Bonjour,
je possède une carte son externe m-audio firewire audiophile et celà fait une semaine que je tente de l'installer sous fedora 13 (x64) sans résultat.
J'ai suivi le post FireWire Audiophile or la commande modprobe raw1394 me renvoie: 
FATAL: Module raw1394 not found.
et la carte n'est pas visible dans le ffado-mixer.
est-ce que quelqu'un aurai une idée voir même la solution ?
merci d'avance.
Pas mieux, car je l'ai fais fonctionner chez un client cette carte...
ben ouai libraw1394 est installer 
yum install libraw1394
Modules complémentaires chargés : refresh-packagekit
Configuration du processus d'installation
Le paquet libraw1394-2.0.5-2.fc13.x86_64 est déjà installé dans sa dernière version
j'ai quand essayer ffado-bridgeco-downloader 0x000d6cXXXX firmware /home/Corentin/Téléchargement/fwap.bcd -m 0x001807198000LL
mais 
ffado-bridgeco-downloader 0x000d6cXXXX firmware /home/Corentin/Téléchargement/fwap.bcd -m 0x001807198000LL
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
12023813529: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
12023813619: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
Could not find device with matching GUID
no message buffer overruns
j'arrive a récupérer les infos de ma carte ffado-bridgeco-downloader -m 0x001807198000LL 0x000d6c0310ebbf68 display 
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
02033189543: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
02033189591: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
02033439991:  (configrom.cpp)[ 583] printConfigRom: Config ROM
02033440069:  (configrom.cpp)[ 584] printConfigRom:     Current Node Id:    0
02033440115:  (configrom.cpp)[ 585] printConfigRom:     GUID:            0x000D6C0310EBBF68
02033440148:  (configrom.cpp)[ 586] printConfigRom:     Vendor Name:        M-AUDIO
02033440186:  (configrom.cpp)[ 587] printConfigRom:     Model Name:        FW Audiophile Bootloader 
02033440216:  (configrom.cpp)[ 588] printConfigRom:     Node Vendor ID:        0x000d6c
02033440252:  (configrom.cpp)[ 589] printConfigRom:     Model Id:        0x00010060
02033440281:  (configrom.cpp)[ 590] printConfigRom:     Unit Specifier ID:    0x00a02d
02033440315:  (configrom.cpp)[ 591] printConfigRom:     Unit version:        0x00014001
02033440344:  (configrom.cpp)[ 592] printConfigRom:     ISO resource manager:    0
02033440379:  (configrom.cpp)[ 593] printConfigRom:     Cycle master capable:    0
02033440406:  (configrom.cpp)[ 594] printConfigRom:     Bus manager capable:    0
02033440440:  (configrom.cpp)[ 595] printConfigRom:     Cycle clock accuracy:    100
02033440467:  (configrom.cpp)[ 596] printConfigRom:     Max rec:        8 (max asy payload: 512 bytes)
Info Registers
    Manufactors Id:        bridgeCo
    Protocol Version:    0x00000001
    Bootloader Version:    0x00002803
    GUID:            0x000d6c0300ebbf68
    Hardware Model ID:    0x0000000d
    Hardware Revision:    0x00000001
    Software Date:        04.05.2007, 10:22:12
    Software Id:        0x00010060
    Software Version:    0x00ffffff
    Base Address:        0x20080000
    Max. Image Len:        0x00180000
    Bootloader Date:    06.10.2003, 10:00:41
    Debugger Id:        0x00000000
    Debugger Version:    0x00000000
mais quand je passe au firmware ffado-bridgeco-downloader -m 0x001807198000LL 0x000d6c0310ebbf68 firmware /home/Corentin/MAO/firmware/fwap.bcd 
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
02194974174: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
02194974266: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
02195216699:  (configrom.cpp)[ 583] printConfigRom: Config ROM
02195216725:  (configrom.cpp)[ 584] printConfigRom:     Current Node Id:    0
