lenteur démarrage

C2G9 · 14 mai 2011

Bonjour
je viens d'installer F15 sur mon EeePC. Installation avec une clé USB faite avec Fedora LiveUSB Creator. Tout c'est bien passé à l'installation par contre, j'ai un soucis de lenteur au lancement de la machine. Celle-ci met environ 1 mn 30 à 2 mn pour afficher l'écran de connexion utilisateur. En appuyant sur la touche Échap au lancement, je vois que ça bloque sur

Started setup Virtual console

puis sur

Starred LSB Start and stop sendmail

Vous avez une idée du pourquoi de la chose?

Merci

elle a l'air bien cette F15 🙂

tsly · 28 mai 2011

salut!

j'ai également les mêmes symptômes que toi sur mon eeepc 1000HD...
as-tu trouvé une parade à cette longue attente... 🙂

C2G9 · 28 mai 2011

Salut
non je n'ai rien trouvé. La clé USB a été faite avec une version beta. Je réessaierai avec la version définitive quand j'aurais un moment.

tsly · 29 mai 2011

Pour ma part, j'ai réussi à desactiver sendmail (et d'autres services inutiles...) comme ceci :

# systemctl stop sendmail.service
# systemctl disable sendmail.service

Par contre c'est encore assez lent au démarrage...

Dans /var/log/boot.log j'ai l'impression qu'il me fait un fsck de tout mon disque à chaque démarrage...

Starting File System Check on /dev/disk/by-uuid/c37d128d-0b05-448f-ad17-da0fef333bb1...
systemd-fsck[604]: /dev/sda1: clean, 84/128016 files, 67401/512000 blocks
Started File System Check on /dev/disk/by-uuid/c37d128d-0b05-448f-ad17-da0fef333bb1.

Je continue mes investigations et ne manquerai pas de revenir poster... si je trouve quelque chose d'utile...
@+

Tom.

TuXFire · 29 mai 2011

Même problème sur eeepc 701, alors que sur plusieurs autres pc ça boot rapidement...

tsly · 29 mai 2011

@TuXFire : pourrais-tu comparer les 2 log /var/log/boot.log de chaque pc (eeepc et un autre...)
ou les poster pour pouvoir comparer...

le eeepc execute-t-il fsck a chaque demarrage ?

merci

On finira bien par trouver...

TuXFire · 29 mai 2011

mon eeepc 701:

cat /var/log/boot.log 

Welcome to Fedora release 15 (Lovelock)!

Starting Collect Read-Ahead Data...
Started Replay Read-Ahead Data.
Starting Bootup hack...
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge.
Started Lock Directory.
Starting Media Directory...
Started Runtime Directory.
Started Collect Read-Ahead Data.
Started Load legacy module configuration.
Started File System Check on Root Device.
Starting Remount Root FS...
Starting Remount API VFS...
Started Load Kernel Modules.
Started Set Up Additional Binary Formats.
Starting Apply Kernel Variables...
Starting Setup Virtual Console...
Starting Apply System Clock UTC Offset...
Starting Stdio Syslog Bridge...
Started Stdio Syslog Bridge.
Started Bootup hack.
Started Apply Kernel Variables.
Started Media Directory.
Started Apply System Clock UTC Offset.
Starting udev Kernel Device Manager...
Started Remount Root FS.
Starting Configure read-only root support...
Started Remount API VFS.
Started Setup Virtual Console.
Started Configure read-only root support.
Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
Started udev Kernel Device Manager.
Starting /dev/disk/by-uuid/9fae377c-0295-4d46-9008-254116f1ea71...
Started /dev/disk/by-uuid/9fae377c-0295-4d46-9008-254116f1ea71.
Started udev Wait for Complete Device Initialization.
Starting Wait for storage scan...
Started Show Plymouth Boot Screen.
Started Wait for storage scan.
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Started Mark the need to relabel after reboot.
Starting Enable all detected swap partitions...
Started Relabel all filesystems, if necessary.
Started Reconfigure the system on administrator request.
Starting Load Random Seed...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Recreate Volatile Files and Directories...
Started Load Random Seed.
Started Tell Plymouth To Write Out Runtime Data.
Started Enable all detected swap partitions.
Started Recreate Volatile Files and Directories.
Starting Console System Startup Logging...
Starting Restore Sound Card State...
Starting Bootup unhack...
Starting Job spooling tools...
Started Job spooling tools.
Starting Network Manager...
Starting Network Time Service...
Started Network Time Service.
Starting Avahi mDNS/DNS-SD Stack...
Starting System Logging Service...
Starting ABRT Automated Bug Reporting Tool...
Starting SYSV: Init script for live image....
Starting Command Scheduler...
Started Command Scheduler.
Starting irqbalance daemon...
Starting Machine Check Exception Logging Daemon...
Starting System Setup Keyboard...
Started System Setup Keyboard.
Starting D-Bus System Message Bus...
Started Console System Startup Logging.
Started Restore Sound Card State.
Started Bootup unhack.
Stopping Syslog Kernel Log Buffer Bridge...
Stopped Syslog Kernel Log Buffer Bridge.
Started System Logging Service.
Started irqbalance daemon.
Started D-Bus System Message Bus.
Started SYSV: Init script for live image..
Started Machine Check Exception Logging Daemon.
Starting SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot.  This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off....
Started Avahi mDNS/DNS-SD Stack.
Started ABRT Automated Bug Reporting Tool.
Started SYSV: sandbox, xguest and other apps that want to use pam_namespace require this script be run at boot.  This service script does not actually run any service but sets up: /var/tmp, /tmp and home directories to be used by these tools. If you do not use sandbox, xguest or pam_namespace you can turn this service off..
Starting LSB: Port reservation utility...
Starting LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting LSB: start and stop ip6tables firewall...
Starting LSB: start and stop iptables firewall...
Starting LSB: Starts and stops login iSCSI daemon....
Started LSB: Port reservation utility.
Started Network Manager.
Started LSB: start and stop iptables firewall.
Started LSB: start and stop ip6tables firewall.
Started LSB: Starts and stops login iSCSI daemon..
Started LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Starting SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog....
Started SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog..
Starting LSB: Installs coredump handler which saves segfault data...
Starting LSB: Starts and stops login and scanning of iSCSI devices....
Starting LSB: processor frequency scaling support...
Starting LSB: Link Layer Discovery Protocol Agent Daemon...
Starting LSB: Mount and unmount network filesystems....
Starting LSB: Start and stop the MD software RAID monitor...
Starting LSB: The CUPS scheduler...
Starting LSB: start and stop sendmail...
Starting LSB: Watches system log for oops messages, creates ABRT dump directories for each oops...
Started LSB: Link Layer Discovery Protocol Agent Daemon.
Started LSB: Installs coredump handler which saves segfault data.
Started LSB: Watches system log for oops messages, creates ABRT dump directories for each oops.
Started LSB: Start and stop the MD software RAID monitor.
Started LSB: processor frequency scaling support.
Started LSB: The CUPS scheduler.
Started LSB: start and stop sendmail.
Started LSB: Starts and stops login and scanning of iSCSI devices..
Started LSB: Mount and unmount network filesystems..
Starting SYSV: Enable monthly update of Smolt...
Starting Permit User Sessions...
Started Permit User Sessions.
Started SYSV: Enable monthly update of Smolt.
Starting SYSV: Late init script for live image....
Starting /etc/rc.local Compatibility...
Started /etc/rc.local Compatibility.
Starting Wait for Plymouth Boot Screen to Quit...
Started SYSV: Late init script for live image..

Mon portable (qui boot normalement):

cat /var/log/boot.log

Welcome to Fedora release 15 (Lovelock)!

Started Load legacy module configuration.
Starting Bootup hack...
Starting Syslog Kernel Log Buffer Bridge...
Started Syslog Kernel Log Buffer Bridge.
Starting Apply Kernel Variables...
Started Set Up Additional Binary Formats.
Started Load Kernel Modules.
Starting udev Kernel Device Manager...
Starting Lock Directory...
Starting Runtime Directory...
Starting Media Directory...
Started File System Check on Root Device.
Starting Remount API VFS...
Starting Remount Root FS...
Starting Setup Virtual Console...
Started Bootup hack.
Started Apply Kernel Variables.
Started Lock Directory.
Started Runtime Directory.
Started Media Directory.
Started Remount API VFS.
Started Remount Root FS.
Starting Configure read-only root support...
Starting Stdio Syslog Bridge...
Started Stdio Syslog Bridge.
Started udev Kernel Device Manager.
Started Setup Virtual Console.
Starting udev Coldplug all Devices...
Started Configure read-only root support.
Started udev Coldplug all Devices.
Starting udev Wait for Complete Device Initialization...
Started udev Kernel Device Manager.
Starting /dev/disk/by-uuid/8ef9eb55-e54c-4f55-ae7b-57a60ff08a10...
Starting File System Check on /dev/disk/by-uuid/86577fba-6ae0-4e9c-a770-0bb92f09bfe2...
Started /dev/disk/by-uuid/8ef9eb55-e54c-4f55-ae7b-57a60ff08a10.
systemd-fsck[696]: /dev/sda3 : propre, 2259/6479872 fichiers, 1426872/25896960 blocs
Started File System Check on /dev/disk/by-uuid/86577fba-6ae0-4e9c-a770-0bb92f09bfe2.
Starting /home...
Started /home.
Started udev Wait for Complete Device Initialization.
Starting Wait for storage scan...
Started Show Plymouth Boot Screen.
Started Wait for storage scan.
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Starting Huge Pages File System...
Started Huge Pages File System.
Starting POSIX Message Queue File System...
Started POSIX Message Queue File System.
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Initialize storage subsystems (RAID, LVM, etc.)...
Started Initialize storage subsystems (RAID, LVM, etc.).
Starting Load Random Seed...
Starting Tell Plymouth To Write Out Runtime Data...
Started Relabel all filesystems, if necessary.
Started Mark the need to relabel after reboot.
Starting Enable all detected swap partitions...
Started Reconfigure the system on administrator request.
Starting Recreate Volatile Files and Directories...
Started Load Random Seed.
Started Tell Plymouth To Write Out Runtime Data.
Started Enable all detected swap partitions.
Started Recreate Volatile Files and Directories.
Starting Bootup unhack...
Starting Console System Startup Logging...
Starting Restore Sound Card State...
Starting SYSV: Init script for live image....
Starting Job spooling tools...
Started Job spooling tools.
Starting System Logging Service...
Starting Avahi mDNS/DNS-SD Stack...
Starting ABRT Automated Bug Reporting Tool...
Starting Network Manager...
Starting Network Time Service...
Started Network Time Service.
Starting Command Scheduler...
Started Command Scheduler.
Starting irqbalance daemon...
Starting Machine Check Exception Logging Daemon...
Starting System Setup Keyboard...
Started System Setup Keyboard.
Starting D-Bus System Message Bus...
Started Bootup unhack.
Started Console System Startup Logging.
Started Restore Sound Card State.
Started SYSV: Init script for live image..
Started irqbalance daemon.
Started Machine Check Exception Logging Daemon.
Starting LSB: start and stop ip6tables firewall...
Starting LSB: Port reservation utility...
Starting LSB: Starts and stops login iSCSI daemon....
Starting LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting LSB: start and stop iptables firewall...
Started D-Bus System Message Bus.
Started LSB: start and stop ip6tables firewall.
Started LSB: Port reservation utility.
Started LSB: start and stop iptables firewall.
Started Avahi mDNS/DNS-SD Stack.
Started ABRT Automated Bug Reporting Tool.
Stopping Syslog Kernel Log Buffer Bridge...
Stopped Syslog Kernel Log Buffer Bridge.
Started System Logging Service.
Starting Bluetooth Manager...
Started Network Manager.
Started LSB: Starts and stops login iSCSI daemon..
Started Bluetooth Manager.
Started LSB: Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Starting SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog....
Started SYSV: This starts the Linux Auditing System Daemon, which collects security related events in a dedicated audit log. If this daemon is turned off, audit events will be sent to syslog..
Starting LSB: Start and stop the MD software RAID monitor...
Starting LSB: The CUPS scheduler...
Starting LSB: Start up the OpenSSH server daemon...
Starting LSB: Starts and stops login and scanning of iSCSI devices....
Starting LSB: start and stop sendmail...
Starting LSB: Mount and unmount network filesystems....
Starting LSB: Installs coredump handler which saves segfault data...
Starting LSB: processor frequency scaling support...
Started LSB: Starts and stops login and scanning of iSCSI devices..
Started LSB: Start and stop the MD software RAID monitor.
Started LSB: Start up the OpenSSH server daemon.
Started LSB: Mount and unmount network filesystems..
Started LSB: Installs coredump handler which saves segfault data.
Starting Permit User Sessions...
Started Permit User Sessions.
Started LSB: processor frequency scaling support.
Started LSB: start and stop sendmail.
Started LSB: The CUPS scheduler.
Starting SYSV: Enable monthly update of Smolt...
Started SYSV: Enable monthly update of Smolt.
Starting SYSV: Late init script for live image....
Starting /etc/rc.local Compatibility...
Started SYSV: Late init script for live image..
Started /etc/rc.local Compatibility.
Starting Wait for Plymouth Boot Screen to Quit...

tsly · 6 juin 2011

hello, toujours pas trouvé comment accélérer le démarrage... faut vraiment que je m'y mette sérieusement...

en attendant, voici quelques commandes pour vous amuser... 😉

[tom@eeepc ~]$ systemd-analyze time > 'systemd-analyze time.txt'
[tom@eeepc ~]$ systemd-analyze blame > 'systemd-analyze blame.txt'
[tom@eeepc ~]$ systemd-analyze plot > 'systemd-analyze plot.svg'

tiré de: http://www.tux-planet.fr/analyser-les-temps-de-demarrage-de-votre-os-avec-systemd/

Startup finished in 2193ms (kernel) + 9648ms (initrd) + 94361ms (userspace) = 106203ms

 20578ms netfs.service
 20302ms iscsi.service
  6367ms lvm2-monitor.service
  3247ms udev-settle.service
  3045ms iscsid.service
  2918ms fedora-storage-init.service
  2877ms NetworkManager.service
  2834ms media.mount
  1725ms plymouth-start.service
  1691ms fedora-storage-init-late.service
  1446ms ip6tables.service
  1429ms cups.service
  1263ms systemd-tmpfiles-setup.service
  1176ms lldpad.service
  1056ms mdmonitor.service
  1048ms cpuspeed.service
  1016ms iptables.service
   915ms portreserve.service
   794ms avahi-daemon.service
   768ms abrt-ccpp.service
   704ms auditd.service
   700ms mcelog.service
   634ms livesys.service
   602ms irqbalance.service
   598ms remount-rootfs.service
   554ms console-kit-daemon.service
   516ms udev-trigger.service
   493ms udev.service
   421ms systemd-vconsole-setup.service
   378ms proc-sys-fs-binfmt_misc.mount
   351ms systemd-remount-api-vfs.service
   325ms console-kit-log-system-start.service
   323ms preload.service
   309ms fedora-readonly.service
   282ms home.mount
   280ms fedora-sysinit-unhack.service
   273ms boot.mount
   259ms rsyslog.service
   241ms fedora-sysinit-hack.service
   211ms bluetooth.service
   193ms dbus.service
   179ms smolt.service
   176ms livesys-late.service
   151ms fedora-wait-storage.service
   146ms systemd-readahead-collect.service
   144ms fedora-autoswap.service
   141ms emergency.service
   131ms systemd-readahead-replay.service
   129ms systemd-binfmt.service
   122ms accounts-daemon.service
   120ms hwclock-load.service
   117ms systemd-sysctl.service
    61ms rc-local.service
    59ms rtkit-daemon.service
    32ms systemd-user-sessions.service

Aalphad · 22 juin 2011

Je viens de l'installer sur un asus f5, j'ai aussi de grosses lenteurs au démarrage. Alors que sue mon toshiba amd64 atlon x2, c'est du tonnere, ça marche impeccable. tous les deux ont ati comme carte graphique. Quelle est la situations de votre coté actuellement? Une solution trouvée? J'ai quelques fois l'écran qui se brouille au démarrage et je suis obligé de redemarrer.

