Ha?
Tu voudrais dire, barrettes défectueuses ?

Qu'est-ce qui te choque dans le top?
ELLGringo

Je ne pense pas car je n'ai pas une config faiblarde et c'est pas mieux que toi !!! Et ce n'est pas les barrettes car en f12 et f13, c'est de la balle !

Y'avait rien dans les logs qui puissent m'indiquer le problème ... J'ai cherché, cherché, cherché ... et j'ai fini par "downgrader" en f13 !!!

Là, ça tourne du feu de Dieu !!!

Je ne sais vraiment pas quoi faire pour résoudre ce problème et passer en f14 ... Désolé 🙁
ELLGringo wrote: Kernel 2.6.35.9-64.fc14.x86_64, kmod-nvidia-2.6.35.6-48.fc14.x86_64.x86_64.
Bonsoir,

Le problème ne vient-il pas d'une incohérence kernel / module nvidia, ou conflit entre module nvidia libre et propriétaire?

Que donne un lsmod ?
@none, je suis pas vraiment chaud pour un downgrade à vrai dire.
Merci pour le lien !


@cursedman, voilà le lsmod:
Module                  Size  Used by
usb_storage            45875  1 
fuse                   61363  5 
sunrpc                201180  1 
cpufreq_ondemand        9278  2 
acpi_cpufreq            7329  0 
freq_table              3955  2 cpufreq_ondemand,acpi_cpufreq
mperf                   1481  1 acpi_cpufreq
ip6t_REJECT             4279  2 
nf_conntrack_ipv6      18078  6 
ip6table_filter         1687  1 
ip6_tables             17481  1 ip6table_filter
ipv6                  286354  38 ip6t_REJECT,nf_conntrack_ipv6
uinput                  7368  0 
nvidia              10217025  38 
snd_hda_codec_realtek   298179  1 
snd_hda_intel          24399  4 
snd_hda_codec          86743  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6392  1 snd_hda_codec
snd_seq                53791  0 
snd_seq_device          6191  1 snd_seq
atl1                   30604  0 
mii                     4310  1 atl1
snd_pcm                80190  3 snd_hda_intel,snd_hda_codec
asus_atk0110           15388  0 
iTCO_wdt               11256  0 
iTCO_vendor_support     2610  1 iTCO_wdt
snd_timer              19892  2 snd_seq,snd_pcm
snd                    63984  15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
i2c_i801               11088  0 
i2c_core               26900  2 nvidia,i2c_i801
soundcore               6576  1 snd
snd_page_alloc          7559  2 snd_hda_intel,snd_pcm
microcode              18548  0 
serio_raw               4640  0 
joydev                  9769  0 
firewire_ohci          21106  0 
firewire_core          45817  1 firewire_ohci
crc_itu_t               1563  1 firewire_core
ET pour le kmod, j'ai copié la mauvaise ligne.
Mais c'est étrange d'avoir de Kmod différent d'installés non?
[root@F14 ~]# yum list kmod*
Modules complémentaires chargés : langpacks, presto, refresh-packagekit
Adding fr_FR to language list
Paquets installés
kmod-nvidia.x86_64                                 1:260.19.21-1.fc14.1         @rpmfusion-nonfree-updates
kmod-nvidia-2.6.35.6-48.fc14.x86_64.x86_64         1:260.19.21-1.fc14           @rpmfusion-nonfree-updates
kmod-nvidia-2.6.35.9-64.fc14.x86_64.x86_64         1:260.19.21-1.fc14.1         @rpmfusion-nonfree-updates
Alors, pour réponse à ta question :


[root@F14 ~]# cat /var/log/Xorg.0.log |grep EE && cat /var/log/Xorg.0.log |grep WW 
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  7687.753] (II) Loading extension MIT-SCREEN-SAVER
[  7689.133] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  7687.750] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  7687.750] (WW) Disabling Keyboard0
[  7687.750] (WW) Disabling Mouse0
Dans le Bios, tout est bon.
J'ai viré le Kmod ne correspondant pas au kernel actuel.

Le souci est toujours là.

Là, pour me logguer, il a bien 20 sec...
ELLGringo wrote:Mais c'est étrange d'avoir de Kmod différent d'installés non?
Non, si tu as le kernel 2.6.35.6-48 ( kernel précédent le 2.6.35.9-64 ) qui est installé, c'est normal. Par défaut, yum garde 3 versions de kernel et donc aussi 3 versions de kmod-nvidia. A la 4ème version, la 1ère sera effacée ( la plus vieille )
Oui je savais pour les kernels, mais j'ai jamais fais attention pour les kmods.
D'ailleurs c'est étrange car j'ai trois kernels, mais seulement deux kmods...
ELLGringo wrote:Oui je savais pour les kernels, mais j'ai jamais fais attention pour les kmods.
D'ailleurs c'est étrange car j'ai trois kernels, mais seulement deux kmods...
Tu en as viré un, non ?
ELLGringo wrote:J'ai viré le Kmod ne correspondant pas au kernel actuel.
Pour éviter les problèmes de compatibilité kernel/kmod, il y a les akmod. Ils recompilent le module concerné au boot du nouveau kernel.

Que donne un dmesg ? (je pense à des erreurs éventuelles au démarrage).
@Fifi, oui, j'ai viré un kmod.

