Ce que tu veux ce sont les sources modifiées, je crois ? Parceque pour l'instant, je n'ai pas de rpm qui se " construit " avec ce spec !
Donc, en plus de l'archive de noteedit, j'ai copié les .orig, les .in modifiés, et les .cpp modifiés dans ~/rpmbuild/SOURCES. Je crois que c'est comme cela qu'il faut faire, mais je ne suis pas sur !?
Voici donc configure :
Oh, la ! Il ne le veulent pas sur Fedora past ! trop long !!
Bon, alors, les lignes qui ont changé :
--- configure.orig 2011-08-05 19:38:23.721331901 +0000
+++ configure 2011-08-05 19:43:16.374652737 +0000
@@ -31565,10 +31565,10 @@
fi
cat >tse3vtest.cc << EOF
-#include <istream.h>
+#include <iostream>
#include <tse3/TSE3.h>
int main() {
- cout << TSE3::TSE3_Version() << endl;
+ std::cout << TSE3::TSE3_Version() << std::endl;
return 0;
}
EOF
Configure.in :
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
dnl Boston, MA 02111-1307, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(noteedit, 2.8.1) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.0.0)
AC_PATH_KDE
#MIN_CONFIG(3.0.0)
stdlibdirs="/usr/lib /usr/local/lib /usr/X11/lib /usr/X11R6/lib"
stdincdirs="/usr/include /usr/local/include /usr/X11/include /usr/X11R6/lib"
dnl
dnl FIND_PACKAGE(<name>, <libname>, <includename>,<libdirs>,<incldirs>)
dnl
AC_DEFUN(FIND_PACKAGE,[
echo -n "checking $1... "
for dir in $4
do
if test -f $dir/lib$2.so || test -f $dir/lib$2.a
then
lib_$1=$dir
break
fi
done
for dir in $5
do
if test -f $dir/$3
then
inc_$1=$dir
break
fi
done
echo "libs in $lib_$1; includes in $inc_$1"
])
dnl
dnl AC_NEW_ARG(<arg-name>)
dnl
AC_DEFUN(AC_NEW_ARG,[
AC_ARG_WITH($1-include,[ --with-$1-include=DIR $1 headers in DIR])
AC_ARG_WITH($1-libs,[ --with-$1-libs=DIR $1 libraries in DIR])
])
libtse3requ="yes"
AC_ARG_WITH(libtse3,[ --with-libtse3 (default) the new library by Pete Goodliffe <pete.goodliffe@pace.co.uk>)])
AC_NEW_ARG(libtse3)
AC_ARG_WITH(libkmid,[ --with-libkmid use libkmid instead of libtse3 (not all features available, see README)])
AC_NEW_ARG(libkmid)
AC_ARG_WITH(libs,[ --without-libs without any library (cause machine depencies, not all features available, see README)])
AC_ARG_WITH(oldlily,[ --with-oldlily use LilyPond 1.2.17 syntax to export])
AC_ARG_WITH(anthem,[ --with-anthem=DIR produce Anthem plugin, DIR=Athem source directory])
AC_ARG_WITH(fadein,[ --without-fadein say \"--without-fadein\" if (de)crescendo gives unexpected results])
AC_ARG_WITH(arts,[ --without-arts say \"--without-arts\" if you never want to create an aRts scheduler])
AC_ARG_WITH(printing,[ --without-printing say \"--without-printing\" for disabling print preview and printing support])
if test "X$USE_EXCEPTIONS" = "X"
then
echo ""
echo "########################################################"
echo "# Your compiler does not support \"-fexceptions\" option #"
echo "# This will probably cause problems during compilation #"
echo "# of \"midimapper.cpp\" file. #"
echo "########################################################"
echo ""
fi
echo -n "Testing compiler version ... "
rm -f compvers.cc compvers.o compvers
cat >compvers.cc << EOF
#include <stdio.h>
main() {
char *v = __VERSION__;
printf("%c", *v);
}
EOF
${CXX} compvers.cc -o compvers
if test $? -ne 0
then
echo "Cannot compile a simple C++ program! See compvers.cc"
exit
fi
ccversion=`./compvers`
if test $? -ne 0
then
echo "Cannot run a simple C++ program! See compvers.cc"
exit
fi
echo "$ccversion"
${CXX} compvers.cc -o compvers
if test "X$ccversion" = "X2"
then
AC_DEFINE(GCC_MAJ_VERS, 2, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
elif test "X$ccversion" = "X3"
then
AC_DEFINE(GCC_MAJ_VERS, 3, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
elif test "X$ccversion" = "X4"
then
AC_DEFINE(GCC_MAJ_VERS, 4, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
else
echo ""
echo "Cannot determine g++ version"
echo "Check your compiler installation or"
echo "try to find out why \"./compvers\" doesn't"
echo "supply \"2\", \"3\" or \"4\"!"