PapsOu · 22 juin 2011

Salut, je suis dans le même cas que vous, mais pas avec un eeepc, avec un fixe assez puissant pourtant...

Proc : AMD Phenom II x4
CM : Asus M4A77T/USB3
Mem : 8 Go DDR3 GSKILL24
CG : AMD Radeon HD 5570
HDD : Western Digital 500 Go 7200 tr/min SATA3

[PapsOu@Fixe ~]$ systemd-analyze time
Startup finished in 2822ms (kernel) + 35930ms (initrd) + 44868ms (userspace) = 83620ms
[PapsOu@Fixe ~]$ systemd-analyze blame
 34038ms udev-settle.service
  5661ms fedora-readonly.service
  2940ms fedora-sysinit-hack.service
  2821ms cups.service
  2329ms mysqld.service
  1832ms media.mount
  1427ms systemd-vconsole-setup.service
  1119ms systemd-readahead-collect.service
  1103ms systemd-readahead-replay.service
   686ms remount-rootfs.service
   618ms systemd-remount-api-vfs.service
   592ms hwclock-load.service
   548ms fedora-storage-init.service
   543ms lvm2-monitor.service
   513ms rsyslog.service
   504ms NetworkManager.service
   477ms abrtd.service
   466ms fedora-storage-init-late.service
   465ms avahi-daemon.service
   322ms systemd-tmpfiles-setup.service
   298ms sendmail.service
   281ms fedora-sysinit-unhack.service
   274ms dbus.service
   270ms console-kit-log-system-start.service
   252ms cpuspeed.service
   246ms acpid.service
   233ms sandbox.service
   202ms rpcidmapd.service
   200ms mcelog.service
   186ms irqbalance.service
   181ms udev.service
   172ms home.mount
   160ms mdmonitor.service
   151ms auditd.service
   149ms abrt-oops.service
   140ms systemd-sysctl.service
   139ms portreserve.service
   139ms boot.mount
   133ms iptables.service
   133ms sshd.service
   131ms rpcgssd.service
   120ms ip6tables.service
   113ms httpd.service
   111ms netfs.service
   106ms abrt-ccpp.service
    93ms nfslock.service
    93ms console-kit-daemon.service
    80ms rpcbind.service
    75ms smolt.service
    64ms udev-trigger.service
    52ms fedora-autoswap.service
    50ms rc-local.service
    47ms fedora-wait-storage.service
    32ms pcscd.service
    21ms accounts-daemon.service
    18ms systemd-user-sessions.service
    14ms rtkit-daemon.service

Du coup ça fait quand même un peu honte de démarrer aussi lentement sur une config pareille !

Aalphad · 23 juin 2011

Voici les miennes, vivement qu'on trouve solution, je suis obligé de booter deux fois meme trois pour acceder au bureau. A croire que la 15 a une dent contre les ASUS

[alphad@asuslaptop ~]$ systemd-analyze time
Startup finished in 1930ms (kernel) + 4925ms (initrd) + 69554ms (userspace) = 76410ms
[alphad@asuslaptop ~]$ systemd-analyze blame
 58938ms systemd-vconsole-setup.service
 55902ms fedora-readonly.service
 54896ms udev-settle.service
  4014ms remount-rootfs.service
  3260ms udev.service
  2478ms systemd-binfmt.service
  2219ms systemd-sysctl.service
  2207ms hwclock-load.service
  1664ms fedora-sysinit-hack.service
  1061ms NetworkManager.service
   994ms media.mount
   978ms lvm2-monitor.service
   837ms systemd-remount-api-vfs.service
   767ms sendmail.service
   735ms avahi-daemon.service
   723ms abrtd.service
   709ms systemd-readahead-collect.service
   701ms systemd-readahead-replay.service
   577ms rsyslog.service
   559ms cpuspeed.service
   555ms fedora-storage-init.service
   524ms ip6tables.service
   518ms iscsid.service
   503ms cups.service
   408ms systemd-tmpfiles-setup.service
   405ms fedora-storage-init-late.service
   383ms netfs.service
   326ms portreserve.service
   313ms iptables.service
   310ms mdmonitor.service
   308ms lldpad.service
   308ms abrt-oops.service
   289ms fedora-sysinit-unhack.service
   270ms sandbox.service
   265ms dbus.service
   250ms console-kit-log-system-start.service
   232ms auditd.service
   230ms livesys.service
   196ms irqbalance.service
   189ms mcelog.service
   150ms udev-trigger.service
   132ms abrt-ccpp.service
   127ms console-kit-daemon.service
   122ms iscsi.service
    70ms proc-sys-fs-binfmt_misc.mount
    64ms fedora-wait-storage.service
    48ms fedora-autoswap.service
    47ms livesys-late.service
    41ms smolt.service
    35ms accounts-daemon.service
    25ms rc-local.service
    20ms systemd-user-sessions.service
    13ms rtkit-daemon.service
[alphad@asuslaptop ~]$

PapsOu · 23 juin 2011

alphad wrote:Voici les miennes, vivement qu'on trouve solution, je suis obligé de booter deux fois meme trois pour acceder au bureau. A croire que la 15 a une dent contre les ASUS

Y aurai pas des fioritures de chez ASUS à désactiver (genre express gate ou autre chose ?). En voyant toutes les options du bios de la CM, je n'ose vraiment pas toucher à tout au risque de tout faire péter.
Au début, je pensais que ça venait de btrfs (il y avait un check disk à chaque démarrage), du coup, je suis passé en ext4 sur un LVM, mais c'est aussi lent (peut être un peu moin vu que je n'ai plus droit au check disk systématique).

Bref, est-ce qu'il y a énormément de monde qui à un temps boot lamentable (au vu des quelques poignées de secondes annoncées grâce à systemD) ?

Fifi · 23 juin 2011

Bonjour,
Bizarre vos trucs : chez moi :

[Fifi@localhost ~]$ systemd-analyze time
Startup finished in 1486ms (kernel) + 4106ms (initrd) + 21807ms (userspace) = 27400ms
[Fifi@localhost ~]$ systemd-analyze blame
  7203ms udev-settle.service
  5323ms remount-rootfs.service
  3201ms cups.service
  2625ms fedora-sysinit-hack.service
  2567ms media.mount
  2523ms systemd-remount-api-vfs.service
  1403ms hwclock-load.service
  1306ms autofs.service
  1219ms systemd-vconsole-setup.service
   893ms systemd-readahead-collect.service
   564ms NetworkManager.service
   479ms sandbox.service
   447ms rsyslog.service
   397ms sendmail.service
   337ms systemd-tmpfiles-setup.service
   326ms udev.service
   306ms WD500\x2d4.mount
   259ms rpcidmapd.service
   249ms console-kit-log-system-start.service
   247ms fedora-sysinit-unhack.service
   212ms acpid.service
   209ms systemd-sysctl.service
   199ms gpm.service
   197ms sysstat.service
   158ms auditd.service
   147ms portreserve.service
   136ms irqbalance.service
   127ms dbus.service
   125ms mcelog.service
   123ms netfs.service
   120ms nfslock.service
   108ms rpcgssd.service
   103ms rpcbind.service
   101ms iptables.service
    98ms systemd-readahead-replay.service
    95ms fedora-readonly.service
    93ms sshd.service
    89ms cpuspeed.service                                                                                                                         
    85ms home.mount                                                                                                                               
    79ms udev-trigger.service                                                                                                                     
    75ms rtkit-daemon.service                                                                                                                     
    69ms console-kit-daemon.service                                                                                                               
    65ms pcscd.service                                                                                                                            
    59ms fedora-wait-storage.service
    49ms fedora-autoswap.service
    36ms smolt.service
    29ms boot.mount
    27ms fedora-storage-init.service
    27ms fedora-storage-init-late.service
    25ms systemd-user-sessions.service
    20ms rc-local.service
[Fifi@localhost ~]$

PapsOu · 23 juin 2011

@Fifi : T'as quoi comme bécane ? t'es en 32 ou 64 bits ? SSD ou pas ?

Fifi · 23 juin 2011

PapsOu wrote:@Fifi : T'as quoi comme bécane ? t'es en 32 ou 64 bits ? SSD ou pas ?

Salut Papsou,
Comme indiqué ( avec moins de détails ) dans ma signature :
Je suis en 64 bits, carte-mère Asus M3A32-MVP Deluxe, processeur AMD Phenom 8650 X3 ( non overclocké ), carte graphique Nvidia GTX 260 ( eVGA ) avec les pilotes proprio Nvidia, mémoire 4 Go RAM ( 2x2 Go Corsair réglée en 800 Mhz unganged )). Je n'ai pas de disques SSD, c'est du Sata3 : 2 disques durs de 500 Go ( 1 Seagate et un Western Digital ), Fedora F15-x86_64 - KDE4.6.3

tsly · 23 juin 2011

j'ai toujours le même problème de lenteur au démarrage... Quand j'ai installé FC15 sur mon sony vaio j'en ai pas cru mes yeux, il a démarré en 30 sec !
Quant à lui, mon eee pc met au moins 3min !!! quand je ne dois pas le redémarrer ou user du ctrl+D... pfff, la galère

Je n'ai pas eu le temps de vraiment chercher... mais va falloir s'y mettre :-P

en attendant voici ma config (essayez de faire plus complet les gars :lol: :-D :-P )

Asus Eee PC 1000HD

Général
Couleur: Noir
Poids: 1.45 kg
Hauteur: 3.8 cm
Profondeur: 19.1 cm
Largeur: 26.6 cm
Dispositifs intégrés: Haut-parleurs stéréo, antenne LAN sans fil
Type de système: Netbook
MPN: CNETASUS1000HD-BKBB1

Processeur
Vitesse du Bus de Données: 400 MHz
Efficacité de l'alimentation: Ultra-basse tension (ULV)
Processeur: Intel Celeron M 353 / 900 MHz

Mémoire cache
Taille installée: 512 Ko
Type: L2

Ram
Caractéristiques de configuration: 1 x 2 Go
Conformité avec les spécifications mémoire: PC2-5300
Technologie: DDR2 SDRAM - 667 MHz
Taille installée: 2 Go / 2 Go (maximum)
Facteur de Forme: SO DIMM 200 broches

Contrôleur de stockage
Interface Serial ATA: Serial ATA-150
Type: Serial ATA

Stockage
Disque dur: 120 Go - Serial ATA-150 - 5400 tours/min

Lecteur de carte
Cartes mémoire flash prises en charge: Carte Mémoire SD, MultiMediaCard, carte mémoire SDHC
Type: Lecteur de carte

Affichage
Technologie de rétroéclairage LCD: Rétroéclairage par LED
Résolution maxi: 1024 x 600 ( WSVGA )
Écran Large: Oui
Type d'affichage: 10" TFT

Vidéo
Processeur graphique: Intel GMA 900 Dynamic Video Memory Technology 3.0

Audio
Entrée audio: Microphone stéréo
Conformité aux normes: High Definition Audio
Sortie audio: Carte son

Description du produit par le fabriquant
Le Eee PC 1000HD est équipé d'un écran de 10 pouces vous permettant de visionner facilement vos documents et vos pages Internet.

Caméra de portable
Résolution du capteur: 1,3 Mégapixel
Type de caméra: Intégré(e)

Périphérique(s) d'entrée
Type: Clavier, touchpad

Réseaux
Conformité aux normes: IEEE 802.11b, IEEE 802.11g
Protocole de liaison de données: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g
LAN sans fil pris en charge: Oui
Réseaux: Adaptateur réseau

Extension/connectivité
Nombre total de connecteurs d'extension (disponibles): 1 ( 0 ) x mémoire - SO DIMM 200 broches

Interfaces:
3 x Hi-Speed USB - USB à 4 broches, type A
1 x affichage / vidéo - VGA - HD D-Sub (HD-15) 15 broches
1 x casque - sortie - fiche mini-phone Stéréo 3,5 mm
1 x microphone - entrée - mini-téléphone 3,5 mm
1 x réseau - Ethernet 10Base-T/100Base-TX - RJ-45

Alimentation
Tension requise: CA 120/230 V ( 50/60 Hz )
Périphérique d'alimentation: Externe

Batterie
Qté installée: 1
Technologie: Lithium Ion

Système d'exploitation / logiciels
Logiciel: Pilotes de périphérique & utilitaires, Microsoft Works, Microsoft Live
Système d'exploitation fourni: Windows XP Édition Familiale
Système d'exploitation installé: Fedora 15 - Gnome 3

Garantie du fabricant
Détails des services et de la maintenance: Garantie limitée - pièces et main d'oeuvre - 1 an
Services & maintenance: Garantie de 1 an

nan tapez pas :hammer: :-P

PapsOu · 23 juin 2011

Fifi wrote:
PapsOu wrote:@Fifi : T'as quoi comme bécane ? t'es en 32 ou 64 bits ? SSD ou pas ?
Salut Papsou,
Comme indiqué ( avec moins de détails ) dans ma signature :
Je suis en 64 bits, carte-mère Asus M3A32-MVP Deluxe, processeur AMD Phenom 8650 X3 ( non overclocké ), carte graphique Nvidia GTX 260 ( eVGA ) avec les pilotes proprio Nvidia, mémoire 4 Go RAM ( 2x2 Go Corsair réglée en 800 Mhz unganged )). Je n'ai pas de disques SSD, c'est du Sata3 : 2 disques durs de 500 Go ( 1 Seagate et un Western Digital ), Fedora F15-x86_64 - KDE4.6.3

Mmmm, sous KDE et ça boot vite (mais ça doit pas venir de là)...
Côté partitionnement ça donne quoi ?
Moi ça donne ça :

[root@Fixe ~]# fdisk -l

Disque /dev/sda : 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0xd334d334

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1   *        2048     1026047      512000   83  Linux
/dev/sda2         1026048   976773119   487873536   8e  LVM Linux

Disque /dev/mapper/vg_fixe-lv_swap : 1476 Mo, 1476395008 octets
255 têtes, 63 secteurs/piste, 179 cylindres, total 2883584 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000

Le disque /dev/mapper/vg_fixe-lv_swap ne contient pas une table de partitions valable

Disque /dev/mapper/vg_fixe-lv_root : 104.9 Go, 104857600000 octets
255 têtes, 63 secteurs/piste, 12748 cylindres, total 204800000 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000

Le disque /dev/mapper/vg_fixe-lv_root ne contient pas une table de partitions valable

Disque /dev/mapper/vg_fixe-lv_home : 393.2 Go, 393224388608 octets
255 têtes, 63 secteurs/piste, 47806 cylindres, total 768016384 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Identifiant de disque : 0x00000000

Le disque /dev/mapper/vg_fixe-lv_home ne contient pas une table de partitions valable

Mais lors de ma première install, j'avais mis en btrfs (une partoche pour /, une pour /home) mais c'était tout aussi lent.

