bonjour tout le monde

alors voila ce qui m'amene :

lors de l'utilisation normale ( je pense ) de mon pc sous fedora 18 j'ai quelque rares fois tout qui se bloque ...

c'est a dire que je nai plus la possibillte d'interagir avec mes differentes fenetres presentes et il n'y a plus que le curseur de la souris qui bouge et ce sans le moindre effet...

et quelques minutes plus tard mon bureau se recharge et mes fenetres se reinstallent a leurs place....

y aurait il un moyen d'analyser et de remedier a ce probleme..? merci d'avance
hum hum.. ok 26 vues et personne ne sait ce qu'il peut se passer...?
Disons que ton énoncé est un peu succinct pour savoir ce qui se passe...
Tu es sous gnome, kde ou autres ?
As-tu installé des extensions (ou des plasmoids si tu es sous kde) ?
d'accord...
donc je suis sous gnome 3.6...
et dans "extensions"..? c'est a dire ..? il est un peu debutant en linux le gars mais ne demande qu'a apprendre...
par extensions j’entendais applet du genre gnome-shell-extension (ou plasmoid pour kde), certaines ne fonctionnant pas sous F18...

Je suis personnellement sous KDE , et il y a dans mon home un fichier .xsession-errors, qui raconte pas mal de chose quand il y a un problème, mais je ne sais pas si ce fichier existe avec gnome...
oui j'ai gnome extensions....
he bien je vais aller jeter un oeil si je trouve ce fichier..
sinon il existe une ligne de commande qui peut faire apparaitre le probleme.?

edit : apparement non.....
Après un freeze, si tu peux taper ces commandes et nous poster le résultat ça pourrait aider:
dmesg
tail -n50 /var/log/messages
et dans la foulée (avant/après un freeze peu importe), pour en savoir plus sur le matériel:
lspci
lsmod
Et surtout, vu que c'est très long ces sorties de commandes, utilise bien la balise code lors de l'édition de ta réponse. Sinon c'est illisible (inutile).

Fedora 18 installée de base ou mise à jour depuis une autre Fedora? ça marchait à un moment ou ça a toujours fait ces freeze?
[    2.139853] usb 2-1.2: Manufacturer: Logitech
[    2.142172] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[    2.142297] hid-generic 0003:046D:C06C.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.215583] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[    2.302018] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6335
[    2.302030] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.302038] usb 2-1.4: Product: Mass Storage Device
[    2.302045] usb 2-1.4: Manufacturer: Generic
[    2.302051] usb 2-1.4: SerialNumber: 058F63356336
[    2.315997] RPC: Registered named UNIX socket transport module.
[    2.316000] RPC: Registered udp transport module.
[    2.316001] RPC: Registered tcp transport module.
[    2.316002] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.375546] usb 2-1.5: new high-speed USB device number 5 using ehci_hcd
[    2.386621] systemd-udevd[171]: starting version 197
[    2.396942] Initializing USB Mass Storage driver...
[    2.397102] scsi5 : usb-storage 1-1.2:1.0
[    2.397253] scsi6 : usb-storage 2-1.4:1.0
[    2.397312] usbcore: registered new interface driver usb-storage
[    2.397313] USB Mass Storage support registered.
[    2.483976] usb 2-1.5: New USB device found, idVendor=0939, idProduct=0b15
[    2.483990] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.483998] usb 2-1.5: Product: StorE HDD
[    2.484004] usb 2-1.5: Manufacturer: Toshiba
[    2.484011] usb 2-1.5: SerialNumber: 2010061807EB
[    2.486092] scsi7 : usb-storage 2-1.5:1.0
[    2.486654] usb 1-1.2: USB disconnect, device number 4
[    2.599600] sky2: driver version 1.30
[    2.599774] sky2 0000:06:00.0: Yukon-2 FE+ chip revision 0
[    2.600444] sky2 0000:06:00.0: irq 41 for MSI/MSI-X
[    2.601337] sky2 0000:06:00.0 eth0: addr e8:11:32:2d:6a:c7
[    2.608241] [drm] Initialized drm 1.1.0 20060810
[    2.630975] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    2.630980] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.630998] Console: switching to colour dummy device 80x25
[    2.631074] i915 0000:00:02.0: setting latency timer to 64
[    2.662775] systemd-udevd[222]: renamed network interface eth0 to p10p1
[    2.664302] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
[    2.665891] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    2.665900] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.665902] [drm] Driver supports precise vblank timestamp query.
[    2.665945] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.753228] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[    2.753238] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.753245] usb 1-1.2: Product: Android
[    2.753250] usb 1-1.2: Manufacturer: Android
[    2.753254] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[    2.754856] scsi8 : usb-storage 1-1.2:1.0
[    2.756235] fbcon: inteldrmfb (fb0) is primary device
[    3.398813] scsi 6:0:0:0: Direct-Access     Single   Flash Reader     1.00 PQ: 0 ANSI: 0
[    3.400499] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.470809] Console: switching to colour frame buffer device 170x48
[    3.477010] fb0: inteldrmfb frame buffer device
[    3.477012] drm: registered panic notifier
[    3.477657] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    3.481501] acpi device:0a: registered as cooling_device6
[    3.482245] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.482347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7
[    3.482515] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.494191] scsi 7:0:0:0: Direct-Access     Toshiba  StorE HDD        0000 PQ: 0 ANSI: 4
[    3.495537] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    3.496502] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.502877] sd 7:0:0:0: [sdc] Write Protect is off
[    3.502888] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00
[    3.509392] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.509473] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.523640] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.523734] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.559984]  sdc: sdc1
[    3.579272] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.579340] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.579389] sd 7:0:0:0: [sdc] Attached SCSI disk
[    3.707637] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.757176] scsi 8:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.758032] scsi 8:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.759146] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    3.759285] sd 8:0:0:1: Attached scsi generic sg5 type 0
[    3.765950] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[    3.766577] sd 8:0:0:1: [sde] Attached SCSI removable disk
[    4.079697] bio: create slab <bio-1> at 1
[    4.275771] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.482942] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.950296] systemd-journald[78]: Received SIGTERM
[    5.760064] type=1404 audit(1360523372.257:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    5.962851] SELinux: 2048 avtab hash slots, 94546 rules.
