Bonjour,

Je reviens vers vous car depuis déjà plusieurs versions de LO "officielle" > téléchargé depuis le site officiel donc.

J'ai de façon aléatoire des freezes du tableau de bord (j'utilise LXDE) su ma f15 à jour et cela se produit chaque fois quand j'utilise ou je viens de fermer LO. C'est assez désagréable car je suis obligé de redémarrer pour pouvoir réutiliser mon tableau de bord.

Après quelques recherches sur internet je n'ai rien trouvé trouvé de concluant.

Mais si je comprend bien quelques problèmes similaires sur d'autres logiciels cela pourrait être du a une "fuite de mémoire".

C'est pourquoi j'ai fait quelques tests :

Un top pendant le freeze donne :

[test@ltest ffmpeg]$ top

top - 04:15:02 up 46 min,  3 users,  load average: 1.15, 1.08, 0.98
Tasks: 154 total,   3 running, 151 sleeping,   0 stopped,   0 zombie
Cpu(s): 12.6%us,  0.0%sy,  0.0%ni, 87.3%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   6103060k total,  1045548k used,  5057512k free,    40588k buffers
Swap: 10239996k total,        0k used, 10239996k free,   568300k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                                          
 1477 test      20   0  304m  11m 8876 R 99.5  0.2  38:39.64 lxpanel                                                                                                                          
 1131 root      20   0  127m  25m  11m S  0.7  0.4   0:29.15 X                                                                                                                                
 1622 test      20   0  285m 9.9m 8112 S  0.3  0.2   0:05.77 lxtask                                                                                                                           
 6141 test      20   0 15128 1216  876 R  0.3  0.0   0:00.01 top                                                                                                                              
    1 root      20   0 37036 4516 1852 S  0.0  0.1   0:01.52 systemd                                                                                                                          
    2 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kthreadd                                                                                                                         
    3 root      20   0     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/0                                                                                                                      
    6 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0                                                                                                                      
    7 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/0                                                                                                                       
    8 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/1                                                                                                                      
   10 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/1                                                                                                                      
   12 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/1                                                                                                                       
   13 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/2                                                                                                                      
   15 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/2                                                                                                                      
   16 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/2                                                                                                                       
   17 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/3                                                                                                                      
   19 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/3                                                                                                                      
   20 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/3                                                                                                                       
   21 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/4                                                                                                                      
   23 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/4                                                                                                                      
   24 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/4                                                                                                                       
   25 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/5                                                                                                                      
   27 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/5                                                                                                                      
   28 root      RT   0     0    0    0 S  0.0  0.0   0:00.02 watchdog/5                                                                                                                       
   29 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/6                                                                                                                      
   31 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/6                                                                                                                      
   32 root      RT   0     0    0    0 S  0.0  0.0   0:00.03 watchdog/6                                                                                                                       
   33 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/7                                                                                                                      
   35 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/7                                                                                                                      
   36 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/7                                                                                                                       
   37 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 cpuset                                                                                                                           
   38 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 khelper                                                                                                                          
   39 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kdevtmpfs                                                                                                                        
   40 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 netns                                                                                                                            
   41 root      20   0     0    0    0 S  0.0  0.0   0:00.00 sync_supers                                                                                                                      
   42 root      20   0     0    0    0 S  0.0  0.0   0:00.00 bdi-default                                                                                                                      
   43 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kintegrityd                                                                                                                      
   44 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kblockd                                                                                                                          
   45 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 ata_sff                                                                                                                          
   46 root      20   0     0    0    0 S  0.0  0.0   0:00.00 khubd                                                                                                                            
   47 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 md                                                                                                                               
   48 root      20   0     0    0    0 S  0.0  0.0   0:00.34 kworker/1:1

Valgrind me donne ceci sur 2 fichiers différents :