Fifi · 24 juin 2011

PapsOu wrote:Côté partitionnement ça donne quoi ?

[Fifi@localhost ~]$ su -
Mot de passe : 
[root@localhost ~]# fdisk -l

Disque /dev/sda: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x526f8fb1

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1              63   122881184    61440561    7  HPFS/NTFS
/dev/sda2   *   122881185   123395264      257040   83  Linux
/dev/sda3       123395265   184827824    30716280   83  Linux
/dev/sda4       184827825   976768064   395970120    5  Etendue
/dev/sda5       184827888   193020974     4096543+  82  Linux swap / Solaris
/dev/sda6       193021038   233986724    20482843+  83  Linux
/dev/sda7       233986788   234597194      305203+  83  Linux
/dev/sda8       234597258   296029754    30716248+  83  Linux
/dev/sda9       296029818   377945189    40957686   83  Linux
/dev/sda10      377945253   378459269      257008+  83  Linux
/dev/sda11      378459333   460374704    40957686   83  Linux
/dev/sda12      460378112   976766975   258194432    7  HPFS/NTFS

Disque /dev/sdb: 500.1 Go, 500107862016 octets
255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x000a362f

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdb1              63   976768064   488384001    5  Etendue
/dev/sdb5             126    20980889    10490382    b  W95 FAT32
/dev/sdb6        20980953    73417049    26218048+   7  HPFS/NTFS
/dev/sdb7        73417113   188763749    57673318+   7  HPFS/NTFS
/dev/sdb8       188763813   398476259   104856223+   7  HPFS/NTFS     
/dev/sdb9   *   398479360   399503359      512000   83  Linux         
/dev/sdb10      399505408   440465407    20480000   83  Linux         
/dev/sdb11      440467456   460947455    10240000   83  Linux         
/dev/sdb12      460949504   976766975   257908736   83  Linux         
                                                                      
Disque /dev/sdc: 250.1 Go, 250059350016 octets                        
255 têtes, 63 secteurs/piste, 30401 cylindres, total 488397168 secteurs                                                                     
Unités = secteurs de 1 * 512 = 512 octets                             
Sector size (logical/physical): 512 bytes / 512 bytes                 
I/O size (minimum/optimal): 512 bytes / 512 bytes                     
Identifiant de disque : 0x3e4554d8                                    
                                                                      
Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sdc1        73256400   488392064   207567832+   7  HPFS/NTFS
/dev/sdc2   *          63    10249469     5124703+  83  Linux
/dev/sdc3        10249470    73256399    31503465   83  Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque
[root@localhost ~]#

Le 3ème disque ( sdc ) est un externe en USB.

PapsOu · 24 juin 2011

Bon, j'ai jeté un oeil sur mon dmesg et j'ai repéré quelques « trous », en voici :

[    3.676751] scsi6 : pata_atiixp
[    3.679113] scsi7 : pata_atiixp
[    3.679637] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    3.679639] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[   34.784130] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   34.784134] ata1.00: failed command: IDENTIFY PACKET DEVICE
[   34.784138] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[   34.784139]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[   34.784141] ata1.00: status: { DRDY }
[   34.784145] ata1: hard resetting link
[   35.244049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   36.046778] ata1.00: configured for PIO4
[   36.847517] ata1: EH complete

[   46.227120] usbcore: registered new interface driver usblp
[   46.229158] udev-configure-printer[705]: MFG:HP MDL:Deskjet 5900 series SERN:CN67K1T0BT04KF serial:CN67K1T0BT04KF
[   47.723952] udev-configure-printer[705]: failed to connect to CUPS server; giving up
[   52.145713] Adding 1441788k swap on /dev/mapper/vg_fixe-lv_swap.  Priority:0 extents:1 across:1441788k 
[   52.395781] systemd-fsck[725]: /dev/sda1 : propre, 46/128016 fichiers, 89196/512000 blocs
[   52.520815] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   52.524859] SELinux: initialized (dev sda1, type ext4), uses xattr
[   73.760065] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   73.760069] ata1.00: failed command: IDENTIFY PACKET DEVICE
[   73.760073] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[   73.760074]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[   73.760076] ata1.00: status: { DRDY }
[   73.760080] ata1: hard resetting link
[   74.220058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   75.022558] ata1.00: configured for PIO4
[   75.823232] ata1: EH complete

et

[   78.925181] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[   79.713264] r8169 0000:03:00.0: p10p1: link up
[   79.716018] ADDRCONF(NETDEV_CHANGE): p10p1: link becomes ready
[   84.522037] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   90.594053] p10p1: no IPv6 routers present
[   93.324662] fuse init (API version 7.16)
[   93.330169] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   93.361592] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts

Bon bah je vais creuser ce point là : « ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen »

[edit] : @tsly et alphad : balancez cette commande chez vous et checkez s'il y a aussi des trous de ce genre.

dmesg > ~/Bureau/dmesg.txt

PapsOu · 24 juin 2011

Bon, résolu pour moi ! (super !)
En cherchant « ata1.00: failed command: IDENTIFY PACKET DEVICE » dans mon ami de toujours, je suis tombé sur ce bug
j'ai donc rajouté « libata.atapi_passthru16=0 » a la ligne du kernel, et hop démarrage ultra rapide, ça fait plaisir !

[PapsOu@Fixe ~]$ systemd-analyze time
Startup finished in 2782ms (kernel) + 2860ms (initrd) + 21026ms (userspace) = 26668ms
[PapsOu@Fixe ~]$ systemd-analyze blame
 10834ms udev-settle.service
  3199ms fedora-sysinit-hack.service
  2621ms cups.service
  2352ms media.mount
  2252ms mysqld.service
  2195ms remount-rootfs.service
  2140ms systemd-remount-api-vfs.service
  2105ms hwclock-load.service
  1335ms systemd-vconsole-setup.service
   920ms fedora-readonly.service
   871ms systemd-readahead-collect.service
   863ms systemd-readahead-replay.service
   552ms fedora-storage-init.service
   492ms NetworkManager.service
   424ms lvm2-monitor.service
   416ms abrtd.service
   405ms rsyslog.service
   404ms avahi-daemon.service
   328ms fedora-storage-init-late.service
   302ms sendmail.service
   260ms systemd-tmpfiles-setup.service
   260ms dbus.service
   254ms systemd-sysctl.service
   236ms fedora-sysinit-unhack.service
   224ms console-kit-log-system-start.service
   215ms acpid.service
   210ms sandbox.service
   176ms mcelog.service
   172ms irqbalance.service
   157ms rpcidmapd.service
   144ms auditd.service
   128ms nfslock.service
   125ms mdmonitor.service
   113ms abrt-oops.service
   105ms rpcgssd.service
   104ms sshd.service
    97ms portreserve.service
    96ms netfs.service
    94ms udev.service
    85ms iptables.service
    84ms httpd.service
    83ms ip6tables.service
    73ms rpcbind.service
    73ms abrt-ccpp.service
    62ms console-kit-daemon.service
    57ms cpuspeed.service
    52ms udev-trigger.service
    49ms boot.mount
    43ms fedora-autoswap.service
    38ms home.mount
    36ms fedora-wait-storage.service
    29ms smolt.service
    27ms pcscd.service
    17ms systemd-user-sessions.service
    11ms rc-local.service
    11ms accounts-daemon.service
     5ms rtkit-daemon.service
[PapsOu@Fixe ~]$

Et vous alors, ça donne quoi votre dmesg ?

[edit] : et j'arrive à faire un tout petit peu mieux que toi Fifi :hammer:

Fifi · 24 juin 2011

PapsOu wrote:Bon, résolu pour moi ! (super !)
En cherchant « ata1.00: failed command: IDENTIFY PACKET DEVICE » dans mon ami de toujours, je suis tombé sur ce bug
j'ai donc rajouté « libata.atapi_passthru16=0 » a la ligne du kernel, et hop démarrage ultra rapide, ça fait plaisir !

[PapsOu@Fixe ~]$ systemd-analyze time
Startup finished in 2782ms (kernel) + 2860ms (initrd) + 21026ms (userspace) = 26668ms
[PapsOu@Fixe ~]$ systemd-analyze blame
 10834ms udev-settle.service
  3199ms fedora-sysinit-hack.service
  2621ms cups.service
  2352ms media.mount
  2252ms mysqld.service
  2195ms remount-rootfs.service
  2140ms systemd-remount-api-vfs.service
  2105ms hwclock-load.service
  1335ms systemd-vconsole-setup.service
   920ms fedora-readonly.service
   871ms systemd-readahead-collect.service
   863ms systemd-readahead-replay.service
   552ms fedora-storage-init.service
   492ms NetworkManager.service
   424ms lvm2-monitor.service
   416ms abrtd.service
   405ms rsyslog.service
   404ms avahi-daemon.service
   328ms fedora-storage-init-late.service
   302ms sendmail.service
   260ms systemd-tmpfiles-setup.service
   260ms dbus.service
   254ms systemd-sysctl.service
   236ms fedora-sysinit-unhack.service
   224ms console-kit-log-system-start.service
   215ms acpid.service
   210ms sandbox.service
   176ms mcelog.service
   172ms irqbalance.service
   157ms rpcidmapd.service
   144ms auditd.service
   128ms nfslock.service
   125ms mdmonitor.service
   113ms abrt-oops.service
   105ms rpcgssd.service
   104ms sshd.service
    97ms portreserve.service
    96ms netfs.service
    94ms udev.service
    85ms iptables.service
    84ms httpd.service
    83ms ip6tables.service
    73ms rpcbind.service
    73ms abrt-ccpp.service
    62ms console-kit-daemon.service
    57ms cpuspeed.service
    52ms udev-trigger.service
    49ms boot.mount
    43ms fedora-autoswap.service
    38ms home.mount
    36ms fedora-wait-storage.service
    29ms smolt.service
    27ms pcscd.service
    17ms systemd-user-sessions.service
    11ms rc-local.service
    11ms accounts-daemon.service
     5ms rtkit-daemon.service
[PapsOu@Fixe ~]$

Et vous alors, ça donne quoi votre dmesg ?

[edit] : et j'arrive à faire un tout petit peu mieux que toi Fifi :hammer:

Super !!!
Il faudrait voir aussi, je pense, quels services sont lancés au démarrage ... et désactiver les inutiles, s'il y en a...

tsly · 24 juin 2011

merci PapsOu pour la commande...

je n'ai apparemment pas les même "trous" que toi... :-D

dmesg

[   11.580340] systemd[1]: Set hostname to <eeepc.localdomain>.
[   14.730895] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   14.734208] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   14.735670] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   14.755243] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   14.756610] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   29.069613] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   29.120845] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   29.354031] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   29.676395] udev[382]: starting version 167
[   33.562934] intel_rng: FWH not detected

...

[   37.957671] Linux video capture interface: v2.00
[   38.101571] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   38.103958] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[   38.107992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  100.881902] udev[391]: renamed network interface eth0 to em2
[  101.590086] cfg80211: Calling CRDA to update world regulatory domain
[  101.667527] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505)
[  101.895865] usbcore: registered new interface driver uvcvideo
[  101.895872] USB Video Class driver (v1.0.0)

...

[  103.707471] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  104.175898] systemd-fsck[617]: /dev/sda1: clean, 90/128016 files, 86612/512000 blocks
[  104.377028] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  104.379580] SELinux: initialized (dev sda1, type ext4), uses xattr
[  104.586203] systemd[1]: Job dev-mapper-vg_eeepc\x2dlv_home.device/start timed out.
[  104.586232] systemd[1]: Job fedora-autorelabel.service/start failed with result 'dependency'.
[  104.586256] systemd[1]: Job fedora-autorelabel-mark.service/start failed with result 'dependency'.
[  104.586280] systemd[1]: Job local-fs.target/start failed with result 'dependency'.
[  104.586302] systemd[1]: Triggering OnFailure= dependencies of local-fs.target.
[  104.586324] systemd[1]: Job home.mount/start failed with result 'dependency'.
[  104.586346] systemd[1]: Job dev-mapper-vg_eeepc\x2dlv_home.device/start failed with result 'timeout'.
[  105.555468] systemd[1]: Startup finished in 2s 180ms 697us (kernel) + 9s 462ms 246us (initrd) + 1min 33s 912ms 318us (userspace) = 1min 45s 555ms 261us.
[  158.097049] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  158.426318] udev[666]: starting version 167
[  159.473313] intel_rng: FWH not detected
[  162.195578] composite sync not supported
[  165.114124] systemd-fsck[880]: /dev/mapper/vg_eeepc-lv_home: clean, 67220/6332416 files, 3213850/25313280 blocks
[  165.609219] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  165.609250] SELinux: initialized (dev dm-2, type ext4), uses xattr
[  170.299789] ATL1E 0000:03:00.0: irq 44 for MSI/MSI-X
[  170.308538] ADDRCONF(NETDEV_UP): em2: link is not ready
[  170.437680] ADDRCONF(NETDEV_UP): wlan0: link is not ready

je vais pouvoir chercher plus précisemment... mais je n'aurai pas le temps avant dimanche... je reviendrai poster 😉

