Bonjour à tous 😃
Bon je viens de passer du temps à chercher pourquoi le boot de mon pc est lent avec Fedora, (c'est bien la première distrib qui me donne autant de soucis).
Bon voilà ce que j'ai fait, ce que j'ai trouvé par contre j'ai besoin de vous pour comprendre. Je vais essayer d'être clair.
Le boot prenait bien 2 mns. J'ai cherché sur le forum mais bon ce que j'en ai vu, c'est disque peut être cassé etc... non pas que je crois pas à la fatalité mais pour un pc neuf ca me paraissait un peu bizarre.
En plus je vous rappelle je suis un newbie en linux et ata 5 je vois pas dessus lequel c'est car j'ai un disque dur SATA avec deux lecteurs un CD/DVD et l'autre graveur également en SATA.
En plus c'est une F15 qui vient juste d'être installé aujourd'hui (oui parce que l'autre a pété je sais pas pourquoi).
J'ai donc regarder le log de boot et le dmesg ce qui donnait ceci :
Log de boot
Welcome to [0;34mFedora release 15 (Lovelock)[0m!
Starting Replay Read-Ahead Data...
Starting Collect Read-Ahead Data...
Starting Bootup hack...
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge.
Started Lock Directory.
Started Runtime Directory.
Starting Media Directory...
Started Replay Read-Ahead Data.
Starting Stdio Syslog Bridge...
Started Stdio Syslog Bridge.
Started Collect Read-Ahead Data.
Started Load legacy module configuration.
Started File System Check on Root Device.
Starting Remount Root FS...
Starting Remount API VFS...
Starting Apply System Clock UTC Offset...
Starting Apply Kernel Variables...
Started Load Kernel Modules.
Started Set Up Additional Binary Formats.
Starting Setup Virtual Console...
Started Apply Kernel Variables.
Started Bootup hack.
Started Apply System Clock UTC Offset.
Starting udev Kernel Device Manager...
Started Media Directory.
Started Remount API VFS.
Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
Started Remount Root FS.
Starting Configure read-only root support...
Started Setup Virtual Console.
Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
Started udev Kernel Device Manager.
Started Configure read-only root support.
Starting /dev/disk/by-uuid/2e6fb227-4e8d-45fc-8161-469944c87c28...
Started /dev/disk/by-uuid/2e6fb227-4e8d-45fc-8161-469944c87c28.
Started udev Wait for Complete Device Initialization.
Starting Wait for storage scan...
Started Show Plymouth Boot Screen.
Started Wait for storage scan.
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Starting Huge Pages File System...
Started Huge Pages File System.
Starting POSIX Message Queue File System...
Started POSIX Message Queue File System.
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Enable all detected swap partitions...
Started Mark the need to relabel after reboot.
Started Reconfigure the system on administrator request.
Started Relabel all filesystems, if necessary.
Starting Recreate Volatile Files and Directories...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Load Random Seed...
Started Enable all detected swap partitions.
Started Tell Plymouth To Write Out Runtime Data.
Started Load Random Seed.
Started Recreate Volatile Files and Directories.
Starting Restore Sound Card State...
Starting Console System Startup Logging...
Starting Bootup unhack...
Starting Job spooling tools...
Started Job spooling tools.
Starting SYSV: Init script for live image....
Starting System Logging Service...
Starting ABRT Automated Bug Reporting Tool...
Starting Avahi mDNS/DNS-SD Stack...
Starting irqbalance daemon...
Starting Command Scheduler...
Started Command Scheduler.
Starting Machine Check Exception Logging Daemon...
Starting Network Manager...
Starting System Setup Keyboard...
Started System Setup Keyboard.
Starting D-Bus System Message Bus...
Started Console System Startup Logging.
Started Bootup unhack.
Started Restore Sound Card State.
Started SYSV: Init script for live image..
Started irqbalance daemon.
Started Machine Check Exception Logging Daemon.
Starting SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot. This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off....
Started D-Bus System Message Bus.
Started SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot. This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off..
Starting LSB: Port reservation utility...
