Sur mon macbook, j'ai processeur Dual Core 2 T7400...et je pensais que c'etait un processeur à double coeur, mais quand je fais un mpstat, je ne vois qu'un seul cpu. Quelqu'un sait il comment y faire qq chose ?
Ils sont listés dans gnome-system-monitor ?
je ne sais pas, enfin je ne crois pas...je n'ai qu'un courbe CPU dans cette appli
Dual Core signifiant 2 coeurs, à mon avis tu n'as pas lu le man mpstat

que renvoie mpstat -A ?
Linux 3.3.7-1.fc16.x86_64 (psicBook) 	30/05/2012 	_x86_64_	(1 CPU)

18:55:40     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
18:55:40     all   23,19    6,91    3,77    3,64    0,44    0,22    0,00    0,00   61,83
18:55:40       0   23,19    6,91    3,77    3,64    0,44    0,22    0,00    0,00   61,83

18:55:40     CPU    intr/s
18:55:40     all    749,33
18:55:40       0      0,00
Est ce qu'il y a moyen de savoir ce qu'est devenu le deuxième coeur : defectueux ?, inactif ? ou je ne sais quoi ?
Je ne pense pas que le souci relève de Fedora alors.

Mais tu peux tester avec un cd genre systemrescuecd
L'information importante c'est : 
cat /proc/cpuinfo
psic wrote:
Linux 3.3.7-1.fc16.x86_64 (psicBook) 	30/05/2012 	_x86_64_	(1 CPU)

18:55:40     CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest   %idle
18:55:40     all   23,19    6,91    3,77    3,64    0,44    0,22    0,00    0,00   61,83
18:55:40       0   23,19    6,91    3,77    3,64    0,44    0,22    0,00    0,00   61,83

18:55:40     CPU    intr/s
18:55:40     all    749,33
18:55:40       0      0,00
Bah si c'est bon tu as un processeur avec deux coeurs (all et 0).
Chez moi avec 4 j'ai all, 0, 1, 2, 3.
Refuznik wrote: Chez moi avec 4 j'ai all, 0, 1, 2, 3.
si on suit ton raisonnement, ça en ferait 5.

si tu as UNE ligne et all, tu as une ligne (all) qui regroupe la totalité des stats de tous les procs, et une ligne par processeur, ici, le processeur 0. On ne voit pas de second processeur.
en postant sur le forum anglais de fedora, on m'a dis que ça pourrait venir de smp, mais je ne sais pas trop comment ça marche, ni comment debugger ce genre de trucs
$ cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz
stepping	: 6
microcode	: 0xd1
cpu MHz		: 1833.337
cache size	: 4096 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 1
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc up arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dts tpr_shadow
bogomips	: 4322.47
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits
physical, 48 bits virtual
power management:
C'est clair le noyau ne voit qu'un coeur. Que le donne le dmesg ?
J'ai déjà vu un coeur mourir sans que ça gêne le processeur de fonctionner mais c’était instable...
$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.7-1.fc16.x86_64 (mockbuild@x86-11.phx2.fedoraproject.org) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #1 SMP Tue May 22 13:59:39 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.7-1.fc16.x86_64 root=UUID=53cf5d1d-e58a-4be0-97e9-a4143cbda413 ro rd.md=0 rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr nolapic LANG=fr_FR.UTF-8 i915.modeset=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003e0f6000 (usable)
[    0.000000]  BIOS-e820: 000000003e0f6000 - 000000003e2f7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003e2f7000 - 000000003eebe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Apple Inc. MacBook2,1/Mac-F4208CAA, BIOS     MB21.88Z.00A5.B07.0706270922 06/27/07
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x3e0f6 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask FC0000000 write-back
[    0.000000]   2 base 03F000000 mask FFF000000 uncachable
[    0.000000]   3 base 03EF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000003e0f6000
[    0.000000]  0000000000 - 003e000000 page 2M
[    0.000000]  003e000000 - 003e0f6000 page 4k
[    0.000000] kernel direct mapping tables up to 3e0f6000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 35e68000 - 36f2c000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 000000003eefd1c0 00074 (v01 APPLE   Apple00 000000A5      01000013)
[    0.000000] ACPI: FACP 000000003eefb000 000F4 (v03 APPLE   Apple00 000000A5 Loki 0000005F)
[    0.000000] ACPI: DSDT 000000003eef0000 041E4 (v01 APPLE   MacBook 00020001 INTL 20050309)
[    0.000000] ACPI: FACS 000000003eec0000 00040
[    0.000000] ACPI: HPET 000000003eefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 000000003eef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: MCFG 000000003eef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 000000003eef7000 000A0 (v32 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 000000003eef6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 000000003eef5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 000000003eeef000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
[    0.000000] ACPI: SSDT 000000003eebd000 0064F (v01 SataRe  SataPri 00001000 INTL 20050309)
[    0.000000] ACPI: SSDT 000000003eebc000 0069C (v01 SataRe  SataSec 00001000 INTL 20050309)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003e0f6000
[    0.000000] Initmem setup node 0 0000000000000000-000000003e0f6000
[    0.000000]   NODE_DATA [000000003e0e2000 - 000000003e0f5fff]
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003c800000-ffff88003d7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003e0f6
[    0.000000] On node 0 totalpages: 254085
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3908 pages used for memmap
[    0.000000]   DMA32 zone: 246194 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003de00000 s82688 r8192 d23808 u2097152
[    0.000000] pcpu-alloc: s82688 r8192 d23808 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 250108
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.7-1.fc16.x86_64 root=UUID=53cf5d1d-e58a-4be0-97e9-a4143cbda413 ro rd.md=0 rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=fr nolapic LANG=fr_FR.UTF-8 i915.modeset=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 966508k/1016792k available (6145k kernel code, 452k absent, 49832k reserved, 7013k data, 1000k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: Unable to calibrate against PIT
[    0.000000] TSC: using HPET reference calibration
[    0.000000] Detected 2161.237 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.47 BogoMIPS (lpj=2161237)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004045] Security Framework initialized
[    0.004061] SELinux:  Initializing.