echo ""
exit
fi
rm -f kde_qttest.cpp
cat >kde_qttest.cpp << EOF
#include <kapp.h>
#include <qglobal.h>
#if KDE_VERSION >= 290
#if QT_VERSION < 300
#error "you cannot use KDE3 together with QT < 3! Please check QTDIR environment variable or use configure --with-qt-dir="
#endif
#else
#if QT_VERSION >= 300
#error "you cannot use KDE2 together with QT >= 3! Please check QTDIR environment variable or use configure --with-qt-dir="
#endif
#endif
EOF
${CXX} -c kde_qttest.cpp -I$qt_includes -I$kde_includes
if test $? -ne 0
then
echo ""
echo "There seems to be a KDE <--> Qt version conflict."
echo "Please check the configure parameters. Set the"
echo "enviroment variable QTDIR or use the configure option"
echo "\"--with-qt-libs=\" and \"--with-qt-libs-includes\""
echo ""
echo "Note further: If you have different KDE/Qt versions make"
echo "sure the PATH variable only references the KDE/Qt version"
echo "you wish to use for NoteEdit!"
echo ""
rm -f kde_qttest.cpp
exit
fi
rm -f kde_qttest.cpp
if test "X$with_fadein" != "Xno"
then
AC_DEFINE(WITH_FADE_IN, 1, [disable fade in/out for (de)cresendo])
fi
AC_PROG_YACC
YACC="$YACC -d"
rm -f yacctest.y y.tab.c
cat >yacctest.y << EOF
%token Y_A
%%
start: Y_A
;
%%
EOF
$YACC yacctest.y 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo "Cannot run a simple YACC/Bison program. Perhaps YACC/Bison isn't"
echo "installed? Please install! Or check why:"
echo ""
echo " $YACC yacctest.y"
echo ""
echo "doesn't work!"
echo ""
exit
fi
rm -f yacctest.y y.tab.c
LEX=""
AM_PROG_LEX
if test "X$LEX" = "X"
then
echo "This packages needs lex or flex! Please install!"
exit
fi
rm -f noteeditlextest.l noteeditlextest.c noteeditlextest
cat >noteeditlextest.l << EOF
%%
a return 2;
%%
int yywrap() {return 1;}
main() {
int a = yylineno;
}
EOF
$LEX -t noteeditlextest.l > noteeditlextest.c
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Perhaps (f)lex isn't installed!"
echo "Please install or find out why why"
echo ""
echo " $MYLEX -t noteeditlextest.l"
echo ""
echo "doesn't work!"
exit
fi
${CC} -o noteeditlextest noteeditlextest.c 2>/dev/null > /dev/null
if test $? -ne 0
then
$LEX -l -t noteeditlextest.l > noteeditlextest.c
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Please find out why"
echo ""
echo " $MYLEX -l -t noteeditlextest.l"
echo ""
echo "doesn't work!"
exit
fi
${CC} -o noteeditlextest noteeditlextest.c 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Please find out why"
echo ""
echo " $MYLEX -l -t noteeditlextest.l >noteeditlextest.c"
echo " cc -o noteeditlextest noteeditlextest.c"
echo ""
echo "doesn't work!"
exit
fi
LEX="$LEX -l"
fi
rm -f noteeditlextest.l noteeditlextest.c noteeditlextest
if test "$with_libs" = "no" -o "$with_libkmid" = "yes"
then
libtse3requ="no"
fi
printingreq="yes"
if test "X$with_printing" = "Xno"
then
printingreq="no"
fi
if test "X$with_libtse3_include" = "X"
then
with_libtse3_include=$stdincdirs
fi
if test "X$with_libtse3_libs" = "X"
then
with_libtse3_libs=$stdlibdirs
fi
if test "$libtse3requ" = "yes"
then
FIND_PACKAGE(libtse3, tse3, tse3/TSE3.h, $with_libtse3_libs, $with_libtse3_include)
if test "X$lib_libtse3" = "X" -o "X$inc_libtse3" = "X"
then
echo ""
echo "libtse3 not found! Please install!"
echo "If you have installed libtse3 in an unusual directory"
echo "use \"--with-libtse3-include=\" and/or \"--with-libtse3-libs=\""
echo ""
echo "There are options to bypass libtse3! But this causes some"
echo "restrictions; see README"
echo ""
exit
fi
cat >tse3vtest.cc << EOF
#include <iostream>
#include <tse3/TSE3.h>
int main() {
std::cout << TSE3::TSE3_Version() << std::endl;
return 0;
}
EOF
${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo " ERROR: TSE3 found but unable to link a simple TSE3 example!"