[    5.978883] SELinux: 2048 avtab hash slots, 94546 rules.
[    6.249498] SELinux:  9 users, 15 roles, 4363 types, 239 bools, 1 sens, 1024 cats
[    6.249503] SELinux:  83 classes, 94546 rules
[    6.254120] SELinux:  Completing initialization.
[    6.254124] SELinux:  Setting up existing superblocks.
[    6.254131] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.254136] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    6.254147] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    6.254151] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    6.254160] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.254228] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    6.255056] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    6.255060] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    6.255743] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    6.255752] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    6.255755] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    6.255780] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    6.255789] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    6.255798] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    6.255809] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.256211] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    6.256215] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256224] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256325] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256357] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256361] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256365] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256382] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256395] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256398] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256404] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256409] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[    6.256420] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    6.288524] type=1403 audit(1360523372.786:3): policy loaded auid=4294967295 ses=4294967295
[    6.317066] systemd[1]: Successfully loaded SELinux policy in 557ms 498us.
[    6.590300] systemd[1]: Relabelled /dev and /run in 27ms 462us.
[    8.346101] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    9.605608] systemd-udevd[410]: starting version 197
[    9.676019] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    9.676386] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    9.692132] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   10.654618] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   10.743958] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[   13.315998] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   13.992353] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   14.185991] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[   14.186121] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   14.186357] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[   14.186366] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   14.186571] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[   14.186580] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   14.186792] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[   14.187101] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.928061] tun: Universal TUN/TAP device driver, 1.6
[   15.928065] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   16.800950] samsung_laptop: detected SABI interface: SwSmi@
[   16.800954] samsung_laptop: Backlight controlled by ACPI video driver
[   16.992720] cfg80211: Calling CRDA to update world regulatory domain
[   17.271212] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   17.271364] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   17.715519] cfg80211: World regulatory domain updated:
[   17.715525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.715529] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.715532] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.715534] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.715537] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.715540] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.826378] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[   17.826387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826392] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826398] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826404] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826410] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.007878] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[   18.007888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.147104] iTCO_vendor_support: vendor-support=0
[   18.155271] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   18.155309] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   18.156242] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.733049] media: Linux media interface: v0.10
[   18.754639] Linux video capture interface: v2.00
[   19.209552] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   19.244867] ath: phy0: ASPM enabled: 0x42
[   19.244872] ath: EEPROM regdomain: 0x65
[   19.244873] ath: EEPROM indicates we should expect a direct regpair map
[   19.244876] ath: Country alpha2 being used: 00
[   19.244877] ath: Regpair used: 0x65
[   19.377192] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   19.377203] SELinux: initialized (dev sdc1, type ext4), uses xattr
[   19.394275] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[   19.397874] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[   19.398046] usbcore: registered new interface driver uvcvideo
[   19.398050] USB Video Class driver (1.1.1)
[   19.522288] ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x40038205
[   19.522294] ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
[   19.522298] ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x0
[   19.522301] ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000003
[   19.522304] ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x00000082
[   19.522307] ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
[   19.522310] ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x1
[   19.522313] ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
[   19.522316] ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
[   19.522383] ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.522387] ALSA sound/pci/hda/hda_auto_parser.c:322    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.522390] ALSA sound/pci/hda/hda_auto_parser.c:326    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   19.522393] ALSA sound/pci/hda/hda_auto_parser.c:327    mono: mono_out=0x0
[   19.522395] ALSA sound/pci/hda/hda_auto_parser.c:331    inputs:
[   19.522399] ALSA sound/pci/hda/hda_auto_parser.c:335      Mic=0x18
[   19.522403] ALSA sound/pci/hda/hda_auto_parser.c:335      Internal Mic=0x19
[   19.523626] ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x40038205 for NID 0x1d
[   19.523631] ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
[   19.605237] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   19.605492] Registered led device: ath9k-phy0
[   19.605499] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005060000, irq=16
[   21.566110] cfg80211: Calling CRDA for country: FR
[   21.567951] cfg80211: Regulatory domain changed to country: FR
[   21.567955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.567957] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567958] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567960] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567961] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   21.567962] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   21.686951] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   21.687202] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   21.687316] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   26.233265] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   26.233277] SELinux: initialized (dev dm-1, type ext4), uses xattr
[   28.129163] systemd-journald[421]: Received SIGUSR1
[   30.199262] Loading iSCSI transport class v2.0-870.