Starting LSB: start and stop iptables firewall...
Starting LSB: Starts and stops login iSCSI daemon....
Starting LSB: start and stop ip6tables firewall...
Starting LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Started Avahi mDNS/DNS-SD Stack.
Started ABRT Automated Bug Reporting Tool.
Starting Bluetooth Manager...
Started Network Manager.
Stopping Syslog Kernel Log Buffer Bridge...
Stopped Syslog Kernel Log Buffer Bridge.
Started System Logging Service.
Started Bluetooth Manager.
Started LSB: Port reservation utility.
Started LSB: start and stop iptables firewall.
Started LSB: start and stop ip6tables firewall.
Started LSB: Starts and stops login iSCSI daemon..
Started LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Starting SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog....
Started SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog..
Starting LSB: Starts and stops login and scanning of iSCSI devices....
Starting LSB: processor frequency scaling support...
Starting LSB: Mount and unmount network filesystems....
Starting LSB: Installs coredump handler which saves segfault data...
Starting LSB: Watches system log for oops messages, creates ABRT dump directories for each oops...
Starting LSB: start and stop sendmail...
Starting LSB: Start and stop the MD software RAID monitor...
Starting LSB: The CUPS scheduler...
Starting LSB: Link Layer Discovery Protocol Agent Daemon...
Starting /etc/rc.local Compatibility...
Started LSB: processor frequency scaling support.
Started LSB: Watches system log for oops messages, creates ABRT dump directories for each oops.
Started /etc/rc.local Compatibility.
Started LSB: Installs coredump handler which saves segfault data.
Starting Wait for Plymouth Boot Screen to Quit...
Started LSB: Link Layer Discovery Protocol Agent Daemon.
Started LSB: Start and stop the MD software RAID monitor.
Started LSB: The CUPS scheduler.
Started LSB: start and stop sendmail.
Started LSB: Starts and stops login and scanning of iSCSI devices..
Started LSB: Mount and unmount network filesystems..
Starting SYSV: Late init script for live image....
Starting Permit User Sessions...
Started Permit User Sessions.
Started SYSV: Late init script for live image..
Dmesg
[ 1.244289] [drm] Radeon Display Connectors
[ 1.244290] [drm] Connector 0:
[ 1.244292] [drm] HDMI-A
[ 1.244292] [drm] HPD2
[ 1.244294] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.244295] [drm] Encoders:
[ 1.244296] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.244298] [drm] Connector 1:
[ 1.244298] [drm] DVI-I
[ 1.244299] [drm] HPD1
[ 1.244301] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.244302] [drm] Encoders:
[ 1.244303] [drm] DFP2: INTERNAL_UNIPHY1
[ 1.244304] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.244305] [drm] Connector 2:
[ 1.244306] [drm] VGA
[ 1.244308] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 1.244309] [drm] Encoders:
[ 1.244310] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.254153] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[ 1.306803] [drm] Radeon display connector DVI-I-1: Found valid EDID
[ 1.316602] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[ 1.316620] [drm] Internal thermal controller with fan control
[ 1.316648] [drm] radeon: power management initialized
[ 1.394778] [drm] fb mappable at 0xC0141000
[ 1.394780] [drm] vram apper at 0xC0000000
[ 1.394781] [drm] size 8294400
[ 1.394782] [drm] fb depth is 24
[ 1.394783] [drm] pitch is 7680
[ 1.394833] fbcon: radeondrmfb (fb0) is primary device
[ 1.608405] Console: switching to colour frame buffer device 240x67
[ 1.614654] fb0: radeondrmfb frame buffer device
[ 1.614655] drm: registered panic notifier
[ 1.614663] [drm] Initialized radeon 2.10.0 20080528 for 0000:02:00.0 on minor 0
[ 1.618044] dracut: Starting plymouth daemon
[ 1.744267] dracut: rd.dm=0: removing DM RAID activation
[ 1.747569] dracut: rd.md=0: removing MD RAID activation
[ 1.780749] pata_amd 0000:00:06.0: version 0.4.1
[ 1.780780] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.781298] scsi0 : pata_amd
[ 1.781443] scsi1 : pata_amd
[ 1.781772] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.781774] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.794766] sata_nv 0000:00:08.0: version 3.5
[ 1.794919] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.794933] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 1.794971] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.795548] scsi2 : sata_nv
[ 1.795610] scsi3 : sata_nv
[ 1.795686] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[ 1.795688] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[ 1.798376] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.798389] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[ 1.798412] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.799302] scsi4 : sata_nv
[ 1.799425] scsi5 : sata_nv
[ 1.799507] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[ 1.799510] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[ 1.943143] ata2: port disabled. ignoring.