echo " Please see example file \"tse3vtest.cc\" and try to find out"
echo " why it doesn't compile using the following command:"
echo " ${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 -Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest"
echo ""
exit
fi
changequote(<<, >>)dnl
VERS=`./tse3vtest`
changequote([, ])dnl
tse_maj=`echo $VERS | sed -e 's/^\(.*\)\..*\..*$/\1/'`
tse_mid=`echo $VERS | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
tse_min=`echo $VERS | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
if test "X$VERS" = "X"
then
echo " ERROR: TSE3 found but unable to run a simple TSE3 example!"
echo " Please see example file \"tse3vtest.cc\" and try to find out"
echo " why it doesn't run, compiled with:"
echo " ${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 -Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest"
exit
fi
if test "$tse_maj" -eq 0 -a "$tse_mid" -eq 2 -a "$tse_min" -lt 3
then
echo ""
echo " Excuse: NoteEdit cannot deal with tse3-0.2.$tse_min Please use"
echo " tse-0.2.3 or later"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo ""
rm -f tse3vtest tse3vtest.cc
exit
fi
if test "$tse_mid" -lt 2
then
echo ""
echo " !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo " I found tse3-$tse_maj.$tse_mid.$tse_min"
echo " It works. But you should think about update. Probably future versions"
echo " of NoteEdit will require tse3-0.2.x"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo " !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo ""
fi
if test "$tse_maj" -lt 0 -o "$tse_mid" -lt 1 -o \( "$tse_mid" -lt 2 -a "$tse_min" -lt 2 \)
then
echo ""
echo " ERROR: TSE3 $VERS found but this version of \"noteedit\" needs >= TSE3-0.1.2"
echo " or later. But NOT tse3-0.2.0!!!"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo ""
rm -f tse3vtest tse3vtest.cc
exit
fi
rm -f tse3vtest tse3vtest.cc
TSE3INCLUDE="-I$inc_libtse3"
TSE3LIBS="-L$lib_libtse3 -ltse3"
if test "$tse_mid" -gt 1
then
AC_DEFINE(TSE3_MID_VERSION_NR, 2, [the middle version number of TSE3])
else
AC_DEFINE(TSE3_MID_VERSION_NR, 1, [the middle version number of TSE3])
fi
if test "$with_arts" != "no"
then
echo -n "checking for TSE3 with aRts ..."
if test "$tse_mid" -gt 1
then
cat >tse3vtest2.cc << EOF
#include <tse3/plt/Factory.h>
#include <tse3/plt/Arts.h>
int main() {
TSE3::MidiSchedulerFactory theFactory_;
TSE3::MidiScheduler *theScheduler_;
TSE3::Plt::UnixMidiSchedulerFactory::setPreferredPlatform(TSE3::Plt::UnixMidiSchedulerFactory::UnixPlatform_Alsa);
theScheduler_ = theFactory_.createScheduler();
return 0;
}
EOF
else
cat >tse3vtest2.cc << EOF
#include <tse3/plt/Arts.h>
int main() {
TSE3::Plt::ArtsMidiSchedulerFactory theARtsFactory_;
TSE3::MidiScheduler *theScheduler_;
theScheduler_ = theARtsFactory_.createScheduler();
return 0;
}
EOF
fi
${CXX} -W -Wall -ansi -pedantic -g tse3vtest2.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest2 2>/dev/null > /dev/null
if test $? -ne 0
then
echo " no"
echo "${CXX} -W -Wall -ansi -pedantic -g tse3vtest2.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest2"
else
echo " yes"
AC_DEFINE(TSE3_HAS_ARTS, 1, [Define if TSE3 has an aRts MIDI scheduler])
fi
fi
rm -f tse3vtest tse3vtest.cc
fi
if test "$with_libs" = "no"
then
echo ""
echo "This produces the version without any library. Please note:"
echo " This causes some restrictions; see README"
echo ""
fi
if test "$with_libkmid" = "yes"
then
if test "X$with_libkmid_include" = "X"
then
with_libkmid_include=$stdincdirs
fi
if test "X$with_libkmid_libs" = "X"
then
with_libkmid_libs=$stdlibdirs
fi
AC_DEFINE(WITH_LIBKMID, 1, [Define if you want to use libkmid instead of libtse3])
FIND_PACKAGE(libkmid, kmid, libkmid/libkmid.h, $with_libkmid_libs, $with_libkmid_include)
if test "X$lib_libkmid" = "X" -o "X$inc_libkmid" = "X"
then
echo ""
echo "libkmid not found! Please install!"