[   31.192192] iscsi: registered transport (tcp)
[   31.658251] iscsi: registered transport (iser)
[   31.855690] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   31.855694] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[   32.206201] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[   32.206254] iscsi: registered transport (cxgb3i)
[   32.261224] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[   32.261260] iscsi: registered transport (cxgb4i)
[   32.320752] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.14 (Sep 30, 2012)
[   32.679102] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
[   32.679162] iscsi: registered transport (bnx2i)
[   33.147933] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   33.214490] iscsi: registered transport (be2iscsi)
[   33.214495] In beiscsi_module_init, tt=ffffffffa0607000
[   33.481917] Ebtables v2.0 registered
[   35.562151] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   36.816643] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.831112] sky2 0000:06:00.0 p10p1: enabling interface
[   36.831578] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
[   37.099590] Bluetooth: Core ver 2.16
[   37.099760] NET: Registered protocol family 31
[   37.099762] Bluetooth: HCI device and connection manager initialized
[   37.099776] Bluetooth: HCI socket layer initialized
[   37.099779] Bluetooth: L2CAP socket layer initialized
[   37.099786] Bluetooth: SCO socket layer initialized
[   37.245835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.245839] Bluetooth: BNEP filters: protocol multicast
[   37.245851] Bluetooth: BNEP socket layer initialized
[   38.810250] wlan0: authenticate with f4:ca:e5:a5:e4:b0
[   38.823504] wlan0: send auth to f4:ca:e5:a5:e4:b0 (try 1/3)
[   38.828304] wlan0: authenticated
[   38.829288] wlan0: associate with f4:ca:e5:a5:e4:b0 (try 1/3)
[   38.833595] wlan0: RX AssocResp from f4:ca:e5:a5:e4:b0 (capab=0x411 status=0 aid=1)
[   38.833721] wlan0: associated
[   38.833736] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   39.953756] fuse init (API version 7.20)
[   39.985734] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[   40.208660] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   42.869255] cgroup: libvirtd (1419) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869259] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[   42.869313] cgroup: libvirtd (1419) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869346] cgroup: libvirtd (1419) created nested cgroup for controller "freezer" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869370] cgroup: libvirtd (1419) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   62.004828] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[  131.606414] Btrfs loaded
[  131.810714] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[  140.916698] Adding 8191996k swap on /dev/sda2.  Priority:-1 extents:1 across:8191996k 
[  185.712425] usb 1-1.2: USB disconnect, device number 5
[  253.050498] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
[  253.133834] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[  253.133845] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  253.133850] usb 1-1.2: Product: Android
[  253.133855] usb 1-1.2: Manufacturer: Android
[  253.133859] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[  253.138711] scsi9 : usb-storage 1-1.2:1.0
[  254.232009] scsi 9:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[  254.232502] scsi 9:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[  254.234201] sd 9:0:0:0: Attached scsi generic sg4 type 0
[  254.235498] sd 9:0:0:1: Attached scsi generic sg5 type 0
[  254.243066] sd 9:0:0:1: [sde] Attached SCSI removable disk
[  254.244919] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[  338.162460] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 1366.135585] usb 1-1.2: USB disconnect, device number 6
[ 1383.224222] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
[ 1383.310636] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[ 1383.310648] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1383.310656] usb 1-1.2: Product: Android
[ 1383.310662] usb 1-1.2: Manufacturer: Android
[ 1383.310668] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[ 1383.349454] scsi10 : usb-storage 1-1.2:1.0
[ 1384.350311] scsi 10:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[ 1384.350795] scsi 10:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[ 1384.352206] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 1384.354715] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 1384.357548] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 1384.359406] sd 10:0:0:1: [sde] Attached SCSI removable disk
[ 3635.298918] usb 1-1.2: USB disconnect, device number 7
[root@localhost ~]# tail -n50 /var/log/messagesdmesg
tail: impossible d'ouvrir « /var/log/messagesdmesg » en lecture: Aucun fichier ou dossier de ce type
[root@localhost ~]# tail -n50 /var/log/messages
Feb 10 20:28:19 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 20:28:19 localhost dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 20:31:33 localhost kernel: [ 1366.135585] usb 1-1.2: USB disconnect, device number 6
Feb 10 20:31:50 localhost kernel: [ 1383.224222] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
Feb 10 20:31:50 localhost kernel: [ 1383.310636] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
Feb 10 20:31:50 localhost kernel: [ 1383.310648] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
Feb 10 20:31:50 localhost kernel: [ 1383.310656] usb 1-1.2: Product: Android
Feb 10 20:31:50 localhost kernel: [ 1383.310662] usb 1-1.2: Manufacturer: Android
Feb 10 20:31:50 localhost kernel: [ 1383.310668] usb 1-1.2: SerialNumber: 0123456789ABCDEF
Feb 10 20:31:50 localhost kernel: [ 1383.349454] scsi10 : usb-storage 1-1.2:1.0
Feb 10 20:31:51 localhost kernel: [ 1384.350311] scsi 10:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
Feb 10 20:31:51 localhost kernel: [ 1384.350795] scsi 10:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
Feb 10 20:31:51 localhost kernel: [ 1384.352206] sd 10:0:0:0: Attached scsi generic sg4 type 0
Feb 10 20:31:51 localhost kernel: [ 1384.354715] sd 10:0:0:1: Attached scsi generic sg5 type 0
Feb 10 20:31:51 localhost kernel: [ 1384.357548] sd 10:0:0:0: [sdd] Attached SCSI removable disk
Feb 10 20:31:51 localhost kernel: [ 1384.359406] sd 10:0:0:1: [sde] Attached SCSI removable disk
Feb 10 20:37:22 localhost NetworkManager[804]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Feb 10 21:04:09 localhost dbus-daemon[740]: dbus[740]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.1" (uid=0 pid=729 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.21" (uid=1000 pid=1149 comm="gnome-session ")
Feb 10 21:04:09 localhost dbus[740]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.1" (uid=0 pid=729 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.21" (uid=1000 pid=1149 comm="gnome-session ")
Feb 10 21:04:20 localhost dbus-daemon[740]: dbus[740]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Feb 10 21:04:20 localhost dbus[740]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Feb 10 21:04:20 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 21:04:20 localhost dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 21:08:52 localhost dbus-daemon[740]: dbus[740]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Feb 10 21:08:52 localhost dbus[740]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Feb 10 21:08:52 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'net.reactivated.Fprint'
Feb 10 21:08:52 localhost dbus[740]: [system] Successfully activated service 'net.reactivated.Fprint'
Feb 10 21:08:52 localhost dbus-daemon[740]: dbus[740]: [system] Activating service name='org.freedesktop.realmd' (using servicehelper)
Feb 10 21:08:52 localhost dbus[740]: [system] Activating service name='org.freedesktop.realmd' (using servicehelper)
Feb 10 21:08:52 localhost dbus-daemon[740]: Launching FprintObject
Feb 10 21:08:52 localhost dbus-daemon[740]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Feb 10 21:08:52 localhost dbus-daemon[740]: ** Message: entering main loop
Feb 10 21:08:53 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'org.freedesktop.realmd'
Feb 10 21:08:53 localhost dbus[740]: [system] Successfully activated service 'org.freedesktop.realmd'
Feb 10 21:08:57 localhost dbus-daemon[740]: dbus[740]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.1" (uid=0 pid=729 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.21" (uid=1000 pid=1149 comm="gnome-session ")
Feb 10 21:08:57 localhost dbus[740]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.1" (uid=0 pid=729 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.21" (uid=1000 pid=1149 comm="gnome-session ")
Feb 10 21:09:22 localhost dbus-daemon[740]: ** Message: No devices in use, exit
Feb 10 21:09:24 localhost kernel: [ 3635.298918] usb 1-1.2: USB disconnect, device number 7
Feb 10 21:10:05 localhost dbus-daemon[740]: dbus[740]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Feb 10 21:10:05 localhost dbus[740]: [system] Activating service name='net.reactivated.Fprint' (using servicehelper)
Feb 10 21:10:05 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'net.reactivated.Fprint'
Feb 10 21:10:05 localhost dbus[740]: [system] Successfully activated service 'net.reactivated.Fprint'
Feb 10 21:10:05 localhost dbus-daemon[740]: Launching FprintObject
Feb 10 21:10:05 localhost dbus-daemon[740]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Feb 10 21:10:05 localhost dbus-daemon[740]: ** Message: entering main loop
Feb 10 21:10:22 localhost dbus-daemon[740]: dbus[740]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Feb 10 21:10:22 localhost dbus[740]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Feb 10 21:10:22 localhost dbus-daemon[740]: dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 21:10:22 localhost dbus[740]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Feb 10 21:10:35 localhost dbus-daemon[740]: ** Message: No devices in use, exit
[root@localhost ~]#
????