@ cursedman, voilà le (long) dmesg.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35.9-64.fc14.x86_64 (mockbuild@x86-16.phx2.fedoraproject.org) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Fri Dec 3 12:19:41 UTC 2010
[    0.000000] Command line: ro root=UUID=89456915-8e90-47a3-a42c-d65632ea4fa8 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr-latin9 rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[    0.000000]  BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7ff80 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] init_memory_mapping: 0000000000000000-000000007ff80000
[    0.000000]  0000000000 - 007fe00000 page 2M
[    0.000000]  007fe00000 - 007ff80000 page 4k
[    0.000000] kernel direct mapping tables up to 7ff80000 @ 16000-1a000
[    0.000000] RAMDISK: 37323000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fbcc0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 000000007ff80000 0003C (v01 A_M_I_ OEMRSDT  01000804 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007ff80200 00084 (v02 A_M_I_ OEMFACP  01000804 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007ff805c0 090B7 (v01  A0753 A0753001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 000000007ff8e000 00040
[    0.000000] ACPI: APIC 000000007ff80390 0006C (v01 A_M_I_ OEMAPIC  01000804 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007ff80400 0003C (v01 A_M_I_ OEMMCFG  01000804 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007ff8e040 00081 (v01 A_M_I_ AMI_OEM  01000804 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007ff89680 00038 (v01 A_M_I_ OEMHPET  01000804 MSFT 00000097)
[    0.000000] ACPI: OSFR 000000007ff896c0 000B0 (v01 A_M_I_ OEMOSFR  01000804 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007ff80000
[    0.000000] Initmem setup node 0 0000000000000000-000000007ff80000
[    0.000000]   NODE_DATA [0000000001e43280 - 0000000001e5727f]
[    0.000000]   bootmap [0000000001e58000 -  0000000001e67fef] pages 10
[    0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 007ff80000]
[    0.000000]   #0 [0001000000 - 0001e42878]    TEXT DATA BSS ==> [0001000000 - 0001e42878]
[    0.000000]   #1 [0037323000 - 0037ff0000]          RAMDISK ==> [0037323000 - 0037ff0000]
[    0.000000]   #2 [0001e43000 - 0001e43278]              BRK ==> [0001e43000 - 0001e43278]
[    0.000000]   #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
[    0.000000]   #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
[    0.000000]   #5 [000009fc00 - 00000f1530]    BIOS reserved ==> [000009fc00 - 00000f1530]
[    0.000000]   #6 [00000f168c - 00000ff780]    BIOS reserved ==> [00000f168c - 00000ff780]
[    0.000000]   #7 [00000f1530 - 00000f168c]     MP-table mpc ==> [00000f1530 - 00000f168c]
[    0.000000]   #8 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
[    0.000000]   #9 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
[    0.000000]   #10 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
[    0.000000]   #11 [0001e43280 - 0001e57280]        NODE_DATA ==> [0001e43280 - 0001e57280]
[    0.000000]   #12 [0001e58000 - 0001e68000]          BOOTMAP ==> [0001e58000 - 0001e68000]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002800000-ffff8800043fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ff80
[    0.000000] On node 0 totalpages: 524047
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 103 pages reserved
[    0.000000]   DMA zone: 3824 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7111 pages used for memmap
[    0.000000]   DMA32 zone: 512953 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90496 r8192 d24192 u524288
[    0.000000] pcpu-alloc: s90496 r8192 d24192 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516777
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ro root=UUID=89456915-8e90-47a3-a42c-d65632ea4fa8 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=fr_FR.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=fr-latin9 rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2038944k/2096640k available (4550k kernel code, 452k absent, 57244k reserved, 7259k data, 944k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU-based detection of stalled CPUs is disabled.
[    0.000000]     Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:712
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 20971520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2000.153 MHz processor.
[    0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.30 BogoMIPS (lpj=2000153)
[    0.001020] pid_max: default: 32768 minimum: 301
[    0.001054] Security Framework initialized
[    0.001066] SELinux:  Initializing.
[    0.001077] SELinux:  Starting in permissive mode
[    0.001470] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003151] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003684] Mount-cache hash table entries: 256
[    0.003900] Initializing cgroup subsys ns
[    0.003908] Initializing cgroup subsys cpuacct
[    0.003914] Initializing cgroup subsys memory
[    0.003935] Initializing cgroup subsys devices
[    0.003938] Initializing cgroup subsys freezer
[    0.003941] Initializing cgroup subsys net_cls
[    0.003945] Initializing cgroup subsys blkio
[    0.004026] CPU: Physical Processor ID: 0
[    0.004028] CPU: Processor Core ID: 0
[    0.004031] mce: CPU supports 6 MCE banks
[    0.004040] CPU0: Thermal monitoring enabled (TM2)
[    0.004046] using mwait in idle threads.
[    0.004048] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.004055] PEBS disabled due to CPU errata.
[    0.004060] ... version:                2
[    0.004062] ... bit width:              40
[    0.004064] ... generic registers:      2
[    0.004066] ... value mask:             000000ffffffffff
[    0.004068] ... max period:             000000007fffffff
[    0.004071] ... fixed-purpose events:   3
[    0.004073] ... event mask:             0000000700000003
[    0.004588] ACPI: Core revision 20100428
[    0.016009] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.016015] ftrace: allocating 23834 entries in 94 pages
[    0.018080] Setting APIC routing to flat
[    0.018400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.029793] CPU0: Intel(R) Pentium(R) Dual  CPU  E2180  @ 2.00GHz stepping 0d
[    0.029999] Booting Node   0, Processors  #1
[    0.100020] Brought up 2 CPUs
[    0.100025] Total of 2 processors activated (8000.34 BogoMIPS).
[    0.100427] sizeof(vma)=184 bytes
[    0.100429] sizeof(page)=56 bytes
[    0.100431] sizeof(inode)=584 bytes
[    0.100433] sizeof(dentry)=192 bytes
[    0.100435] sizeof(ext3inode)=800 bytes
[    0.100436] sizeof(buffer_head)=104 bytes
[    0.100438] sizeof(skbuff)=240 bytes
[    0.100440] sizeof(task_struct)=5944 bytes
[    0.100516] devtmpfs: initialized
[    0.106345] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.106366] Time: 23:24:36  Date: 12/09/10
[    0.106423] NET: Registered protocol family 16
[    0.106565] ACPI: bus type pci registered
[    0.106650] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.106655] PCI: not using MMCONFIG
[    0.106658] PCI: Using configuration type 1 for base access
[    0.108032] bio: create slab <bio-0> at 0
[    0.109844] ACPI: EC: Look up EC in DSDT
[    0.111564] ACPI: Executed 1 blocks of module-level executable AML code
[    0.124511] ACPI: SSDT 000000007ff8e0d0 00214 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.124964] ACPI: Dynamic OEM Table Load:
[    0.124967] ACPI: SSDT (null) 00214 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.125381] ACPI: SSDT 000000007ff8e2f0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.125824] ACPI: Dynamic OEM Table Load:
[    0.125828] ACPI: SSDT (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.126141] ACPI: Interpreter enabled
[    0.126146] ACPI: (supports S0 S1 S3 S4 S5)
[    0.126175] ACPI: Using IOAPIC for interrupt routing
[    0.126235] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.127542] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.162282] ACPI: No dock devices found.
