Bonjour,
Je suis nouvelle sur Fedora. Je viens d'installer le système alors que j'étais sur Xubuntu, et j'étais confrontée au même problème, que voici :
Je ne parviens pas à me connecter en Wifi.
L'ordinateur détecte bien le réseau, quand je lui demande de se connecter il me demande la clé, mais ne se connecte pas et me redemande la clé.
Je ne trouve pas de solution...
J'ai essayé plusieurs distri c'est toujours la même chose... de quoi cela peut-il venir ? Serait-ce ma carte réseau ? Est ce possible qu'elle détecte le réseau mais ne s'y connecte pas ? Comment en être sûr ? Il y a une commande pour le vérifier ?
Voici quelques infos :
ifconfig
enp0s29f7u1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.42.226 netmask 255.255.255.0 broadcast 0.0.0.0
inet6 fe80::54:60ff:fe37:6234 prefixlen 64 scopeid 0x20<link>
ether 02:54:60:37:62:34 txqueuelen 1000 (Ethernet)
RX packets 504 bytes 382073 (373.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 508 bytes 77043 (75.2 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Boucle locale)
RX packets 388 bytes 33748 (32.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 388 bytes 33748 (32.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
p8p1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:9e:01:57:35:46 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet6 fe80::6a94:23ff:febb:eaf2 prefixlen 64 scopeid 0x20<link>
ether 68:94:23:bb:ea:f2 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 19
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
lspci
00:00.0 Host bridge: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
iwconfig
lo no wireless extensions.
enp0s29f7u1 no wireless extensions.
wlp2s0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
p8p1 no wireless extensions.
Actuellement j'ai branché mon smartphone et activé le service modem du téléphone pour relayer la wifi. Ça fonctionne très bien mais bon c'est pas super pratique quand même...
Si pour m'aider il vous faut d'autres infos n'hésitez pas à me demander ! Merci ...