[test@ltest ffmpeg]$ valgrind --leak-check=full libreoffice3.5 /home/test/eolas.odt
==5792== Memcheck, a memory error detector
==5792== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
==5792== Using Valgrind-3.6.1 and LibVEX; rerun with -h for copyright info
==5792== Command: /usr/bin/libreoffice3.5 /home/test/eolas.odt
==5792== 
==5793== 
==5793== HEAP SUMMARY:
==5793==     in use at exit: 24,782 bytes in 567 blocks
==5793==   total heap usage: 892 allocs, 325 frees, 48,543 bytes allocated
==5793== 
==5793== LEAK SUMMARY:
==5793==    definitely lost: 0 bytes in 0 blocks
==5793==    indirectly lost: 0 bytes in 0 blocks
==5793==      possibly lost: 0 bytes in 0 blocks
==5793==    still reachable: 24,782 bytes in 567 blocks
==5793==         suppressed: 0 bytes in 0 blocks
==5793== Reachable blocks (those to which a pointer was found) are not shown.
==5793== To see them, rerun with: --leak-check=full --show-reachable=yes
==5793== 
==5793== For counts of detected and suppressed errors, rerun with: -v
==5793== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5796== 
==5796== HEAP SUMMARY:
==5796==     in use at exit: 26,439 bytes in 635 blocks
==5796==   total heap usage: 1,125 allocs, 490 frees, 55,439 bytes allocated
==5796== 
==5796== LEAK SUMMARY:
==5796==    definitely lost: 0 bytes in 0 blocks
==5796==    indirectly lost: 0 bytes in 0 blocks
==5796==      possibly lost: 0 bytes in 0 blocks
==5796==    still reachable: 26,439 bytes in 635 blocks
==5796==         suppressed: 0 bytes in 0 blocks
==5796== Reachable blocks (those to which a pointer was found) are not shown.
==5796== To see them, rerun with: --leak-check=full --show-reachable=yes
==5796== 
==5796== For counts of detected and suppressed errors, rerun with: -v
==5796== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5800== 
==5800== HEAP SUMMARY:
==5800==     in use at exit: 25,530 bytes in 605 blocks
==5800==   total heap usage: 1,210 allocs, 605 frees, 58,303 bytes allocated
==5800== 
==5800== LEAK SUMMARY:
==5800==    definitely lost: 0 bytes in 0 blocks
==5800==    indirectly lost: 0 bytes in 0 blocks
==5800==      possibly lost: 0 bytes in 0 blocks
==5800==    still reachable: 25,530 bytes in 605 blocks
==5800==         suppressed: 0 bytes in 0 blocks
==5800== Reachable blocks (those to which a pointer was found) are not shown.
==5800== To see them, rerun with: --leak-check=full --show-reachable=yes
==5800== 
==5800== For counts of detected and suppressed errors, rerun with: -v
==5800== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5801== 
==5801== HEAP SUMMARY:
==5801==     in use at exit: 28,797 bytes in 776 blocks
==5801==   total heap usage: 2,083 allocs, 1,307 frees, 81,627 bytes allocated
==5801== 
==5801== 15 bytes in 1 blocks are definitely lost in loss record 106 of 310
==5801==    at 0x4A0649D: malloc (vg_replace_malloc.c:236)
==5801==    by 0x468972: xmalloc (in /bin/bash)
==5801==    by 0x430163: execute_command_internal (in /bin/bash)
==5801==    by 0x4338E5: ??? (in /bin/bash)
==5801==    by 0x434308: ??? (in /bin/bash)
==5801==    by 0x42FE02: execute_command_internal (in /bin/bash)
==5801==    by 0x433BDD: execute_command (in /bin/bash)
==5801==    by 0x4302F2: execute_command_internal (in /bin/bash)
==5801==    by 0x433BDD: execute_command (in /bin/bash)
==5801==    by 0x41DF60: reader_loop (in /bin/bash)
==5801==    by 0x41C79E: main (in /bin/bash)
==5801== 
==5801== LEAK SUMMARY:
==5801==    definitely lost: 15 bytes in 1 blocks
==5801==    indirectly lost: 0 bytes in 0 blocks
==5801==      possibly lost: 0 bytes in 0 blocks
==5801==    still reachable: 28,782 bytes in 775 blocks
==5801==         suppressed: 0 bytes in 0 blocks
==5801== Reachable blocks (those to which a pointer was found) are not shown.
==5801== To see them, rerun with: --leak-check=full --show-reachable=yes
==5801== 
==5801== For counts of detected and suppressed errors, rerun with: -v
==5801== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 6 from 6)

TEST DEUX :

[test@ltest ffmpeg]$ valgrind --leak-check=full libreoffice3.5 /home/test/admis3.odt
==5903== Memcheck, a memory error detector
==5903== Copyright (C) 2002-2010, and GNU GPL'd, by Julian Seward et al.
==5903== Using Valgrind-3.6.1 and LibVEX; rerun with -h for copyright info
==5903== Command: /usr/bin/libreoffice3.5 /home/test/admis3.odt
==5903== 
==5904== 
==5904== HEAP SUMMARY:
==5904==     in use at exit: 24,784 bytes in 567 blocks
==5904==   total heap usage: 892 allocs, 325 frees, 48,546 bytes allocated
==5904== 
==5904== LEAK SUMMARY:
==5904==    definitely lost: 0 bytes in 0 blocks
==5904==    indirectly lost: 0 bytes in 0 blocks
==5904==      possibly lost: 0 bytes in 0 blocks
==5904==    still reachable: 24,784 bytes in 567 blocks
==5904==         suppressed: 0 bytes in 0 blocks
==5904== Reachable blocks (those to which a pointer was found) are not shown.
==5904== To see them, rerun with: --leak-check=full --show-reachable=yes
==5904== 
==5904== For counts of detected and suppressed errors, rerun with: -v
==5904== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5907== 
==5907== HEAP SUMMARY:
==5907==     in use at exit: 26,441 bytes in 635 blocks
==5907==   total heap usage: 1,125 allocs, 490 frees, 55,442 bytes allocated
==5907== 
==5907== LEAK SUMMARY:
==5907==    definitely lost: 0 bytes in 0 blocks
==5907==    indirectly lost: 0 bytes in 0 blocks
==5907==      possibly lost: 0 bytes in 0 blocks
==5907==    still reachable: 26,441 bytes in 635 blocks
==5907==         suppressed: 0 bytes in 0 blocks
==5907== Reachable blocks (those to which a pointer was found) are not shown.
==5907== To see them, rerun with: --leak-check=full --show-reachable=yes
==5907== 
==5907== For counts of detected and suppressed errors, rerun with: -v
==5907== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5911== 
==5911== HEAP SUMMARY:
==5911==     in use at exit: 25,532 bytes in 605 blocks
==5911==   total heap usage: 1,210 allocs, 605 frees, 58,306 bytes allocated
==5911== 
==5911== LEAK SUMMARY:
==5911==    definitely lost: 0 bytes in 0 blocks
==5911==    indirectly lost: 0 bytes in 0 blocks
==5911==      possibly lost: 0 bytes in 0 blocks
==5911==    still reachable: 25,532 bytes in 605 blocks
==5911==         suppressed: 0 bytes in 0 blocks
==5911== Reachable blocks (those to which a pointer was found) are not shown.
==5911== To see them, rerun with: --leak-check=full --show-reachable=yes
==5911== 
==5911== For counts of detected and suppressed errors, rerun with: -v
==5911== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 6 from 6)
==5912== 
==5912== HEAP SUMMARY:
==5912==     in use at exit: 28,800 bytes in 776 blocks
==5912==   total heap usage: 2,083 allocs, 1,307 frees, 81,654 bytes allocated
==5912== 
==5912== 15 bytes in 1 blocks are definitely lost in loss record 106 of 310
==5912==    at 0x4A0649D: malloc (vg_replace_malloc.c:236)
==5912==    by 0x468972: xmalloc (in /bin/bash)
==5912==    by 0x430163: execute_command_internal (in /bin/bash)
==5912==    by 0x4338E5: ??? (in /bin/bash)
==5912==    by 0x434308: ??? (in /bin/bash)
==5912==    by 0x42FE02: execute_command_internal (in /bin/bash)
==5912==    by 0x433BDD: execute_command (in /bin/bash)
==5912==    by 0x4302F2: execute_command_internal (in /bin/bash)
==5912==    by 0x433BDD: execute_command (in /bin/bash)
==5912==    by 0x41DF60: reader_loop (in /bin/bash)
==5912==    by 0x41C79E: main (in /bin/bash)
==5912== 
==5912== LEAK SUMMARY:
==5912==    definitely lost: 15 bytes in 1 blocks
==5912==    indirectly lost: 0 bytes in 0 blocks
==5912==      possibly lost: 0 bytes in 0 blocks
==5912==    still reachable: 28,785 bytes in 775 blocks
==5912==         suppressed: 0 bytes in 0 blocks
==5912== Reachable blocks (those to which a pointer was found) are not shown.
==5912== To see them, rerun with: --leak-check=full --show-reachable=yes
==5912== 
==5912== For counts of detected and suppressed errors, rerun with: -v
==5912== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 6 from 6)
[test@ltest ffmpeg]$ 

Et voici aussi mon fichier /var/log/Xorg.0.log au cas ou cela soit du au driver nvidia ...

[test@ltest ffmpeg]$  cat /var/log/Xorg.0.log 
use: X [:<display>] [option]
-a #                   default pointer acceleration (factor)
-ac                    disable access control restrictions
-audit int             set audit trail level
-auth file             select authorization file
-br                    create root window with black background
+bs                    enable any backing store support
-bs                    disable any backing store support
-c                     turns off key-click
c #                    key-click volume (0-100)
-cc int                default color visual class
-nocursor              disable the cursor
-core                  generate core dump on fatal error
-dpi int               screen resolution in dots per inch
-dpms                  disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f #                   bell base (0-100)
-fc string             cursor font
-fn string             default font name
-fp string             default font path
-help                  prints message with these options
-I                     ignore all remaining arguments
-ld int                limit data space to N Kb
-lf int                limit number of open files to N
-ls int                limit stack space to N Kb
-nolock                disable the locking mechanism
-nolisten string       don't listen on protocol
-noreset               don't reset after last client exists
-background [none]     create root window with no background
-reset                 reset after last client exists
-p #                   screen-saver pattern duration (minutes)
-pn                    accept failure to listen on all ports
-nopn                  reject failure to listen on all ports
-r                     turns off auto-repeat
r                      turns on auto-repeat 
-render [default|mono|gray|color] set render color alloc policy
-retro                 start with classic stipple and cursor
-s #                   screen-saver timeout (minutes)
-t #                   default pointer threshold (pixels/t)
-terminate             terminate at server reset
-to #                  connection time out
-tst                   disable testing extensions
ttyxx                  server started from init on /dev/ttyxx
v                      video blanking for screen-saver
-v                     screen-saver without video blanking
-wm                    WhenMapped default backing-store
-wr                    create root window with white background
-maxbigreqsize         set maximal bigrequest size 
+xinerama              Enable XINERAMA extension
-xinerama              Disable XINERAMA extension
-dumbSched             Disable smart scheduling, enable old behavior
-schedInterval int     Set scheduler interval in msec
-sigstop               Enable SIGSTOP based startup
+extension name        Enable extension
-extension name        Disable extension
-query host-name       contact named host for XDMCP
-broadcast             broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name    contact named host for indirect XDMCP
-port port-num         UDP port number to send messages to
-from local-address    specify the local address to connect from
-once                  Terminate server after one session
-class display-class   specify display class to send in manage
-cookie xdm-auth-bits  specify the magic cookie for XDMCP
-displayID display-id  manufacturer display ID for request
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
                       enable/disable accessx key sequences
-ardelay               set XKB autorepeat delay
-arinterval            set XKB autorepeat interval


Device Dependent Usage
-modulepath paths      specify the module search path
-logfile file          specify a log file name
-configure             probe for devices and write an xorg.conf
-showopts              print available options for all installed drivers
-config file           specify a configuration file, relative to the
                       xorg.conf search path, only root can use absolute
-configdir dir         specify a configuration directory, relative to the
                       xorg.conf.d search path, only root can use absolute
-verbose [n]           verbose startup messages
-logverbose [n]        verbose log messages
-quiet                 minimal startup messages
-pixmap24              use 24bpp pixmaps for depth 24
-pixmap32              use 32bpp pixmaps for depth 24
-fbbpp n               set bpp for the framebuffer. Default: 8
-depth n               set colour depth. Default: 8
-gamma f               set gamma value (0.1 < f < 10.0) Default: 1.0
-rgamma f              set gamma value for red phase
-ggamma f              set gamma value for green phase
-bgamma f              set gamma value for blue phase
-weight nnn            set RGB weighting at 16 bpp.  Default: 565
-layout name           specify the ServerLayout section name
-screen name           specify the Screen section name
-keyboard name         specify the core keyboard InputDevice name
-pointer name          specify the core pointer InputDevice name
-nosilk                disable Silken Mouse
-flipPixels            swap default black/white Pixel values
-disableVidMode        disable mode adjustments with xvidtune
-allowNonLocalXvidtune allow xvidtune to be run as a non-local client
-allowMouseOpenFail    start server even if the mouse can't be initialized
-ignoreABI             make module ABI mismatches non-fatal
-isolateDevice bus_id  restrict device resets to bus_id (PCI only)
-version               show the server version
-showDefaultModulePath show the server default module path
-showDefaultLibPath    show the server default library path
vtXX                   use the specified VT number
-keeptty               don't detach controlling tty (for debugging only)
-novtswitch            don't immediately switch to new VT
-sharevts              share VTs with another X server

[    20.794] 
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    20.794] X Protocol Version 11, Revision 0
[    20.794] Build Operating System: x86-02 2.6.32-131.2.1.el6.x86_64 
[    20.794] Current Operating System: Linux ltest 2.6.42.9-2.fc15.x86_64 #1 SMP Mon Mar 5 20:55:32 UTC 2012 x86_64
[    20.795] Kernel command line: ro root=UUID=eae702aa-ff91-42f9-b27f-f1b62f8aaa55 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr-latin9 nomodeset rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
[    20.795] Build Date: 07 September 2011  04:14:13PM
[    20.795] Build ID: xorg-x11-server 1.10.4-1.fc15 
[    20.795] Current version of pixman: 0.20.2
[    20.795] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.795] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.795] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 26 04:21:07 2012
[    20.795] (==) Using config file: "/etc/X11/xorg.conf"
[    20.795] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.795] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.796] (==) ServerLayout "Default Layout"
[    20.796] (**) |-->Screen "Default Screen" (0)
[    20.796] (**) |   |-->Monitor "<default monitor>"
[    20.796] (**) |   |-->Device "Videocard0"
[    20.796] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[    20.796] (**) |-->Input Device "Keyboard0"
[    20.796] (**) |-->Input Device "Mouse0"
[    20.796] (==) Automatically adding devices
[    20.796] (==) Automatically enabling devices
[    20.796] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    20.796] (**) ModulePath set to "/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules"
[    20.796] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    20.796] (WW) Disabling Keyboard0
[    20.796] (WW) Disabling Mouse0
[    20.796] (II) Loader magic: 0x7d3cc0
[    20.796] (II) Module ABI versions:
[    20.796] 	X.Org ANSI C Emulation: 0.4
[    20.796] 	X.Org Video Driver: 10.0
[    20.796] 	X.Org XInput driver : 12.2
[    20.796] 	X.Org Server Extension : 5.0
[    20.798] (--) PCI:*(0:2:0:0) 10de:060f:1558:8687 rev 162, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/131072
[    20.798] (II) LoadModule: "extmod"
[    20.798] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    20.799] (II) Module extmod: vendor="X.Org Foundation"
[    20.799] 	compiled for 1.10.4, module version = 1.0.0
[    20.799] 	Module class: X.Org Server Extension
[    20.799] 	ABI class: X.Org Server Extension, version 5.0
[    20.799] (II) Loading extension SELinux
[    20.799] (II) Loading extension MIT-SCREEN-SAVER
[    20.799] (II) Loading extension XFree86-VidModeExtension
[    20.799] (II) Loading extension XFree86-DGA
[    20.799] (II) Loading extension DPMS
[    20.799] (II) Loading extension XVideo
[    20.799] (II) Loading extension XVideo-MotionCompensation
[    20.799] (II) Loading extension X-Resource
[    20.799] (II) LoadModule: "dbe"
[    20.799] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    20.799] (II) Module dbe: vendor="X.Org Foundation"
[    20.799] 	compiled for 1.10.4, module version = 1.0.0
[    20.799] 	Module class: X.Org Server Extension
[    20.799] 	ABI class: X.Org Server Extension, version 5.0
[    20.799] (II) Loading extension DOUBLE-BUFFER
[    20.799] (II) LoadModule: "glx"
[    20.799] (II) Loading /usr/lib64/xorg/modules/extensions/nvidia/libglx.so
[    20.941] (II) Module glx: vendor="NVIDIA Corporation"
[    20.941] 	compiled for 4.0.2, module version = 1.0.0
[    20.941] 	Module class: X.Org Server Extension
[    20.941] (II) NVIDIA GLX Module  280.13  Wed Jul 27 17:12:07 PDT 2011
[    20.941] (II) Loading extension GLX
[    20.941] (II) LoadModule: "record"
[    20.941] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    20.941] (II) Module record: vendor="X.Org Foundation"
[    20.941] 	compiled for 1.10.4, module version = 1.13.0
[    20.941] 	Module class: X.Org Server Extension
[    20.941] 	ABI class: X.Org Server Extension, version 5.0
[    20.941] (II) Loading extension RECORD
[    20.941] (II) LoadModule: "dri"
[    20.941] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    20.941] (II) Module dri: vendor="X.Org Foundation"
[    20.941] 	compiled for 1.10.4, module version = 1.0.0
[    20.941] 	ABI class: X.Org Server Extension, version 5.0
[    20.941] (II) Loading extension XFree86-DRI
[    20.941] (II) LoadModule: "dri2"
[    20.941] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    20.941] (II) Module dri2: vendor="X.Org Foundation"
[    20.941] 	compiled for 1.10.4, module version = 1.2.0
[    20.941] 	ABI class: X.Org Server Extension, version 5.0
[    20.941] (II) Loading extension DRI2
[    20.941] (II) LoadModule: "nvidia"
[    20.941] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    20.942] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.942] 	compiled for 4.0.2, module version = 1.0.0
[    20.942] 	Module class: X.Org Video Driver
[    20.942] (II) NVIDIA dlloader X Driver  280.13  Wed Jul 27 16:55:26 PDT 2011
[    20.942] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.942] (++) using VT number 1