[    0.004075] SELinux:  Starting in permissive mode
[    0.004275] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005199] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.005530] Mount-cache hash table entries: 256
[    0.005722] Initializing cgroup subsys cpuacct
[    0.005726] Initializing cgroup subsys memory
[    0.005744] Initializing cgroup subsys devices
[    0.005747] Initializing cgroup subsys freezer
[    0.005750] Initializing cgroup subsys net_cls
[    0.005752] Initializing cgroup subsys blkio
[    0.006011] Initializing cgroup subsys perf_event
[    0.006055] CPU: Physical Processor ID: 0
[    0.006057] CPU: Processor Core ID: 0
[    0.006060] mce: CPU supports 6 MCE banks
[    0.006072] using mwait in idle threads.
[    0.006112] SMP alternatives: switching to UP code
[    0.016213] Freeing SMP alternatives: 24k freed
[    0.016226] ACPI: Core revision 20120111
[    0.018695] ACPI: setting ELCR to 0200 (from 0c00)
[    0.018973] ftrace: allocating 22593 entries in 89 pages
[    0.026082] weird, boot CPU (#0) not listed by the BIOS.
[    0.026086] SMP motherboard not detected.
[    0.026089] Apic disabled
[    0.026091] Local APIC not detected. Using dummy APIC emulation.
[    0.026092] SMP disabled
[    0.026095] Performance Events: PEBS fmt0-, Core2 events, 
[    0.026101] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.026103] no hardware sampling interrupt available.
[    0.026106] Intel PMU driver.
[    0.026108] PEBS disabled due to CPU errata.
[    0.026112] ... version:                2
[    0.026113] ... bit width:              40
[    0.026115] ... generic registers:      2
[    0.026117] ... value mask:             000000ffffffffff
[    0.026119] ... max period:             000000007fffffff
[    0.026121] ... fixed-purpose events:   3
[    0.026123] ... event mask:             0000000700000003
[    0.026325] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[    0.026343] Brought up 1 CPUs
[    0.026345] Total of 1 processors activated (4322.47 BogoMIPS).
[    0.026530] devtmpfs: initialized
[    0.026692] PM: Registering ACPI NVS region at 3e0f6000 (2101248 bytes)
[    0.026742] PM: Registering ACPI NVS region at 3eebe000 (200704 bytes)
[    0.027762] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.027800] RTC time:  6:44:15, date: 05/31/12
[    0.027842] NET: Registered protocol family 16
[    0.028040] ACPI: bus type pci registered
[    0.028123] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[    0.028127] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[    0.028131] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[    0.039297] PCI: Using configuration type 1 for base access
[    0.040294] bio: create slab <bio-0> at 0
[    0.040374] ACPI: Added _OSI(Module Device)
[    0.040377] ACPI: Added _OSI(Processor Device)
[    0.040379] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.040382] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041180] ACPI: EC: EC description table is found, configuring boot EC
[    0.043028] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.043514] ACPI: Interpreter enabled
[    0.043519] ACPI: (supports S0 S3 S4 S5)
[    0.043542] ACPI: Using PIC for interrupt routing
[    0.052262] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.052399] ACPI: No dock devices found.