Aalphad · 26 juin 2011

voici le mien, je le poste en bloc:

input/input2
[    1.476348] ACPI: Sleep Button [SLPB]
[    1.476504] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.476515] ACPI: Power Button [PWRF]
[    1.476994] ACPI: acpi_idle registered with cpuidle
[    1.477075] ACPI: duty_cycle spans bit 4
[    1.477306] Marking TSC unstable due to TSC halts in idle
[    1.496215] thermal LNXTHERM:00: registered as thermal_zone0
[    1.496222] ACPI: Thermal Zone [THRM] (54 C)
[    1.496262] ERST: Table is not found!
[    1.496356] isapnp: Scanning for PnP cards...
[    1.636896] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.636915] ACPI: Battery Slot [BAT0] (battery present)
[    1.855268] isapnp: No Plug & Play device found
[    1.855583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.859451] Non-volatile memory driver v1.3
[    1.859458] Linux agpgart interface v0.103
[    1.866043] brd: module loaded
[    1.868076] loop: module loaded
[    1.868265] ahci 0000:00:12.0: version 3.0
[    1.868303] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.868354] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    1.868551] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.868563] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio slum part ccc 
[    1.870843] scsi0 : ahci
[    1.871194] scsi1 : ahci
[    1.871458] scsi2 : ahci
[    1.871730] scsi3 : ahci
[    1.872168] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
[    1.872178] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
[    1.872187] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
[    1.872196] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
[    1.872535] Fixed MDIO Bus: probed
[    1.872719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.872768] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.872793] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    1.872954] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    1.873084] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    1.873114] ehci_hcd 0000:00:13.5: debug port 1
[    1.873160] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
[    1.879044] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    1.879108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.879116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.879124] usb usb1: Product: EHCI Host Controller
[    1.879131] usb usb1: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ehci_hcd
[    1.879138] usb usb1: SerialNumber: 0000:00:13.5
[    1.879476] hub 1-0:1.0: USB hub found
[    1.879490] hub 1-0:1.0: 10 ports detected
[    1.879784] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.879826] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.879848] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.879984] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    1.880108] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
[    1.935121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.935130] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.935138] usb usb2: Product: OHCI Host Controller
[    1.935145] usb usb2: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ohci_hcd
[    1.935152] usb usb2: SerialNumber: 0000:00:13.0
[    1.935456] hub 2-0:1.0: USB hub found
[    1.935472] hub 2-0:1.0: 2 ports detected
[    1.935691] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.935714] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.935842] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.935945] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
[    1.990090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.990099] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.990107] usb usb3: Product: OHCI Host Controller
[    1.990113] usb usb3: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ohci_hcd
[    1.990120] usb usb3: SerialNumber: 0000:00:13.1
[    1.990438] hub 3-0:1.0: USB hub found
[    1.990454] hub 3-0:1.0: 2 ports detected
[    1.990672] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.990700] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.990829] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.990932] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
[    2.045112] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.045121] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.045128] usb usb4: Product: OHCI Host Controller
[    2.045135] usb usb4: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ohci_hcd
[    2.045142] usb usb4: SerialNumber: 0000:00:13.2
[    2.045449] hub 4-0:1.0: USB hub found
[    2.045465] hub 4-0:1.0: 2 ports detected
[    2.045679] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    2.045702] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    2.045838] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    2.046090] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
[    2.101086] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.101095] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.101102] usb usb5: Product: OHCI Host Controller
[    2.101109] usb usb5: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ohci_hcd
[    2.101116] usb usb5: SerialNumber: 0000:00:13.3
[    2.101425] hub 5-0:1.0: USB hub found
[    2.101441] hub 5-0:1.0: 2 ports detected
[    2.101657] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.101681] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    2.101828] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    2.101922] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
[    2.156117] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.156126] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.156134] usb usb6: Product: OHCI Host Controller
[    2.156141] usb usb6: Manufacturer: Linux 2.6.38.6-26.rc1.fc15.i686 ohci_hcd
[    2.156148] usb usb6: SerialNumber: 0000:00:13.4
[    2.156473] hub 6-0:1.0: USB hub found
[    2.156489] hub 6-0:1.0: 2 ports detected
[    2.156707] uhci_hcd: USB Universal Host Controller Interface driver
[    2.156939] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.158874] i8042: Detected active multiplexing controller, rev 1.1
[    2.160284] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.160300] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.160402] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.160506] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.160612] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.160924] mousedev: PS/2 mouse device common for all mice
[    2.161656] rtc_cmos 00:02: RTC can wake from S4
[    2.164234] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.164278] rtc0: alarms up to one month, y3k, 114 bytes nvram
[    2.164499] device-mapper: uevent: version 1.0.3
[    2.164751] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    2.164991] cpuidle: using governor ladder
[    2.165247] cpuidle: using governor menu
[    2.165759] usbcore: registered new interface driver usbhid
[    2.165765] usbhid: USB HID core driver
[    2.165816] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.166414] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.166448] TCP cubic registered
[    2.166454] Initializing XFRM netlink socket
[    2.166476] NET: Registered protocol family 17
[    2.166526] Registering the dns_resolver key type
[    2.166585] Using IPI No-Shortcut mode
[    2.166865] PM: Hibernation image not present or could not be loaded.
[    2.166897] registered taskstats version 1
[    2.167061] IMA: No TPM chip found, activating TPM-bypass!
[    2.167650]   Magic number: 15:464:686
[    2.167830] rtc_cmos 00:02: setting system clock to 2011-06-26 13:39:13 UTC (1309095553)
[    2.167914] Initalizing network drop monitor service
[    2.177115] ata3: SATA link down (SStatus 0 SControl 300)
[    2.177215] ata4: SATA link down (SStatus 0 SControl 300)
[    2.177260] ata2: SATA link down (SStatus 0 SControl 300)
[    2.181099] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    2.194269] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.317776] usb 1-4: New USB device found, idVendor=0bda, idProduct=0116
[    2.317785] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.317792] usb 1-4: Product: USB2.0-CRW
[    2.317799] usb 1-4: Manufacturer: Generic
[    2.317805] usb 1-4: SerialNumber: 20021111153705700
[    2.332092] ata1: softreset failed (device not ready)
[    2.332160] ata1: applying SB600 PMP SRST workaround and retrying
[    2.423081] usb 1-7: new high speed USB device using ehci_hcd and address 3
[    2.487103] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.488051] ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[    2.488061] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.488072] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.489251] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    2.489260] ata1.00: configured for UDMA/133
[    2.489622] scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
[    2.490123] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.490137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.490352] sd 0:0:0:0: [sda] Write Protect is off
[    2.490361] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.490503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.540178] usb 1-7: New USB device found, idVendor=05e1, idProduct=0501
[    2.540188] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.540195] usb 1-7: Product: USB 2.0 Image Capture Controller
[    2.540202] usb 1-7: Manufacturer: Syntek Semiconductor
[    2.547680]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    2.548898] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.549060] Freeing unused kernel memory: 568k freed
[    2.550077] Write protecting the kernel text: 3956k
[    2.550216] Write protecting the kernel read-only data: 1912k
[    2.637452] dracut: dracut-009-10.fc15
[    2.661381] dracut: rd.luks=0: removing cryptoluks activation
[    2.668531] dracut: rd.lvm=0: removing LVM activation
[    2.684796] udev[107]: starting version 167
[    2.853934] [drm] Initialized drm 1.1.0 20060810
[    2.998578] [drm] radeon defaulting to kernel modesetting.
[    2.998586] [drm] radeon kernel modesetting enabled.
[    2.998836] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.003387] [drm] initializing kernel modesetting (RS400 0x1002:0x5A62).
[    3.003451] [drm] register mmio base: 0xFA8F0000
[    3.003456] [drm] register mmio size: 65536
[    3.003768] [drm] Generation 2 PCI interface, using max accessible memory
[    3.003782] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
[    3.003792] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    3.003816] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.003822] [drm] Driver supports precise vblank timestamp query.
[    3.003845] [drm] radeon: irq initialized.
[    3.006504] [drm] Detected VRAM RAM=128M, BAR=256M
[    3.006511] [drm] RAM width 128bits DDR
[    3.006739] [TTM] Zone  kernel: Available graphics memory: 433610 kiB.
[    3.006747] [TTM] Zone highmem: Available graphics memory: 965902 kiB.
[    3.006754] [TTM] Initializing pool allocator.
[    3.006803] [drm] radeon: 128M of VRAM memory ready
[    3.006809] [drm] radeon: 512M of GTT memory ready.
[    3.006866] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.054273] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[    3.066494] radeon 0000:01:05.0: WB enabled
[    3.066668] [drm] Loading R300 Microcode
[    3.073464] [drm] radeon: ring at 0x0000000080001000
[    3.073492] [drm] ring test succeeded in 1 usecs
[    3.074030] [drm] radeon: ib pool ready.
[    3.074226] [drm] ib test succeeded in 0 usecs
[    3.074826] [drm] Panel ID String: AUO                     
[    3.074833] [drm] Panel Size 1280x800
[    3.075029] [drm] Radeon Display Connectors
[    3.075035] [drm] Connector 0:
[    3.075039] [drm]   VGA
[    3.075046] [drm]   DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[    3.075052] [drm]   Encoders:
[    3.075056] [drm]     CRT1: INTERNAL_DAC2
[    3.075061] [drm] Connector 1:
[    3.075065] [drm]   LVDS
[    3.075072] [drm]   DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[    3.075077] [drm]   Encoders:
[    3.075082] [drm]     LCD1: INTERNAL_LVDS
[    3.132574] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
[    3.174704] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[    3.223487] [drm] fb mappable at 0xA0040000
[    3.223494] [drm] vram apper at 0xA0000000
[    3.223499] [drm] size 4096000
[    3.223504] [drm] fb depth is 24
[    3.223508] [drm]    pitch is 5120
[    3.223681] fbcon: radeondrmfb (fb0) is primary device
[    3.276349] Console: switching to colour frame buffer device 160x50
[    3.290226] fb0: radeondrmfb frame buffer device
[    3.290231] drm: registered panic notifier
[    3.290250] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0
[    3.315058] dracut: Starting plymouth daemon
[    3.567140] dracut: rd.dm=0: removing DM RAID activation
[    3.574726] dracut: rd.md=0: removing MD RAID activation
[    3.751416] acpi device:03: registered as cooling_device2
[    3.751632] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
[    3.751826] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.817472] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.817563] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    3.821235] scsi4 : pata_atiixp
[    3.823150] scsi5 : pata_atiixp
[    3.824882] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    3.824891] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    3.847889] Initializing USB Mass Storage driver...
[    3.851384] scsi6 : usb-storage 1-4:1.0
[    3.852064] usbcore: registered new interface driver usb-storage
[    3.852071] USB Mass Storage support registered.
[    3.979673] ata5.00: ATAPI: MATSHITADVD-RAM UJ-860S, 1.00, max UDMA/33
[    3.985623] ata5.00: configured for UDMA/33
[    3.988485] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-860S  1.00 PQ: 0 ANSI: 5
[    3.991126] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.991134] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.991506] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.991749] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    4.002938] usbcore: registered new interface driver uas
[    4.642405] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    4.642414] EXT4-fs (sda2): write access will be enabled during recovery
[    4.859817] scsi 6:0:0:0: Direct-Access     Generic- xD/SDMMC/MS/Pro  1.00 PQ: 0 ANSI: 0 CCS
[    4.862055] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.868769] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    9.147092] EXT4-fs (sda2): orphan cleanup on readonly fs
[    9.147117] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6384
[    9.147305] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6383
[    9.147355] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6381
[    9.147404] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5538
[    9.147455] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5073
[    9.147504] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 4289
[    9.147554] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1365
[    9.147606] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 262399
[    9.147657] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 268639
[    9.147769] EXT4-fs (sda2): 9 orphan inodes deleted
[    9.147775] EXT4-fs (sda2): recovery complete
[    9.439222] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.545980] dracut: Checking filesystems
[    9.546089] dracut: fsck -T -t noopts=_netdev -A -a
[    9.623250] dracut: _Fedora-15-i686-: clean, 121857/3391488 files, 1680025/13554688 blocks
[    9.624108] dracut: Remounting /dev/disk/by-uuid/5ac65c00-fca5-409b-a6d6-e44541dee4cc with -o ro,
[    9.830639] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.877578] dracut: Mounted root filesystem /dev/sda2
[   10.095886] dracut: Switching root
[   10.730759] type=1404 audit(1309095562.062:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[   10.951996] SELinux: 2048 avtab hash slots, 223062 rules.
[   11.145545] SELinux: 2048 avtab hash slots, 223062 rules.
[   11.829689] SELinux:  9 users, 13 roles, 3611 types, 192 bools, 1 sens, 1024 cats
[   11.829702] SELinux:  81 classes, 223062 rules
[   11.848182] SELinux:  Completing initialization.
[   11.848190] SELinux:  Setting up existing superblocks.
[   11.848214] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[   11.848232] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[   11.848274] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[   11.848294] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[   11.848318] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   11.848381] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[   11.849829] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[   11.849846] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[   11.852970] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[   11.852992] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[   11.853028] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[   11.853069] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[   11.853108] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[   11.853141] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[   11.853194] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[   11.853219] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[   11.853236] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[   11.854694] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   11.854712] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   11.855630] SELinux: initialized (dev sda2, type ext4), uses xattr
[   11.862907] type=1403 audit(1309095563.193:3): policy loaded auid=4294967295 ses=4294967295
[   12.512708] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   12.514371] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.021750] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.022797] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.023799] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.024793] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.025828] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.026850] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.027833] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.028812] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.029873] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[   13.134456] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[   13.452625] NET: Registered protocol family 10
[   13.482804] systemd[1]: Set hostname to <asuslaptop>.
[   15.154335] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   15.157081] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   15.158071] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   15.173983] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   15.174924] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   16.967508] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   16.990001] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   18.044545] EXT4-fs (sda2): re-mounted. Opts: (null)
[   20.939148] udev[383]: starting version 167
[   21.952730] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
[   21.952750] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54
[   21.953797] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   22.745876] mtp-probe[433]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-4"
[   22.745916] mtp-probe[440]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:13.5/usb1/1-7"
[   23.053428] mtp-probe[440]: bus: 1, device: 3 was not an MTP device
[   23.053460] mtp-probe[433]: bus: 1, device: 2 was not an MTP device
[   27.726701] cfg80211: Calling CRDA to update world regulatory domain
[   27.754989] cfg80211: World regulatory domain updated:
[   27.755000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.755058] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.755067] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.755076] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.755085] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.755094] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.960225] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0f]
[   28.960234] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.016228] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[   29.017974] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[   29.206486] asus_laptop: Asus Laptop Support version 0.42
[   29.206783] asus_laptop:   F5R model detected
[   29.209701] asus_laptop: Backlight controlled by ACPI video driver
[   29.210045] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
[   29.368162] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   29.368185] ath5k 0000:02:00.0: setting latency timer to 64
[   29.368286] ath5k 0000:02:00.0: registered as 'phy0'
[   29.538564] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   29.538572] Copyright (c) 2007 Atheros Corporation.
[   29.538654] atl2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   29.538675] atl2 0000:06:00.0: setting latency timer to 64
[   29.539724] Linux video capture interface: v2.00
[   82.755540] ath: EEPROM regdomain: 0x60
[   82.755547] ath: EEPROM indicates we should expect a direct regpair map
[   82.755556] ath: Country alpha2 being used: 00
[   82.755561] ath: Regpair used: 0x60
[   82.756049] udev[389]: renamed network interface eth0 to p1p2
[   82.982402] stkwebcam: Syntek USB2.0 Camera is now controlling device video0
[   82.982452] usbcore: registered new interface driver stkwebcam
[   83.046396] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   83.047218] Registered led device: ath5k-phy0::rx
[   83.047304] Registered led device: ath5k-phy0::tx
[   83.047329] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   83.071212] Adding 1268732k swap on /dev/sda6.  Priority:0 extents:1 across:1268732k 
[   83.133108] cfg80211: Calling CRDA for country: CI
[   83.377690] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   83.457237] hda_codec: ALC660-VD: BIOS auto-probing.
[   83.457256] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   83.457268] ALSA sound/pci/hda/hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   83.457279] ALSA sound/pci/hda/hda_codec.c:4641:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   83.457289] ALSA sound/pci/hda/hda_codec.c:4642:    mono: mono_out=0x0
[   83.457297] ALSA sound/pci/hda/hda_codec.c:4646:    inputs:
[   83.457305] ALSA sound/pci/hda/hda_codec.c:4652: 
[   83.458101] ALSA sound/pci/hda/patch_realtek.c:1585: realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
[   83.458112] ALSA sound/pci/hda/patch_realtek.c:1669: realtek: Enable default setup for auto mode as fallback
[   86.340741] avahi-daemon[710]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[   86.352601] avahi-daemon[710]: Successfully dropped root privileges.
[   86.353448] avahi-daemon[710]: avahi-daemon 0.6.30 starting up.
[   86.360058] NetworkManager[709]: <info> NetworkManager (version 0.8.9997-2.git20110531.fc15) is starting...
[   86.360195] NetworkManager[709]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[   87.621761] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   87.672225] atl2 0000:06:00.0: irq 40 for MSI/MSI-X
[   87.674418] ADDRCONF(NETDEV_UP): p1p2: link is not ready
[   87.998434] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   90.470647] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   90.470656] All bugs added by David S. Miller <davem@redhat.com>
[   91.526771] wlan0: authenticate with 00:21:29:7f:f9:c4 (try 1)
[   91.528314] wlan0: authenticated
[   91.534941] wlan0: associate with 00:21:29:7f:f9:c4 (try 1)
[   91.537120] wlan0: RX AssocResp from 00:21:29:7f:f9:c4 (capab=0x411 status=0 aid=2)
[   91.537125] wlan0: associated
[   91.538601] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  101.818065] wlan0: no IPv6 routers present
[  147.227374] fuse init (API version 7.16)
[  147.286077] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[  147.295958] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[alphad@asuslaptop ~]$

PapsOu · 26 juin 2011

@alphad : J'ai qu'une seule chose à te suggérer, copier le message (ou les messages) juste après les « trous », y coller dans google et chercher d’où peut venir le problème.