echo "There are options to bypass all libs! But this causes some"
echo "restrictions; see README"
echo ""
exit
fi
echo ""
echo "This produces the version with libkmid. Please note:"
echo " This causes some restrictions; see README"
echo ""
KMIDINCLUDE="-I$inc_libkmid"
KMIDLIBS="-L$lib_libkmid -lkmid"
fi
if test "$printingreq" = "yes"
then
AC_DEFINE(WITH_DIRECT_PRINTING, 1, [enable print preview and printing support])
fi
if test "$libtse3requ" = "yes"
then
AC_DEFINE(WITH_TSE3, 1, [Define if libtse3 present])
fi
if test "$with_oldlily" = "yes"
then
AC_DEFINE(WITH_OLDLILY, 1, [Define if old lily present])
fi
if test $with_anthem
then
if test "X$lib_libtse3" = "X" -o "X$inc_libtse3" = "X"
then
echo "Anthem plugin requires TSE3 library!"
exit
fi
if test ! \( -f $with_anthem/anthem/phraseeditors/PhraseEditor.h \)
then
echo "File $with_anthem/anthem/phraseeditors/PhraseEditor.h"
echo does not exist!
exit
fi
AC_DEFINE(ANTHEM_PLUGIN, 1, [Define if old lily present])
ANTHEMINCLUDE=-I$with_anthem
fi
if test "$kde_qtver" = "3"
then
echo "cp noteedit/lyrics.ui.qt3 noteedit/lyrics.ui"
cp noteedit/lyrics.ui.qt3 noteedit/lyrics.ui
echo "cp kguitar_excerpt/fingerlist.h.qt3 kguitar_excerpt/fingerlist.h"
cp kguitar_excerpt/fingerlist.h.qt3 kguitar_excerpt/fingerlist.h
else
echo "cp noteedit/lyrics.ui.qt2 noteedit/lyrics.ui"
cp noteedit/lyrics.ui.qt2 noteedit/lyrics.ui
echo "cp kguitar_excerpt/fingerlist.h.qt2 kguitar_excerpt/fingerlist.h"
cp kguitar_excerpt/fingerlist.h.qt2 kguitar_excerpt/fingerlist.h
fi
LEX_PREFIX="NEDIT"
LEX_RESTART="${LEX_PREFIX}restart"
LEX_LINENO="${LEX_PREFIX}lineno"
YACC_PARSE="${LEX_PREFIX}parse"
YACC_LVAL="${LEX_PREFIX}lval"
if test "X$kde_use_final" != "Xno"
then
SPECIAL_FLAGS_FOR_FINAL="\$(PREFIX_DEF) \$(USE_EXCEPTIONS)"
else
SPECIAL_FLAGS_FOR_FINAL=""
fi
dnl PACKAGE set before
AC_SUBST(SPECIAL_FLAGS_FOR_FINAL)
AC_SUBST(LEX)
AC_SUBST(YACC)
AC_SUBST(LEX_PREFIX)
AC_SUBST(LEX_RESTART)
AC_SUBST(LEX_LINENO)
AC_SUBST(YACC_PARSE)
AC_SUBST(YACC_LVAL)
AC_SUBST(ANTHEMINCLUDE)
AC_SUBST(TSE3INCLUDE)
AC_SUBST(TSE3LIBS)
AC_SUBST(KMIDINCLUDE)
AC_SUBST(KMIDLIBS)
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/de/Makefile ])
AC_CONFIG_FILES([ doc/noteedit/Makefile ])
AC_CONFIG_FILES([ kguitar_excerpt/Makefile ])
AC_CONFIG_FILES([ noteedit/Makefile ])
AC_CONFIG_FILES([ noteedit/icons/Makefile ])
AC_CONFIG_FILES([ noteedit/resources/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_OUTPUT
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi
Les lignes que le patch modifie :
--- configure.in.orig 2011-08-05 11:30:49.963095223 +0000
+++ configure.in 2011-08-05 11:40:31.753781071 +0000
@@ -332,10 +332,10 @@
fi
cat >tse3vtest.cc << EOF
-#include <istream.h>
+#include <iostream>
#include <tse3/TSE3.h>
int main() {
- cout << TSE3::TSE3_Version() << endl;
+ std::cout << TSE3::TSE3_Version() << std::endl;
return 0;
}
EOF
configure.in.in :
#MIN_CONFIG(3.0.0)
stdlibdirs="/usr/lib /usr/local/lib /usr/X11/lib /usr/X11R6/lib"
stdincdirs="/usr/include /usr/local/include /usr/X11/include /usr/X11R6/lib"
dnl
dnl FIND_PACKAGE(<name>, <libname>, <includename>,<libdirs>,<incldirs>)
dnl
AC_DEFUN(FIND_PACKAGE,[
echo -n "checking $1... "
for dir in $4
do
if test -f $dir/lib$2.so || test -f $dir/lib$2.a
then
lib_$1=$dir
break
fi
done
for dir in $5
do
if test -f $dir/$3
then
inc_$1=$dir
break
fi
done
echo "libs in $lib_$1; includes in $inc_$1"