[    0.162287] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.162431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.162715] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.162718] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.162722] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.162725] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.162728] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[    0.162818] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.162821] pci 0000:00:01.0: PME# disabled
[    0.162892] pci 0000:00:1a.0: reg 20: [io  0xc800-0xc81f]
[    0.162960] pci 0000:00:1a.1: reg 20: [io  0xc880-0xc89f]
[    0.163039] pci 0000:00:1a.2: reg 20: [io  0xcc00-0xcc1f]
[    0.163106] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[    0.163163] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.163167] pci 0000:00:1a.7: PME# disabled
[    0.163203] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[    0.163247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.163251] pci 0000:00:1b.0: PME# disabled
[    0.163319] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.163323] pci 0000:00:1c.0: PME# disabled
[    0.163397] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.163402] pci 0000:00:1c.5: PME# disabled
[    0.163454] pci 0000:00:1d.0: reg 20: [io  0xc080-0xc09f]
[    0.163523] pci 0000:00:1d.1: reg 20: [io  0xc400-0xc41f]
[    0.163591] pci 0000:00:1d.2: reg 20: [io  0xc480-0xc49f]
[    0.163660] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[    0.163716] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.163721] pci 0000:00:1d.7: PME# disabled
[    0.163843] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.163847] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.163852] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.163903] pci 0000:00:1f.2: reg 10: [io  0xb000-0xb007]
[    0.163910] pci 0000:00:1f.2: reg 14: [io  0xac00-0xac03]
[    0.163916] pci 0000:00:1f.2: reg 18: [io  0xa880-0xa887]
[    0.163922] pci 0000:00:1f.2: reg 1c: [io  0xa800-0xa803]
[    0.163928] pci 0000:00:1f.2: reg 20: [io  0xa480-0xa48f]
[    0.163934] pci 0000:00:1f.2: reg 24: [io  0xa400-0xa40f]
[    0.163983] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[    0.164004] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.164045] pci 0000:00:1f.5: reg 10: [io  0xc000-0xc007]
[    0.164051] pci 0000:00:1f.5: reg 14: [io  0xbc00-0xbc03]
[    0.164057] pci 0000:00:1f.5: reg 18: [io  0xb880-0xb887]
[    0.164063] pci 0000:00:1f.5: reg 1c: [io  0xb800-0xb803]
[    0.164069] pci 0000:00:1f.5: reg 20: [io  0xb480-0xb48f]
[    0.164076] pci 0000:00:1f.5: reg 24: [io  0xb400-0xb40f]
[    0.164156] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.164166] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164176] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[    0.164182] pci 0000:01:00.0: reg 24: [io  0xdc00-0xdc7f]
[    0.164188] pci 0000:01:00.0: reg 30: [mem 0xfe980000-0xfe9fffff pref]
[    0.164238] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.164242] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.164246] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe9fffff]
[    0.164251] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.164293] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.164298] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.164302] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.164309] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.164386] pci 0000:02:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
[    0.164419] pci 0000:02:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[    0.164454] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.164459] pci 0000:02:00.0: PME# disabled
[    0.164478] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.164483] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.164488] pci 0000:00:1c.5:   bridge window [io  0xf000-0x0000] (disabled)
[    0.164492] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.164499] pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.164553] pci 0000:04:03.0: reg 10: [mem 0xfebff800-0xfebfffff]
[    0.164560] pci 0000:04:03.0: reg 14: [io  0xec00-0xec7f]
[    0.164606] pci 0000:04:03.0: supports D2
[    0.164608] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[    0.164613] pci 0000:04:03.0: PME# disabled
[    0.164657] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.164661] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.164666] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.164672] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.164675] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.164679] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[    0.164700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.164892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.164963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.165135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.165243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.185326] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.185457] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.185586] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.185715] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.185843] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.185972] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.186107] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.186235] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.186292] HEST: Table is not found!
[    0.186394] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.186399] vgaarb: loaded
[    0.186525] SCSI subsystem initialized
[    0.186553] libata version 3.00 loaded.
[    0.186553] usbcore: registered new interface driver usbfs
[    0.186553] usbcore: registered new interface driver hub
[    0.186553] usbcore: registered new device driver usb
[    0.186553] PCI: Using ACPI for IRQ routing
[    0.186553] PCI: pci_cache_line_size set to 64 bytes
[    0.186553] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.186553] reserve RAM buffer: 000000007ff80000 - 000000007fffffff 
[    0.187108] NetLabel: Initializing
[    0.187110] NetLabel:  domain hash size = 128
[    0.187112] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.187128] NetLabel:  unlabeled traffic allowed by default
[    0.187211] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.187216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.187222] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.190034] Switching to clocksource tsc
[    0.204701] pnp: PnP ACPI init
[    0.204734] ACPI: bus type pnp registered
[    0.204957] pnp 00:00: [bus 00-ff]
[    0.204960] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.204963] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.204965] pnp 00:00: [io  0x0d00-0xffff window]
[    0.204968] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.204971] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.204973] pnp 00:00: [mem 0x80000000-0xffffffff window]
[    0.205059] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.205073] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.205135] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.205199] pnp 00:02: [dma 4]
[    0.205202] pnp 00:02: [io  0x0000-0x000f]
[    0.205204] pnp 00:02: [io  0x0081-0x0083]
[    0.205206] pnp 00:02: [io  0x0087]
[    0.205208] pnp 00:02: [io  0x0089-0x008b]
[    0.205210] pnp 00:02: [io  0x008f]
[    0.205212] pnp 00:02: [io  0x00c0-0x00df]
[    0.205246] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.205263] pnp 00:03: [io  0x0070-0x0071]
[    0.205277] pnp 00:03: [irq 8]
[    0.205305] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.205319] pnp 00:04: [io  0x0061]
[    0.205347] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.205360] pnp 00:05: [io  0x00f0-0x00ff]
[    0.205366] pnp 00:05: [irq 13]
[    0.205399] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.205752] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.205756] pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