J'ai fait comme ça, j'ai réussi à trouver. Bon courage a vous deux.

[edit] : Bien sur, si vous pataugez longtemps, faudra creuser un peu plus.

tsly · 27 juin 2011

Pour ma part, la météo estivale de ces 2 derniers jours a eu raison de ma quête informatique...

Néanmoins j'ai grandement avancé car je me suis aperçu avec dmesg, qu'il y avait entr'autre un pb avec em2 et le wlan... donc j'ai désactivé dans le bios ces 2 composants, juste pour voir et au miracle, de 132714ms, on est passé à 53329ms !!!

Etant donné qu'un netbook sans le net ne sert pas à grand chose, j'ai choisi de réactivé juste le wifi... on remonte alors à 73575ms (par rapport à 132714ms tout de même...)

Je sais donc mieux où chercher le problème...

lspci -v
...
01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
    Subsystem: Device 1a3b:1026
    Physical Slot: eeepc-wifi
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath5k
    Kernel modules: ath5k
...

alphad a le même problème (entre autre ?) que moi et il possède également un controller Atheros...

La suite au prochain épisode... :lol:

Bbasik · 3 août 2011

Bonsoir,
J'ai moi aussi quelques problèmes de boot depuis quelques temps, alors qu'avant ça booté avec des temps très corrects (environ 40 secondes).

Depuis quelques temps, voici le temps moyen de démarrage :

[anthony@pluton ~]$ systemd-analyze time
Startup finished in 1859ms (kernel) + 3933ms (initrd) + 141049ms (userspace) = 146842ms
[anthony@pluton ~]$ systemd-analyze blame
120958ms sendmail.service
  6304ms systemd-vconsole-setup.service
  5415ms udev-settle.service
  4872ms fedora-sysinit-hack.service
  4152ms fedora-readonly.service
  3244ms media.mount
  2969ms cups.service
  2181ms mysqld.service
  1768ms remount-rootfs.service
  1666ms systemd-readahead-replay.service
  1649ms systemd-readahead-collect.service
  1579ms udev.service
  1555ms systemd-remount-api-vfs.service
   775ms avahi-daemon.service
   724ms NetworkManager.service
...