[ 1.951033] usb 2-1: new low speed USB device number 2 using ohci_hcd
[ 1.984033] Refined TSC clocksource calibration: 3214.619 MHz.
[ 1.984042] Switching to clocksource tsc
[ 2.141059] usb 2-1: New USB device found, idVendor=046d, idProduct=c517
[ 2.141062] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.141064] usb 2-1: Product: USB Receiver
[ 2.141066] usb 2-1: Manufacturer: Logitech
[ 2.151207] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[ 2.151260] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1/input0
[ 2.161057] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.161449] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input3
[ 2.161553] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1/input1
[ 2.249049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.254043] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.257138] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB06, max UDMA/100
[ 2.263138] ata5.00: configured for UDMA/100
[ 2.268219] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.268222] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.287216] ata3.00: configured for UDMA/133
[ 2.287317] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.287406] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.287423] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.287438] sd 2:0:0:0: [sda] Write Protect is off
[ 2.287440] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.287453] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.334065] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.334328] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.422025] usb 2-2: new full speed USB device number 3 using ohci_hcd
[ 2.600358] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.601501] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB06 PQ: 0 ANSI: 5
[ 2.605308] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.605310] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.605395] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.605434] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.611058] usb 2-2: New USB device found, idVendor=172f, idProduct=0034
[ 2.611060] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.611062] usb 2-2: Product: Slim Tablet
[ 2.611063] usb 2-2: Manufacturer: WALTOP International Corp.
[ 2.875028] usb 2-3: new low speed USB device number 4 using ohci_hcd
[ 3.059049] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.062132] ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163C, SB01, max UDMA/100
[ 3.068131] ata6.00: configured for UDMA/100
[ 3.069530] scsi 5:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163C SB01 PQ: 0 ANSI: 5
[ 3.071483] sr1: scsi3-mmc drive: 16x/32x cd/rw xa/form2 cdda tray
[ 3.071564] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 3.071605] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 3.085045] usb 2-3: New USB device found, idVendor=06a3, idProduct=8020
[ 3.085048] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.085050] usb 2-3: Product: Saitek Eclipse Keyboard
[ 3.085051] usb 2-3: Manufacturer: Chicony
[ 3.104194] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
[ 3.104248] generic-usb 0003:06A3:8020.0004: input,hidraw2: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:02.0-3/input0
[ 3.136097] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input5
[ 3.136170] generic-usb 0003:06A3:8020.0005: input,hiddev0,hidraw3: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:02.0-3/input1
[ 3.397025] usb 2-4: new full speed USB device number 5 using ohci_hcd
[ 3.586058] usb 2-4: New USB device found, idVendor=0d8c, idProduct=013c
[ 3.586061] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.586063] usb 2-4: Product: USB PnP Sound Device
[ 3.586064] usb 2-4: Manufacturer: C-Media Electronics Inc.
[ 3.598115] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.3/input/input6
[ 3.598175] generic-usb 0003:0D8C:013C.0006: input,hidraw4: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:02.0-4/input3
[ 3.859034] usb 2-10: new full speed USB device number 6 using ohci_hcd
[ 4.045058] usb 2-10: New USB device found, idVendor=045e, idProduct=00f7
[ 4.045060] usb 2-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.045062] usb 2-10: Product: USB camera
[ 65.760132] ata5: drained 392 bytes to clear DRQ.
