salut
theboogymaster je croit que j vais vous de rongez désolé
le type de mon clé 3G HUAWEI
des autres informations que j croit vont vous aidé
la sortie de la cmd uname -r
localhost.localdomain 3.6.9-2.fc17.i686 #1 SMP Tue Dec 4 14:22:00 UTC 2012 i686 i686 i386 GNU/Linux
mon probleme c que le systeme detecte la clé mais quand je vais le connecté voici le message
Echec de connexion l'activation de la connexion reseaux à echoué
Bon moi j'ai suivi un forum et j vais vous donné plus d'info qu'ils vont plus vous aidé
j'ai lancer la commande dmesg
[root@localhost azzouz]# dmesg
[ 744.659119] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 744.784235] usb 1-8: New USB device found, idVendor=12d1, idProduct=1446
[ 744.784247] usb 1-8: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 744.784255] usb 1-8: Product: HUAWEI Mobile
[ 744.784262] usb 1-8: Manufacturer: Huawei Technologies
[ 744.825083] scsi7 : usb-storage 1-8:1.0
[ 744.825662] scsi8 : usb-storage 1-8:1.1
[ 745.781665] usb 1-8: USB disconnect, device number 4
[ 749.674139] usb 1-8: new high-speed USB device number 5 using ehci_hcd
[ 749.798992] usb 1-8: New USB device found, idVendor=12d1, idProduct=1506
[ 749.799031] usb 1-8: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 749.799039] usb 1-8: Product: HUAWEI Mobile
[ 749.799054] usb 1-8: Manufacturer: Huawei Technologies
[ 749.840709] scsi9 : usb-storage 1-8:1.5
[ 749.841363] scsi10 : usb-storage 1-8:1.6
[ 750.016605] usbcore: registered new interface driver option
[ 750.016657] USB Serial support registered for GSM modem (1-port)
[ 750.016879] option 1-8:1.0: GSM modem (1-port) converter detected
[ 750.021204] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB0
[ 750.021594] option 1-8:1.3: GSM modem (1-port) converter detected
[ 750.021861] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB1
[ 750.021957] option 1-8:1.4: GSM modem (1-port) converter detected
[ 750.023079] usbcore: registered new interface driver cdc_wdm
[ 750.023723] usb 1-8: GSM modem (1-port) converter now attached to ttyUSB2
[ 750.040463] qmi_wwan 1-8:1.1: cdc-wdm0: USB WDM device
[ 750.041305] qmi_wwan 1-8:1.1: wwan0: register 'qmi_wwan' at usb-0000:00:13.5-8, WWAN/QMI device, 02:50:f3:00:00:00
[ 750.041782] usbcore: registered new interface driver qmi_wwan
[ 750.845232] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 750.848421] scsi 10:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
[ 750.853542] sr1: scsi-1 drive
[ 750.855444] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 750.855926] sr 9:0:0:0: Attached scsi generic sg3 type 5
[ 750.857179] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 750.861288] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 837.635297] PPP generic driver version 2.4.2
[ 837.810981] PPP BSD Compression module registered
[ 837.839289] PPP Deflate Compression module registered
la commande lsusb
[root@localhost azzouz]# lsusb
Bus 001 Device 002: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 003: ID 174f:6a31 Syntek Web Cam - Asus A8J, F3S, F5R, VX2S, V1S
Bus 001 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[root@localhost azzouz]# ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
[root@localhost azzouz]# wvdial
--> WvDial: Internet dialer version 1.61
--> Warning: section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
[root@localhost azzouz]# vi /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = AT+CPIN="0000"
Init3 = AT+CGDCONT=1,"IP","ebouygtel.com"
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
New PPPD = yes
Modem = /dev/ttyUSB2
Username = ''
Password = ''
APN = ebouygtel.com
Baud = 460800
Stupid Mode = 0
Auto DNS = on
Idle = 0
apré j'ai rlancer la commande wvdial
[root@localhost azzouz]# wvdial
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: AT+CPIN="0000"
AT+CPIN="0000"
^BOOT:14597420,0,0,0,99
--> Sending: ATQ0
ATQ0
--> Re-Sending: AT+CPIN="0000"
AT+CPIN="0000"
ERROR
--> Bad init string.
quand j'ai retirer mon clé
voici la sortie dela cmd dmesg
[ 4200.850232] usb 1-8: USB disconnect, device number 5
[ 4200.852605] option1 ttyUSB0: option_instat_callback: error -108
[ 4200.853350] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 4200.853397] option 1-8:1.0: device disconnected
[ 4200.853561] qmi_wwan 1-8:1.1: wwan0: unregister 'qmi_wwan' usb-0000:00:13.5-8, WWAN/QMI device
[ 4200.858916] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 4200.858963] option 1-8:1.3: device disconnected
[ 4200.859983] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 4200.860087] option 1-8:1.4: device disconnected
merci
EDIT: Avec les balises code, c'est plus joli 😉