J'ai également regardé le contenu du dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38.8-35.fc15.x86_64 (mockbuild@x86-09.phx2.fedoraproject.org) (gcc version 4.6.0 20110530 (Red Hat 4.6.0-9) (GCC) ) #1 SMP Wed Jul 6 13:58:54 UTC 2011
[    0.000000] Command line: ro root=/dev/mapper/vg_pluton-lv_root rd_LVM_LV=vg_pluton/lv_root rd_LVM_LV=vg_pluton/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr-latin9 rhgb quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[    0.000000]  BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P6TD DELUXE, BIOS 0106    07/15/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 1C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask E00000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 7GB, range: 1GB, type UC
[    0.000000] reg 1, base: 0GB, range: 8GB, type WB
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] reg 3, base: 3064MB, range: 8MB, type UC
[    0.000000] total RAM covered: 6136M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 16M     num_reg: 5      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3064MB, range: 8MB, type UC
[    0.000000] reg 3, base: 4GB, range: 2GB, type WB
[    0.000000] reg 4, base: 6GB, range: 1GB, type WB
[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf780000 page 4k
[    0.000000] kernel direct mapping tables up to bf780000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[    0.000000]  0100000000 - 01c0000000 page 2M
[    0.000000] kernel direct mapping tables up to 1c0000000 @ bf778000-bf780000
[    0.000000] RAMDISK: 371dc000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fb250 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 071509 RSDT1009 20090715 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf780200 00084 (v01 071509 FACP1009 20090715 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf7804b0 0B62E (v01  A1438 A1438001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bf798000 00040
[    0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 071509 APIC1009 20090715 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 071509 OEMMCFG  20090715 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 071509 OEMB1009 20090715 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 071509 OEMHPET  20090715 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 071509 OEMOSFR  20090715 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bf79a140 0249F (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000001c0000000
[    0.000000] Initmem setup node 0 0000000000000000-00000001c0000000
[    0.000000]   NODE_DATA [00000001bffec000 - 00000001bfffffff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9e00000-ffff8801bf1fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x001c0000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bf780
[    0.000000]     0: 0x00100000 -> 0x001c0000
[    0.000000] On node 0 totalpages: 1570575
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765880 pages, LIFO batch:31
[    0.000000]   Normal zone: 10752 pages used for memmap
[    0.000000]   Normal zone: 775680 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[    0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
[    0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000
[    0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s83200 r8192 d23296 u131072
[    0.000000] pcpu-alloc: s83200 r8192 d23296 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1545481
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: ro root=/dev/mapper/vg_pluton-lv_root rd_LVM_LV=vg_pluton/lv_root rd_LVM_LV=vg_pluton/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr-latin9 rhgb quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6099588k/7340032k available (4610k kernel code, 1057732k absent, 182712k reserved, 6955k data, 948k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:1216 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 62914560 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2672.313 MHz processor.
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5344.62 BogoMIPS (lpj=2672313)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000044] Security Framework initialized
[    0.000052] SELinux:  Initializing.
[    0.000059] SELinux:  Starting in permissive mode
[    0.000828] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002470] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003096] Mount-cache hash table entries: 256
[    0.003231] Initializing cgroup subsys ns
[    0.003235] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.003237] Initializing cgroup subsys cpuacct
[    0.003243] Initializing cgroup subsys memory
[    0.003254] Initializing cgroup subsys devices
[    0.003256] Initializing cgroup subsys freezer
[    0.003258] Initializing cgroup subsys net_cls
[    0.003260] Initializing cgroup subsys blkio
[    0.003288] CPU: Physical Processor ID: 0
[    0.003289] CPU: Processor Core ID: 0
[    0.003294] mce: CPU supports 9 MCE banks
[    0.003303] CPU0: Thermal monitoring enabled (TM1)
[    0.003310] using mwait in idle threads.
[    0.003653] ACPI: Core revision 20110112
[    0.034655] ftrace: allocating 23817 entries in 94 pages
[    0.040665] Setting APIC routing to physical flat
[    0.041104] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.051105] CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
[    0.174966] APIC calibration not consistent with PM-Timer: 121ms instead of 100ms
[    0.174968] APIC delta adjusted to PM-Timer: 835224 (1018965)
[    0.174976] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[    0.174982] ... version:                3
[    0.174983] ... bit width:              48
[    0.174984] ... generic registers:      4
[    0.174985] ... value mask:             0000ffffffffffff
[    0.174987] ... max period:             000000007fffffff
[    0.174988] ... fixed-purpose events:   3
[    0.174989] ... event mask:             000000070000000f
[    0.175428] NMI watchdog enabled, takes one hw-pmu counter.
[    0.175514] Booting Node   0, Processors  #1
[    0.266043] NMI watchdog enabled, takes one hw-pmu counter.
[    0.266134]  #2
[    0.356962] NMI watchdog enabled, takes one hw-pmu counter.
[    0.357051]  #3
[    0.450962] NMI watchdog enabled, takes one hw-pmu counter.
[    0.451050]  #4
[    0.541949] NMI watchdog enabled, takes one hw-pmu counter.
[    0.542049]  #5
[    0.632895] NMI watchdog enabled, takes one hw-pmu counter.
[    0.632985]  #6
[    0.723821] NMI watchdog enabled, takes one hw-pmu counter.
[    0.723911]  #7
[    0.814748] NMI watchdog enabled, takes one hw-pmu counter.
[    0.814781] Brought up 8 CPUs
[    0.814783] Total of 8 processors activated (42757.37 BogoMIPS).
[    0.819376] sizeof(vma)=184 bytes
[    0.819379] sizeof(page)=56 bytes
[    0.819380] sizeof(inode)=600 bytes
[    0.819381] sizeof(dentry)=192 bytes
[    0.819382] sizeof(ext3inode)=816 bytes
[    0.819383] sizeof(ext4inode)=920 bytes
[    0.819384] sizeof(buffer_head)=104 bytes
[    0.819385] sizeof(skbuff)=240 bytes
[    0.819386] sizeof(task_struct)=5928 bytes
[    0.819554] devtmpfs: initialized
[    0.823687] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.823713] Time: 20:43:00  Date: 08/03/11
[    0.823750] NET: Registered protocol family 16
[    0.823900] ACPI: bus type pci registered
[    0.823971] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.823974] PCI: not using MMCONFIG
[    0.823975] PCI: Using configuration type 1 for base access
[    0.824956] bio: create slab <bio-0> at 0
[    0.826230] ACPI: EC: Look up EC in DSDT
[    0.827420] ACPI: Executed 1 blocks of module-level executable AML code
[    0.856670] ACPI: SSDT 00000000bf7980c0 00403 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.856949] ACPI: Dynamic OEM Table Load:
[    0.856952] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.857303] ACPI: SSDT 00000000bf7984d0 00403 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
[    0.857573] ACPI: Dynamic OEM Table Load:
[    0.857576] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P002Ist 00000012 INTL 20060113)
[    0.857932] ACPI: SSDT 00000000bf7988e0 00403 (v01 DpgPmm  P003Ist 00000012 INTL 20060113)
[    0.858205] ACPI: Dynamic OEM Table Load:
[    0.858207] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P003Ist 00000012 INTL 20060113)
[    0.858560] ACPI: SSDT 00000000bf798cf0 00403 (v01 DpgPmm  P004Ist 00000012 INTL 20060113)
[    0.858840] ACPI: Dynamic OEM Table Load:
[    0.858843] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P004Ist 00000012 INTL 20060113)
[    0.862010] ACPI: SSDT 00000000bf799100 00403 (v01 DpgPmm  P005Ist 00000012 INTL 20060113)
[    0.862289] ACPI: Dynamic OEM Table Load:
[    0.862291] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P005Ist 00000012 INTL 20060113)
[    0.865010] ACPI: SSDT 00000000bf799510 00403 (v01 DpgPmm  P006Ist 00000012 INTL 20060113)
[    0.865284] ACPI: Dynamic OEM Table Load:
[    0.865287] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P006Ist 00000012 INTL 20060113)
[    0.868011] ACPI: SSDT 00000000bf799920 00403 (v01 DpgPmm  P007Ist 00000012 INTL 20060113)
[    0.868288] ACPI: Dynamic OEM Table Load:
[    0.868290] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P007Ist 00000012 INTL 20060113)
[    0.873683] ACPI: SSDT 00000000bf799d30 00403 (v01 DpgPmm  P008Ist 00000012 INTL 20060113)
[    0.874003] ACPI: Dynamic OEM Table Load:
[    0.874005] ACPI: SSDT           (null) 00403 (v01 DpgPmm  P008Ist 00000012 INTL 20060113)
[    0.874190] ACPI: Interpreter enabled
[    0.874193] ACPI: (supports S0 S1 S3 S4 S5)
[    0.874214] ACPI: Using IOAPIC for interrupt routing
[    0.874237] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.875297] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.901030] ACPI: No dock devices found.
[    0.901032] HEST: Table not found.
[    0.901034] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.901114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.901279] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.901281] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.901283] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.901285] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.901288] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.901290] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[    0.901304] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[    0.901345] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.901349] pci 0000:00:00.0: PME# disabled
[    0.901370] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[    0.901412] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.901415] pci 0000:00:01.0: PME# disabled
[    0.901435] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[    0.901477] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.901480] pci 0000:00:03.0: PME# disabled
[    0.901501] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[    0.901542] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.901545] pci 0000:00:07.0: PME# disabled
[    0.901570] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[    0.901626] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[    0.901687] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[    0.901741] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[    0.901798] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[    0.901838] pci 0000:00:1a.0: reg 20: [io  0x9800-0x981f]
[    0.901880] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[    0.901919] pci 0000:00:1a.1: reg 20: [io  0x9880-0x989f]
[    0.901959] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[    0.901999] pci 0000:00:1a.2: reg 20: [io  0x9c00-0x9c1f]
[    0.902047] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[    0.902067] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[    0.902135] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.902139] pci 0000:00:1a.7: PME# disabled
[    0.902160] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[    0.902174] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[    0.902224] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.902227] pci 0000:00:1b.0: PME# disabled
[    0.902245] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[    0.902295] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.902299] pci 0000:00:1c.0: PME# disabled
[    0.902318] pci 0000:00:1c.2: [8086:3a44] type 1 class 0x000604
[    0.902369] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.902372] pci 0000:00:1c.2: PME# disabled
[    0.902392] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[    0.902443] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.902446] pci 0000:00:1c.4: PME# disabled
[    0.902465] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[    0.902515] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.902519] pci 0000:00:1c.5: PME# disabled
[    0.902541] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[    0.902581] pci 0000:00:1d.0: reg 20: [io  0x9080-0x909f]
[    0.902621] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[    0.902663] pci 0000:00:1d.1: reg 20: [io  0x9400-0x941f]
[    0.902704] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[    0.902743] pci 0000:00:1d.2: reg 20: [io  0x9480-0x949f]
[    0.902794] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[    0.902814] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[    0.902882] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.902886] pci 0000:00:1d.7: PME# disabled
[    0.902903] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.902955] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[    0.903031] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.903036] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[    0.903068] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[    0.903082] pci 0000:00:1f.2: reg 10: [io  0x8000-0x8007]
[    0.903090] pci 0000:00:1f.2: reg 14: [io  0x7c00-0x7c03]
[    0.903097] pci 0000:00:1f.2: reg 18: [io  0x7880-0x7887]
[    0.903104] pci 0000:00:1f.2: reg 1c: [io  0x7800-0x7803]
[    0.903111] pci 0000:00:1f.2: reg 20: [io  0x7480-0x748f]
[    0.903118] pci 0000:00:1f.2: reg 24: [io  0x7400-0x740f]
[    0.903152] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[    0.903166] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[    0.903185] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.903216] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[    0.903230] pci 0000:00:1f.5: reg 10: [io  0x9000-0x9007]
[    0.903237] pci 0000:00:1f.5: reg 14: [io  0x8c00-0x8c03]
[    0.903244] pci 0000:00:1f.5: reg 18: [io  0x8880-0x8887]
[    0.903251] pci 0000:00:1f.5: reg 1c: [io  0x8800-0x8803]
[    0.903259] pci 0000:00:1f.5: reg 20: [io  0x8480-0x848f]
[    0.903266] pci 0000:00:1f.5: reg 24: [io  0x8400-0x840f]
[    0.903328] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.903331] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.903335] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.903339] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.903380] pci 0000:02:00.0: [1002:6898] type 0 class 0x000300
[    0.903393] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.903403] pci 0000:02:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[    0.903409] pci 0000:02:00.0: reg 20: [io  0xa000-0xa0ff]
[    0.903421] pci 0000:02:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[    0.903438] pci 0000:02:00.0: supports D1 D2
[    0.903457] pci 0000:02:00.1: [1002:aa50] type 0 class 0x000403
[    0.903469] pci 0000:02:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[    0.903511] pci 0000:02:00.1: supports D1 D2
[    0.904657] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.904662] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    0.904666] pci 0000:00:03.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.904673] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.904716] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    0.904721] pci 0000:00:07.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.904726] pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.904732] pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.904773] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[    0.904776] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.904781] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.904787] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.904842] pci 0000:06:00.0: [11ab:4364] type 0 class 0x000200
[    0.904864] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[    0.904876] pci 0000:06:00.0: reg 18: [io  0xd800-0xd8ff]
[    0.904917] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[    0.904955] pci 0000:06:00.0: supports D1 D2
[    0.904956] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.904961] pci 0000:06:00.0: PME# disabled
[    0.906661] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[    0.906666] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.906671] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.906678] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.906745] pci 0000:05:00.0: [11ab:6121] type 0 class 0x000101
[    0.906760] pci 0000:05:00.0: reg 10: [io  0xcc00-0xcc07]
[    0.906772] pci 0000:05:00.0: reg 14: [io  0xc880-0xc883]
[    0.906783] pci 0000:05:00.0: reg 18: [io  0xc800-0xc807]
[    0.906796] pci 0000:05:00.0: reg 1c: [io  0xc480-0xc483]
[    0.906807] pci 0000:05:00.0: reg 20: [io  0xc400-0xc40f]
[    0.906818] pci 0000:05:00.0: reg 24: [mem 0xfbcffc00-0xfbcfffff]
[    0.906861] pci 0000:05:00.0: supports D1
[    0.906862] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[    0.906867] pci 0000:05:00.0: PME# disabled
[    0.906883] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.906888] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.906891] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.906894] pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.906900] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.906956] pci 0000:04:00.0: [11ab:4364] type 0 class 0x000200
[    0.906977] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[    0.906989] pci 0000:04:00.0: reg 18: [io  0xb800-0xb8ff]
[    0.907030] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[    0.907068] pci 0000:04:00.0: supports D1 D2
[    0.907069] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.907074] pci 0000:04:00.0: PME# disabled
[    0.908664] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.908669] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.908674] pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.908681] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.908721] pci 0000:08:02.0: [1106:3044] type 0 class 0x000c00
[    0.908741] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[    0.908755] pci 0000:08:02.0: reg 14: [io  0xec00-0xec7f]
[    0.908812] pci 0000:08:02.0: supports D2
[    0.908814] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[    0.908818] pci 0000:08:02.0: PME# disabled
[    0.908858] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[    0.908861] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.908865] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.908870] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.908872] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.908874] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.908876] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.908878] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.908881] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.908883] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[    0.908912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.909210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.909289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.909323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[    0.909355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.909386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.909416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[    0.909446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[    0.909476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[    0.909513]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.922738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.922779] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.922820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.922859] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.922899] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.922938] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.922978] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.923017] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[    0.923117] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.923121] vgaarb: loaded
[    0.923189] SCSI subsystem initialized
[    0.923243] libata version 3.00 loaded.
[    0.923284] usbcore: registered new interface driver usbfs
[    0.923299] usbcore: registered new interface driver hub
[    0.923322] usbcore: registered new device driver usb
[    0.923382] PCI: Using ACPI for IRQ routing
[    0.923384] PCI: pci_cache_line_size set to 64 bytes
[    0.923475] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.923477] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff 
[    0.923560] NetLabel: Initializing
[    0.923561] NetLabel:  domain hash size = 128
[    0.923562] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.923571] NetLabel:  unlabeled traffic allowed by default
[    0.923615] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.923620] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.923623] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.930765] Switching to clocksource hpet
[    0.930790] Switched to NOHz mode on CPU #4
[    0.931650] Switched to NOHz mode on CPU #0
[    0.931712] Switched to NOHz mode on CPU #2
[    0.931719] Switched to NOHz mode on CPU #7
[    0.931747] Switched to NOHz mode on CPU #1
[    0.931750] Switched to NOHz mode on CPU #6
[    0.931757] Switched to NOHz mode on CPU #3
[    0.931770] Switched to NOHz mode on CPU #5
[    0.937646] pnp: PnP ACPI init
[    0.937661] ACPI: bus type pnp registered
[    0.937746] pnp 00:00: [bus 00-ff]
[    0.937748] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.937750] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.937751] pnp 00:00: [io  0x0d00-0xffff window]
[    0.937753] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.937755] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.937757] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.937759] pnp 00:00: [mem 0xf0000000-0xfed8ffff window]
[    0.937799] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.937808] pnp 00:01: [mem 0xfbf00000-0xfbffffff]
[    0.937810] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[    0.937812] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[    0.937814] pnp 00:01: [mem 0xfe000000-0xfebfffff]
[    0.937815] pnp 00:01: [mem 0xfec8a000-0xfec8afff]
[    0.937817] pnp 00:01: [mem 0xfed10000-0xfed10fff]
[    0.937870] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[    0.937873] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.937875] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.937877] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.937880] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[    0.937882] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[    0.937885] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.937920] pnp 00:02: [dma 4]
[    0.937922] pnp 00:02: [io  0x0000-0x000f]
[    0.937924] pnp 00:02: [io  0x0081-0x0083]
[    0.937925] pnp 00:02: [io  0x0087]
[    0.937927] pnp 00:02: [io  0x0089-0x008b]
[    0.937928] pnp 00:02: [io  0x008f]
[    0.937930] pnp 00:02: [io  0x00c0-0x00df]
[    0.937956] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.937965] pnp 00:03: [io  0x0070-0x0071]
[    0.937974] pnp 00:03: [irq 8]
[    0.938001] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.938009] pnp 00:04: [io  0x0061]
[    0.938033] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.938040] pnp 00:05: [io  0x00f0-0x00ff]
[    0.938047] pnp 00:05: [irq 13]
[    0.938074] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.938239] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.938241] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.938243] pnp 00:06: [io  0x0290-0x029f]