[    0.205758] pnp 00:06: [io  0x0290-0x0297]
[    0.205819] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206070] pnp 00:07: [io  0x0010-0x001f]
[    0.206072] pnp 00:07: [io  0x0022-0x003f]
[    0.206074] pnp 00:07: [io  0x0044-0x004d]
[    0.206076] pnp 00:07: [io  0x0050-0x005f]
[    0.206079] pnp 00:07: [io  0x0062-0x0063]
[    0.206081] pnp 00:07: [io  0x0065-0x006f]
[    0.206083] pnp 00:07: [io  0x0072-0x007f]
[    0.206085] pnp 00:07: [io  0x0080]
[    0.206087] pnp 00:07: [io  0x0084-0x0086]
[    0.206089] pnp 00:07: [io  0x0088]
[    0.206091] pnp 00:07: [io  0x008c-0x008e]
[    0.206093] pnp 00:07: [io  0x0090-0x009f]
[    0.206096] pnp 00:07: [io  0x00a2-0x00bf]
[    0.206098] pnp 00:07: [io  0x00e0-0x00ef]
[    0.206100] pnp 00:07: [io  0x04d0-0x04d1]
[    0.206102] pnp 00:07: [io  0x0800-0x087f]
[    0.206104] pnp 00:07: [io  0x0400-0x03ff disabled]
[    0.206107] pnp 00:07: [io  0x0480-0x04bf]
[    0.206113] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[    0.206115] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[    0.206118] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[    0.206120] pnp 00:07: [mem 0xffa00000-0xffafffff]
[    0.206123] pnp 00:07: [mem 0xffb00000-0xffbfffff]
[    0.206125] pnp 00:07: [mem 0xffe00000-0xffefffff]
[    0.206127] pnp 00:07: [mem 0xfff00000-0xfffffffe]
[    0.206213] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206388] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    0.206425] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.207023] pnp 00:09: [irq 4]
[    0.207026] pnp 00:09: [dma 0 disabled]
[    0.207029] pnp 00:09: [io  0x03f8-0x03ff]
[    0.207124] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.207239] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.207242] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.207294] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207355] pnp 00:0b: [io  0x0060]
[    0.207357] pnp 00:0b: [io  0x0064]
[    0.207363] pnp 00:0b: [irq 1]
[    0.207401] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.207483] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.207552] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207909] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.207912] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    0.207914] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.207917] pnp 00:0d: [mem 0x00100000-0x7fffffff]
[    0.207919] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.207990] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.208333] pnp: PnP ACPI: found 14 devices
[    0.208335] ACPI: ACPI bus type pnp unregistered
[    0.208350] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.208359] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.208366] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.208369] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.208372] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.208376] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.208379] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.208383] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.208386] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[    0.208390] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.208393] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[    0.208396] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.208404] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.208407] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.208413] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.208420] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.208423] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[    0.208427] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.208430] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.215080] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[    0.215085] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.215088] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.215092] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.215095] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.215098] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.215102] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfe9fffff]
[    0.215107] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.215112] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.215115] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.215120] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
[    0.215125] pci 0000:00:1c.0:   bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.215132] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.215135] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.215141] pci 0000:00:1c.5:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.215145] pci 0000:00:1c.5:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.215152] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.215156] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.215161] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.215165] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.215181]   alloc irq_desc for 16 on node -1
[    0.215183]   alloc kstat_irqs on node -1
[    0.215192] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.215197] pci 0000:00:01.0: setting latency timer to 64
[    0.215205] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.215209]   alloc irq_desc for 17 on node -1
[    0.215211]   alloc kstat_irqs on node -1
[    0.215216] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.215220] pci 0000:00:1c.0: setting latency timer to 64
[    0.215228] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[    0.215232] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.215237] pci 0000:00:1c.5: setting latency timer to 64
[    0.215244] pci 0000:00:1e.0: setting latency timer to 64
[    0.215248] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.215251] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[    0.215254] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.215256] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
[    0.215259] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.215262] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.215265] pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
[    0.215268] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[    0.215270] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.215273] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.215276] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.215279] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.215281] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.215284] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.215286] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffffffffffff]
[    0.215323] NET: Registered protocol family 2
[    0.215450] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.216319] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.218622] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.219176] TCP: Hash tables configured (established 262144 bind 65536)
[    0.219180] TCP reno registered
[    0.219207] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.219232] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.219399] NET: Registered protocol family 1
[    0.219585] pci 0000:01:00.0: Boot video device
[    0.219596] PCI: CLS 32 bytes, default 64
[    0.219680] Trying to unpack rootfs image as initramfs...
[    0.565572] Freeing initrd memory: 13108k freed
[    0.572553] audit: initializing netlink socket (disabled)
[    0.572571] type=2000 audit(1291937076.570:1): initialized
[    0.589058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.590905] VFS: Disk quotas dquot_6.5.2
[    0.590965] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.591532] msgmni has been set to 4007
[    0.591603] SELinux:  Registering netfilter hooks
[    0.591976] alg: No test for stdrng (krng)
[    0.592044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.592049] io scheduler noop registered