])
dnl
dnl AC_NEW_ARG(<arg-name>)
dnl
AC_DEFUN(AC_NEW_ARG,[
AC_ARG_WITH($1-include,[ --with-$1-include=DIR $1 headers in DIR])
AC_ARG_WITH($1-libs,[ --with-$1-libs=DIR $1 libraries in DIR])
])
libtse3requ="yes"
AC_ARG_WITH(libtse3,[ --with-libtse3 (default) the new library by Pete Goodliffe <pete.goodliffe@pace.co.uk>)])
AC_NEW_ARG(libtse3)
AC_ARG_WITH(libkmid,[ --with-libkmid use libkmid instead of libtse3 (not all features available, see README)])
AC_NEW_ARG(libkmid)
AC_ARG_WITH(libs,[ --without-libs without any library (cause machine depencies, not all features available, see README)])
AC_ARG_WITH(oldlily,[ --with-oldlily use LilyPond 1.2.17 syntax to export])
AC_ARG_WITH(anthem,[ --with-anthem=DIR produce Anthem plugin, DIR=Athem source directory])
AC_ARG_WITH(fadein,[ --without-fadein say \"--without-fadein\" if (de)crescendo gives unexpected results])
AC_ARG_WITH(arts,[ --without-arts say \"--without-arts\" if you never want to create an aRts scheduler])
AC_ARG_WITH(printing,[ --without-printing say \"--without-printing\" for disabling print preview and printing support])
if test "X$USE_EXCEPTIONS" = "X"
then
echo ""
echo "########################################################"
echo "# Your compiler does not support \"-fexceptions\" option #"
echo "# This will probably cause problems during compilation #"
echo "# of \"midimapper.cpp\" file. #"
echo "########################################################"
echo ""
fi
echo -n "Testing compiler version ... "
rm -f compvers.cc compvers.o compvers
cat >compvers.cc << EOF
#include <stdio.h>
main() {
char *v = __VERSION__;
printf("%c", *v);
}
EOF
${CXX} compvers.cc -o compvers
if test $? -ne 0
then
echo "Cannot compile a simple C++ program! See compvers.cc"
exit
fi
ccversion=`./compvers`
if test $? -ne 0
then
echo "Cannot run a simple C++ program! See compvers.cc"
exit
fi
echo "$ccversion"
${CXX} compvers.cc -o compvers
if test "X$ccversion" = "X2"
then
AC_DEFINE(GCC_MAJ_VERS, 2, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
elif test "X$ccversion" = "X3"
then
AC_DEFINE(GCC_MAJ_VERS, 3, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
elif test "X$ccversion" = "X4"
then
AC_DEFINE(GCC_MAJ_VERS, 4, [main version number of gcc])
rm -f compvers.cc compvers.o compvers
else
echo ""
echo "Cannot determine g++ version"
echo "Check your compiler installation or"
echo "try to find out why \"./compvers\" doesn't"
echo "supply \"2\", \"3\" or \"4\"!"
echo ""
exit
fi
rm -f kde_qttest.cpp
cat >kde_qttest.cpp << EOF
#include <kapp.h>
#include <qglobal.h>
#if KDE_VERSION >= 290
#if QT_VERSION < 300
#error "you cannot use KDE3 together with QT < 3! Please check QTDIR environment variable or use configure --with-qt-dir="
#endif
#else
#if QT_VERSION >= 300
#error "you cannot use KDE2 together with QT >= 3! Please check QTDIR environment variable or use configure --with-qt-dir="
#endif
#endif
EOF
${CXX} -c kde_qttest.cpp -I$qt_includes -I$kde_includes
if test $? -ne 0
then
echo ""
echo "There seems to be a KDE <--> Qt version conflict."
echo "Please check the configure parameters. Set the"
echo "enviroment variable QTDIR or use the configure option"
echo "\"--with-qt-libs=\" and \"--with-qt-libs-includes\""
echo ""
echo "Note further: If you have different KDE/Qt versions make"
echo "sure the PATH variable only references the KDE/Qt version"
echo "you wish to use for NoteEdit!"