[    0.052404] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.052806] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.053384] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.053388] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.053391] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.053396] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.053399] PCI: root bus 00: using default resources
[    0.053435] PCI host bridge to bus 0000:00
[    0.053438] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.053441] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.053453] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[    0.053506] pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
[    0.053518] pci 0000:00:02.0: reg 10: [mem 0x50380000-0x503fffff]
[    0.053525] pci 0000:00:02.0: reg 14: [io  0x20e0-0x20e7]
[    0.053532] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[    0.053539] pci 0000:00:02.0: reg 1c: [mem 0x50400000-0x5043ffff]
[    0.053588] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[    0.053598] pci 0000:00:02.1: reg 10: [mem 0x50300000-0x5037ffff]
[    0.053664] pci 0000:00:07.0: [8086:27a3] type 0 class 0x001101
[    0.053675] pci 0000:00:07.0: reg 10: [mem 0x50444000-0x50444fff]
[    0.053768] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.053791] pci 0000:00:1b.0: reg 10: [mem 0x50440000-0x50443fff 64bit]
[    0.053895] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.053929] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.054051] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.054088] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.054197] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.054236] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.054293] pci 0000:00:1d.0: reg 20: [io  0x2080-0x209f]
[    0.054336] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.054393] pci 0000:00:1d.1: reg 20: [io  0x2060-0x207f]
[    0.054436] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.054493] pci 0000:00:1d.2: reg 20: [io  0x2040-0x205f]
[    0.054538] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.054595] pci 0000:00:1d.3: reg 20: [io  0x2020-0x203f]
[    0.054651] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.054675] pci 0000:00:1d.7: reg 10: [mem 0x50445400-0x504457ff]
[    0.054781] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.054809] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.054907] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.055038] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[    0.055043] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.055050] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[    0.055107] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.055124] pci 0000:00:1f.1: reg 10: [io  0x20d8-0x20df]
[    0.055136] pci 0000:00:1f.1: reg 14: [io  0x20f4-0x20f7]
[    0.055149] pci 0000:00:1f.1: reg 18: [io  0x20d0-0x20d7]
[    0.055161] pci 0000:00:1f.1: reg 1c: [io  0x20f0-0x20f3]
[    0.055173] pci 0000:00:1f.1: reg 20: [io  0x20b0-0x20bf]
[    0.055222] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[    0.055243] pci 0000:00:1f.2: reg 10: [io  0x20c8-0x20cf]
[    0.055255] pci 0000:00:1f.2: reg 14: [io  0x20ec-0x20ef]
[    0.055268] pci 0000:00:1f.2: reg 18: [io  0x20c0-0x20c7]
[    0.055280] pci 0000:00:1f.2: reg 1c: [io  0x20e8-0x20eb]
[    0.055292] pci 0000:00:1f.2: reg 20: [io  0x20a0-0x20af]
[    0.055304] pci 0000:00:1f.2: reg 24: [mem 0x50445000-0x504453ff]
[    0.055351] pci 0000:00:1f.2: PME# supported from D3hot
[    0.055372] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.055446] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.055585] pci 0000:01:00.0: [11ab:4362] type 0 class 0x000200
[    0.055616] pci 0000:01:00.0: reg 10: [mem 0x50200000-0x50203fff 64bit]
[    0.055633] pci 0000:01:00.0: reg 18: [io  0x1000-0x10ff]
[    0.055693] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.055787] pci 0000:01:00.0: supports D1 D2
[    0.055790] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.055813] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.055819] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.055824] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.055830] pci 0000:00:1c.0:   bridge window [mem 0x50200000-0x502fffff]
[    0.055925] pci 0000:02:00.0: [168c:0024] type 0 class 0x000280
[    0.055956] pci 0000:02:00.0: reg 10: [mem 0x50100000-0x5010ffff 64bit]
[    0.056127] pci 0000:02:00.0: supports D1
[    0.056130] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.056166] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.056172] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.056180] pci 0000:00:1c.1:   bridge window [mem 0x50100000-0x501fffff]
[    0.056237] pci 0000:03:03.0: [11c1:5811] type 0 class 0x000c00
[    0.056260] pci 0000:03:03.0: reg 10: [mem 0x50000000-0x50000fff]
[    0.056359] pci 0000:03:03.0: supports D1 D2
[    0.056361] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
[    0.056425] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.056433] pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x500fffff]
[    0.056442] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.056445] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.056468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.056633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.056689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.056755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.057053]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.057333]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.060762] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.060819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.060869] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.060918] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.060967] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.061031] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.061080] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.061129] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.061231] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.061239] vgaarb: loaded
[    0.061240] vgaarb: bridge control possible 0000:00:02.0
[    0.061328] SCSI subsystem initialized
[    0.061379] libata version 3.00 loaded.
[    0.061439] usbcore: registered new interface driver usbfs
[    0.061454] usbcore: registered new interface driver hub
[    0.061482] usbcore: registered new device driver usb
[    0.061547] PCI: Using ACPI for IRQ routing
[    0.064167] PCI: pci_cache_line_size set to 64 bytes
[    0.064248] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.064251] reserve RAM buffer: 000000003e0f6000 - 000000003fffffff 
[    0.064358] NetLabel: Initializing
[    0.064360] NetLabel:  domain hash size = 128
[    0.064362] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.064377] NetLabel:  unlabeled traffic allowed by default
[    0.064388] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.064395] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.064399] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.067030] Switching to clocksource hpet
[    0.076052] pnp: PnP ACPI init
[    0.076079] ACPI: bus type pnp registered
[    0.076443] pnp 00:00: [bus 00-ff]
[    0.076447] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.076449] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.076452] pnp 00:00: [io  0x0d00-0xffff window]