[    0.592052] io scheduler deadline registered
[    0.592098] io scheduler cfq registered (default)
[    0.592301] pcieport 0000:00:01.0: setting latency timer to 64
[    0.592329]   alloc irq_desc for 40 on node -1
[    0.592332]   alloc kstat_irqs on node -1
[    0.592343] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.592417] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.592449]   alloc irq_desc for 41 on node -1
[    0.592451]   alloc kstat_irqs on node -1
[    0.592459] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.592552] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.592583]   alloc irq_desc for 42 on node -1
[    0.592585]   alloc kstat_irqs on node -1
[    0.592593] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[    0.592706] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.592799] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.592801] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.593151] pci-stub: invalid id string ""
[    0.593242] intel_idle: MWAIT substates: 0x220
[    0.593244] intel_idle: does not run on family 6 model 15
[    0.593374] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.593379] ACPI: Power Button [PWRB]
[    0.593434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.593438] ACPI: Power Button [PWRF]
[    0.593739] ACPI: acpi_idle registered with cpuidle
[    0.596993] ERST: Table is not found!
[    0.597331] Non-volatile memory driver v1.3
[    0.597335] Linux agpgart interface v0.103
[    0.597549] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.843503] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.843906] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.845367] brd: module loaded
[    0.846065] loop: module loaded
[    0.846196] ata_piix 0000:00:1f.2: version 2.13
[    0.846216]   alloc irq_desc for 22 on node -1
[    0.846219]   alloc kstat_irqs on node -1
[    0.846229] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.846234] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.846282] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.846374] scsi0 : ata_piix
[    0.846484] scsi1 : ata_piix
[    0.848481] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.848486] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.848543] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.848548] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.848594] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.848641] scsi2 : ata_piix
[    0.848716] scsi3 : ata_piix
[    0.850529] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
[    0.850534] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
[    0.850636] Fixed MDIO Bus: probed
[    0.850719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.850742]   alloc irq_desc for 18 on node -1
[    0.850744]   alloc kstat_irqs on node -1
[    0.850752] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.850775] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.850779] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.850851] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.850879] ehci_hcd 0000:00:1a.7: debug port 1
[    0.854763] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.854783] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.864446] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.864494] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.864499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.864504] usb usb1: Product: EHCI Host Controller
[    0.864507] usb usb1: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 ehci_hcd
[    0.864511] usb usb1: SerialNumber: 0000:00:1a.7
[    0.864669] hub 1-0:1.0: USB hub found
[    0.864675] hub 1-0:1.0: 6 ports detected
[    0.864767]   alloc irq_desc for 23 on node -1
[    0.864769]   alloc kstat_irqs on node -1
[    0.864775] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.864788] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.864792] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.864846] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.864872] ehci_hcd 0000:00:1d.7: debug port 1
[    0.868769] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.868795] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.878507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.878539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.878544] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.878548] usb usb2: Product: EHCI Host Controller
[    0.878552] usb usb2: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 ehci_hcd
[    0.878556] usb usb2: SerialNumber: 0000:00:1d.7
[    0.878710] hub 2-0:1.0: USB hub found
[    0.878717] hub 2-0:1.0: 6 ports detected
[    0.878802] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.878822] uhci_hcd: USB Universal Host Controller Interface driver
[    0.878856] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.878864] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.878868] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.878916] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.878952] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[    0.878993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.878996] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.878998] usb usb3: Product: UHCI Host Controller
[    0.879000] usb usb3: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.879003] usb usb3: SerialNumber: 0000:00:1a.0
[    0.879107] hub 3-0:1.0: USB hub found
[    0.879113] hub 3-0:1.0: 2 ports detected
[    0.879197]   alloc irq_desc for 21 on node -1
[    0.879199]   alloc kstat_irqs on node -1
[    0.879205] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.879212] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.879216] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.879260] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.879297] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[    0.879334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.879337] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.879340] usb usb4: Product: UHCI Host Controller
[    0.879342] usb usb4: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.879344] usb usb4: SerialNumber: 0000:00:1a.1
[    0.879449] hub 4-0:1.0: USB hub found
[    0.879454] hub 4-0:1.0: 2 ports detected
[    0.879541] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.879548] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.879551] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.879607] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.879633] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[    0.879670] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.879673] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.879676] usb usb5: Product: UHCI Host Controller
[    0.879678] usb usb5: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.879680] usb usb5: SerialNumber: 0000:00:1a.2
[    0.879783] hub 5-0:1.0: USB hub found
[    0.879788] hub 5-0:1.0: 2 ports detected
[    0.879870] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.879877] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.879881] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.879931] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.879957] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[    0.879996] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.879999] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880002] usb usb6: Product: UHCI Host Controller
[    0.880004] usb usb6: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.880006] usb usb6: SerialNumber: 0000:00:1d.0
[    0.880110] hub 6-0:1.0: USB hub found
[    0.880115] hub 6-0:1.0: 2 ports detected
[    0.880188]   alloc irq_desc for 19 on node -1
[    0.880191]   alloc kstat_irqs on node -1
[    0.880197] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.880204] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.880207] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.880262] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.880299] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[    0.880337] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.880340] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880342] usb usb7: Product: UHCI Host Controller