[ 65.760138] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 65.760176] sr 4:0:0:0: [sr0] CDB: Get configuration: 46 00 00 00 00 00 00 01 64 00
[ 65.760184] ata5.00: cmd a0/00:00:00:64:01/00:00:00:00:00/a0 tag 0 pio 16740 in
[ 65.760185] res 58/00:02:00:64:01/00:00:00:00:00/a0 Emask 0x6 (timeout)
[ 65.760256] ata5.00: status: { DRDY DRQ }
[ 65.760279] ata5: hard resetting link
[ 65.760281] ata5: nv: skipping hardreset on occupied port
[ 66.214060] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 66.223137] ata5.00: configured for UDMA/100
[ 66.224888] ata5: EH complete
[ 68.872648] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 68.946299] dracut: Checking filesystems
[ 68.946315] dracut: fsck -T -t noopts=_netdev -A -a
[ 68.982069] dracut: _Fedora-15-x86_6: clean, 86513/9535488 files, 1242892/38111744 blocks
[ 68.982149] dracut: Remounting /dev/disk/by-uuid/8103da27-2ebc-459e-ad7f-23f87a12de8e with -o ro,
[ 69.005965] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 69.011414] dracut: Mounted root filesystem /dev/sda5
[ 69.132540] dracut: Switching root
[ 69.462162] type=1404 audit(1314134009.816:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 69.581286] SELinux: 2048 avtab hash slots, 224251 rules.
[ 69.621268] SELinux: 2048 avtab hash slots, 224251 rules.
[ 69.820246] SELinux: 9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats
[ 69.820250] SELinux: 81 classes, 224251 rules
[ 69.823634] SELinux: Completing initialization.
[ 69.823636] SELinux: Setting up existing superblocks.
[ 69.823642] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 69.823647] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 69.823657] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 69.823661] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 69.823668] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.823689] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 69.824171] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 69.824175] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 69.824860] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 69.824864] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 69.824868] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 69.824881] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 69.824891] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 69.824897] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 69.824909] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 69.824914] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 69.824918] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 69.825248] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.825253] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 69.825556] SELinux: initialized (dev sda5, type ext4), uses xattr
[ 69.827118] type=1403 audit(1314134010.181:3): policy loaded auid=4294967295 ses=4294967295
[ 70.022750] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 70.023275] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.154053] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.157047] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.160054] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.163056] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.165057] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.169036] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.171052] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.175056] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.175343] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 70.206483] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 70.353950] NET: Registered protocol family 10
[ 70.366863] systemd[1]: Set hostname to <CrystalNoir-Fedora>.
[ 71.190798] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 71.192632] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 71.193070] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 71.193305] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 71.193528] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 79.211647] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 79.409819] udev[506]: starting version 167
[ 79.439297] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 79.515601] MCE: In-kernel MCE decoding enabled.
[ 79.516256] EDAC MC: Ver: 2.1.0
[ 79.516542] AMD64 EDAC driver v3.4.0
[ 79.518082] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 79.518233] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 79.518238] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 79.518241] forcedeth 0000:00:07.0: setting latency timer to 64
[ 79.547481] parport_pc 00:05: reported by Plug and Play ACPI
[ 79.548287] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 79.568442] mtp-probe[625]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2"
[ 79.568490] mtp-probe[623]: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4"
[ 79.570961] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:ae:c5:af:41:6d
[ 79.570964] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 79.571342] mtp-probe[624]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3"
[ 79.575264] mtp-probe[622]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1"
[ 79.579033] EDAC amd64: DRAM ECC disabled.
[ 79.579039] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 79.579040] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 79.579041] (Note that use of the override may cause unknown side effects.)
