Pour moi :
# cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.10 GHz
available frequency steps: 2.10 GHz, 2.10 GHz, 1.60 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, userspace, performance
current policy: frequency should be within 800 MHz and 2.10 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz (asserted by call to hardware).
boost state support:
Supported: no
Active: no
# cpupower monitor
|Mperf || Idle_Stats
CPU | C0 | Cx | Freq || POLL | C1 | C2 | C3
0| 35.76| 64.24| 798|| 0.00| 0.00| 6.15| 78.66
1| 34.91| 65.09| 798|| 0.00| 0.00| 19.31| 66.12
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +41.5°C (crit = +104.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +75.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +41.0°C (high = +105.0°C, crit = +105.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +42.0°C (high = +105.0°C, crit = +105.0°C)
[edit] Bon en fait le calcul du temps semble vraiment foireux. Là il m'affiche 0 minutes restantes avec 35% de batterie...