[    0.880345] usb usb7: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.880347] usb usb7: SerialNumber: 0000:00:1d.1
[    0.880453] hub 7-0:1.0: USB hub found
[    0.880458] hub 7-0:1.0: 2 ports detected
[    0.880544] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.880551] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.880554] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.880603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.880629] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[    0.880668] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.880671] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.880674] usb usb8: Product: UHCI Host Controller
[    0.880676] usb usb8: Manufacturer: Linux 2.6.35.9-64.fc14.x86_64 uhci_hcd
[    0.880678] usb usb8: SerialNumber: 0000:00:1d.2
[    0.880784] hub 8-0:1.0: USB hub found
[    0.880789] hub 8-0:1.0: 2 ports detected
[    0.880939] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.880941] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.881438] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.881513] mice: PS/2 mouse device common for all mice
[    0.881688] rtc_cmos 00:03: RTC can wake from S4
[    0.881746] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.881773] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.881861] device-mapper: uevent: version 1.0.3
[    0.882007] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@redhat.com
[    0.882106] cpuidle: using governor ladder
[    0.882108] cpuidle: using governor menu
[    0.882355] usbcore: registered new interface driver hiddev
[    0.882373] usbcore: registered new interface driver usbhid
[    0.882375] usbhid: USB HID core driver
[    0.882410] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.882568] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    0.882571] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    0.882574] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    0.882653] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.882669] TCP cubic registered
[    0.882671] Initializing XFRM netlink socket
[    0.882684] NET: Registered protocol family 17
[    0.882833] PM: Resume from disk failed.
[    0.882850] registered taskstats version 1
[    0.883148]   Magic number: 6:528:453
[    0.883256] rtc_cmos 00:03: setting system clock to 2010-12-09 23:24:37 UTC (1291937077)
[    0.883300] Initalizing network drop monitor service
[    1.163835] ata3: SATA link down (SStatus 0 SControl 300)
[    1.266030] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    1.302089] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.302211] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.304056] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.305284] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
[    1.305309] ata1.00: applying bridge limits
[    1.306894] ata2.00: ATA-7: Maxtor 6L200M0, BANC1G10, max UDMA/133
[    1.306900] ata2.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
[    1.311236] ata1.00: configured for UDMA/33
[    1.312174] ata2.00: configured for UDMA/133
[    1.313367] scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
[    1.320185] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.320191] Uniform CD-ROM driver Revision: 3.20
[    1.320377] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.320456] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.320627] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
[    1.320761] sd 1:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[    1.320791] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.320832] sd 1:0:0:0: [sda] Write Protect is off
[    1.320835] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.320876] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.321079]  sda:
[    1.324350] ata4.00: ATA-7: Hitachi HDS721680PLA380, P21OABEA, max UDMA/133
[    1.324357] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.330369] ata4.00: configured for UDMA/133
[    1.330509] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72168 P21O PQ: 0 ANSI: 5
[    1.330654] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.330689] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.330724] sd 3:0:0:0: [sdb] Write Protect is off
[    1.330727] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.330762] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.330966]  sdb: sda1 sda2 sda3
[    1.347648]  sdb1
[    1.347975] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.352046] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.352077] Freeing unused kernel memory: 944k freed
[    1.352389] Write protecting the kernel read-only data: 10240k
[    1.352733] Freeing unused kernel memory: 1576k freed
[    1.353697] Freeing unused kernel memory: 1836k freed
[    1.372081] dracut: dracut-006-5.fc14
[    1.378753] dracut: rd_NO_LUKS: removing cryptoluks activation
[    1.380034] dracut: rd_NO_LVM: removing LVM activation
[    1.381058] usb 1-2: New USB device found, idVendor=059f, idProduct=0641
[    1.381063] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.381067] usb 1-2: Product: LaCie HardDrive USB
[    1.381070] usb 1-2: Manufacturer: LaCie
[    1.381072] usb 1-2: SerialNumber: 10000E000B3A5C41
[    1.388265] udev[81]: starting version 161
[    1.470919] dracut: Starting plymouth daemon
[    1.483168] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    1.493689] dracut: rd_NO_DM: removing DM RAID activation
[    1.496988] dracut: rd_NO_MD: removing MD RAID activation
[    1.597436] usb 1-3: New USB device found, idVendor=050d, idProduct=0233
[    1.597442] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.597738] hub 1-3:1.0: USB hub found
[    1.597802] hub 1-3:1.0: 4 ports detected
[    1.640792] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.708569] Initializing USB Mass Storage driver...
[    1.708718] scsi4 : usb-storage 1-2:1.0
[    1.708944] usbcore: registered new interface driver usb-storage
[    1.708946] USB Mass Storage support registered.
[    1.719027] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[    1.855056] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.029953] usb 3-1: New USB device found, idVendor=046d, idProduct=c318
[    2.029960] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.029967] usb 3-1: Product: Logitech Illuminated Keyboard
[    2.029971] usb 3-1: Manufacturer: Logitech
[    2.034242] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.038297] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input2
[    2.038423] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1/input0
[    2.042121] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input3
[    2.042310] generic-usb 0003:046D:C318.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1/input1
[    2.124533] dracut: Mounted root filesystem /dev/sda1
[    2.218235] firewire_core: created device fw0: GUID 001e8c000125334d, S400
[    2.240405] dracut: Loading SELinux policy
[    2.248055] usb 4-2: new low speed USB device using uhci_hcd and address 2
[    2.409281] usb 4-2: New USB device found, idVendor=046d, idProduct=c50e
[    2.409289] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.409295] usb 4-2: Product: USB RECEIVER
[    2.409299] usb 4-2: Manufacturer: Logitech
[    2.430653] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[    2.430805] generic-usb 0003:046D:C50E.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2/input0
[    2.582355] SELinux:  Disabled at runtime.
[    2.582393] SELinux:  Unregistering netfilter hooks
[    2.582471] type=1404 audit(1291937079.198:2): selinux=0 auid=4294967295 ses=4294967295
[    2.709918] scsi 4:0:0:0: Direct-Access     SEAGATE  ST3160021A       8.01 PQ: 0 ANSI: 2
[    2.711516] sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.711582] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.712283] sd 4:0:0:0: [sdc] Write Protect is off