[ 79.582065] i2c i2c-8: nForce2 SMBus adapter at 0x600
[ 79.582081] i2c i2c-9: nForce2 SMBus adapter at 0x700
[ 79.600552] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 79.600558] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 79.600560] hda_intel: Disabling MSI
[ 79.600594] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 79.611162] ALSA sound/pci/hda/hda_intel.c:1452 Enable delay in RIRB handling
[ 79.620508] mtp-probe[623]: bus: 2, device: 5 was not an MTP device
[ 79.620715] mtp-probe[624]: bus: 2, device: 4 was not an MTP device
[ 79.620910] mtp-probe[622]: bus: 2, device: 2 was not an MTP device
[ 79.621106] mtp-probe[625]: bus: 2, device: 3 was not an MTP device
[ 79.637469] microcode: CPU0: patch_level=0x010000b6
[ 79.654229] mtp-probe[671]: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:02.0/usb2/2-10"
[ 79.664123] input: WALTOP International Corp. Slim Tablet as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input7
[ 79.664360] waltop 0003:172F:0034.0003: input,hidraw5: USB HID v1.10 Device [WALTOP International Corp. Slim Tablet] on usb-0000:00:02.0-2/input0
[ 79.679083] ALSA sound/usb/mixer.c:794 13:0: cannot get min/max values for control 2 (id 13)
[ 79.679135] ALSA sound/usb/mixer.c:794 9:0: cannot get min/max values for control 2 (id 9)
[ 79.679178] ALSA sound/usb/mixer.c:794 10:0: cannot get min/max values for control 2 (id 10)
[ 79.692081] ALSA sound/usb/mixer.c:794 2:1: cannot get min/max values for control 2 (id 2)
[ 79.692236] usbcore: registered new interface driver snd-usb-audio
[ 79.694291] ppdev: user-space parallel port driver
[ 79.701759] microcode: CPU1: patch_level=0x010000b6
[ 79.706875] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 79.751130] mtp-probe[671]: bus: 2, device: 6 was not an MTP device
[ 79.760237] Linux media interface: v0.10
[ 79.760980] Linux video capture interface: v2.00
[ 79.761413] gspca: v2.13.0 registered
[ 79.778128] input: sonixj as /devices/pci0000:00/0000:00:02.0/usb2/2-10/input/input8
[ 79.778222] usbcore: registered new interface driver sonixj
[ 79.790542] ALSA sound/pci/hda/hda_codec.c:4707 autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 79.790546] ALSA sound/pci/hda/hda_codec.c:4711 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 79.790548] ALSA sound/pci/hda/hda_codec.c:4715 hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 79.790550] ALSA sound/pci/hda/hda_codec.c:4716 mono: mono_out=0x0
[ 79.790551] ALSA sound/pci/hda/hda_codec.c:4719 dig-out=0x20/0x0
[ 79.790553] ALSA sound/pci/hda/hda_codec.c:4720 inputs:
[ 79.790555] ALSA sound/pci/hda/hda_codec.c:4724 Rear Mic=0x1a
[ 79.790556] ALSA sound/pci/hda/hda_codec.c:4724 Front Mic=0x1e
[ 79.790558] ALSA sound/pci/hda/hda_codec.c:4724 Line=0x1b
[ 79.790559] ALSA sound/pci/hda/hda_codec.c:4726
[ 79.921426] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
[ 79.921442] HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18
[ 79.921445] ALSA sound/pci/hda/hda_intel.c:2413 Using LPIB position fix
[ 79.921503] HDA Intel 0000:02:00.1: irq 44 for MSI/MSI-X
[ 79.921520] HDA Intel 0000:02:00.1: setting latency timer to 64
[ 79.922542] Adding 4192252k swap on /dev/sda6. Priority:0 extents:1 across:4192252k
[ 79.931068] ALSA sound/pci/hda/hda_intel.c:1490 Enable sync_write for stable communication
[ 79.935258] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 79.936319] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card3/input9
[ 139.744135] ata5: drained 392 bytes to clear DRQ.