[    0.938288] system 00:06: [io  0x0290-0x029f] has been reserved
[    0.938291] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.938417] pnp 00:07: [io  0x0010-0x001f]
[    0.938419] pnp 00:07: [io  0x0022-0x003f]
[    0.938421] pnp 00:07: [io  0x0044-0x004d]
[    0.938422] pnp 00:07: [io  0x0050-0x005f]
[    0.938424] pnp 00:07: [io  0x0062-0x0063]
[    0.938426] pnp 00:07: [io  0x0065-0x006f]
[    0.938427] pnp 00:07: [io  0x0072-0x007f]
[    0.938429] pnp 00:07: [io  0x0080]
[    0.938430] pnp 00:07: [io  0x0084-0x0086]
[    0.938432] pnp 00:07: [io  0x0088]
[    0.938433] pnp 00:07: [io  0x008c-0x008e]
[    0.938435] pnp 00:07: [io  0x0090-0x009f]
[    0.938436] pnp 00:07: [io  0x00a2-0x00bf]
[    0.938438] pnp 00:07: [io  0x00e0-0x00ef]
[    0.938439] pnp 00:07: [io  0x04d0-0x04d1]
[    0.938441] pnp 00:07: [io  0x0800-0x087f]
[    0.938443] pnp 00:07: [io  0x0400-0x03ff disabled]
[    0.938444] pnp 00:07: [io  0x0500-0x057f]
[    0.938446] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    0.938448] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[    0.938449] pnp 00:07: [mem 0xfed40000-0xfed8ffff]
[    0.938518] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.938521] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.938523] system 00:07: [io  0x0500-0x057f] has been reserved
[    0.938526] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.938528] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.938531] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.938534] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.938592] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.938623] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.938667] pnp 00:09: [mem 0xffa00000-0xffbfffff]
[    0.938669] pnp 00:09: [mem 0xffe00000-0xffffffff]
[    0.938697] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[    0.938733] pnp 00:0a: [mem 0xffc00000-0xffdfffff]
[    0.938779] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.938782] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.938855] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[    0.938857] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[    0.938911] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.938914] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.938916] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.938943] pnp 00:0c: [io  0x0060]
[    0.938945] pnp 00:0c: [io  0x0064]
[    0.938950] pnp 00:0c: [irq 1]
[    0.938983] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.939037] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    0.939083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    0.939086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.939234] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.939236] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    0.939237] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.939239] pnp 00:0e: [mem 0x00100000-0xbfffffff]
[    0.939241] pnp 00:0e: [mem 0xfed90000-0xffffffff]
[    0.939296] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.939298] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
[    0.939301] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.939303] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.939306] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.939308] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.939425] pnp: PnP ACPI: found 15 devices
[    0.939427] ACPI: ACPI bus type pnp unregistered
[    0.945804] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.945807] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.945810] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.945813] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.945816] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.945818] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.945820] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.945823] pci 0000:00:01.0:   bridge window [mem disabled]
[    0.945826] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    0.945831] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[    0.945833] pci 0000:00:03.0:   bridge window [io  0xa000-0xafff]
[    0.945837] pci 0000:00:03.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.945840] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.945845] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    0.945846] pci 0000:00:07.0:   bridge window [io  disabled]
[    0.945850] pci 0000:00:07.0:   bridge window [mem disabled]
[    0.945853] pci 0000:00:07.0:   bridge window [mem pref disabled]
[    0.945857] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[    0.945864] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.945869] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.945872] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.945877] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[    0.945880] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.945884] pci 0000:00:1c.2:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.945888] pci 0000:00:1c.2:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.945893] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.945895] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.945899] pci 0000:00:1c.4:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.945903] pci 0000:00:1c.4:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.945908] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.945910] pci 0000:00:1c.5:   bridge window [io  0xb000-0xbfff]
[    0.945915] pci 0000:00:1c.5:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.945918] pci 0000:00:1c.5:   bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.945924] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[    0.945926] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.945930] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.945933] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.945943] pci 0000:00:01.0: setting latency timer to 64
[    0.945949] pci 0000:00:03.0: setting latency timer to 64
[    0.945954] pci 0000:00:07.0: setting latency timer to 64
[    0.945959] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.945969] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.945973] pci 0000:00:1c.0: setting latency timer to 64
[    0.945982] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.945985] pci 0000:00:1c.2: setting latency timer to 64
[    0.945991] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.945994] pci 0000:00:1c.4: setting latency timer to 64
[    0.946003] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.946006] pci 0000:00:1c.5: setting latency timer to 64
[    0.946012] pci 0000:00:1e.0: setting latency timer to 64
[    0.946015] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.946017] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.946018] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.946020] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.946022] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.946024] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.946026] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.946028] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.946030] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.946032] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.946034] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.946036] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.946038] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    0.946040] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.946042] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.946045] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.946046] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.946049] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.946051] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
[    0.946053] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.946055] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[    0.946057] pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
[    0.946059] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.946061] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
[    0.946063] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
[    0.946065] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[    0.946067] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[    0.946069] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.946071] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[    0.946092] NET: Registered protocol family 2
[    0.946293] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.947227] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.948489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.948620] TCP: Hash tables configured (established 524288 bind 65536)
[    0.948622] TCP reno registered
[    0.948636] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.948672] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.948802] NET: Registered protocol family 1
[    0.948980] pci 0000:02:00.0: Boot video device
[    0.948994] PCI: CLS 64 bytes, default 64
[    0.949034] Trying to unpack rootfs image as initramfs...
[    1.202271] Freeing initrd memory: 14416k freed
[    1.204418] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.204422] Placing 64MB software IO TLB between ffff8800bb400000 - ffff8800bf400000
[    1.204424] software IO TLB at phys 0xbb400000 - 0xbf400000
[    1.205472] Intel AES-NI instructions are not detected.
[    1.205578] audit: initializing netlink socket (disabled)
[    1.205587] type=2000 audit(1312404179.899:1): initialized
[    1.217492] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.219688] VFS: Disk quotas dquot_6.5.2
[    1.219734] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.220181] msgmni has been set to 11941
[    1.220233] SELinux:  Registering netfilter hooks
[    1.220512] alg: No test for stdrng (krng)
[    1.220518] NET: Registered protocol family 38
[    1.220562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.220589] io scheduler noop registered
[    1.220590] io scheduler deadline registered
[    1.220626] io scheduler cfq registered (default)
[    1.220828] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.220867] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[    1.220922] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.220956] pcieport 0000:00:1c.2: irq 65 for MSI/MSI-X
[    1.221012] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.221046] pcieport 0000:00:1c.4: irq 66 for MSI/MSI-X
[    1.221099] pcieport 0000:00:1c.5: setting latency timer to 64
[    1.221133] pcieport 0000:00:1c.5: irq 67 for MSI/MSI-X
[    1.221208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.221230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.221231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.221533] intel_idle: MWAIT substates: 0x1120
[    1.221542] intel_idle: v0.4 model 0x1A
[    1.221544] intel_idle: lapic_timer_reliable_states 0x2
[    1.221660] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.221664] ACPI: Power Button [PWRB]
[    1.221707] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.221710] ACPI: Power Button [PWRF]
[    1.221884] ACPI: acpi_idle yielding to intel_idle
[    1.223351] ERST: Table is not found!
[    1.223429] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.247286] Non-volatile memory driver v1.3
[    1.247288] Linux agpgart interface v0.103
[    1.248490] brd: module loaded
[    1.249025] loop: module loaded
[    1.249091] ahci 0000:05:00.0: version 3.0
[    1.249116] ata_piix 0000:00:1f.2: version 2.13
[    1.249131] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.249136] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.249167] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.249457] scsi0 : ata_piix
[    1.249534] scsi1 : ata_piix
[    1.250952] ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[    1.250957] ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[    1.250977] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    1.250982] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.251013] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.251221] scsi2 : ata_piix
[    1.251284] scsi3 : ata_piix
[    1.252261] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[    1.252265] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[    1.252332] Fixed MDIO Bus: probed
[    1.252381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.252395] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.252416] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.252419] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.252471] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.254818] ehci_hcd 0000:00:1a.7: debug port 1
[    1.258714] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    1.258726] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[    1.267764] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.267805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.267808] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.267812] usb usb1: Product: EHCI Host Controller
[    1.267814] usb usb1: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 ehci_hcd
[    1.267817] usb usb1: SerialNumber: 0000:00:1a.7
[    1.267926] hub 1-0:1.0: USB hub found
[    1.267930] hub 1-0:1.0: 6 ports detected
[    1.268011] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.268022] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.268025] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.268062] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.268102] ehci_hcd 0000:00:1d.7: debug port 1
[    1.271984] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.271997] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[    1.281759] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.281783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.281788] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.281791] usb usb2: Product: EHCI Host Controller
[    1.281793] usb usb2: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 ehci_hcd
[    1.281796] usb usb2: SerialNumber: 0000:00:1d.7
[    1.281903] hub 2-0:1.0: USB hub found
[    1.281907] hub 2-0:1.0: 6 ports detected
[    1.281977] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.281989] uhci_hcd: USB Universal Host Controller Interface driver
[    1.282005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.282011] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.282013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.282049] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.282098] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[    1.282125] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.282127] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.282129] usb usb3: Product: UHCI Host Controller
[    1.282131] usb usb3: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.282133] usb usb3: SerialNumber: 0000:00:1a.0
[    1.282220] hub 3-0:1.0: USB hub found
[    1.282224] hub 3-0:1.0: 2 ports detected
[    1.282294] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.282300] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.282302] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.282347] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.282397] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[    1.282423] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.282425] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.282427] usb usb4: Product: UHCI Host Controller
[    1.282429] usb usb4: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.282430] usb usb4: SerialNumber: 0000:00:1a.1
[    1.282517] hub 4-0:1.0: USB hub found
[    1.282521] hub 4-0:1.0: 2 ports detected
[    1.282589] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.282594] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.282597] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.282634] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.282810] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[    1.282848] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.282850] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.282852] usb usb5: Product: UHCI Host Controller
[    1.282854] usb usb5: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.282855] usb usb5: SerialNumber: 0000:00:1a.2
[    1.282944] hub 5-0:1.0: USB hub found
[    1.282947] hub 5-0:1.0: 2 ports detected
[    1.283009] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.283014] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.283017] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.283060] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.283100] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[    1.283127] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.283129] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283131] usb usb6: Product: UHCI Host Controller
[    1.283133] usb usb6: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.283135] usb usb6: SerialNumber: 0000:00:1d.0
[    1.283221] hub 6-0:1.0: USB hub found
[    1.283225] hub 6-0:1.0: 2 ports detected
[    1.283291] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.283296] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.283299] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.283346] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.283387] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[    1.283413] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.283415] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283417] usb usb7: Product: UHCI Host Controller
[    1.283419] usb usb7: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.283421] usb usb7: SerialNumber: 0000:00:1d.1
[    1.283506] hub 7-0:1.0: USB hub found
[    1.283509] hub 7-0:1.0: 2 ports detected
[    1.283572] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.283577] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.283579] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.283614] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.283654] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[    1.283680] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.283682] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283684] usb usb8: Product: UHCI Host Controller
[    1.283686] usb usb8: Manufacturer: Linux 2.6.38.8-35.fc15.x86_64 uhci_hcd
[    1.283687] usb usb8: SerialNumber: 0000:00:1d.2
[    1.283786] hub 8-0:1.0: USB hub found
[    1.283789] hub 8-0:1.0: 2 ports detected
[    1.283909] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.283911] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.284393] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.284460] mousedev: PS/2 mouse device common for all mice
[    1.284596] rtc_cmos 00:03: RTC can wake from S4
[    1.284659] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.284683] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.284778] device-mapper: uevent: version 1.0.3
[    1.284848] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    1.285081] cpuidle: using governor ladder
[    1.285376] cpuidle: using governor menu
[    1.285510] usbcore: registered new interface driver usbhid
[    1.285511] usbhid: USB HID core driver
[    1.285534] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.285653] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.285669] TCP cubic registered
[    1.285670] Initializing XFRM netlink socket
[    1.285683] NET: Registered protocol family 17
[    1.285695] Registering the dns_resolver key type
[    1.285800] PM: Hibernation image not present or could not be loaded.
[    1.285808] registered taskstats version 1
[    1.286047] IMA: No TPM chip found, activating TPM-bypass!
[    1.286436]   Magic number: 7:44:750
[    1.286443] ata_link link1: hash matches
[    1.286444]  link1: hash matches
[    1.286447] tty ttyS1: hash matches
[    1.286513] rtc_cmos 00:03: setting system clock to 2011-08-03 20:43:01 UTC (1312404181)
[    1.286563] Initalizing network drop monitor service
[    1.302837] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.567533] ata3: SATA link down (SStatus 0 SControl 300)
[    1.578304] ata4: SATA link down (SStatus 0 SControl 300)
[    1.578319] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.692039] usb 1-5: New USB device found, idVendor=0409, idProduct=005a
[    1.692044] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.692325] hub 1-5:1.0: USB hub found
[    1.692407] hub 1-5:1.0: 4 ports detected
[    2.000582] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    2.011708] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.011721] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.011839] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.011851] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.034089] ata2.00: ATA-7: SAMSUNG SP2504C, VT100-52, max UDMA7
[    2.034093] ata2.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.034317] ata2.01: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[    2.034321] ata2.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.049970] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[    2.049975] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.049984] ata1.01: ATAPI: PLEXTOR BD-R   PX-B940SA, 1.03, max UDMA/100
[    2.087846] ata1.00: configured for UDMA/133
[    2.090845] ata2.00: configured for UDMA/133
[    2.093773] ata1.01: configured for UDMA/100
[    2.094357] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.094507] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.097380] ata2.01: configured for UDMA/133
[    2.104459] scsi 0:0:1:0: CD-ROM            PLEXTOR  BD-R   PX-B940SA 1.03 PQ: 0 ANSI: 5
[    2.104517] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.124363] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.124367] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.124507] sd 0:0:0:0: [sda] Write Protect is off
[    2.124515] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.124520] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.124567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.124574] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.124715] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.124826] sd 1:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[    2.124860] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.124891] sd 1:0:0:0: [sdb] Write Protect is off
[    2.124895] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.124923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.124974] scsi 1:0:1:0: Direct-Access     ATA      WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[    2.125152] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    2.128847] sd 1:0:1:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.128849]  sdb: sdb1 sdb2
[    2.128932] sd 1:0:1:0: [sdc] Write Protect is off
[    2.128935] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    2.128962] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.133823]  sda: sda1 sda2
[    2.134273] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.140065]  sdc: sdc1
[    2.140514] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.140521] sd 1:0:1:0: [sdc] Attached SCSI disk
[    2.143030] Freeing unused kernel memory: 948k freed
[    2.143156] Write protecting the kernel read-only data: 10240k
[    2.150254] Freeing unused kernel memory: 1516k freed
[    2.157811] Freeing unused kernel memory: 1684k freed
[    2.167178] usb 7-1: New USB device found, idVendor=046d, idProduct=c049
[    2.167181] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.167184] usb 7-1: Product: USB Gaming Mouse
[    2.167185] usb 7-1: Manufacturer: Logitech
[    2.175313] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3
[    2.175403] generic-usb 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-1/input0
[    2.179295] generic-usb 0003:046D:C049.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.1-1/input1
[    2.188916] dracut: dracut-009-11.fc15
[    2.197303] dracut: rd.luks=0: removing cryptoluks activation
[    2.205594] Refined TSC clocksource calibration: 2672.725 MHz.
[    2.205598] Switching to clocksource tsc
[    2.206362] udev[144]: starting version 167
