3f0>] ? dev_graft_qdisc+0x80/0x80
[16610.234301] [<ffffffff810fd52a>] call_timer_fn+0x3a/0x120
[16610.234306] [<ffffffff8166e3f0>] ? dev_graft_qdisc+0x80/0x80
[16610.234311] [<ffffffff810ff692>] run_timer_softirq+0x212/0x2f0
[16610.234317] [<ffffffff8109d7a4>] __do_softirq+0x124/0x2d0
[16610.234321] [<ffffffff8109db75>] irq_exit+0x125/0x130
[16610.234328] [<ffffffff817680fa>] do_IRQ+0x5a/0xf0
[16610.234335] [<ffffffff81765f2d>] common_interrupt+0x6d/0x6d
[16610.234337] <EOI> [<ffffffff8110cf81>] ? clockevents_notify+0x51/0x1d0
[16610.234349] [<ffffffff815e8e93>] ? cpuidle_enter_state+0x63/0x160
[16610.234357] [<ffffffff815e8e81>] ? cpuidle_enter_state+0x51/0x160
[16610.234363] [<ffffffff815e9077>] cpuidle_enter+0x17/0x20
[16610.234369] [<ffffffff810dacd2>] cpu_startup_entry+0x362/0x410
[16610.234375] [<ffffffff81753eb7>] rest_init+0x77/0x80
[16610.234382] [<ffffffff81d4c029>] start_kernel+0x4a1/0x4c2
[16610.234388] [<ffffffff81d4b120>] ? early_idt_handlers+0x120/0x120
[16610.234393] [<ffffffff81d4b4d7>] x86_64_start_reservations+0x2a/0x2c
[16610.234398] [<ffffffff81d4b62b>] x86_64_start_kernel+0x152/0x175
[16610.234402] ---[ end trace 44c9f5d96c8505f5 ]---
[16610.243420] r8169 0000:02:00.0 enp2s0: link up
[16632.014705] usb 3-1.1: new high-speed USB device number 7 using ehci-pci
[16632.101645] usb 3-1.1: New USB device found, idVendor=04b0, idProduct=033f
[16632.101653] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16632.101655] usb 3-1.1: Product: NIKON DSC COOLPIX S2700-PTP
[16632.101656] usb 3-1.1: Manufacturer: NIKON
[16632.101658] usb 3-1.1: SerialNumber: 000041111678
[18267.591217] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[19401.677802] sdd: sdd1 sdd2
[20126.024148] usb 3-1.1: USB disconnect, device number 7
[20476.477134] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[20477.048777] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[21479.434512] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[21530.785481] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[21642.446828] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[21872.313634] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[22342.442324] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[23651.379663] dumpe2fs[23247]: segfault at 0 ip 00007fdbdb29b3fa sp 00007fff0a516338 error 4 in libc-2.20.so[7fdbdb210000+1b4000]
[23652.968152] sdd: sdd1 sdd2
[25475.718043] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[27443.115085] usb 2-2: USB disconnect, device number 2
[27443.119999] sd 11:0:0:0: [sde] Synchronizing SCSI cache
[27443.120054] sd 11:0:0:0: [sde]
[27443.120057] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[29080.059370] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[32684.204902] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs