# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +75.0°C)
nouveau-pci-0300
Adapter: PCI adapter
temp1: +33.0°C (high = +100.0°C, crit = +110.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.10 V (min = +0.85 V, max = +1.60 V)
+12V Voltage: +12.22 V (min = +10.20 V, max = +13.80 V)
+5V Voltage: +5.08 V (min = +4.50 V, max = +5.50 V)
+3.3V Voltage: +3.25 V (min = +2.97 V, max = +3.63 V)
CPU_FAN FAN Speed: 1603 RPM (min = 800 RPM)
CHA_FAN1 FAN Speed: 2566 RPM (min = 800 RPM)
CHA_FAN2 FAN Speed: 0 RPM (min = 800 RPM)
PWR FAN FAN Speed: 0 RPM (min = 800 RPM)
CPU Temperature: +39.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +31.0°C (high = +45.0°C, crit = +95.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +32.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +35.0°C (high = +80.0°C, crit = +100.0°C)
Voilà pour la commande sensors.
Quant au ondemand je ne sais pas, mais je ne sais pas non plus comment faire...J'ai essayé en suivant ce tuto -
http://tetedulinuxien.fr/2011/12/tweaks-fedora-16/ - mais comme bien souvent c'est derniers temps rien ne marche...