hum... j'ai surement fais n'imp... c'est ça..?
pour le
lscpi
lsmod
il me dit commande inconnue
modification avec code ok.. vais voir pour le reste
voila :
[root@localhost ~]# rpm -q kmod
kmod-12-1.fc18.x86_64
la aussi :
[root@localhost ~]# rpm -q pciutils
pciutils-3.1.10-2.fc18.x86_64
je regarde le dernier....
[root@localhost ~]# echo $PATH
/usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin

alors..? c'est grave docteur..?
Module                  Size  Used by
xfs                   820365  0 
btrfs                 756703  0 
libcrc32c              12604  1 btrfs
zlib_deflate           26653  1 btrfs
ebtable_nat            12808  0 
fuse                   78033  3 
ipt_MASQUERADE         12881  1 
nf_conntrack_netbios_ns    12666  0 
nf_conntrack_broadcast    12528  1 nf_conntrack_netbios_ns
ip6table_mangle        12701  1 
ip6t_REJECT            12940  2 
nf_conntrack_ipv6      18624  23 
nf_defrag_ipv6         18206  1 nf_conntrack_ipv6
bnep                   19702  2 
iptable_nat            13012  1 
bluetooth             319586  7 bnep
nf_nat_ipv4            13200  1 iptable_nat
nf_nat                 25642  3 ipt_MASQUERADE,nf_nat_ipv4,iptable_nat
iptable_mangle         12696  1 
nf_conntrack_ipv4      14809  20 
nf_defrag_ipv4         12674  1 nf_conntrack_ipv4
xt_conntrack           12761  42 
nf_conntrack           84256  9 nf_conntrack_netbios_ns,ipt_MASQUERADE,nf_nat,nf_nat_ipv4,xt_conntrack,nf_conntrack_broadcast,iptable_nat,nf_conntrack_ipv4,nf_conntrack_ipv6
ebtable_filter         12828  0 
ebtables               30758  2 ebtable_nat,ebtable_filter
ip6table_filter        12816  1 
be2iscsi               93412  0 
iscsi_boot_sysfs       15642  1 be2iscsi
ip6_tables             26943  2 ip6table_filter,ip6table_mangle
bnx2i                  54715  0 
cnic                   66882  1 bnx2i
uio                    19045  1 cnic
cxgb4i                 32880  0 
cxgb4                 113494  1 cxgb4i
cxgb3i                 32951  0 
cxgb3                 155602  1 cxgb3i
mdio                   13436  1 cxgb3
libcxgbi               56493  2 cxgb3i,cxgb4i
ib_iser                37806  0 
rdma_cm                42167  1 ib_iser
ib_addr                13786  1 rdma_cm
iw_cm                  18222  1 rdma_cm
ib_cm                  41726  1 rdma_cm
ib_sa                  32956  2 rdma_cm,ib_cm
ib_mad                 46341  2 ib_cm,ib_sa
ib_core                74065  6 rdma_cm,ib_cm,ib_sa,iw_cm,ib_mad,ib_iser
iscsi_tcp              18334  0 
libiscsi_tcp           24177  4 cxgb3i,cxgb4i,iscsi_tcp,libcxgbi
libiscsi               50543  8 libiscsi_tcp,bnx2i,cxgb3i,cxgb4i,be2iscsi,iscsi_tcp,ib_iser,libcxgbi
scsi_transport_iscsi    57491  8 bnx2i,be2iscsi,iscsi_tcp,ib_iser,libcxgbi,libiscsi
snd_hda_codec_hdmi     36749  1 
arc4                   12616  2 
snd_hda_codec_realtek    78233  1 
uvcvideo               80925  0 
videobuf2_vmalloc      12968  1 uvcvideo
videobuf2_memops       13391  1 videobuf2_vmalloc
snd_hda_intel          37938  5 
ath9k                 145314  0 
snd_hda_codec         131731  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              17651  1 snd_hda_codec
videobuf2_core         34281  1 uvcvideo
ath9k_common           13649  1 ath9k
videodev              120901  2 uvcvideo,videobuf2_core
media                  20445  2 uvcvideo,videodev
ath9k_hw              399416  2 ath9k_common,ath9k
ath                    23143  3 ath9k_common,ath9k,ath9k_hw
snd_seq                64878  0 
snd_seq_device         14137  1 snd_seq
snd_pcm                98005  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
iTCO_wdt               13481  0 
iTCO_vendor_support    13420  1 iTCO_wdt
i2c_i801               18135  0 
snd_page_alloc         18269  2 snd_pcm,snd_hda_intel
snd_timer              28691  2 snd_pcm,snd_seq
lpc_ich                17062  0 
snd                    79380  18 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device
mac80211              540054  1 ath9k
mfd_core               13183  1 lpc_ich
intel_ips              18364  0 
cfg80211              201717  3 ath,ath9k,mac80211
soundcore              14492  1 snd
vhost_net              33860  0 
samsung_laptop         14533  0 
tun                    22939  1 vhost_net
macvtap                18241  1 vhost_net
rfkill                 21737  6 cfg80211,samsung_laptop,bluetooth
joydev                 17378  0 
coretemp               13394  0 
macvlan                18732  1 macvtap
microcode              23449  0 
kvm_intel             132720  0 
kvm                   431794  1 kvm_intel
uinput                 17615  0 
binfmt_misc            17464  1 
i915                  567858  10 
i2c_algo_bit           13258  1 i915
drm_kms_helper         44759  1 i915
crc32c_intel           12902  1 
drm                   264190  6 i915,drm_kms_helper
sky2                   58244  0 
i2c_core               38354  6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
video                  18992  2 i915,samsung_laptop
usb_storage            60226  1 
sunrpc                255581  1 
[root@localhost ~]#
[root@localhost ~]# which lsmod
/sbin/lsmod
[    0.831606] VFS: Disk quotas dquot_6.5.2
[    0.831644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.831991] msgmni has been set to 7499
[    0.832047] SELinux:  Registering netfilter hooks
[    0.832663] alg: No test for stdrng (krng)
[    0.832671] NET: Registered protocol family 38
[    0.832676] Key type asymmetric registered
[    0.832677] Asymmetric key parser 'x509' registered
[    0.832712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.832741] io scheduler noop registered
[    0.832743] io scheduler deadline registered
[    0.832750] io scheduler cfq registered (default)
[    0.832996] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.833009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.833011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.833231] acpiphp: Slot [1] registered