[    0.076455] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.076457] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.076460] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.076462] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.076465] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.076468] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.076470] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.076473] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.076475] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.076478] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.076480] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.076483] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.076485] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.076488] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.076490] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.076558] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.076571] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[    0.076573] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.076576] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.076578] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.076580] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.076583] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    0.076639] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.076643] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.076646] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.076649] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.076652] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.076655] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.076659] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.076834] pnp 00:02: [io  0x0300-0x031f]
[    0.076840] pnp 00:02: [irq 6]
[    0.076876] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[    0.076917] pnp 00:03: [io  0x0000-0x001f]
[    0.076920] pnp 00:03: [io  0x0081-0x0091]
[    0.076922] pnp 00:03: [io  0x0093-0x009f]
[    0.076924] pnp 00:03: [io  0x00c0-0x00df]
[    0.076927] pnp 00:03: [dma 4]
[    0.076960] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.076970] pnp 00:04: [mem 0xff000000-0xffffffff]
[    0.077027] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[    0.077103] pnp 00:05: [irq 0 disabled]
[    0.077106] pnp 00:05: [irq 8]
[    0.077108] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[    0.077158] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.077162] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.077175] pnp 00:06: [io  0x00f0]
[    0.077177] pnp 00:06: [irq 13]
[    0.077213] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.077239] pnp 00:07: [io  0x002e-0x002f]
[    0.077242] pnp 00:07: [io  0x004e-0x004f]
[    0.077244] pnp 00:07: [io  0x0061]
[    0.077246] pnp 00:07: [io  0x0063]
[    0.077249] pnp 00:07: [io  0x0065]
[    0.077251] pnp 00:07: [io  0x0067]
[    0.077253] pnp 00:07: [io  0x0070]
[    0.077255] pnp 00:07: [io  0x0080]
[    0.077257] pnp 00:07: [io  0x0092]
[    0.077259] pnp 00:07: [io  0x00b2-0x00b3]
[    0.077261] pnp 00:07: [io  0x0680-0x06ef]
[    0.077263] pnp 00:07: [io  0x0800-0x080f]
[    0.077265] pnp 00:07: [io  0x0810-0x0817]
[    0.077268] pnp 00:07: [io  0x0400-0x047f]
[    0.077270] pnp 00:07: [io  0x0500-0x053f]
[    0.077272] pnp 00:07: [io  0x1640-0x164f]
[    0.077281] pnp 00:07: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io  0x1000-0x1fff]
[    0.077335] system 00:07: [io  0x0680-0x06ef] has been reserved
[    0.077338] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.077341] system 00:07: [io  0x0810-0x0817] has been reserved
[    0.077344] system 00:07: [io  0x0400-0x047f] has been reserved
[    0.077347] system 00:07: [io  0x0500-0x053f] has been reserved
[    0.077351] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.077365] pnp 00:08: [io  0x0070-0x0077]
[    0.077402] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.081924] pnp: PnP ACPI: found 9 devices
[    0.081926] ACPI: ACPI bus type pnp unregistered
[    0.089826] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.089832] PCI: max bus depth: 1 pci_try_num: 2
[    0.089875] pci 0000:00:1c.0: BAR 15: assigned [mem 0x50500000-0x505fffff pref]
[    0.089880] pci 0000:00:1c.1: BAR 15: assigned [mem 0x50600000-0x507fffff 64bit pref]
[    0.089884] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.089889] pci 0000:00:1c.0: BAR 15: assigned [mem 0x50800000-0x50afffff pref]
[    0.089893] pci 0000:01:00.0: BAR 6: assigned [mem 0x50800000-0x5081ffff pref]
[    0.089896] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.089901] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.089908] pci 0000:00:1c.0:   bridge window [mem 0x50200000-0x502fffff]
[    0.089913] pci 0000:00:1c.0:   bridge window [mem 0x50800000-0x50afffff pref]
[    0.089922] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.089925] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.089932] pci 0000:00:1c.1:   bridge window [mem 0x50100000-0x501fffff]
[    0.089938] pci 0000:00:1c.1:   bridge window [mem 0x50600000-0x507fffff 64bit pref]
[    0.089946] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.089953] pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x500fffff]
[    0.090068] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.090071] PCI: setting IRQ 11 as level-triggered
[    0.090149] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    0.090151] PCI: setting IRQ 10 as level-triggered
[    0.090181] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.090185] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.090192] pci 0000:00:1e.0: setting latency timer to 64
[    0.090197] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.090200] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.090203] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.090206] pci_bus 0000:01: resource 1 [mem 0x50200000-0x502fffff]
[    0.090208] pci_bus 0000:01: resource 2 [mem 0x50800000-0x50afffff pref]
[    0.090211] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.090214] pci_bus 0000:02: resource 1 [mem 0x50100000-0x501fffff]
[    0.090217] pci_bus 0000:02: resource 2 [mem 0x50600000-0x507fffff 64bit pref]
[    0.090220] pci_bus 0000:03: resource 1 [mem 0x50000000-0x500fffff]
[    0.090223] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.090225] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
[    0.090266] NET: Registered protocol family 2
[    0.090345] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.090757] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.091986] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.092730] TCP: Hash tables configured (established 131072 bind 65536)
[    0.092735] TCP reno registered
[    0.092746] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.092763] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.092873] NET: Registered protocol family 1
[    0.092898] pci 0000:00:02.0: Boot video device
[    0.093061] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.093157] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.093255] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    0.093361] PCI: CLS mismatch (256 != 64), using 64 bytes
[    0.093434] Unpacking initramfs...
[    0.531815] Freeing initrd memory: 17168k freed
[    0.542067] Intel AES-NI instructions are not detected.