[ 139.744141] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 139.744182] sr 4:0:0:0: [sr0] CDB: Get configuration: 46 00 00 00 00 00 00 01 64 00
[ 139.744190] ata5.00: cmd a0/00:00:00:64:01/00:00:00:00:00/a0 tag 0 pio 16740 in
[ 139.744191] res 58/00:02:00:64:01/00:00:00:00:00/a0 Emask 0x6 (timeout)
[ 139.744262] ata5.00: status: { DRDY DRQ }
[ 139.744286] ata5: hard resetting link
[ 139.744287] ata5: nv: skipping hardreset on occupied port
[ 140.198047] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 140.207135] ata5.00: configured for UDMA/100
[ 141.006096] ata5: EH complete
[ 142.935137] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 143.711855] abrtd[844]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
[ 143.726289] avahi-daemon[845]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[ 143.726523] avahi-daemon[845]: Successfully dropped root privileges.
[ 143.726799] avahi-daemon[845]: avahi-daemon 0.6.30 starting up.
[ 143.774050] NetworkManager[851]: <info> NetworkManager (version 0.8.9997-6.git20110721.fc15) is starting...
[ 143.774078] NetworkManager[851]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[ 143.996088] dbus[861]: avc: netlink poll: error 4
[ 143.996094] dbus[861]: avc: netlink poll: error 4
[ 144.001366] NetworkManager[851]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
[ 144.001449] NetworkManager[851]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
[ 144.001503] NetworkManager[851]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
[ 144.001553] NetworkManager[851]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
[ 144.015681] abrtd[844]: Init complete, entering main loop
[ 144.019153] avahi-daemon[845]: Successfully called chroot().
[ 144.019159] avahi-daemon[845]: Successfully dropped remaining capabilities.
[ 144.019163] avahi-daemon[845]: Loading service file /services/ssh.service.
[ 144.019167] avahi-daemon[845]: Loading service file /services/udisks.service.
[ 144.019171] avahi-daemon[845]: Network interface enumeration completed.
[ 144.019175] avahi-daemon[845]: Registering HINFO record with values 'X86_64'/'LINUX'.
[ 144.019180] avahi-daemon[845]: Server startup complete. Host name is CrystalNoir-Fedora.local. Local service cookie is 3044197196.
[ 144.019185] avahi-daemon[845]: Service "CrystalNoir-Fedora" (/services/udisks.service) successfully established.
[ 144.019189] avahi-daemon[845]: Service "CrystalNoir-Fedora" (/services/ssh.service) successfully established.
[ 144.041788] dbus[861]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
[ 144.069134] polkitd[877]: started daemon version 0.101 using authority implementation `local' version `0.101'
[ 144.069668] dbus[861]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
[ 144.075064] NetworkManager[851]: ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
[ 144.075128] NetworkManager[851]: <info> Loaded plugin ifcfg-rh: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
[ 144.075387] NetworkManager[851]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
[ 144.078552] NetworkManager[851]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
[ 144.087083] NetworkManager[851]: <info> trying to start the modem manager...
[ 144.087359] NetworkManager[851]: <info> monitoring kernel firmware directory '/lib/firmware'.
[ 144.088252] dbus[861]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
[ 144.088984] dbus[861]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
[ 144.094344] NetworkManager[851]: <info> WiFi enabled by radio killswitch; enabled by state file
[ 144.094409] NetworkManager[851]: <info> WWAN enabled by radio killswitch; enabled by state file
[ 144.094436] NetworkManager[851]: <info> WiMAX enabled by radio killswitch; enabled by state file
[ 144.094461] NetworkManager[851]: <info> Networking is enabled by state file
[ 144.096237] NetworkManager[851]: <info> (eth0): carrier is OFF
[ 144.096447] NetworkManager[851]: <info> (eth0): new Ethernet device (driver: 'forcedeth' ifindex: 2)
[ 144.096485] NetworkManager[851]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
[ 144.096515] NetworkManager[851]: <info> (eth0): now managed
[ 144.096544] NetworkManager[851]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
[ 144.096584] NetworkManager[851]: <info> (eth0): bringing up device.
[ 144.099486] forcedeth 0000:00:07.0: irq 45 for MSI/MSI-X
[ 144.102518] NetworkManager[851]: <info> (eth0): preparing device.
[ 144.102544] NetworkManager[851]: <info> (eth0): deactivating device (reason: 2).
