Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

tuner tnt asus europa II et configuration !

ptilou

Bonjour,

J'ai fait diver essai pour configurer la carte tuner, ils sont infructueux ...
Kaffeine detecte la carte, mais ne trouve aucune chaine, je pensais que c'etait du a une recherche sur le bus d'aquisition RGB, mais en branchant une source video sur ce dernier, kaffeine me dit que plus aucun peripherique n'est disponible !
( Donc la carte fonctionne bien ...?)

Voila les diverse information releve, qui me permetrons d'etre aider.

[ 7.339286] Linux video capture interface: v2.00
[ 7.377040] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[ 7.377266] saa7134[0]: found at 0000:02:05.0, rev: 1, irq: 17, latency: 32, mmio: 0xfdefe000
[ 7.377275] saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM [card=100,autodetected]
[ 7.377296] saa7134[0]: board init: gpio is 0
[ 7.425214] iTCO_vendor_support: vendor-support=0
[ 7.432078] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 7.432394] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 7.434976] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.518042] saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 7.518061] saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 7.518076] saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
[ 7.518090] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518105] saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
[ 7.518119] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518133] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518148] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518162] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518176] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518190] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518205] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518219] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518233] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518248] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.518262] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.598890] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X

[ 8.047452] tda9887 4-0043: creating new instance
[ 8.047458] tda9887 4-0043: tda988[5/6/7] found
[ 8.050031] tuner 4-0043: Tuner 74 found with type(s) Radio TV.
[ 8.056096] tuner 4-0061: Tuner -1 found with type(s) Radio TV.
[ 8.076020] tuner-simple 4-0061: creating new instance
[ 8.076027] tuner-simple 4-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 8.098309] saa7134[0]: registered device video0 [v4l2]
[ 8.098533] saa7134[0]: registered device vbi0
[ 8.098663] saa7134[0]: registered device radio0
[ 8.121467] dvb_init() allocating 1 frontend
[ 8.173014] tuner-simple 4-0061: attaching existing instance
[ 8.173022] tuner-simple 4-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 8.173027] DVB: registering new adapter (saa7134[0])
[ 8.173036] saa7134 0000:02:05.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 8.193012] tda1004x: setting up plls for 53MHz sampling clock

[ 10.340012] tda1004x: timeout waiting for DSP ready
[ 10.350012] tda1004x: found firmware revision 0 -- invalid
[ 10.350016] tda1004x: trying to boot from eeprom
[ 12.118313] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.118336] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 12.659013] tda1004x: timeout waiting for DSP ready
[ 12.669012] tda1004x: found firmware revision 0 -- invalid
[ 12.669016] tda1004x: waiting for firmware upload...
[ 12.827115] tda1004x: no firmware upload (timeout or file not found?)
[ 12.827122] tda1004x: firmware upload failed
[ 12.898687] saa7134 ALSA driver for DMA sound loaded
[ 12.898741] saa7134[0]/alsa: saa7134[0] at 0xfdefe000 irq 17 registered as card -1

[ 392.015013] tda1004x: setting up plls for 53MHz sampling clock
[ 394.162012] tda1004x: timeout waiting for DSP ready
[ 394.172015] tda1004x: found firmware revision 0 -- invalid
[ 394.172019] tda1004x: trying to boot from eeprom
[ 396.481013] tda1004x: timeout waiting for DSP ready
[ 396.491011] tda1004x: found firmware revision 0 -- invalid
[ 396.491015] tda1004x: waiting for firmware upload...
[ 396.503097] tda1004x: no firmware upload (timeout or file not found?)
[ 396.503105] tda1004x: firmware upload failed
[ 508.912014] tda1004x: setting up plls for 53MHz sampling clock
[ 511.060012] tda1004x: timeout waiting for DSP ready
[ 511.070011] tda1004x: found firmware revision 0 -- invalid
[ 511.070015] tda1004x: trying to boot from eeprom
[ 513.379014] tda1004x: timeout waiting for DSP ready
[ 513.389012] tda1004x: found firmware revision 0 -- invalid
[ 513.389016] tda1004x: waiting for firmware upload...
[ 513.395206] tda1004x: no firmware upload (timeout or file not found?)
[ 513.395214] tda1004x: firmware upload failed
[ 812.900013] tda1004x: setting up plls for 53MHz sampling clock
[ 815.047012] tda1004x: timeout waiting for DSP ready
[ 815.057015] tda1004x: found firmware revision 0 -- invalid
[ 815.057019] tda1004x: trying to boot from eeprom
[ 817.364012] tda1004x: timeout waiting for DSP ready
[ 817.374010] tda1004x: found firmware revision 0 -- invalid
[ 817.374014] tda1004x: waiting for firmware upload...
[ 817.380737] tda1004x: no firmware upload (timeout or file not found?)
[ 817.380744] tda1004x: firmware upload failed
[ 1149.840012] tda1004x: setting up plls for 53MHz sampling clock
[ 1151.986015] tda1004x: timeout waiting for DSP ready
[ 1151.996139] tda1004x: found firmware revision 0 -- invalid
[ 1151.996145] tda1004x: trying to boot from eeprom
[ 1154.304011] tda1004x: timeout waiting for DSP ready
[ 1154.314011] tda1004x: found firmware revision 0 -- invalid
[ 1154.314015] tda1004x: waiting for firmware upload...
[ 1154.324320] tda1004x: no firmware upload (timeout or file not found?)
[ 1154.324327] tda1004x: firmware upload failed