[    2.712289] sd 4:0:0:0: [sdc] Mode Sense: 53 00 00 08
[    2.712294] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.713768] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.713776]  sdc: sdc1
[    2.720015] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[    2.720020] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.722892] dracut: /sbin/load_policy: Can't load policy file /etc/selinux/targeted/policy/policy.15: Aucun fichier ou dossier de ce type
[    2.859303] dracut: Switching root
[    4.246780] readahead-collector: starting
[    4.804192] udev[402]: starting version 161
[    5.469420] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa1
[    5.469438] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa1
[    5.469509] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.814784] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.814796] atl1 0000:02:00.0: setting latency timer to 64
[    5.815057] atl1 0000:02:00.0: version 2.1.3
[    5.961992] microcode: CPU0 updated to revision 0xa3, date = 2007-08-13
[    5.962515] microcode: CPU1 updated to revision 0xa3, date = 2007-08-13
[    6.013757] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    6.013765] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [??? 0x00000400-0x0000040f flags 0xffff88007d0c6018]
[    6.013768] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.037608] iTCO_vendor_support: vendor-support=0
[    6.178486] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    6.178610] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    6.178949] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.164270] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.164350]   alloc irq_desc for 43 on node -1
[    7.164354]   alloc kstat_irqs on node -1
[    7.164370] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    7.164401] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.388807] ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x1d sku_cfg=0x4015e601
[    7.388812] ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x1
[    7.388815] ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x1
[    7.388819] ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000005
[    7.388822] ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x000000e6
[    7.388825] ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0
[    7.388828] ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0
[    7.388831] ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0
[    7.388834] ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1
[    7.388905] hda_codec: ALC883: BIOS auto-probing.
[    7.388911] ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
[    7.388915] ALSA sound/pci/hda/hda_codec.c:4439:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.388919] ALSA sound/pci/hda/hda_codec.c:4443:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.388923] ALSA sound/pci/hda/hda_codec.c:4444:    mono: mono_out=0x0
[    7.388926] ALSA sound/pci/hda/hda_codec.c:4447:    dig-out=0x1e/0x0
[    7.388929] ALSA sound/pci/hda/hda_codec.c:4455:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
[    7.390191] ALSA sound/pci/hda/patch_realtek.c:1358: realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[    7.390195] ALSA sound/pci/hda/patch_realtek.c:1374: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883
[    7.857616] nvidia: module license 'NVIDIA' taints kernel.
[    7.857620] Disabling lock debugging due to kernel taint
[    8.883473] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.883484] nvidia 0000:01:00.0: setting latency timer to 64
[    8.883491] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.883667] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.21  Thu Nov  4 21:16:27 PDT 2010
[   10.126892] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.493552] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   11.084329] Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k 
[   11.521580] readahead-disable-service: delaying service auditd
[   11.774385] NET: Registered protocol family 10
[   11.775016] lo: Disabled Privacy Extensions
[   11.802203] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.290084]   alloc irq_desc for 44 on node -1
[   12.290088]   alloc kstat_irqs on node -1
[   12.290106] atl1 0000:02:00.0: irq 44 for MSI/MSI-X
[   12.290215] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   16.096220] RPC: Registered udp transport module.
[   16.096224] RPC: Registered tcp transport module.
[   16.096227] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   22.306012] eth0: no IPv6 routers present
[   31.927378] type=1305 audit(1291933508.238:20486): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
[   31.927384] type=1305 audit(1291933508.238:20487): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[   32.578258] readahead-collector: starting delayed service auditd
[   33.424796] readahead-collector: sorting
[   37.641789] readahead-collector: finished
[   43.660819] fuse init (API version 7.14)
des lignes attirent mon attention:
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.162287] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    6.013765] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [??? 0x00000400-0x0000040f flags 0xffff88007d0c6018]
De plus, j'ai des erreurs sur mon disque que je vois via l'utilitaire de disque...
smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Maxtor DiamondMax 10 family (ATA/133 and SATA/150)
Device Model:     Maxtor 6L200M0
Serial Number:    L40XDB3H
Firmware Version: BANC1G10
User Capacity:    203 928 109 056 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 0
Local Time is:    Fri Dec 10 00:41:28 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 244)    Self-test routine in progress...
                    40% of test remaining.
Total time to complete Offline 
data collection:          (1562) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  81) minutes.
SCT capabilities:            (0x0021)    SCT Status supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   206   196   063    Pre-fail  Always       -       14317
  4 Start_Stop_Count        0x0032   252   252   000    Old_age   Always       -       2723
  5 Reallocated_Sector_Ct   0x0033   253   253   063    Pre-fail  Always       -       1
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   247   239   187    Pre-fail  Always       -       62642
  9 Power_On_Minutes        0x0032   213   213   000    Old_age   Always       -       969h+48m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   246   246   000    Old_age   Always       -       3012
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   035   253   000    Old_age   Always       -       36
195 Hardware_ECC_Recovered  0x000a   253   252   000    Old_age   Always       -       23895
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       3
198 Offline_Uncorrectable   0x0008   253   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       5
202 Data_Address_Mark_Errs  0x000a   253   252   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   252   180    Pre-fail  Always       -       7
204 Soft_ECC_Correction     0x000a   253   252   000    Old_age   Always       -       0
205 Thermal_Asperity_Rate   0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   241   241   000    Old_age   Offline      -       151
210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
212 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 10788 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 10788 occurred at disk power-on lifetime: 12950 hours (539 days + 14 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 00 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      09:58:14.684  IDENTIFY DEVICE
  c8 00 08 20 fb 0d ee 00      09:58:13.167  READ DMA
  27 00 00 00 00 00 e0 00      09:58:13.166  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      09:58:13.163  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      09:58:13.160  SET FEATURES [Set transfer mode]