[    0.542258] audit: initializing netlink socket (disabled)
[    0.542278] type=2000 audit(1338446655.541:1): initialized
[    0.564701] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.566763] VFS: Disk quotas dquot_6.5.2
[    0.566812] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.567333] msgmni has been set to 1921
[    0.567392] SELinux:  Registering netfilter hooks
[    0.567804] alg: No test for stdrng (krng)
[    0.567809] NET: Registered protocol family 38
[    0.567854] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.567887] io scheduler noop registered
[    0.567889] io scheduler deadline registered
[    0.567951] io scheduler cfq registered (default)
[    0.568438] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.568441] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.568447] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.568462] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.568464] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.568470] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.568487] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.568538] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[    0.568561] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[    0.568575] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[    0.568594] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    0.568601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.568603] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.568892] intel_idle: MWAIT substates: 0x22220
[    0.568895] intel_idle: does not run on family 6 model 15
[    0.568980] ACPI: AC Adapter [ADP1] (on-line)
[    0.569113] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.569135] ACPI: Lid Switch [LID0]
[    0.569181] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.569186] ACPI: Power Button [PWRB]
[    0.569230] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.569233] ACPI: Sleep Button [SLPB]
[    0.569284] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.569288] ACPI: Power Button [PWRF]
[    0.573323] GHES: HEST is not enabled!
[    0.573460] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.574064] Non-volatile memory driver v1.3
[    0.574066] Linux agpgart interface v0.103
[    0.574108] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.574238] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.575092] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[    0.575227] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    0.576101] loop: module loaded
[    0.576198] ata_piix 0000:00:1f.1: version 2.13
[    0.576211] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.576214] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.576258] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.576749] scsi0 : ata_piix
[    0.576825] scsi1 : ata_piix
[    0.577236] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[    0.577240] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[    0.577263] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    0.647311] ACPI: Battery Slot [BAT0] (battery present)
[    0.728043] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.740098] ata1.00: ATAPI: HL-DT-ST DVDRW  GSA-S10N, BP08, max UDMA/33
[    0.740254] scsi2 : ata_piix
[    0.740315] scsi3 : ata_piix
[    0.740881] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 11
[    0.740885] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 11
[    0.740947] Fixed MDIO Bus: probed
[    0.741034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.741067] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.741072] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.741139] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.741164] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.741176] ehci_hcd 0000:00:1d.7: debug port 1
[    0.745071] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.745078] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x50445400
[    0.748275] ata1.00: configured for UDMA/33
[    0.751061] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.751084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.751087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.751090] usb usb1: Product: EHCI Host Controller
[    0.751092] usb usb1: Manufacturer: Linux 3.3.7-1.fc16.x86_64 ehci_hcd
[    0.751095] usb usb1: SerialNumber: 0000:00:1d.7
[    0.751304] hub 1-0:1.0: USB hub found
[    0.751309] hub 1-0:1.0: 8 ports detected
[    0.751396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.751408] uhci_hcd: USB Universal Host Controller Interface driver
[    0.751432] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.751436] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.751486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.751516] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002080
[    0.751554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.751558] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.751560] usb usb2: Product: UHCI Host Controller
[    0.751563] usb usb2: Manufacturer: Linux 3.3.7-1.fc16.x86_64 uhci_hcd
[    0.751565] usb usb2: SerialNumber: 0000:00:1d.0
[    0.751663] hub 2-0:1.0: USB hub found
[    0.751668] hub 2-0:1.0: 2 ports detected
[    0.751742] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.751746] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.751797] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.751828] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060
[    0.751864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.751867] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.751870] usb usb3: Product: UHCI Host Controller
[    0.751873] usb usb3: Manufacturer: Linux 3.3.7-1.fc16.x86_64 uhci_hcd
[    0.751875] usb usb3: SerialNumber: 0000:00:1d.1
[    0.751970] hub 3-0:1.0: USB hub found
[    0.751974] hub 3-0:1.0: 2 ports detected
[    0.752072] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.752076] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.752128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.752159] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002040
[    0.752202] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.752205] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.752208] usb usb4: Product: UHCI Host Controller
[    0.752210] usb usb4: Manufacturer: Linux 3.3.7-1.fc16.x86_64 uhci_hcd
[    0.752213] usb usb4: SerialNumber: 0000:00:1d.2
[    0.752308] hub 4-0:1.0: USB hub found
[    0.752312] hub 4-0:1.0: 2 ports detected
[    0.752384] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.752388] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.752432] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.752475] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRW  GSA-S10N  BP08 PQ: 0 ANSI: 5
[    0.752644] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00002020
[    0.752683] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.752686] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.752689] usb usb5: Product: UHCI Host Controller
[    0.752691] usb usb5: Manufacturer: Linux 3.3.7-1.fc16.x86_64 uhci_hcd
[    0.752694] usb usb5: SerialNumber: 0000:00:1d.3
[    0.752801] hub 5-0:1.0: USB hub found
[    0.752805] hub 5-0:1.0: 2 ports detected
[    0.752914] usbcore: registered new interface driver usbserial
[    0.752923] USB Serial support registered for generic
[    0.752935] usbcore: registered new interface driver usbserial_generic
[    0.752937] usbserial: USB Serial Driver core
[    0.752981] mousedev: PS/2 mouse device common for all mice
[    0.753199] rtc_cmos 00:08: RTC can wake from S4
[    0.753332] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    0.753359] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.753443] device-mapper: uevent: version 1.0.3
[    0.753519] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.753568] cpuidle: using governor ladder
[    0.753570] cpuidle: using governor menu
[    0.753783] EFI Variables Facility v0.08 2004-May-17
[    0.753904] usbcore: registered new interface driver usbhid
[    0.753906] usbhid: USB HID core driver
[    0.753977] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.754112] TCP cubic registered
[    0.754114] Initializing XFRM netlink socket
[    0.754248] NET: Registered protocol family 10
[    0.754423] Mobile IPv6
[    0.754426] NET: Registered protocol family 17
[    0.754442] Registering the dns_resolver key type
[    0.754565] PM: Hibernation image not present or could not be loaded.