[    2.240305] [drm] Initialized drm 1.1.0 20060810
[    2.267243] [drm] radeon defaulting to kernel modesetting.
[    2.267245] [drm] radeon kernel modesetting enabled.
[    2.267331] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    2.267335] radeon 0000:02:00.0: setting latency timer to 64
[    2.268385] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6898).
[    2.268546] [drm] register mmio base: 0xFBAC0000
[    2.268547] [drm] register mmio size: 131072
[    2.268633] ATOM BIOS: CYPRESS
[    2.268652] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.268655] radeon 0000:02:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.271356] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.271358] [drm] RAM width 256bits DDR
[    2.271422] [TTM] Zone  kernel: Available graphics memory: 3059076 kiB.
[    2.271424] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    2.271426] [TTM] Initializing pool allocator.
[    2.271440] [drm] radeon: 1024M of VRAM memory ready
[    2.271442] [drm] radeon: 512M of GTT memory ready.
[    2.271459] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.271460] [drm] Driver supports precise vblank timestamp query.
[    2.271498] radeon 0000:02:00.0: irq 68 for MSI/MSI-X
[    2.271503] radeon 0000:02:00.0: radeon: using MSI.
[    2.271536] [drm] radeon: irq initialized.
[    2.271538] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.271979] [drm] Loading CYPRESS Microcode
[    2.278363] radeon 0000:02:00.0: WB enabled
[    2.295146] [drm] ring test succeeded in 1 usecs
[    2.295257] [drm] radeon: ib pool ready.
[    2.295365] [drm] ib test succeeded in 0 usecs
[    2.295371] failed to evaluate ATIF got AE_BAD_PARAMETER
[    2.295824] [drm] Radeon Display Connectors
[    2.295825] [drm] Connector 0:
[    2.295827] [drm]   DisplayPort
[    2.295828] [drm]   HPD4
[    2.295829] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.295831] [drm]   Encoders:
[    2.295832] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.295833] [drm] Connector 1:
[    2.295834] [drm]   HDMI-A
[    2.295835] [drm]   HPD5
[    2.295837] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.295838] [drm]   Encoders:
[    2.295839] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.295840] [drm] Connector 2:
[    2.295841] [drm]   DVI-I
[    2.295842] [drm]   HPD1
[    2.295844] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    2.295845] [drm]   Encoders:
[    2.295846] [drm]     DFP3: INTERNAL_UNIPHY1
[    2.295848] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.295849] [drm] Connector 3:
[    2.295850] [drm]   DVI-I
[    2.295851] [drm]   HPD6
[    2.295852] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    2.295854] [drm]   Encoders:
[    2.295855] [drm]     DFP4: INTERNAL_UNIPHY
[    2.295856] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.427872] [drm] Internal thermal controller with fan control
[    2.427928] [drm] radeon: power management initialized
[    2.571024] [drm] fb mappable at 0xD0141000
[    2.571025] [drm] vram apper at 0xD0000000
[    2.571027] [drm] size 8294400
[    2.571028] [drm] fb depth is 24
[    2.571029] [drm]    pitch is 7680
[    2.571085] fbcon: radeondrmfb (fb0) is primary device
[    2.574581] [drm] force priority to high
[    2.974314] [drm] force priority to high
[    2.997463] Console: switching to colour frame buffer device 240x67
[    3.003781] fb0: radeondrmfb frame buffer device
[    3.003782] drm: registered panic notifier
[    3.003792] [drm] Initialized radeon 2.10.0 20080528 for 0000:02:00.0 on minor 0
[    3.027061] dracut: Starting plymouth daemon
[    3.211608] [drm] force priority to high
[    3.220165] dracut: rd.dm=0: removing DM RAID activation
[    3.222643] dracut: rd.md=0: removing MD RAID activation
[    3.252519] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.252543] pata_marvell 0000:05:00.0: setting latency timer to 64
[    3.252941] scsi4 : pata_marvell
[    3.253033] scsi5 : pata_marvell
[    3.253111] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16
[    3.253113] ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16
[    3.586843] firewire_ohci 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.640131] firewire_ohci: Added fw-ohci device 0000:08:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    3.660448] dracut: Scanning devices sda2  for LVM logical volumes vg_pluton/lv_root vg_pluton/lv_swap
[    3.675259] dracut: inactive '/dev/vg_pluton/lv_swap' [7.84 GiB] inherit
[    3.675303] dracut: inactive '/dev/vg_pluton/lv_home' [174.53 GiB] inherit
[    3.675346] dracut: inactive '/dev/vg_pluton/lv_root' [50.00 GiB] inherit
[    3.960131] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    4.038921] dracut: Checking filesystems
[    4.038940] dracut: fsck -T -t noopts=_netdev -A -a
[    4.082028] dracut: /dev/mapper/vg_pluton-lv_root: clean, 166873/3276800 files, 1890877/13107200 blocks
[    4.082204] dracut: Remounting /dev/mapper/vg_pluton-lv_root with -o ro,
[    4.090019] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[    4.100464] dracut: Mounted root filesystem /dev/mapper/vg_pluton-lv_root
[    4.141042] firewire_core: created device fw0: GUID 001e8c0001feef6e, S400
[    4.278473] dracut: Switching root
[    4.840344] type=1404 audit(1312404185.053:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    5.095382] SELinux: 2048 avtab hash slots, 224118 rules.
[    5.164076] SELinux: 2048 avtab hash slots, 224118 rules.
[    5.419203] SELinux:  9 users, 13 roles, 3622 types, 192 bools, 1 sens, 1024 cats
[    5.419207] SELinux:  81 classes, 224118 rules
[    5.425797] SELinux:  Completing initialization.
[    5.425798] SELinux:  Setting up existing superblocks.
[    5.425805] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    5.425810] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    5.425820] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    5.425825] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    5.425831] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.425843] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    5.426316] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    5.426320] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    5.426888] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    5.426893] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    5.426897] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    5.426908] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.426916] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    5.426921] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    5.426933] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    5.426939] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    5.426943] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    5.427301] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.427306] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.427595] SELinux: initialized (dev dm-1, type ext4), uses xattr
[    5.430028] type=1403 audit(1312404185.643:3): policy loaded auid=4294967295 ses=4294967295
[    5.593611] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.594038] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.715806] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.724336] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.724667] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.729339] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.734338] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.739321] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.744318] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.749317] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.754356] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.776704] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[    6.063124] NET: Registered protocol family 10
[    6.086152] systemd[1]: Set hostname to <pluton>.
[    7.128712] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    7.130074] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    7.130296] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    7.152097] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    7.152389] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[   11.975467] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[   11.976584] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   12.223870] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   13.610233] udev[466]: starting version 167
[   13.700276] EDAC MC: Ver: 2.1.0 Jul  6 2011
[   13.702795] EDAC i7core: Driver loaded.
[   13.714291] wmi: Mapper loaded
[   13.725722] sky2: driver version 1.28
[   13.725765] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   13.725779] sky2 0000:06:00.0: setting latency timer to 64
[   13.725838] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[   13.725943] sky2 0000:06:00.0: irq 69 for MSI/MSI-X
[   13.726262] sky2 0000:06:00.0: eth0: addr 00:26:18:9f:4a:de
[   13.726281] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.726291] sky2 0000:04:00.0: setting latency timer to 64
[   13.726320] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[   13.726420] sky2 0000:04:00.0: irq 70 for MSI/MSI-X
[   13.726699] sky2 0000:04:00.0: eth1: addr 00:26:18:9f:4a:dd
[   13.726929] iTCO_vendor_support: vendor-support=0
[   13.728984] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   13.729054] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   13.729059] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[   13.729062] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.729096] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[   13.729167] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.733852] mtp-probe[574]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1"
[   13.759164] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
[   13.759174] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
[   13.759183] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
[   13.759193] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
[   13.759203] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
[   13.759212] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
[   13.759221] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
[   13.759229] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
[   13.759287] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.994641] mtp-probe[574]: bus: 7, device: 2 was not an MTP device
[   15.427871] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.427977] HDA Intel 0000:00:1b.0: irq 71 for MSI/MSI-X
[   15.428001] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.811690] hda_codec: AD1989B: BIOS auto-probing.
[   15.811696] ALSA sound/pci/hda/hda_codec.c:4633: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
[   15.811699] ALSA sound/pci/hda/hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.811701] ALSA sound/pci/hda/hda_codec.c:4641:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   15.811704] ALSA sound/pci/hda/hda_codec.c:4642:    mono: mono_out=0x0
[   15.811706] ALSA sound/pci/hda/hda_codec.c:4645:    dig-out=0x1b/0x1d
[   15.811708] ALSA sound/pci/hda/hda_codec.c:4646:    inputs:
[   15.811709] ALSA sound/pci/hda/hda_codec.c:4652: 
[   15.816708] HDA Intel 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
[   15.816809] HDA Intel 0000:02:00.1: irq 72 for MSI/MSI-X
[   15.816839] HDA Intel 0000:02:00.1: setting latency timer to 64
[   16.481742] udev[505]: renamed network interface eth1 to p37p1
[   16.486738] udev[490]: renamed network interface eth0 to p34p1
[   16.666307] Adding 8224764k swap on /dev/mapper/vg_pluton-lv_swap.  Priority:0 extents:1 across:8224764k 
[   18.890841] systemd-fsck[708]: /dev/sda1 : propre, 45/128016 fichiers, 89353/512000 blocs
[   19.042031] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.066286] SELinux: initialized (dev sda1, type ext4), uses xattr
[   20.006189] systemd-fsck[742]: /dev/mapper/vg_pluton-lv_home : propre, 26256/11444224 fichiers, 3889836/45752320 blocs
[   20.254132] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   20.254138] SELinux: initialized (dev dm-2, type ext4), uses xattr
[   20.748254] avahi-daemon[780]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[   20.748560] avahi-daemon[780]: Successfully dropped root privileges.
[   20.748728] avahi-daemon[780]: avahi-daemon 0.6.30 starting up.
[   20.804777] abrtd[783]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
[   20.828337] NetworkManager[792]: <info> NetworkManager (version 0.8.9997-5.git20110702.fc15) is starting...
[   20.828348] NetworkManager[792]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[   20.845416] ntpd[796]: ntpd 4.2.6p3@1.2290-o Fri May  6 16:26:49 UTC 2011 (1)
[   20.845574] ntpd[796]: proto: precision = 0.052 usec
[   20.845583] ntpd[796]: 0.0.0.0 c01d 0d kern kernel time sync enabled
[   20.845956] ntpd[796]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
[   20.846228] ntpd[796]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
[   20.847682] ntpd[796]: Listen and drop on 1 v6wildcard :: UDP 123
[   20.847956] ntpd[796]: Listen normally on 2 lo 127.0.0.1 UDP 123
[   20.847965] ntpd[796]: Listen normally on 3 lo ::1 UDP 123
[   20.847980] ntpd[796]: peers refreshed
[   20.848207] ntpd[796]: Listening on routing socket on fd #20 for interface updates
[   20.849747] ntpd[796]: Deferring DNS for 0.fedora.pool.ntp.org 1
[   20.860971] ntpd[796]: Deferring DNS for 1.fedora.pool.ntp.org 1
[   20.861129] ntpd[796]: Deferring DNS for 2.fedora.pool.ntp.org 1
[   20.861366] ntpd[796]: Deferring DNS for 3.fedora.pool.ntp.org 1
[   20.861584] ntpd[796]: 0.0.0.0 c016 06 restart
[   20.861611] ntpd[796]: 0.0.0.0 c012 02 freq_set kernel 2.767 PPM
[   20.861702] ntpd[798]: signal_no_reset: signal 17 had flags 4000000
[   20.972328] smartd[801]: smartd 5.41 2011-06-09 r3365 [x86_64-linux-2.6.38.8-35.fc15.x86_64] (local build)
[   20.972342] smartd[801]: Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
[   20.972467] smartd[801]: Opened configuration file /etc/smartd.conf
[   20.972586] smartd[801]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
[   20.977061] smartd[801]: Device: /dev/sda, type changed from 'scsi' to 'sat'
[   20.977095] smartd[801]: Device: /dev/sda [SAT], opened
[   20.980731] smartd[801]: Device: /dev/sda [SAT], SAMSUNG SP2504C, S/N:S09QJ1RP313816, FW:VT100-50, 250 GB
[   20.982787] smartd[801]: Device: /dev/sda [SAT], found in smartd database.
[   20.982829] smartd[801]: Device: /dev/sda [SAT], WARNING: May need -F samsung3 enabled; see manual for details.
[   20.986946] acpid[804]: starting up with netlink and the input layer
[   20.987201] acpid[804]: skipping incomplete file /etc/acpi/events/videoconf
[   20.987269] acpid[804]: 1 rule loaded
[   20.987401] acpid[804]: waiting for events: event logging is off
[   21.335341] smartd[801]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
[   21.338810] smartd[801]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
[   21.338886] smartd[801]: Device: /dev/sdb [SAT], opened
[   21.342392] smartd[801]: Device: /dev/sdb [SAT], SAMSUNG SP2504C, S/N:S0WRJ1MP535095, FW:VT100-52, 250 GB
[   21.344606] smartd[801]: Device: /dev/sdb [SAT], found in smartd database.
[   21.344683] smartd[801]: Device: /dev/sdb [SAT], WARNING: May need -F samsung3 enabled; see manual for details.
[   21.379608] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   21.430543] dbus[854]: avc:  netlink poll: error 4
[   21.437015] abrtd[783]: Init complete, entering main loop
[   21.437028] avahi-daemon[780]: Successfully called chroot().
[   21.438022] avahi-daemon[780]: Successfully dropped remaining capabilities.
[   21.438256] avahi-daemon[780]: Loading service file /services/ssh.service.
[   21.438385] avahi-daemon[780]: Loading service file /services/udisks.service.
[   21.439107] avahi-daemon[780]: Network interface enumeration completed.
[   21.439199] avahi-daemon[780]: Registering HINFO record with values 'X86_64'/'LINUX'.
[   21.439371] avahi-daemon[780]: Server startup complete. Host name is pluton.local. Local service cookie is 2609781082.
[   21.439436] avahi-daemon[780]: Service "pluton" (/services/udisks.service) successfully established.
[   21.439470] avahi-daemon[780]: Service "pluton" (/services/ssh.service) successfully established.
[   21.441683] NetworkManager[792]: <info> VPN: loaded org.freedesktop.NetworkManager.openconnect
[   21.441768] NetworkManager[792]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp
[   21.441834] NetworkManager[792]: <info> VPN: loaded org.freedesktop.NetworkManager.openvpn
[   21.441899] NetworkManager[792]: <info> VPN: loaded org.freedesktop.NetworkManager.vpnc
[   21.446460] dbus[854]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
[   21.488664] polkitd[866]: started daemon version 0.101 using authority implementation `local' version `0.101'
[   21.489748] dbus[854]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
[   21.495049] NetworkManager[792]: ifcfg-rh: Acquired D-Bus service com.redhat.ifcfgrh1
[   21.495079] NetworkManager[792]: <info> Loaded plugin ifcfg-rh: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
[   21.495255] NetworkManager[792]: <info> Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
[   21.495463] NetworkManager[792]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-p37p1 ...
[   21.496422] NetworkManager[792]: ifcfg-rh:     read connection 'eth0'
[   21.496443] NetworkManager[792]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Orion_1 ...
[   21.497321] NetworkManager[792]: ifcfg-rh:     read connection 'Orion 1'
[   21.497334] NetworkManager[792]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-p34p1 ...
[   21.502112] NetworkManager[792]: ifcfg-rh:     read connection 'System p34p1'
[   21.502137] NetworkManager[792]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-Orion ...
[   21.502920] NetworkManager[792]: ifcfg-rh:     read connection 'Orion'
[   21.502940] NetworkManager[792]: ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-lo ...
[   21.504185] NetworkManager[792]: <info> trying to start the modem manager...
[   21.505736] NetworkManager[792]: <info> monitoring kernel firmware directory '/lib/firmware'.
[   21.505892] dbus[854]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
[   21.506578] dbus[854]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
[   21.508350] NetworkManager[792]: <info> WiFi enabled by radio killswitch; disabled by state file
[   21.508380] NetworkManager[792]: <info> WWAN enabled by radio killswitch; enabled by state file
[   21.508399] NetworkManager[792]: <info> WiMAX enabled by radio killswitch; enabled by state file
[   21.508421] NetworkManager[792]: <info> Networking is enabled by state file
[   21.510723] NetworkManager[792]: <info> (p34p1): carrier is OFF
[   21.510782] NetworkManager[792]: <info> (p34p1): new Ethernet device (driver: 'sky2' ifindex: 2)
[   21.510824] NetworkManager[792]: <info> (p34p1): exported as /org/freedesktop/NetworkManager/Devices/0
[   21.511317] NetworkManager[792]: <info> (p34p1): now managed
[   21.511347] NetworkManager[792]: <info> (p34p1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
[   21.511382] NetworkManager[792]: <info> (p34p1): bringing up device.
[   21.511774] modem-manager[870]: <info>  ModemManager (version 0.4.998-1.git20110706.fc15) starting...
[   21.514640] sky2 0000:06:00.0: p34p1: enabling interface
[   21.514991] dbus[854]: [system] Successfully activated service 'org.freedesktop.ModemManager'
[   21.515703] ADDRCONF(NETDEV_UP): p34p1: link is not ready
[   21.515844] NetworkManager[792]: <info> (p34p1): preparing device.
[   21.515855] NetworkManager[792]: <info> (p34p1): deactivating device (reason: 2).
[   21.516019] modem-manager[870]: <info>  Loaded plugin Sierra
[   21.516256] modem-manager[870]: <info>  Loaded plugin MotoC
[   21.516479] modem-manager[870]: <info>  Loaded plugin AnyData
[   21.516710] modem-manager[870]: <info>  Loaded plugin Huawei
[   21.516960] modem-manager[870]: <info>  Loaded plugin SimTech
[   21.517188] modem-manager[870]: <info>  Loaded plugin ZTE
[   21.517410] modem-manager[870]: <info>  Loaded plugin Gobi
[   21.517632] modem-manager[870]: <info>  Loaded plugin X22X
[   21.517878] modem-manager[870]: <info>  Loaded plugin Samsung
[   21.517963] NetworkManager[792]: <info> (p37p1): carrier is OFF
[   21.518044] NetworkManager[792]: <info> (p37p1): new Ethernet device (driver: 'sky2' ifindex: 3)
[   21.518087] NetworkManager[792]: <info> (p37p1): exported as /org/freedesktop/NetworkManager/Devices/1
[   21.518250] modem-manager[870]: <info>  Loaded plugin Wavecom
[   21.518325] NetworkManager[792]: <info> (p37p1): now managed
[   21.518352] NetworkManager[792]: <info> (p37p1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
[   21.518384] NetworkManager[792]: <info> (p37p1): bringing up device.
[   21.518563] modem-manager[870]: <info>  Loaded plugin Longcheer
[   21.518792] modem-manager[870]: <info>  Loaded plugin Linktop
[   21.519011] modem-manager[870]: <info>  Loaded plugin Generic
[   21.519222] modem-manager[870]: <info>  Loaded plugin Option
[   21.519431] modem-manager[870]: <info>  Loaded plugin Option High-Speed
[   21.519647] modem-manager[870]: <info>  Loaded plugin Ericsson MBM
[   21.519859] modem-manager[870]: <info>  Loaded plugin Novatel
[   21.520090] modem-manager[870]: <info>  Loaded plugin Nokia
[   21.521638] sky2 0000:04:00.0: p37p1: enabling interface
[   21.522679] ADDRCONF(NETDEV_UP): p37p1: link is not ready
[   21.523031] NetworkManager[792]: <info> (p37p1): preparing device.
[   21.523044] NetworkManager[792]: <info> (p37p1): deactivating device (reason: 2).
[   21.524634] NetworkManager[792]: <info> modem-manager is now available
[   21.524645] /usr/sbin/crond[802]: (CRON) INFO (running with inotify support)
[   21.575508] Bluetooth: Core ver 2.15
[   21.575768] NET: Registered protocol family 31
[   21.575770] Bluetooth: HCI device and connection manager initialized
[   21.575773] Bluetooth: HCI socket layer initialized
[   21.582212] Bluetooth: L2CAP ver 2.15
[   21.582214] Bluetooth: L2CAP socket layer initialized
[   21.599510] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.599513] Bluetooth: BNEP filters: protocol multicast
[   21.603743] Bluetooth: SCO (Voice Link) ver 0.6
[   21.603745] Bluetooth: SCO socket layer initialized
[   22.474396] sshd (1024): /proc/1024/oom_adj is deprecated, please use /proc/1024/oom_score_adj instead.
[   22.572590] RPC: Registered udp transport module.
[   22.572592] RPC: Registered tcp transport module.
[   22.572594] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.578245] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[   23.222870] sky2 0000:04:00.0: p37p1: Link is up at 100 Mbps, full duplex, flow control both
[   23.223408] ADDRCONF(NETDEV_CHANGE): p37p1: link becomes ready
[   23.865239] lp: driver loaded but no devices found
[   23.880531] ppdev: user-space parallel port driver
[   33.391910] p37p1: no IPv6 routers present
[   37.136686] [drm:atom_dp_get_link_status] *ERROR* displayport link status failed
[   37.646567] [drm:atom_dp_get_link_status] *ERROR* displayport link status failed
[  152.189132] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[  166.081413] fuse init (API version 7.16)
[  166.108693] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[  166.185250] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

La partie interessante à la fin :
[ 37.136686] [drm:atom_dp_get_link_status] *ERROR* displayport link status failed
[ 37.646567] [drm:atom_dp_get_link_status] *ERROR* displayport link status failed
[ 152.189132] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 166.081413] fuse init (API version 7.16)

Il se trouve que depuis quelque temps aussi je subis régulièrement des freezes en cours d'utilisation (durée aléatoire avant freeze). Le freeze me bloque complètement clavier et souris, du coup plus moyen de retrouver un terminal pour effectuer un reboot plus "propre" que celui avec le bouton de la tour.

Autre cas intéressant : si j'appuie sur le bouton d'alimentation alors qu'il à freezé, il se met quand même en veille (commme en fonctionnement normal), mais reste figé à la reprise.

Si vous avez des idées ... je suis preneur.