[    0.833316] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.833317] vesafb: scrolling: redraw
[    0.833319] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.833683] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 3072k, total 3072k
[    0.833760] Console: switching to colour frame buffer device 128x48
[    0.958552] fb0: VESA VGA frame buffer device
[    0.958564] intel_idle: MWAIT substates: 0x1120
[    0.958565] intel_idle: v0.4 model 0x25
[    0.958566] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.959686] ACPI: AC Adapter [ADP1] (on-line)
[    0.959767] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.960010] ACPI: Lid Switch [LID0]
[    0.960048] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.960051] ACPI: Power Button [PWRB]
[    0.960079] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.960081] ACPI: Sleep Button [SLPB]
[    0.960134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.960136] ACPI: Power Button [PWRF]
[    0.960329] ACPI: Fan [FAN0] (off)
[    0.960356] ACPI: Fan [FAN1] (off)
[    0.960515] ACPI: Requesting acpi_cpufreq
[    0.966163] thermal LNXTHERM:00: registered as thermal_zone0
[    0.966166] ACPI: Thermal Zone [TZ00] (64 C)
[    0.966759] thermal LNXTHERM:01: registered as thermal_zone1
[    0.966761] ACPI: Thermal Zone [TZ01] (64 C)
[    0.966789] GHES: HEST is not enabled!
[    0.966867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.970383] Non-volatile memory driver v1.3
[    0.970385] Linux agpgart interface v0.103
[    0.970436] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.970533] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.971330] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.971484] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.972333] loop: module loaded
[    0.972396] ahci 0000:00:1f.2: version 3.0
[    0.972498] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.972549] ahci: SSS flag set, parallel bus scan disabled
[    0.972618] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    0.972623] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.972628] ahci 0000:00:1f.2: setting latency timer to 64
[    0.972937] ACPI: Battery Slot [BAT1] (battery present)
[    0.976452] scsi0 : ahci
[    0.976521] scsi1 : ahci
[    0.976575] scsi2 : ahci
[    0.976626] scsi3 : ahci
[    0.976678] scsi4 : ahci
[    0.976711] ata1: SATA max UDMA/133 abar m2048@0xfc905000 port 0xfc905100 irq 40
[    0.976714] ata2: SATA max UDMA/133 abar m2048@0xfc905000 port 0xfc905180 irq 40
[    0.976715] ata3: DUMMY
[    0.976716] ata4: DUMMY
[    0.976719] ata5: SATA max UDMA/133 abar m2048@0xfc905000 port 0xfc905300 irq 40
[    0.976786] libphy: Fixed MDIO Bus: probed
[    0.976838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.976867] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.976871] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.976910] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.976926] ehci_hcd 0000:00:1a.0: debug port 2
[    0.980912] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.980930] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfc906000
[    0.986113] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.986153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.986159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.986163] usb usb1: Product: EHCI Host Controller
[    0.986168] usb usb1: Manufacturer: Linux 3.7.6-201.fc18.x86_64 ehci_hcd
[    0.986172] usb usb1: SerialNumber: 0000:00:1a.0
[    0.986288] hub 1-0:1.0: USB hub found
[    0.986292] hub 1-0:1.0: 3 ports detected
[    0.986427] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.986431] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.986475] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.986489] ehci_hcd 0000:00:1d.0: debug port 2
[    0.990505] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.990521] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfc906400
[    0.996107] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.996136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.996141] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996146] usb usb2: Product: EHCI Host Controller
[    0.996150] usb usb2: Manufacturer: Linux 3.7.6-201.fc18.x86_64 ehci_hcd
[    0.996154] usb usb2: SerialNumber: 0000:00:1d.0
[    0.996253] hub 2-0:1.0: USB hub found
[    0.996256] hub 2-0:1.0: 3 ports detected
[    0.996365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.996372] uhci_hcd: USB Universal Host Controller Interface driver
[    0.996414] usbcore: registered new interface driver usbserial
[    0.996420] usbcore: registered new interface driver usbserial_generic
[    0.996426] usbserial: USB Serial support registered for generic
[    0.996457] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.999951] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.999955] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.000038] mousedev: PS/2 mouse device common for all mice
[    1.000286] rtc_cmos 00:07: RTC can wake from S4
[    1.000423] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.000454] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.000532] device-mapper: uevent: version 1.0.3
[    1.000604] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    1.000715] cpuidle: using governor ladder
[    1.000783] cpuidle: using governor menu
[    1.000914] EFI Variables Facility v0.08 2004-May-17
[    1.000988] usbcore: registered new interface driver usbhid
[    1.000989] usbhid: USB HID core driver
[    1.001012] drop_monitor: Initializing network drop monitor service
[    1.001112] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.001154] TCP: cubic registered
[    1.001157] Initializing XFRM netlink socket
[    1.001247] NET: Registered protocol family 10
[    1.001398] mip6: Mobile IPv6
[    1.001401] NET: Registered protocol family 17
[    1.001771] PM: Hibernation image not present or could not be loaded.