echo ""
rm -f kde_qttest.cpp
exit
fi
rm -f kde_qttest.cpp
if test "X$with_fadein" != "Xno"
then
AC_DEFINE(WITH_FADE_IN, 1, [disable fade in/out for (de)cresendo])
fi
AC_PROG_YACC
YACC="$YACC -d"
rm -f yacctest.y y.tab.c
cat >yacctest.y << EOF
%token Y_A
%%
start: Y_A
;
%%
EOF
$YACC yacctest.y 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo "Cannot run a simple YACC/Bison program. Perhaps YACC/Bison isn't"
echo "installed? Please install! Or check why:"
echo ""
echo " $YACC yacctest.y"
echo ""
echo "doesn't work!"
echo ""
exit
fi
rm -f yacctest.y y.tab.c
LEX=""
AM_PROG_LEX
if test "X$LEX" = "X"
then
echo "This packages needs lex or flex! Please install!"
exit
fi
rm -f noteeditlextest.l noteeditlextest.c noteeditlextest
cat >noteeditlextest.l << EOF
%%
a return 2;
%%
int yywrap() {return 1;}
main() {
int a = yylineno;
}
EOF
$LEX -t noteeditlextest.l > noteeditlextest.c
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Perhaps (f)lex isn't installed!"
echo "Please install or find out why why"
echo ""
echo " $MYLEX -t noteeditlextest.l"
echo ""
echo "doesn't work!"
exit
fi
${CC} -o noteeditlextest noteeditlextest.c 2>/dev/null > /dev/null
if test $? -ne 0
then
$LEX -l -t noteeditlextest.l > noteeditlextest.c
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Please find out why"
echo ""
echo " $MYLEX -l -t noteeditlextest.l"
echo ""
echo "doesn't work!"
exit
fi
${CC} -o noteeditlextest noteeditlextest.c 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo "ERROR: Lex does not work! Please find out why"
echo ""
echo " $MYLEX -l -t noteeditlextest.l >noteeditlextest.c"
echo " cc -o noteeditlextest noteeditlextest.c"
echo ""
echo "doesn't work!"
exit
fi
LEX="$LEX -l"
fi
rm -f noteeditlextest.l noteeditlextest.c noteeditlextest
if test "$with_libs" = "no" -o "$with_libkmid" = "yes"
then
libtse3requ="no"
fi
printingreq="yes"
if test "X$with_printing" = "Xno"
then
printingreq="no"
fi
if test "X$with_libtse3_include" = "X"
then
with_libtse3_include=$stdincdirs
fi
if test "X$with_libtse3_libs" = "X"
then
with_libtse3_libs=$stdlibdirs
fi
if test "$libtse3requ" = "yes"
then
FIND_PACKAGE(libtse3, tse3, tse3/TSE3.h, $with_libtse3_libs, $with_libtse3_include)
if test "X$lib_libtse3" = "X" -o "X$inc_libtse3" = "X"
then
echo ""
echo "libtse3 not found! Please install!"
echo "If you have installed libtse3 in an unusual directory"
echo "use \"--with-libtse3-include=\" and/or \"--with-libtse3-libs=\""
echo ""
echo "There are options to bypass libtse3! But this causes some"
echo "restrictions; see README"
echo ""
exit
fi
cat >tse3vtest.cc << EOF
#include <iostream>
#include <tse3/TSE3.h>
int main() {
std::cout << TSE3::TSE3_Version() << std::endl;
return 0;
}
EOF
${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest 2>/dev/null > /dev/null
if test $? -ne 0
then
echo ""
echo " ERROR: TSE3 found but unable to link a simple TSE3 example!"
echo " Please see example file \"tse3vtest.cc\" and try to find out"
echo " why it doesn't compile using the following command:"
echo " ${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 -Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest"
echo ""
exit
fi
changequote(<<, >>)dnl
VERS=`./tse3vtest`
changequote([, ])dnl
tse_maj=`echo $VERS | sed -e 's/^\(.*\)\..*\..*$/\1/'`
tse_mid=`echo $VERS | sed -e 's/^.*\.\(.*\)\..*$/\1/'`
tse_min=`echo $VERS | sed -e 's/^.*\..*\.\(.*\)$/\1/'`
if test "X$VERS" = "X"
then
echo " ERROR: TSE3 found but unable to run a simple TSE3 example!"
