Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

motion (mouvement)

mabouca

🙂 J'ai installé le programme motion de surveillance pour détecter et capturer des images ou vidéos à partir de la webcam et pour les transférer sur un serveur distant.

ffmpeg et wput sont bien installés et les autres paramètres sont bons

J'ai copié le fichier motion.conf (qui fonctionne avec Ubuntu) et quand je lance le programme avec le Terminal, ça retourne
cette dernière ligne " [1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device "

 [mabouca@maca ~]$ motion
[0] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "despeckle"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "gap"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "max_mpeg_time"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_all"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_normal"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_motion"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ppm"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_cap_new"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_cap_motion"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "locate"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "jpeg_filename"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_port"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_quality"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_motion"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_maxrate"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_localhost"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_limit"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "control_port"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "control_localhost"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "control_html_output"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_image"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_snapshot"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_mpeg"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_timelapse"
[0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_query"
[0] [NTC] [ALL] motion_startup: Using default log level (NTC) (6)
[0] [NTC] [ALL] motion_startup: Motion 3.3.0 Started
[0] [NTC] [ALL] motion_startup: Logging to syslog
[0] [NTC] [ALL] motion_startup: Using default log type (ALL)
[0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
[0] [NTC] [ENC] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3488868 LIBAVFORMAT_BUILD 3481444
[0] [NTC] [ALL] main: Thread 1 is from /etc/motion/motion.conf
[0] [NTC] [ALL] main: Thread 1 is device: /dev/video0 input 8
[0] [NTC] [ALL] main: Stream port 0
[0] [NTC] [ALL] main: Waiting for threads to finish, pid: 6092
[1] [NTC] [ALL] motion_init: Thread 1 started
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1 items
[1] [ERR] [ALL] motion_init: Error capturing first image
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [NTC] [ALL] motion_loop: Video signal lost - Adding grey image
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
[1] [WRN] [ALL] motion_loop: Retrying until successful connection with camera
[1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input 8
[1] [NTC] [VID] v4l2_get_capability: 
------------------------
cap.driver: "uvcvideo"
cap.card: "CNF8140"
cap.bus_info: "usb-0000:00:1a.7-3"
cap.capabilities=0x04000001
------------------------
[1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
[1] [NTC] [VID] v4l2_get_capability: - STREAMING
[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1: 
[1] [NTC] [VID] vid_v4lx_start: Using V4L1
[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device
[1] [NTC] [VID] vid_close: Closing video device /dev/video0
^Ccc[1] [NTC] [ALL] motion_loop: Thread exiting
[0] [NTC] [ALL] main: Threads finished
[0] [NTC] [ALL] main: Motion terminating
[mabouca@maca ~]$ cc

Je pourrais tester avec curl à la place de wput mais ne suis pas sur.
Pour installer curl il faut faire? [yum install curl] ou autre chose?

madko

yum install curl

devrait installer curl, c'est la bonne commande.

Mais pourquoi cette piste?

[1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video device

Nicosss

D'après le message d'erreur

[1] [ERR] [VID] v4l2_select_input: Unable to query input 8. VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1:

tu devrais vérifier si l'info est bonne comme tu dis utiliser une webcam.

$ cat /etc/motion/motion.conf | grep input

mabouca

@madko, pourquoi cette piste? pour voir si c'est pas wput qui bloque le transfert des fichiers de captures.
curl ne fonctionne pas non plus

@Nicosss, retour de la commande [cat /etc/motion/motion.conf | grep input]

 cat /etc/motion/motion.conf | grep input
# The video input to be used (default: 8)
input 8
# Round Robin (multiple inputs on same video device name)
# Film (mpeg) file output, and deinterlacing of the video input
[mpedro@macabou ~]$ cat /etc/motion/motion.conf | grep input
# The video input to be used (default: 8)
input 8
# Round Robin (multiple inputs on same video device name)
# Film (mpeg) file output, and deinterlacing of the video input

Nicosss

Pour moi dans mon fichier de conf j'ai

# The video input to be used (default: -1)
input -1

Es-tu sûr que ton fichier de conf était pour la même version de motion ? Peut-être voir à repartir d'une conf propre de motion.

Sinon pour ma part j'utilise systemctl pour le démarrer/arrêter

# systemctl start motion.service

mabouca

Il peut y avoir une différence de version effectivement, mais je doute. J'y avais pas pensé, repartir avec le fichier .conf d'origine propre a motion. Je vais voir...

Sinon pour démarrer j'écris "motion" dans le Terminal et pour arrêter c'est un Ctrl/C