[ 144.103394] NetworkManager[851]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:07.0/net/eth0
[ 144.118985] NetworkManager[851]: <info> (eth0): carrier now ON (device state 20)
[ 144.120169] NetworkManager[851]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
[ 144.120775] NetworkManager[851]: <info> Auto-activating connection 'Wired connection 1'.
[ 144.120887] NetworkManager[851]: <info> Activation (eth0) starting connection 'Wired connection 1'
[ 144.120909] NetworkManager[851]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
[ 144.121011] NetworkManager[851]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
[ 144.121109] NetworkManager[851]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started...
[ 144.121133] NetworkManager[851]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
[ 144.121149] NetworkManager[851]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
[ 144.121175] NetworkManager[851]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting...
[ 144.121193] NetworkManager[851]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0]
[ 144.121310] NetworkManager[851]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful.
[ 144.121445] NetworkManager[851]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
[ 144.121462] NetworkManager[851]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete.
[ 144.121519] NetworkManager[851]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
[ 144.121538] NetworkManager[851]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0]
[ 144.121688] NetworkManager[851]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds)
[ 144.123934] NetworkManager[851]: <info> dhclient started with pid 889
[ 144.123941] modem-manager[885]: <info> ModemManager (version 0.4.998-1.git20110706.fc15) starting...
[ 144.124062] NetworkManager[851]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
[ 144.149601] dbus[861]: [system] Successfully activated service 'org.freedesktop.ModemManager'
[ 144.214658] Bluetooth: Core ver 2.16
[ 144.214795] NET: Registered protocol family 31
[ 144.214796] Bluetooth: HCI device and connection manager initialized
[ 144.214798] Bluetooth: HCI socket layer initialized
[ 144.214800] Bluetooth: L2CAP socket layer initialized
[ 144.216027] Bluetooth: SCO socket layer initialized
[ 144.233712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 144.233714] Bluetooth: BNEP filters: protocol multicast
[ 144.308584] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 144.310253] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 144.769833] powernow-k8: Found 1 AMD Phenom(tm) II X2 555 Processor (2 cpu cores) (version 2.20.00)
[ 144.769841] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 144.769842] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 144.944568] 802.1Q VLAN Support v1.8
[ 148.832017] hda-intel: IRQ timing workaround is activated for card #3. Suggest a bigger bdl_pos_adj.
[ 154.978020] eth0: no IPv6 routers present
[ 159.201722] fuse init (API version 7.16)
[ 159.227852] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 159.240871] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
J'ai retenu deux choses :
[ 144.769841] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 144.769842] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
et
[ 65.760132] ata5: drained 392 bytes to clear DRQ.
[ 65.760138] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 65.760176] sr 4:0:0:0: [sr0] CDB: Get configuration: 46 00 00 00 00 00 00 01 64 00
[ 65.760184] ata5.00: cmd a0/00:00:00:64:01/00:00:00:00:00/a0 tag 0 pio 16740 in
[ 65.760185] res 58/00:02:00:64:01/00:00:00:00:00/a0 Emask 0x6 (timeout)
[ 65.760256] ata5.00: status: { DRDY DRQ }
[ 65.760279] ata5: hard resetting link
[ 65.760281] ata5: nv: skipping hardreset on occupied port
[ 66.214060] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 66.223137] ata5.00: configured for UDMA/100
[ 66.224888] ata5: EH complete
C'est d'ailleurs sur ces dernières ligne que ca bloquait sur exception Emask.
Après des recherches de partout j'ai fini par tester un truc qui a résolu mon problème : boot en 20 secondes c'est d'ajouter au boot :
acpi = off
Question :
Quel est le rapport avec la choucroute ? l'ACPI normalement ca gère l'énergie et cie j'vois pas le rapport avec l'exception usmask.
Depuis que je met cette option au boot je n'ai plus de problème ?
Autre question : c'est chouette mais comment je peux automatiser cela ? car entrer au boot à la main à chaque fois c'est un peu pénible.
Je vous remercie par avance.