[    20.943] (II) Loading sub module "fb"
[    20.943] (II) LoadModule: "fb"
[    20.943] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    20.944] (II) Module fb: vendor="X.Org Foundation"
[    20.944] 	compiled for 1.10.4, module version = 1.0.0
[    20.944] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.944] (II) Loading sub module "wfb"
[    20.944] (II) LoadModule: "wfb"
[    20.944] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    20.944] (II) Module wfb: vendor="X.Org Foundation"
[    20.944] 	compiled for 1.10.4, module version = 1.0.0
[    20.944] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.944] (II) Loading sub module "ramdac"
[    20.944] (II) LoadModule: "ramdac"
[    20.944] (II) Module "ramdac" already built-in
[    20.944] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    20.944] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    20.944] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    20.944] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    20.944] (==) NVIDIA(0): RGB weight 888
[    20.944] (==) NVIDIA(0): Default visual is TrueColor
[    20.944] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.274] (II) NVIDIA(GPU-0): Display (HannStar Display Corp HSD173PUW1 (DFP-0)) does not
[    22.274] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    22.279] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 285M (G92) at PCI:2:0:0 (GPU-0)
[    22.279] (--) NVIDIA(0): Memory: 1048576 kBytes
[    22.279] (--) NVIDIA(0): VideoBIOS: 62.92.ae.00.0c
[    22.279] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    22.279] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    22.279] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 285M at PCI:2:0:0
[    22.279] (--) NVIDIA(0):     HannStar Display Corp HSD173PUW1 (DFP-0)
[    22.279] (--) NVIDIA(0): HannStar Display Corp HSD173PUW1 (DFP-0): 330.0 MHz maximum
[    22.279] (--) NVIDIA(0):     pixel clock
[    22.279] (--) NVIDIA(0): HannStar Display Corp HSD173PUW1 (DFP-0): Internal Dual Link
[    22.279] (--) NVIDIA(0):     LVDS
[    22.290] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[    22.290] (**) NVIDIA(0):     enabled on all display devices.
[    22.329] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    22.329] (II) NVIDIA(0): Validated modes:
[    22.329] (II) NVIDIA(0):     "nvidia-auto-select"
[    22.329] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    23.388] (--) NVIDIA(0): DPI set to (125, 119); computed from "UseEdidDpi" X config
[    23.388] (--) NVIDIA(0):     option
[    23.389] (--) Depth 24 pixmap format is 32 bpp
[    23.389] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    23.410] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    23.701] (II) Loading extension NV-GLX
[    23.757] (==) NVIDIA(0): Disabling shared memory pixmaps
[    23.757] (==) NVIDIA(0): Backing store disabled
[    23.757] (==) NVIDIA(0): Silken mouse enabled
[    23.758] (==) NVIDIA(0): DPMS enabled
[    23.758] (II) Loading extension NV-CONTROL
[    23.758] (II) Loading extension XINERAMA
[    23.758] (II) Loading sub module "dri2"
[    23.758] (II) LoadModule: "dri2"
[    23.758] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    23.758] (II) Module dri2: vendor="X.Org Foundation"
[    23.758] 	compiled for 1.10.4, module version = 1.2.0
[    23.758] 	ABI class: X.Org Server Extension, version 5.0
[    23.758] (II) NVIDIA(0): [DRI2] Setup complete
[    23.759] (==) RandR enabled
[    23.759] (II) Initializing built-in extension Generic Event Extension
[    23.759] (II) Initializing built-in extension SHAPE
[    23.759] (II) Initializing built-in extension MIT-SHM
[    23.759] (II) Initializing built-in extension XInputExtension
[    23.759] (II) Initializing built-in extension XTEST
[    23.759] (II) Initializing built-in extension BIG-REQUESTS
[    23.759] (II) Initializing built-in extension SYNC
[    23.759] (II) Initializing built-in extension XKEYBOARD
[    23.759] (II) Initializing built-in extension XC-MISC
[    23.759] (II) Initializing built-in extension XINERAMA
[    23.759] (II) Initializing built-in extension XFIXES
[    23.759] (II) Initializing built-in extension RENDER
[    23.759] (II) Initializing built-in extension RANDR
[    23.759] (II) Initializing built-in extension COMPOSITE
[    23.759] (II) Initializing built-in extension DAMAGE
[    23.759] (II) SELinux: Disabled on system
[    23.760] (II) Initializing extension GLX
[    23.946] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    23.946] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    23.946] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    23.946] (II) LoadModule: "evdev"
[    23.947] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    23.947] (II) Module evdev: vendor="X.Org Foundation"
[    23.947] 	compiled for 1.10.1, module version = 2.6.0
[    23.947] 	Module class: X.Org XInput Driver
[    23.947] 	ABI class: X.Org XInput driver, version 12.2
[    23.947] (II) Using input driver 'evdev' for 'Power Button'
[    23.947] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    23.947] (**) Power Button: always reports core events
[    23.947] (**) Power Button: Device: "/dev/input/event3"
[    23.947] (--) evdev: Power Button: Vendor 0 Product 0x1
[    23.947] (--) Power Button: Found keys
[    23.947] (II) Power Button: Configuring as keyboard
[    23.947] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    23.947] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    23.947] (**) Option "xkb_rules" "evdev"
[    23.947] (**) Option "xkb_model" "pc105"
[    23.947] (**) Option "xkb_layout" "fr"
[    23.947] (**) Option "xkb_variant" "latin9"
[    23.947] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.066] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    24.067] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.067] (**) Video Bus: Applying InputClass "system-setup-keyboard"
[    24.067] (II) Using input driver 'evdev' for 'Video Bus'
[    24.067] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.067] (**) Video Bus: always reports core events
[    24.067] (**) Video Bus: Device: "/dev/input/event7"
[    24.067] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.067] (--) Video Bus: Found keys
[    24.067] (II) Video Bus: Configuring as keyboard
[    24.067] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input7/event7"
[    24.067] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    24.067] (**) Option "xkb_rules" "evdev"
[    24.067] (**) Option "xkb_model" "pc105"
[    24.067] (**) Option "xkb_layout" "fr"
[    24.067] (**) Option "xkb_variant" "latin9"
[    24.067] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.068] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    24.068] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.068] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    24.068] (II) Using input driver 'evdev' for 'Power Button'
[    24.068] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.068] (**) Power Button: always reports core events
[    24.068] (**) Power Button: Device: "/dev/input/event0"
[    24.068] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.068] (--) Power Button: Found keys
[    24.068] (II) Power Button: Configuring as keyboard
[    24.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    24.068] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.068] (**) Option "xkb_rules" "evdev"
[    24.068] (**) Option "xkb_model" "pc105"
[    24.068] (**) Option "xkb_layout" "fr"
[    24.068] (**) Option "xkb_variant" "latin9"
[    24.068] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.069] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    24.069] (II) No input driver/identifier specified (ignoring)
[    24.069] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    24.069] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.069] (**) Sleep Button: Applying InputClass "system-setup-keyboard"
[    24.069] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.069] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.069] (**) Sleep Button: always reports core events
[    24.069] (**) Sleep Button: Device: "/dev/input/event1"
[    24.069] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.069] (--) Sleep Button: Found keys
[    24.069] (II) Sleep Button: Configuring as keyboard
[    24.069] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[    24.069] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    24.069] (**) Option "xkb_rules" "evdev"
[    24.069] (**) Option "xkb_model" "pc105"
[    24.069] (**) Option "xkb_layout" "fr"
[    24.070] (**) Option "xkb_variant" "latin9"