[    0.754621] registered taskstats version 1
[    0.755205]   Magic number: 12:641:722
[    0.755219] block loop2: hash matches
[    0.755307] rtc_cmos 00:08: setting system clock to 2012-05-31 06:44:16 UTC (1338446656)
[    0.755329] p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
[    0.755353] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[    0.755359] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[    0.755410] Initializing network drop monitor service
[    0.756600] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    0.756603] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.756710] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.756860] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.918922] ata3.01: ATA-7: ST9120822AS, 3.CAE, max UDMA/133
[    0.918925] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.925355] ata3.01: configured for UDMA/133
[    0.925440] scsi 2:0:1:0: Direct-Access     ATA      ST9120822AS      3.CA PQ: 0 ANSI: 5
[    0.925588] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    0.925649] sd 2:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.925706] sd 2:0:1:0: [sda] Write Protect is off
[    0.925710] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    0.925734] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.989778]  sda: sda1 sda2 sda3
[    0.990091] sd 2:0:1:0: [sda] Attached SCSI disk
[    0.992091] Freeing unused kernel memory: 1000k freed
[    0.992436] Write protecting the kernel read-only data: 12288k
[    1.000795] Freeing unused kernel memory: 2028k freed
[    1.007744] Freeing unused kernel memory: 1512k freed
[    1.161051] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    1.165921] dracut: dracut-013-22.fc16
[    1.174734] dracut: rd.luks=0: removing cryptoluks activation
[    1.177332] dracut: rd.lvm=0: removing LVM activation
[    1.182439] udevd[95]: starting version 173
[    1.199425] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.199532] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.218675] [drm] Initialized drm 1.1.0 20060810
[    1.249069] i915 0000:00:02.0: setting latency timer to 64
[    1.326937] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.326940] [drm] Driver supports precise vblank timestamp query.
[    1.327032] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.544040] Refined TSC clocksource calibration: 2161.249 MHz.
[    1.544046] Switching to clocksource tsc
[    1.925730] [drm] initialized overlay support
[    1.925760] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[    1.926007] render error detected, EIR: 0x00000010
[    1.926007] page table error
[    1.926007]   PGTBL_ER: 0x00000102
[    1.926007] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[    1.926007] render error detected, EIR: 0x00000010
[    1.926007] page table error
[    1.926007]   PGTBL_ER: 0x00000102
[    2.113311] fbcon: inteldrmfb (fb0) is primary device
[    2.420417] Console: switching to colour frame buffer device 160x50
[    2.423676] fb0: inteldrmfb frame buffer device
[    2.423677] drm: registered panic notifier
[    2.423701] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.430788] dracut: Starting plymouth daemon
[    2.929697] dracut: rd.dm=0: removing DM RAID activation
[    2.938636] dracut: rd.md=0: removing MD RAID activation
[    3.196104] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    3.302404] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
[    3.302409] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.697112] firewire_core: created device fw0: GUID 001b63fffe69597c, S400
[    3.712028] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    3.864329] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.948955] dracut: Checking ext4: /dev/disk/by-uuid/53cf5d1d-e58a-4be0-97e9-a4143cbda413
[    3.949042] dracut: issuing e2fsck -a  /dev/disk/by-uuid/53cf5d1d-e58a-4be0-97e9-a4143cbda413
[    3.973676] usb 2-2: New USB device found, idVendor=05ac, idProduct=021b
[    3.973680] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.973684] usb 2-2: Product: Apple Internal Keyboard / Trackpad
[    3.973687] usb 2-2: Manufacturer: Apple Computer
[    3.999737] dracut: _Fedora-16-x86_6: clean, 120415/2244608 files, 1073113/8960000 blocks
[    3.999932] dracut: Remounting /dev/disk/by-uuid/53cf5d1d-e58a-4be0-97e9-a4143cbda413 with -o ro
[    4.053279] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[    4.053635] apple 0003:05AC:021B.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[    4.061668] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input6
[    4.061748] apple 0003:05AC:021B.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[    4.097714] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.099847] dracut: Mounted root filesystem /dev/sda1
[    4.268662] dracut: Switching root
[    4.318045] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    4.486074] usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
[    4.486078] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.486081] usb 4-2: Product: IR Receiver
[    4.486083] usb 4-2: Manufacturer: Apple Computer, Inc.
[    4.495160] generic-usb 0003:05AC:8240.0003: hiddev0,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    4.701028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    4.832899] type=1404 audit(1338446660.576:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    4.868083] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
[    4.868087] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.892413] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input7
[    4.892497] generic-usb 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[    4.926373] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input8
[    4.926479] generic-usb 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[    5.019262] SELinux: 2048 avtab hash slots, 98172 rules.
[    5.043564] SELinux: 2048 avtab hash slots, 98172 rules.
[    5.154859] SELinux:  9 users, 13 roles, 3948 types, 218 bools, 1 sens, 1024 cats
[    5.154864] SELinux:  82 classes, 98172 rules
[    5.160405] SELinux:  Completing initialization.