echo " Please see example file \"tse3vtest.cc\" and try to find out"
echo " why it doesn't run, compiled with:"
echo " ${CXX} -W -Wall -ansi -pedantic -g tse3vtest.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 -Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest"
exit
fi
if test "$tse_maj" -eq 0 -a "$tse_mid" -eq 2 -a "$tse_min" -lt 3
then
echo ""
echo " Excuse: NoteEdit cannot deal with tse3-0.2.$tse_min Please use"
echo " tse-0.2.3 or later"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo ""
rm -f tse3vtest tse3vtest.cc
exit
fi
if test "$tse_mid" -lt 2
then
echo ""
echo " !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo " I found tse3-$tse_maj.$tse_mid.$tse_min"
echo " It works. But you should think about update. Probably future versions"
echo " of NoteEdit will require tse3-0.2.x"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo " !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
echo ""
fi
if test "$tse_maj" -lt 0 -o "$tse_mid" -lt 1 -o \( "$tse_mid" -lt 2 -a "$tse_min" -lt 2 \)
then
echo ""
echo " ERROR: TSE3 $VERS found but this version of \"noteedit\" needs >= TSE3-0.1.2"
echo " or later. But NOT tse3-0.2.0!!!"
echo " See http://TSE3.sourceforge.net for downloading newer versions of TSE3"
echo ""
rm -f tse3vtest tse3vtest.cc
exit
fi
rm -f tse3vtest tse3vtest.cc
TSE3INCLUDE="-I$inc_libtse3"
TSE3LIBS="-L$lib_libtse3 -ltse3"
if test "$tse_mid" -gt 1
then
AC_DEFINE(TSE3_MID_VERSION_NR, 2, [the middle version number of TSE3])
else
AC_DEFINE(TSE3_MID_VERSION_NR, 1, [the middle version number of TSE3])
fi
if test "$with_arts" != "no"
then
echo -n "checking for TSE3 with aRts ..."
if test "$tse_mid" -gt 1
then
cat >tse3vtest2.cc << EOF
#include <tse3/plt/Factory.h>
#include <tse3/plt/Arts.h>
int main() {
TSE3::MidiSchedulerFactory theFactory_;
TSE3::MidiScheduler *theScheduler_;
TSE3::Plt::UnixMidiSchedulerFactory::setPreferredPlatform(TSE3::Plt::UnixMidiSchedulerFactory::UnixPlatform_Alsa);
theScheduler_ = theFactory_.createScheduler();
return 0;
}
EOF
else
cat >tse3vtest2.cc << EOF
#include <tse3/plt/Arts.h>
int main() {
TSE3::Plt::ArtsMidiSchedulerFactory theARtsFactory_;
TSE3::MidiScheduler *theScheduler_;
theScheduler_ = theARtsFactory_.createScheduler();
return 0;
}
EOF
fi
${CXX} -W -Wall -ansi -pedantic -g tse3vtest2.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest2 2>/dev/null > /dev/null
if test $? -ne 0
then
echo " no"
echo "${CXX} -W -Wall -ansi -pedantic -g tse3vtest2.cc -I$inc_libtse3 -I$kde_includes -L$lib_libtse3 \
-Wl,-rpath $lib_libtse3 -ltse3 -L$kde_libraries -Wl,-rpath $kde_libraries -lpthread -o tse3vtest2"
else
echo " yes"
AC_DEFINE(TSE3_HAS_ARTS, 1, [Define if TSE3 has an aRts MIDI scheduler])
fi
fi
rm -f tse3vtest tse3vtest.cc
fi
if test "$with_libs" = "no"
then
echo ""
echo "This produces the version without any library. Please note:"
echo " This causes some restrictions; see README"
echo ""
fi
if test "$with_libkmid" = "yes"
then
if test "X$with_libkmid_include" = "X"
then
with_libkmid_include=$stdincdirs
fi
if test "X$with_libkmid_libs" = "X"
then
with_libkmid_libs=$stdlibdirs
fi
AC_DEFINE(WITH_LIBKMID, 1, [Define if you want to use libkmid instead of libtse3])
FIND_PACKAGE(libkmid, kmid, libkmid/libkmid.h, $with_libkmid_libs, $with_libkmid_include)
if test "X$lib_libkmid" = "X" -o "X$inc_libkmid" = "X"
then
echo ""
echo "libkmid not found! Please install!"
echo "There are options to bypass all libs! But this causes some"
echo "restrictions; see README"
echo ""
exit
fi
echo ""
echo "This produces the version with libkmid. Please note:"
echo " This causes some restrictions; see README"
echo ""
KMIDINCLUDE="-I$inc_libkmid"
KMIDLIBS="-L$lib_libkmid -lkmid"
fi
if test "$printingreq" = "yes"
then
AC_DEFINE(WITH_DIRECT_PRINTING, 1, [enable print preview and printing support])
fi
if test "$libtse3requ" = "yes"
then
AC_DEFINE(WITH_TSE3, 1, [Define if libtse3 present])
fi
if test "$with_oldlily" = "yes"
then
AC_DEFINE(WITH_OLDLILY, 1, [Define if old lily present])
fi
if test $with_anthem
then
if test "X$lib_libtse3" = "X" -o "X$inc_libtse3" = "X"
then
echo "Anthem plugin requires TSE3 library!"