[    24.070] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.072] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event10)
[    24.072] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[    24.072] (**) BisonCam, NB Pro: Applying InputClass "system-setup-keyboard"
[    24.072] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[    24.072] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.072] (**) BisonCam, NB Pro: always reports core events
[    24.072] (**) BisonCam, NB Pro: Device: "/dev/input/event10"
[    24.072] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x343
[    24.072] (--) BisonCam, NB Pro: Found keys
[    24.073] (II) BisonCam, NB Pro: Configuring as keyboard
[    24.073] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10/event10"
[    24.073] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD)
[    24.073] (**) Option "xkb_rules" "evdev"
[    24.073] (**) Option "xkb_model" "pc105"
[    24.073] (**) Option "xkb_layout" "fr"
[    24.073] (**) Option "xkb_variant" "latin9"
[    24.073] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.075] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event6)
[    24.075] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[    24.075] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[    24.075] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.075] (**) Logitech Optical USB Mouse: always reports core events
[    24.075] (**) Logitech Optical USB Mouse: Device: "/dev/input/event6"
[    24.075] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[    24.075] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[    24.075] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[    24.075] (--) Logitech Optical USB Mouse: Found relative axes
[    24.075] (--) Logitech Optical USB Mouse: Found x and y relative axes
[    24.075] (II) Logitech Optical USB Mouse: Configuring as mouse
[    24.075] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[    24.075] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[    24.075] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input6/event6"
[    24.075] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
[    24.075] (II) Logitech Optical USB Mouse: initialized for relative axes.
[    24.075] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[    24.075] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[    24.075] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[    24.075] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[    24.075] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse1)
[    24.075] (II) No input driver/identifier specified (ignoring)
[    24.079] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    24.079] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.079] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
[    24.079] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.079] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.079] (**) AT Translated Set 2 keyboard: always reports core events
[    24.079] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    24.079] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.079] (--) AT Translated Set 2 keyboard: Found keys
[    24.079] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    24.079] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    24.079] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    24.079] (**) Option "xkb_rules" "evdev"
[    24.079] (**) Option "xkb_model" "pc105"
[    24.079] (**) Option "xkb_layout" "fr"
[    24.079] (**) Option "xkb_variant" "latin9"
[    24.079] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.080] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event5)
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall"
[    24.080] (II) Using input driver 'evdev' for 'FSPPS/2 Sentelic FingerSensingPad'
[    24.080] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: always reports core events
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event5"
[    24.080] (--) evdev: FSPPS/2 Sentelic FingerSensingPad: Vendor 0x2 Product 0xf
[    24.080] (--) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons
[    24.080] (--) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s)
[    24.080] (--) FSPPS/2 Sentelic FingerSensingPad: Found relative axes
[    24.080] (--) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes
[    24.080] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse
[    24.080] (II) FSPPS/2 Sentelic FingerSensingPad: Adding scrollwheel support
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.080] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input5/event5"
[    24.080] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE)
[    24.080] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes.
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: (accel) keeping acceleration scheme 1
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration profile 0
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration factor: 2.000
[    24.080] (**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration threshold: 4
[    24.080] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)
[    24.080] (II) No input driver/identifier specified (ignoring)
[    24.083] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/event9)
[    24.083] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev pointer catchall"
[    24.083] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "evdev keyboard catchall"
[    24.083] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "system-setup-keyboard"
[    24.083] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ite-cir)'
[    24.083] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): always reports core events
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): Device: "/dev/input/event9"
[    24.084] (--) evdev: MCE IR Keyboard/Mouse (ite-cir): Vendor 0 Product 0
[    24.084] (--) MCE IR Keyboard/Mouse (ite-cir): Found 3 mouse buttons
[    24.084] (--) MCE IR Keyboard/Mouse (ite-cir): Found relative axes
[    24.084] (--) MCE IR Keyboard/Mouse (ite-cir): Found x and y relative axes
[    24.084] (--) MCE IR Keyboard/Mouse (ite-cir): Found keys
[    24.084] (II) MCE IR Keyboard/Mouse (ite-cir): Configuring as mouse
[    24.084] (II) MCE IR Keyboard/Mouse (ite-cir): Configuring as keyboard
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): YAxisMapping: buttons 4 and 5
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.084] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    24.084] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ite-cir)" (type: KEYBOARD)
[    24.084] (**) Option "xkb_rules" "evdev"
[    24.084] (**) Option "xkb_model" "pc105"
[    24.084] (**) Option "xkb_layout" "fr"
[    24.084] (**) Option "xkb_variant" "latin9"
[    24.084] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[    24.084] (II) MCE IR Keyboard/Mouse (ite-cir): initialized for relative axes.
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) keeping acceleration scheme 1
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration profile 0
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration factor: 2.000
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): (accel) acceleration threshold: 4
[    24.084] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ite-cir) (/dev/input/mouse2)
[    24.084] (**) MCE IR Keyboard/Mouse (ite-cir): Applying InputClass "system-setup-keyboard"
[    24.084] (II) No input driver/identifier specified (ignoring)
[    24.086] (II) config/udev: Adding input device ITE8708 CIR transceiver (/dev/input/event8)
[    24.086] (**) ITE8708 CIR transceiver: Applying InputClass "evdev keyboard catchall"
[    24.086] (**) ITE8708 CIR transceiver: Applying InputClass "system-setup-keyboard"
[    24.086] (II) Using input driver 'evdev' for 'ITE8708 CIR transceiver'
[    24.086] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    24.086] (**) ITE8708 CIR transceiver: always reports core events
[    24.086] (**) ITE8708 CIR transceiver: Device: "/dev/input/event8"
[    24.086] (--) evdev: ITE8708 CIR transceiver: Vendor 0x1283 Product 0
[    24.086] (--) ITE8708 CIR transceiver: Found keys
[    24.086] (II) ITE8708 CIR transceiver: Configuring as keyboard
[    24.086] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input8/event8"
[    24.086] (II) XINPUT: Adding extended input device "ITE8708 CIR transceiver" (type: KEYBOARD)
[    24.086] (**) Option "xkb_rules" "evdev"
[    24.086] (**) Option "xkb_model" "pc105"
[    24.086] (**) Option "xkb_layout" "fr"
[    24.086] (**) Option "xkb_variant" "latin9"
[    24.086] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"