[    5.160409] SELinux:  Setting up existing superblocks.
[    5.160419] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    5.160425] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    5.160431] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    5.160437] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    5.160446] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.160470] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    5.161032] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    5.161037] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    5.161971] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    5.161979] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    5.161984] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    5.162022] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.162035] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    5.162043] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    5.162060] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    5.162069] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    5.162511] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.162517] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.164911] SELinux: initialized (dev sda1, type ext4), uses xattr
[    5.167202] type=1403 audit(1338446660.910:3): policy loaded auid=4294967295 ses=4294967295
[    5.183035] systemd[1]: Successfully loaded SELinux policy in 384ms 352us.
[    5.240048] systemd[1]: Successfully loaded SELinux database in 56ms 609us, size on heap is 483K.
[    5.277932] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.278373] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.336237] systemd[1]: Relabelled /dev and /run in 57ms 776us.
[    5.366079] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.366392] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.366789] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.367103] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.367388] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.367675] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.367981] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.368295] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.368348] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[    5.424583] systemd[1]: Set hostname to <psicBook>.
[    6.794237] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   18.842850] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[   18.843585] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[   18.845753] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   18.846436] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[   18.975421] EXT4-fs (sda1): re-mounted. Opts: (null)
[   19.076303] udevd[391]: starting version 173
[   19.482185] intel_rng: FWH not detected
[   19.513694] RPC: Registered named UNIX socket transport module.
[   19.513698] RPC: Registered udp transport module.
[   19.513699] RPC: Registered tcp transport module.
[   19.513701] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   19.514539] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[   19.535905] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
[   19.535914] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.596119] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[   19.630729] appletouch: Geyser mode initialized.
[   19.631336] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
[   19.631648] usbcore: registered new interface driver appletouch
[   19.883585] cfg80211: Calling CRDA to update world regulatory domain
[   19.932888] cfg80211: World regulatory domain updated:
[   19.932891] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   19.932895] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.932898] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.932901] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.932904] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.932907] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   19.998252] applesmc: key=226 fan=1 temp=10 acc=1 lux=0 kbd=0
[   20.029740] sky2: driver version 1.30
[   20.029827] sky2 0000:01:00.0: Yukon-2 EC chip revision 2
[   20.030154] sky2 0000:01:00.0: eth0: addr 00:1b:63:1f:8a:19
[   20.037253] iTCO_vendor_support: vendor-support=0
[   20.038133] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   20.038218] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[   20.039211] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.040523] leds_ss4200: no LED devices found
[   20.064305] input: applesmc as /devices/platform/applesmc.768/input/input10
[   20.085324] Unable to load isight firmware
[   20.085356] usbcore: registered new interface driver isight_firmware
[   20.087506] microcode: CPU0 updated to revision 0xd1, date = 2010-10-01
[   20.087888] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.321877] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
[   20.323526] ath: EEPROM regdomain: 0x37
[   20.323528] ath: EEPROM indicates we should expect a direct regpair map
[   20.323532] ath: Country alpha2 being used: AW
[   20.323533] ath: Regpair used: 0x37
[   20.346787] hda_codec: STAC922x, Apple subsys_id=106b2200
[   20.346863] ALSA sound/pci/hda/hda_codec.c:4927 autoconfig: line_outs=2 (0xc/0xd/0x0/0x0/0x0) type:speaker
[   20.346867] ALSA sound/pci/hda/hda_codec.c:4931    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.346890] ALSA sound/pci/hda/hda_codec.c:4935    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   20.346912] ALSA sound/pci/hda/hda_codec.c:4936    mono: mono_out=0x0
[   20.346914] ALSA sound/pci/hda/hda_codec.c:4939    dig-out=0x10/0x0
[   20.346917] ALSA sound/pci/hda/hda_codec.c:4940    inputs:
[   20.346919] ALSA sound/pci/hda/hda_codec.c:4944  Mic=0xb
[   20.346922] ALSA sound/pci/hda/hda_codec.c:4944  Line=0xf
[   20.346924] ALSA sound/pci/hda/hda_codec.c:4946 
[   20.346926] ALSA sound/pci/hda/hda_codec.c:4948    dig-in=0x11
[   20.347994] ALSA sound/pci/hda/patch_sigmatel.c:3090 stac92xx: dac_nids=2 (0x3/0x2/0x0/0x0/0x0)
[   20.352460] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   20.352856] cfg80211: Calling CRDA for country: AW
[   20.353647] Registered led device: ath9k-phy0
[   20.353654] ieee80211 phy0: Atheros AR5418 MAC/BB Rev:2 AR5133 RF Rev:81 mem=0xffffc90004560000, irq=11
[   20.385657] cfg80211: Regulatory domain changed to country: AW
[   20.385661] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.385664] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.385667] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.385670] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.385673] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   20.395340] input: HDA Intel SPDIF In as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   20.395563] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   20.395706] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   20.395844] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   20.465066] cfg80211: Calling CRDA for country: FR
[   20.525175] cfg80211: Regulatory domain changed to country: FR
[   20.525179] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   20.525182] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.525185] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.525188] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   20.525191] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   21.025543] fedora-storage-init[523]: Configuration du gestionnaire de volume logique\xffffffc2\xffffffa0\xffffffa0:    No volume groups found
[   21.031614] fedora-storage-init[523]: [  OK  ]
[   21.076981] Adding 2531324k swap on /dev/sda3.  Priority:0 extents:1 across:2531324k 
[   21.514311] fedora-storage-init[749]: Configuration du gestionnaire de volume logique\xffffffc2\xffffffa0\xffffffa0:    No volume groups found
[   21.520476] fedora-storage-init[749]: [  OK  ]
[   21.825902] lvm[759]: No volume groups found
[   21.909826] systemd-fsck[756]: /dev/sda2\xffffffc2\xffffffa0\xffffffa0: propre, 131941/9863168 fichiers, 9878555/19712000 blocs
[   22.094127] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[   22.129726] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   22.157151] SELinux: initialized (dev sda2, type ext3), uses xattr
[   22.197693] systemd-tmpfiles[770]: Successfully loaded SELinux database in 31ms 546us, size on heap is 485K.