[    1.001772] Loading module verification certificates
[    1.002699] MODSIGN: Loaded cert 'Fedora kernel signing key: bcc488d9c2a068c9ee4b2b098dd548e5bb56e42d'
[    1.002709] registered taskstats version 1
[    1.003395]   Magic number: 1:358:192
[    1.003458] acpi device:1e: hash matches
[    1.003538] rtc_cmos 00:07: setting system clock to 2013-02-10 19:09:27 UTC (1360523367)
[    1.033426] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.283063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.288056] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.293181] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[    1.293189] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.303394] ata1.00: configured for UDMA/133
[    1.303719] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  2AC1 PQ: 0 ANSI: 5
[    1.303926] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.303974] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.304025] sd 0:0:0:0: [sda] Write Protect is off
[    1.304029] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.304054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.363157]  sda: sda1 sda2
[    1.363652] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.402701] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.402706] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.402973] hub 1-1:1.0: USB hub found
[    1.403198] hub 1-1:1.0: 6 ports detected
[    1.506891] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.608874] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.609237] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633J, SC01, max UDMA/100
[    1.609913] ata2.00: configured for UDMA/100
[    1.613206] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633J  SC01 PQ: 0 ANSI: 5
[    1.621358] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.621366] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.621909] hub 2-1:1.0: USB hub found
[    1.622101] hub 2-1:1.0: 8 ports detected
[    1.622609] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.622615] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.622847] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.623036] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.698040] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[    1.807828] usb 1-1.1: New USB device found, idVendor=1210, idProduct=25f4
[    1.807836] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.807842] usb 1-1.1: Product: USB 2.0 PC Camera
[    1.807846] usb 1-1.1: Manufacturer: Alcor Micro, Corp.
[    1.808702] tsc: Refined TSC clocksource calibration: 2526.999 MHz
[    1.808711] Switching to clocksource tsc
[    1.873475] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040215)
[    1.883813] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[    1.910240] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x14, 0x0c.
[    1.927659] ata5: SATA link down (SStatus 0 SControl 300)
[    1.931625] Freeing unused kernel memory: 1068k freed
[    1.931928] Write protecting the kernel read-only data: 12288k
[    1.943347] Freeing unused kernel memory: 1768k freed
[    1.952320] Freeing unused kernel memory: 1404k freed
[    1.973861] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[    1.973870] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    1.973875] usb 1-1.2: Product: Android
[    1.973880] usb 1-1.2: Manufacturer: Android
[    1.973884] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[    2.048724] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[    2.053645] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.053891] systemd[1]: Running in initial RAM disk.
[    2.054119] systemd[1]: No hostname configured.
[    2.054131] systemd[1]: Set hostname to <localhost>.
[    2.054354] systemd[1]: Initializing machine ID from random generator.
[    2.062884] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    2.077114] systemd[1]: Starting Encrypted Volumes.
[    2.077149] systemd[1]: Reached target Encrypted Volumes.
[    2.077282] systemd[1]: Starting udev Kernel Socket.
[    2.077349] systemd[1]: Listening on udev Kernel Socket.
[    2.077461] systemd[1]: Starting udev Control Socket.
[    2.077553] systemd[1]: Listening on udev Control Socket.
[    2.077577] systemd[1]: Starting Journal Socket.
[    2.077684] systemd[1]: Listening on Journal Socket.
[    2.077711] systemd[1]: Starting dracut cmdline hook...
[    2.094230] systemd[1]: Started Load Kernel Modules.
[    2.094269] systemd[1]: Starting Journal Service...
[    2.108840] systemd[1]: Started Journal Service.
[    2.109153] systemd[1]: Starting Sockets.
[    2.109184] systemd[1]: Reached target Sockets.
[    2.109208] systemd[1]: Starting Swap.
[    2.109229] systemd[1]: Reached target Swap.
[    2.109247] systemd[1]: Starting Local File Systems.
[    2.109267] systemd[1]: Reached target Local File Systems.
[    2.139841] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c06c
[    2.139847] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.139850] usb 2-1.2: Product: USB Optical Mouse
[    2.139853] usb 2-1.2: Manufacturer: Logitech
[    2.142172] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[    2.142297] hid-generic 0003:046D:C06C.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.215583] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[    2.302018] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6335
[    2.302030] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.302038] usb 2-1.4: Product: Mass Storage Device
[    2.302045] usb 2-1.4: Manufacturer: Generic
[    2.302051] usb 2-1.4: SerialNumber: 058F63356336
[    2.315997] RPC: Registered named UNIX socket transport module.
[    2.316000] RPC: Registered udp transport module.
[    2.316001] RPC: Registered tcp transport module.
[    2.316002] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.375546] usb 2-1.5: new high-speed USB device number 5 using ehci_hcd
[    2.386621] systemd-udevd[171]: starting version 197
[    2.396942] Initializing USB Mass Storage driver...