Quelqu'un a-til une idée ??

Merci par avance

EDIT : aprés reboot un top "normal" avec LO ouvert sans soucis donne ceci :

[test@ltest ffmpeg]$ top

top - 04:45:48 up 25 min,  1 user,  load average: 0.16, 0.06, 0.06
Tasks: 151 total,   1 running, 150 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.4%us,  0.1%sy,  0.0%ni, 99.1%id,  0.4%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   6103060k total,   772516k used,  5330544k free,    36424k buffers
Swap: 10239996k total,        0k used, 10239996k free,   320004k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND                                                                                                                          
 1734 test      20   0 1162m 122m  71m S  2.0  2.1   0:04.35 soffice.bin                                                                                                                      
 1135 root      20   0  126m  23m  11m S  1.6  0.4   0:18.14 X                                                                                                                                
 1648 test      20   0  308m  11m 8652 S  1.0  0.2   0:00.35 Terminal                                                                                                                         
 1664 test      20   0  285m 9896 7868 S  0.7  0.2   0:03.32 lxtask                                                                                                                           
 1479 test      20   0  193m 8288 4388 S  0.3  0.1   0:00.51 openbox                                                                                                                          
 1801 test      20   0 15128 1200  876 R  0.3  0.0   0:00.04 top                                                                                                                              
    1 root      20   0 36952 4512 1852 S  0.0  0.1   0:01.54 systemd                                                                                                                          
    2 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kthreadd                                                                                                                         
    3 root      20   0     0    0    0 S  0.0  0.0   0:00.02 ksoftirqd/0                                                                                                                      
    4 root      20   0     0    0    0 S  0.0  0.0   0:00.21 kworker/0:0                                                                                                                      
    6 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0                                                                                                                      
    7 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/0                                                                                                                       
    8 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/1                                                                                                                      
   10 root      20   0     0    0    0 S  0.0  0.0   0:00.02 ksoftirqd/1                                                                                                                      
   12 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/1                                                                                                                       
   13 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/2                                                                                                                      
   15 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/2                                                                                                                      
   16 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/2                                                                                                                       
   17 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/3                                                                                                                      
   19 root      20   0     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/3                                                                                                                      
   20 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/3                                                                                                                       
   21 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/4                                                                                                                      
   22 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kworker/4:0                                                                                                                      
   23 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/4                                                                                                                      
   24 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 watchdog/4                                                                                                                       
   25 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/5                                                                                                                      
   26 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kworker/5:0                                                                                                                      
   27 root      20   0     0    0    0 S  0.0  0.0   0:00.01 ksoftirqd/5                                                                                                                      
   28 root      RT   0     0    0    0 S  0.0  0.0   0:00.04 watchdog/5                                                                                                                       
   29 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/6                                                                                                                      
   31 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/6                                                                                                                      
   32 root      RT   0     0    0    0 S  0.0  0.0   0:00.06 watchdog/6                                                                                                                       
   33 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/7                                                                                                                      
   34 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kworker/7:0                                                                                                                      
   35 root      20   0     0    0    0 S  0.0  0.0   0:00.00 ksoftirqd/7                                                                                                                      
   36 root      RT   0     0    0    0 S  0.0  0.0   0:00.05 watchdog/7                                                                                                                       
   37 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 cpuset                                                                                                                           
   38 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 khelper                                                                                                                          
   39 root      20   0     0    0    0 S  0.0  0.0   0:00.00 kdevtmpfs                                                                                                                        
   40 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 netns                                                                                                                            
   41 root      20   0     0    0    0 S  0.0  0.0   0:00.00 sync_supers                                                                                                                      
   42 root      20   0     0    0    0 S  0.0  0.0   0:00.00 bdi-default                                                                                                                      
   43 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kintegrityd                                                                                                                      
   44 root       0 -20     0    0    0 S  0.0  0.0   0:00.00 kblockd  

Perso je t'aurais conseillé d'attendre F17, mais déjà la version qui se trouve dans fedora 15 fonctionne très bien.

Après j'ai un doute sur le support de la version du site officiel par nos soins... Tu peux l'indiquer sur le bugzilla de LO.

Pour tes fuites mémoires, tu peux l'indiquer dans le bugzilla de Fedora, mais je te conseil quand même de passer à F16.
Rien remarqué de tel sous xfce en tous cas avec la même version de LO et F15 aussi.
Ta regarder au niveau des fichiers de configuration si ils ne sont pas un peut ancien?
@ VINDICATORs : oui j'ai supprimé le dossier /home/test/.config/.libreoffice avant d'installer LO. Y a-t-il d'autres fichiers de config que j'ai raté ?

Bon je vais essayer XFCE, mais le souci c'est que le freeze est aléatoire.

De toute façon, mon anglais n'est pas assez bon pour traduire ce problème dans un bugzilla celui de fedora ou de LO ...
Si ça le fait aussi sur d'autres programmes, une petite vérification de la ram avec memtest ne serais pas de trop, voir de ton disque dur avec smartctl...
Rappelons quand même que sur le site Libreoffice.org, il est précisé que la version de production conseillée pour le moment est la 3.4.5 car la version 3.5.x souffre encore de quelques maux de jeunesse.
@ VINDICATORs : c'est le seul programme avec lequel ca arrive, mais j'ai quand même fait un memtest qui n'a rien donné.

@ nouvo09 : si je suis passé a la version 3.5.1 c'est justement parce que la version 3.4.4.et la 3.4.3 avait le même souci chez moi et ceci malgré une réinstallation complète de ma f15 pour d'autres raisons...
un mois plus tard
Bonjour,

malgré la MAJ de la version 3.5.2 le problème persiste ...

Cependant j'ai trouvé cette discussion dur la mailing list de LXDE :

http://sourceforge.net/mailarchive/forum.php?thread_name=20120314101844.7ef5b024.nomnex%40gmail.com&forum_name=lxde-list

Si je comprend bien ( parce que mon anglais est moyen ... le problème vient de LXDE est sera résolu par la version 0.5.8 de lxpanel.

Donc il faudra attendre mon passage vers la f17 je crois sauf si quelqu'un a une autre idée ...
2 mois plus tard
Résolu avec la mise à jour de lxpanel en version 0.5.9 (trouvé dans les dépots updates-testing).

Maintenant ca mets un peu de temps a se charger à l'ouverture du premier fichier mais après c'est bon.