[   22.768745] nf_conntrack version 0.5.0 (7720 buckets, 30880 max)
[   22.776048] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   23.007853] 8021q: 802.1Q VLAN Support v1.8
[   23.043293] sky2 0000:01:00.0: eth0: enabling interface
[   23.076692] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.178109] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.178134] netlink: 12 bytes leftover after parsing attributes.
[   23.178292] netlink: 12 bytes leftover after parsing attributes.
[   23.178630] netlink: 12 bytes leftover after parsing attributes.
[   23.374670] Loading iSCSI transport class v2.0-870.
[   23.383664] iscsi: registered transport (tcp)
[   23.441154] iscsi: registered transport (iser)
[   23.456627] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   23.456631] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[   23.458070] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[   23.458420] iscsi: registered transport (cxgb3i)
[   23.473084] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[   23.473447] iscsi: registered transport (cxgb4i)
[   23.482231] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.8 (Jan 3, 2012)
[   23.486519] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
[   23.486867] iscsi: registered transport (bnx2i)
[   23.499114] iscsi: registered transport (be2iscsi)
[   30.388363] wlan0: authenticate with 56:f6:a3:0d:2f:80 (try 1)
[   30.390321] wlan0: authenticated
[   30.393495] wlan0: associate with 56:f6:a3:0d:2f:80 (try 1)
[   30.395980] wlan0: RX AssocResp from 56:f6:a3:0d:2f:80 (capab=0x411 status=0 aid=3)
[   30.395983] wlan0: associated
[   30.395986] wlan0: moving STA 56:f6:a3:0d:2f:80 to state 1
[   30.395989] wlan0: moving STA 56:f6:a3:0d:2f:80 to state 2
[   30.396360] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   31.526023] wlan0: moving STA 56:f6:a3:0d:2f:80 to state 3
[   41.634015] wlan0: no IPv6 routers present
[  114.059958] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1853.382845] xfce4-power-man[1449]: segfault at 60 ip 0000003748a4b3c6 sp 00007fffa5cef000 error 4 in libc-2.14.90.so[3748a00000+1ad000]
[21802.658036] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[21802.821083] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[21802.821087] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[21802.821090] usb 3-1: Product: USB OPTICAL MOUSE
[21802.821093] usb 3-1: Manufacturer: PIXART
[21802.848405] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input15
[21802.848761] generic-usb 0003:093A:2510.0006: input,hidraw5: USB HID v1.10 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-1/input0
En rapport avec ce qui est annoncé sur le forum anglais il y a cela : 
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
On dirait bien qu'il bride à un CPU. Il faudrait trouver l'option de boot du noyau qui permet de désactiver ce SMP...

[edit] D'après https://www.kernel.org/doc/Documentation/kernel-parameters.txt
Essaye noapic, nosmp au démarrage du noyau peut corriger.
La commande la plus verbeuse est :
dmidecode -t processor
# dmidecode -t processor
# dmidecode 2.11
SMBIOS 2.4 present.

Handle 0x0116, DMI type 4, 35 bytes
Processor Information
	Socket Designation: U2E1
	Type: Central Processor
	Family: Unknown
	Manufacturer: Intel(R) Corporation
	ID: F6 06 00 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 15, Stepping 6
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM)2 CPU
	Voltage: 1.6 V
	External Clock: 166 MHz
	Max Speed: 2160 MHz
	Current Speed: 2160 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x0119
	L2 Cache Handle: 0x0117
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Unknown
	Part Number: Not Specified

Handle 0x011A, DMI type 4, 35 bytes
Processor Information
	Socket Designation: U2E1
	Type: Central Processor
	Family: Unknown
	Manufacturer: Intel(R) Corporation
	ID: F6 06 00 00 FF FB EB BF
	Signature: Type 0, Family 6, Model 15, Stepping 6
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		DS (Debug store)
		ACPI (ACPI supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		SS (Self-snoop)
		HTT (Multi-threading)
		TM (Thermal monitor supported)
		PBE (Pending break enabled)
	Version: Intel(R) Core(TM)2 CPU
	Voltage: 1.6 V
	External Clock: 166 MHz
	Max Speed: 2160 MHz
	Current Speed: 2160 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x011D
	L2 Cache Handle: 0x011B
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Unknown
	Part Number: Not Specified
7 jours plus tard
apparement y'a un trick à faire avec les options de boot de grub....mais acpi=off, noapic ne marche pas.. si quelqu'un s'y connait ?