[    2.397102] scsi5 : usb-storage 1-1.2:1.0
[    2.397253] scsi6 : usb-storage 2-1.4:1.0
[    2.397312] usbcore: registered new interface driver usb-storage
[    2.397313] USB Mass Storage support registered.
[    2.483976] usb 2-1.5: New USB device found, idVendor=0939, idProduct=0b15
[    2.483990] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.483998] usb 2-1.5: Product: StorE HDD
[    2.484004] usb 2-1.5: Manufacturer: Toshiba
[    2.484011] usb 2-1.5: SerialNumber: 2010061807EB
[    2.486092] scsi7 : usb-storage 2-1.5:1.0
[    2.486654] usb 1-1.2: USB disconnect, device number 4
[    2.599600] sky2: driver version 1.30
[    2.599774] sky2 0000:06:00.0: Yukon-2 FE+ chip revision 0
[    2.600444] sky2 0000:06:00.0: irq 41 for MSI/MSI-X
[    2.601337] sky2 0000:06:00.0 eth0: addr e8:11:32:2d:6a:c7
[    2.608241] [drm] Initialized drm 1.1.0 20060810
[    2.630975] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    2.630980] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.630998] Console: switching to colour dummy device 80x25
[    2.631074] i915 0000:00:02.0: setting latency timer to 64
[    2.662775] systemd-udevd[222]: renamed network interface eth0 to p10p1
[    2.664302] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
[    2.665891] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    2.665900] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.665902] [drm] Driver supports precise vblank timestamp query.
[    2.665945] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.753228] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[    2.753238] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.753245] usb 1-1.2: Product: Android
[    2.753250] usb 1-1.2: Manufacturer: Android
[    2.753254] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[    2.754856] scsi8 : usb-storage 1-1.2:1.0
[    2.756235] fbcon: inteldrmfb (fb0) is primary device
[    3.398813] scsi 6:0:0:0: Direct-Access     Single   Flash Reader     1.00 PQ: 0 ANSI: 0
[    3.400499] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.470809] Console: switching to colour frame buffer device 170x48
[    3.477010] fb0: inteldrmfb frame buffer device
[    3.477012] drm: registered panic notifier
[    3.477657] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    3.481501] acpi device:0a: registered as cooling_device6
[    3.482245] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.482347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7
[    3.482515] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.494191] scsi 7:0:0:0: Direct-Access     Toshiba  StorE HDD        0000 PQ: 0 ANSI: 4
[    3.495537] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    3.496502] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.502877] sd 7:0:0:0: [sdc] Write Protect is off
[    3.502888] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00
[    3.509392] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.509473] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.523640] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.523734] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.559984]  sdc: sdc1
[    3.579272] sd 7:0:0:0: [sdc] No Caching mode page present
[    3.579340] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    3.579389] sd 7:0:0:0: [sdc] Attached SCSI disk
[    3.707637] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    3.757176] scsi 8:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.758032] scsi 8:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[    3.759146] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    3.759285] sd 8:0:0:1: Attached scsi generic sg5 type 0
[    3.765950] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[    3.766577] sd 8:0:0:1: [sde] Attached SCSI removable disk
[    4.079697] bio: create slab <bio-1> at 1
[    4.275771] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.482942] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    4.950296] systemd-journald[78]: Received SIGTERM
[    5.760064] type=1404 audit(1360523372.257:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    5.962851] SELinux: 2048 avtab hash slots, 94546 rules.
[    5.978883] SELinux: 2048 avtab hash slots, 94546 rules.
[    6.249498] SELinux:  9 users, 15 roles, 4363 types, 239 bools, 1 sens, 1024 cats
[    6.249503] SELinux:  83 classes, 94546 rules
[    6.254120] SELinux:  Completing initialization.
[    6.254124] SELinux:  Setting up existing superblocks.
[    6.254131] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.254136] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    6.254147] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    6.254151] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    6.254160] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.254228] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    6.255056] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    6.255060] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    6.255743] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    6.255752] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    6.255755] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    6.255780] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    6.255789] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    6.255798] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    6.255809] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    6.256211] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    6.256215] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256224] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256325] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    6.256357] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256361] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256365] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256382] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256389] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256395] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256398] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256404] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    6.256409] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[    6.256420] SELinux: initialized (dev dm-0, type ext4), uses xattr
[    6.288524] type=1403 audit(1360523372.786:3): policy loaded auid=4294967295 ses=4294967295
[    6.317066] systemd[1]: Successfully loaded SELinux policy in 557ms 498us.
[    6.590300] systemd[1]: Relabelled /dev and /run in 27ms 462us.