Error 10787 occurred at disk power-on lifetime: 12950 hours (539 days + 14 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 00 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      09:58:13.068  IDENTIFY DEVICE
  c8 00 08 20 fb 0d ee 00      09:58:10.224  READ DMA
  27 00 00 00 00 00 e0 00      09:58:10.223  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      09:58:10.220  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      09:58:10.217  SET FEATURES [Set transfer mode]

Error 10786 occurred at disk power-on lifetime: 12950 hours (539 days + 14 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 00 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      09:58:10.143  IDENTIFY DEVICE
  c8 00 08 20 fb 0d ee 00      09:58:07.307  READ DMA
  27 00 00 00 00 00 e0 00      09:58:07.306  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      09:58:07.303  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      09:58:07.300  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Aborted by host               40%     13817         -
# 2  Extended offline    Aborted by host               70%     13816         -
# 3  Short offline       Completed: read failure       60%     13568         235797283
# 4  Short offline       Completed: read failure       60%     12811         235797283
# 5  Extended offline    Aborted by host               40%     12811         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
C'est bien possible que des erreurs I/O provoquent un ralentissement du système.
Oui, et puis ça fait un bout de temps qu'il tourne celui-là..

539 days + 14 hours
539 jours sous F14 ?? Alors va falloir que tu m'expliques...
pingou wrote:539 jours sous F14 ?? Alors va falloir que tu m'expliques...
Pas que sous F14, c'est le temps de fonctionnement total du disque.
pingou wrote:539 jours sous F14 ?? Alors va falloir que tu m'expliques...
c'est le temps total:)
Sinon, vous voyez des erreurs dans mon dmesg ?