[ 2146.834598] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2146.834607] nouveau E[gnome-shell[1495]] validate vram_list
[ 2146.834660] nouveau E[gnome-shell[1495]] validate: -12
[ 2146.983701] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2146.983710] nouveau E[gnome-shell[1495]] validate vram_list
[ 2146.983746] nouveau E[gnome-shell[1495]] validate: -12
[ 2147.263681] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2147.263689] nouveau E[gnome-shell[1495]] validate vram_list
[ 2147.263725] nouveau E[gnome-shell[1495]] validate: -12
[ 2152.003108] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2152.003116] nouveau E[gnome-shell[1495]] validate vram_list
[ 2152.003150] nouveau E[gnome-shell[1495]] validate: -12
[ 2153.737361] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2153.737369] nouveau E[gnome-shell[1495]] validate vram_list
[ 2153.737404] nouveau E[gnome-shell[1495]] validate: -12
[ 2153.817353] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2153.817362] nouveau E[gnome-shell[1495]] validate vram_list
[ 2153.817395] nouveau E[gnome-shell[1495]] validate: -12
[ 2153.897566] nouveau E[gnome-shell[1495]] fail ttm_validate
[ 2153.897574] nouveau E[gnome-shell[1495]] validate vram_list
[ 2153.897607] nouveau E[gnome-shell[1495]] validate: -12
[ 2948.840681] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)
[ 2948.840866] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)
[ 2948.841033] tuner-simple 4-0061: i2c i/o error: rc == -5 (should be 4)
[ 2948.841466] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)
[ 2948.842913] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)
[ 2948.843095] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)
[ 2948.843515] tuner-simple 4-0061: i2c i/o error: rc == -5 (should be 4)
[ 2948.844572] tda9887 4-0043: i2c i/o error: rc == -5 (should be 4)

Merci

Ptilou

Nicosss

Il te manque le firmware, il faut le trouver et l'installer.

Le module doit bien être présent

$ lsmod | grep 7134

Pense à utiliser les balises <code>.

ptilou

Bonjour,

J'ai ça pour la carte de chargé :

saa7134_alsa 18052 1
tda1004x 22703 1
saa7134_dvb 33618 0
videobuf_dvb 13498 1 saa7134_dvb
dvb_core 99044 1 videobuf_dvb
tuner_simple 17839 2
tuner_types 19197 1 tuner_simple
tda9887 17625 1
tda8290 21980 0
tuner 26767 2
iTCO_wdt 13256 0
iTCO_vendor_support 13243 1 iTCO_wdt
saa7134 156303 2 saa7134_dvb,saa7134_alsa
tveeprom 16918 1 saa7134
videobuf_dma_sg 18283 3 saa7134_dvb,saa7134,saa7134_alsa
videobuf_core 24013 3 videobuf_dma_sg,saa7134,videobuf_dvb
rc_core 25504 1 saa7134
v4l2_common 14661 2 tuner,saa7134
videodev 107826 3 tuner,saa7134,v4l2_common
media 19980 1 videodev
snd 59125 17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,saa7134_alsa
soundcore 14123 1 snd
uinput 17254 0
i2c_i801 17782 0
of_i2c 12907 1 i2c_i801
video 18595 1 nouveau
i2c_algo_bit 13065 1 nouveau drm,i2c_i801,tuner,saa7134_dvb,saa7134,drm_kms_helper,tda8290,tda9887,i2c_algo_bit,of_i2c,v4l2_common,tveeprom,nouveau,tuner_simple,tda1004x,videodev