[    8.346101] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    9.605608] systemd-udevd[410]: starting version 197
[    9.676019] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    9.676386] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    9.692132] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   10.654618] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   10.743958] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[   13.315998] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   13.992353] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   14.185991] microcode: CPU0 updated to revision 0x3, date = 2011-09-01
[   14.186121] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   14.186357] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[   14.186366] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   14.186571] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[   14.186580] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   14.186792] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[   14.187101] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   15.928061] tun: Universal TUN/TAP device driver, 1.6
[   15.928065] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   16.800950] samsung_laptop: detected SABI interface: SwSmi@
[   16.800954] samsung_laptop: Backlight controlled by ACPI video driver
[   16.992720] cfg80211: Calling CRDA to update world regulatory domain
[   17.271212] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   17.271364] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   17.715519] cfg80211: World regulatory domain updated:
[   17.715525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.715529] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.715532] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.715534] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.715537] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.715540] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.826378] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[   17.826387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826392] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826398] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826404] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[   17.826408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.826410] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.007878] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[   18.007888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.147104] iTCO_vendor_support: vendor-support=0
[   18.155271] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   18.155309] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   18.156242] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.733049] media: Linux media interface: v0.10
[   18.754639] Linux video capture interface: v2.00
[   19.209552] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   19.244867] ath: phy0: ASPM enabled: 0x42
[   19.244872] ath: EEPROM regdomain: 0x65
[   19.244873] ath: EEPROM indicates we should expect a direct regpair map
[   19.244876] ath: Country alpha2 being used: 00
[   19.244877] ath: Regpair used: 0x65
[   19.377192] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   19.377203] SELinux: initialized (dev sdc1, type ext4), uses xattr
[   19.394275] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4)
[   19.397874] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[   19.398046] usbcore: registered new interface driver uvcvideo
[   19.398050] USB Video Class driver (1.1.1)
[   19.522288] ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x40038205
[   19.522294] ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
[   19.522298] ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x0
[   19.522301] ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000003
[   19.522304] ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x00000082
[   19.522307] ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
[   19.522310] ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x1
[   19.522313] ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
[   19.522316] ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
[   19.522383] ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   19.522387] ALSA sound/pci/hda/hda_auto_parser.c:322    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.522390] ALSA sound/pci/hda/hda_auto_parser.c:326    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   19.522393] ALSA sound/pci/hda/hda_auto_parser.c:327    mono: mono_out=0x0
[   19.522395] ALSA sound/pci/hda/hda_auto_parser.c:331    inputs:
[   19.522399] ALSA sound/pci/hda/hda_auto_parser.c:335      Mic=0x18
[   19.522403] ALSA sound/pci/hda/hda_auto_parser.c:335      Internal Mic=0x19
[   19.523626] ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x40038205 for NID 0x1d
[   19.523631] ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0x8205 CODEC_ID=10ec0269
[   19.605237] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   19.605492] Registered led device: ath9k-phy0
[   19.605499] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005060000, irq=16
[   21.566110] cfg80211: Calling CRDA for country: FR
[   21.567951] cfg80211: Regulatory domain changed to country: FR
[   21.567955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   21.567957] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567958] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567960] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   21.567961] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   21.567962] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[   21.686951] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   21.687202] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   21.687316] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   26.233265] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   26.233277] SELinux: initialized (dev dm-1, type ext4), uses xattr
[   28.129163] systemd-journald[421]: Received SIGUSR1
[   30.199262] Loading iSCSI transport class v2.0-870.
[   31.192192] iscsi: registered transport (tcp)
[   31.658251] iscsi: registered transport (iser)
[   31.855690] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   31.855694] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[   32.206201] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[   32.206254] iscsi: registered transport (cxgb3i)
[   32.261224] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[   32.261260] iscsi: registered transport (cxgb4i)
[   32.320752] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.14 (Sep 30, 2012)
[   32.679102] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
[   32.679162] iscsi: registered transport (bnx2i)
[   33.147933] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   33.214490] iscsi: registered transport (be2iscsi)
[   33.214495] In beiscsi_module_init, tt=ffffffffa0607000
[   33.481917] Ebtables v2.0 registered
[   35.562151] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   36.816643] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   36.831112] sky2 0000:06:00.0 p10p1: enabling interface
[   36.831578] IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
[   37.099590] Bluetooth: Core ver 2.16
[   37.099760] NET: Registered protocol family 31
[   37.099762] Bluetooth: HCI device and connection manager initialized
[   37.099776] Bluetooth: HCI socket layer initialized
[   37.099779] Bluetooth: L2CAP socket layer initialized
[   37.099786] Bluetooth: SCO socket layer initialized
[   37.245835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.245839] Bluetooth: BNEP filters: protocol multicast
[   37.245851] Bluetooth: BNEP socket layer initialized
[   38.810250] wlan0: authenticate with f4:ca:e5:a5:e4:b0
[   38.823504] wlan0: send auth to f4:ca:e5:a5:e4:b0 (try 1/3)
[   38.828304] wlan0: authenticated
[   38.829288] wlan0: associate with f4:ca:e5:a5:e4:b0 (try 1/3)
[   38.833595] wlan0: RX AssocResp from f4:ca:e5:a5:e4:b0 (capab=0x411 status=0 aid=1)
[   38.833721] wlan0: associated
[   38.833736] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   39.953756] fuse init (API version 7.20)
[   39.985734] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[   40.208660] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   42.869255] cgroup: libvirtd (1419) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869259] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[   42.869313] cgroup: libvirtd (1419) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869346] cgroup: libvirtd (1419) created nested cgroup for controller "freezer" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   42.869370] cgroup: libvirtd (1419) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   62.004828] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[  131.606414] Btrfs loaded
[  131.810714] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[  140.916698] Adding 8191996k swap on /dev/sda2.  Priority:-1 extents:1 across:8191996k 
[  185.712425] usb 1-1.2: USB disconnect, device number 5
[  253.050498] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
[  253.133834] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[  253.133845] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  253.133850] usb 1-1.2: Product: Android
[  253.133855] usb 1-1.2: Manufacturer: Android
[  253.133859] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[  253.138711] scsi9 : usb-storage 1-1.2:1.0
[  254.232009] scsi 9:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[  254.232502] scsi 9:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[  254.234201] sd 9:0:0:0: Attached scsi generic sg4 type 0
[  254.235498] sd 9:0:0:1: Attached scsi generic sg5 type 0
[  254.243066] sd 9:0:0:1: [sde] Attached SCSI removable disk
[  254.244919] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[  338.162460] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 1366.135585] usb 1-1.2: USB disconnect, device number 6
[ 1383.224222] usb 1-1.2: new high-speed USB device number 7 using ehci_hcd
[ 1383.310636] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685e
[ 1383.310648] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1383.310656] usb 1-1.2: Product: Android
[ 1383.310662] usb 1-1.2: Manufacturer: Android
[ 1383.310668] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[ 1383.349454] scsi10 : usb-storage 1-1.2:1.0
[ 1384.350311] scsi 10:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[ 1384.350795] scsi 10:0:0:1: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[ 1384.352206] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 1384.354715] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 1384.357548] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 1384.359406] sd 10:0:0:1: [sde] Attached SCSI removable disk
[ 3635.298918] usb 1-1.2: USB disconnect, device number 7
lspci a suivre mais il vient de freezer justement...