bonjour
je voudrais juste savoir a quoi corresponde chaque ligne de la commande sensors
# sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0°C (high = +70.0°C, crit = +70.0°C)
it8720-isa-0228
Adapter: ISA adapter
in0: +1.15 V (min = +0.00 V, max = +4.08 V)
in1: +1.49 V (min = +0.00 V, max = +4.08 V)
in2: +3.30 V (min = +0.00 V, max = +4.08 V)
in3: +2.98 V (min = +0.00 V, max = +4.08 V)
in4: +3.01 V (min = +0.00 V, max = +4.08 V)
in5: +1.39 V (min = +0.00 V, max = +4.08 V)
in6: +3.30 V (min = +0.00 V, max = +4.08 V)
in7: +2.13 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.10 V
fan1: 666 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan5: 1415 RPM (min = 0 RPM)
temp1: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +31.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +81.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +1.050 V
j'aimerais avoir la température du proc, de la carte vidéo et aussi la vitesse des ventilateurs (fan1 et fan2) qui s'affiche dans le tableau de bord
j'ai installer GNOME Sensors Applet 2.2.5 mais je ne sais pas a quoi corresponde chaque température
pourriez vous me renseigner
merci