La carte est supporté d'après :
http://www.linuxtv.org/wiki/index.php/ASUS_My_Cinema-P7131_Hybrid#Drivers

Kaffeine, scan, mais il ne fait apparaitre aucune chaine, et dans la configuration, j'ai qu'une seul periph, j'ai pas l'aquisition en RGB !

Une idée ?

Merci

Ptilou

Pikachu_2014

Nicosss wrote:Il te manque le firmware, il faut le trouver et l'installer.

Les pilotes de cette carte requièrent effectivement un firmware. Celui-ci est fourni par l'archive disponible à l'adresse suivante :
http://rehost.splurben.com/linux_dvb_firmware_v2.tar.bz2
Une fois l'archive téléchargée et décompressé, il faudra copier le fichier dvb-fe-tda10046.fw dans le dossier /lib/firmware.
Le plus simple est ensuite de redémarrer la machine pour recharger les pilotes avec ce firmware.

Nicosss

Pikachu_2014 wrote:
Nicosss wrote:Il te manque le firmware, il faut le trouver et l'installer.
Les pilotes de cette carte requièrent effectivement un firmware. Celui-ci est fourni par l'archive disponible à l'adresse suivante :
http://rehost.splurben.com/linux_dvb_firmware_v2.tar.bz2
Une fois l'archive téléchargée et décompressé, il faudra copier le fichier dvb-fe-tda10046.fw dans le dossier /lib/firmware.
Le plus simple est ensuite de redémarrer la machine pour recharger les pilotes avec ce firmware.

Il ne faut pas utiliser le 10048 désormais ?

ptilou

Bonjour,

J'ai toujours pas chaines télé, et j'ai aucune erreur, et j'ai installé les firmware ...

Que puis je faire ?

Merci

Ptilou

Nicosss

Si tu ne nous dis pas exactement ce que tu as fait et ce que les logs disent alors ça va être difficile de t'aider.

ptilou

Bonjour,

Je joins les fichier, mais je ne vois aucune erreur !

[device]
deviceId=P1131713410434860
frontendName=Philips TDA10046H DVB-T
configCount=0
Le deuxieme est le scan des chaine soit automatique, soi une reference d'une antenne, j'ai essayé Paris Sannois, Amiens et automatique rien ni fait ...
Extrait :
# this file is automatically generated from http://linuxtv.org/hg/dvb-apps
[date]
2011-09-08
[dvb-c/at-Innsbruck]
C 442000000 6875000 NONE QAM64
C 450000000 6875000 NONE QAM64
C 490000000 6875000 NONE QAM64
C 546000000 6875000 NONE QAM64
C 554000000 6875000 NONE QAM64
C 562000000 6875000 NONE QAM64
[dvb-c/at-Kabel-Braunau]
C 386000000 6900000 NONE QAM64
C 394000000 6875000 NONE QAM64
C 402000000 6875000 NONE QAM64
C 410000000 6875000 NONE QAM64
C 418000000 6875000 NONE QAM64
C 426000000 6875000 NONE QAM64
C 434000000 6875000 NONE QAM64
C 458000000 6875000 NONE QAM64
C 466000000 6900000 NONE QAM64
C 474000000 6900000 NONE QAM64
C 482000000 6111000 NONE QAM64
C 490000000 6111000 NONE QAM64
C 498000000 6875000 NONE QAM64
C 506000000 6111000 NONE QAM64
C 514000000 6111000 NONE QAM64
C 522000000 6428000 NONE QAM128
C 530000000 6428000 NONE QAM128
C 546000000 6875000 NONE QAM64
C 554000000 6875000 NONE QAM64
C 562000000 6875000 NONE QAM64
C 570000000 6111000 NONE QAM64
C 578000000 6900000 NONE QAM256
C 586000000 6900000 NONE QAM256
C 594000000 6875000 NONE QAM64
[dvb-c/at-Kabelsignal]

Merci

Ptilou