exit
fi
if test ! \( -f $with_anthem/anthem/phraseeditors/PhraseEditor.h \)
then
echo "File $with_anthem/anthem/phraseeditors/PhraseEditor.h"
echo does not exist!
exit
fi
AC_DEFINE(ANTHEM_PLUGIN, 1, [Define if old lily present])
ANTHEMINCLUDE=-I$with_anthem
fi
if test "$kde_qtver" = "3"
then
echo "cp noteedit/lyrics.ui.qt3 noteedit/lyrics.ui"
cp noteedit/lyrics.ui.qt3 noteedit/lyrics.ui
echo "cp kguitar_excerpt/fingerlist.h.qt3 kguitar_excerpt/fingerlist.h"
cp kguitar_excerpt/fingerlist.h.qt3 kguitar_excerpt/fingerlist.h
else
echo "cp noteedit/lyrics.ui.qt2 noteedit/lyrics.ui"
cp noteedit/lyrics.ui.qt2 noteedit/lyrics.ui
echo "cp kguitar_excerpt/fingerlist.h.qt2 kguitar_excerpt/fingerlist.h"
cp kguitar_excerpt/fingerlist.h.qt2 kguitar_excerpt/fingerlist.h
fi
LEX_PREFIX="NEDIT"
LEX_RESTART="${LEX_PREFIX}restart"
LEX_LINENO="${LEX_PREFIX}lineno"
YACC_PARSE="${LEX_PREFIX}parse"
YACC_LVAL="${LEX_PREFIX}lval"
if test "X$kde_use_final" != "Xno"
then
SPECIAL_FLAGS_FOR_FINAL="\$(PREFIX_DEF) \$(USE_EXCEPTIONS)"
else
SPECIAL_FLAGS_FOR_FINAL=""
fi
AM_INIT_AUTOMAKE(noteedit, 2.8.1)
AC_SUBST(SPECIAL_FLAGS_FOR_FINAL)
AC_SUBST(LEX)
AC_SUBST(YACC)
AC_SUBST(LEX_PREFIX)
AC_SUBST(LEX_RESTART)
AC_SUBST(LEX_LINENO)
AC_SUBST(YACC_PARSE)
AC_SUBST(YACC_LVAL)
AC_SUBST(ANTHEMINCLUDE)
AC_SUBST(TSE3INCLUDE)
AC_SUBST(TSE3LIBS)
AC_SUBST(KMIDINCLUDE)
AC_SUBST(KMIDLIBS)
Le patch :
--- configure.in.in.orig 2011-08-05 18:42:07.481777005 +0000
+++ configure.in.in 2011-08-05 18:46:14.379673045 +0000
@@ -275,10 +275,10 @@
fi
cat >tse3vtest.cc << EOF
-#include <istream.h>
+#include <iostream>
#include <tse3/TSE3.h>
int main() {
- cout << TSE3::TSE3_Version() << endl;
+ std::cout << TSE3::TSE3_Version() << std::endl;
return 0;
}
EOF
Après, j'ai fait des patches sur le code (.cpp), qui corrigent cette même entrée avec " <iostream> " mais ils ne s'appliquent pas ! Il faut corriger cela partout pour que ça marche (c'est ce que je crois avoir compris des patches de SuSE). Si je fais fausse route, n'hésite pas à m'arrêter !!
Je crois qu'il y a une histoire d'encodage des caractères utf8 à inclure (encore un patch !!)
a appliquer sur mainframewidget.cpp ???? Si ce n'est pas ça, dites le moi, avant que je continue !!!
Chez SuSe c'est ce correctif :
Index: noteedit/mainframewidget.cpp
===================================================================
--- noteedit/mainframewidget.cpp.orig
+++ noteedit/mainframewidget.cpp
@@ -3893,6 +3893,7 @@ void NMainFrameWidget::exportABCImm() {
abcOpts.exprAbove = false;
abcOpts.scale = 75;
abcOpts.measNumInBox = false;
+ abcOpts.useUtf8Encoding = true;
exportDialog_->setABCOptions(abcOpts);
NABCExport abc;
QRegExp notSuff(".not$");
Merci pour ta patience avec moi !!!