02195216746:  (configrom.cpp)[ 585] printConfigRom:     GUID:            0x000D6C0310EBBF68
02195216753:  (configrom.cpp)[ 586] printConfigRom:     Vendor Name:        M-AUDIO
02195216763:  (configrom.cpp)[ 587] printConfigRom:     Model Name:        FW Audiophile Bootloader 
02195216769:  (configrom.cpp)[ 588] printConfigRom:     Node Vendor ID:        0x000d6c
02195216779:  (configrom.cpp)[ 589] printConfigRom:     Model Id:        0x00010060
02195216784:  (configrom.cpp)[ 590] printConfigRom:     Unit Specifier ID:    0x00a02d
02195216801:  (configrom.cpp)[ 591] printConfigRom:     Unit version:        0x00014001
02195216806:  (configrom.cpp)[ 592] printConfigRom:     ISO resource manager:    0
02195216816:  (configrom.cpp)[ 593] printConfigRom:     Cycle master capable:    0
02195216820:  (configrom.cpp)[ 594] printConfigRom:     Bus manager capable:    0
02195216829:  (configrom.cpp)[ 595] printConfigRom:     Cycle clock accuracy:    100
02195216834:  (configrom.cpp)[ 596] printConfigRom:     Max rec:        8 (max asy payload: 512 bytes)
Info Registers
    Manufactors Id:        bridgeCo
    Protocol Version:    0x00000001
    Bootloader Version:    0x00002803
    GUID:            0x000d6c0300ebbf68
    Hardware Model ID:    0x0000000d
    Hardware Revision:    0x00000001
    Software Date:        04.05.2007, 10:22:12
    Software Id:        0x00010060
    Software Version:    0x00ffffff
    Base Address:        0x20080000
    Max. Image Len:        0x00180000
    Bootloader Date:    06.10.2003, 10:00:41
    Debugger Id:        0x00000000
    Debugger Version:    0x00000000
parse BCD file
02195293567: Error (bebob_dl_bcd.cpp)[ 358] checkHeaderCRC: checkHeaderCRC: CRC check failed, 0xe3c4bb1e expected, 0x42f50400 calculated
02195293589: Error (bebob_dl_bcd.cpp)[ 180] parse: parse: Header CRC check failed
02195293603: Error (bebob_dl_mgr.cpp)[ 249] downloadFirmware: downloadFirmware: BCD parsing failed
Failed to download firmware
même quand j'essaye d'utiliser le GUID ffado-bridgeco-downloader -m 0x001807198000LL 0x000d6c0310ebbf68 setguid /home/Corentin/MAO/firmware/fwap.bcd
les diodes ce fixe quelques secondes puis recommence à clignoter 
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
02312454421: Warning (ieee1394service.cpp)[ 375] initialize: Could not set SPLIT_TIMEOUT to min requested (1000000)
02312454475: Warning (ieee1394service.cpp)[ 379] initialize: Set SPLIT_TIMEOUT to min requested (1000000) did not succeed
02312704798:  (configrom.cpp)[ 583] printConfigRom: Config ROM
02312704825:  (configrom.cpp)[ 584] printConfigRom:     Current Node Id:    0
02312704846:  (configrom.cpp)[ 585] printConfigRom:     GUID:            0x000D6C0310EBBF68
02312704853:  (configrom.cpp)[ 586] printConfigRom:     Vendor Name:        M-AUDIO
02312704863:  (configrom.cpp)[ 587] printConfigRom:     Model Name:        FW Audiophile Bootloader 
02312704869:  (configrom.cpp)[ 588] printConfigRom:     Node Vendor ID:        0x000d6c
02312704879:  (configrom.cpp)[ 589] printConfigRom:     Model Id:        0x00010060
02312704884:  (configrom.cpp)[ 590] printConfigRom:     Unit Specifier ID:    0x00a02d
02312704894:  (configrom.cpp)[ 591] printConfigRom:     Unit version:        0x00014001
02312704898:  (configrom.cpp)[ 592] printConfigRom:     ISO resource manager:    0
02312704908:  (configrom.cpp)[ 593] printConfigRom:     Cycle master capable:    0
02312704913:  (configrom.cpp)[ 594] printConfigRom:     Bus manager capable:    0
02312704922:  (configrom.cpp)[ 595] printConfigRom:     Cycle clock accuracy:    100
02312704927:  (configrom.cpp)[ 596] printConfigRom:     Max rec:        8 (max asy payload: 512 bytes)
Info Registers
    Manufactors Id:        bridgeCo
    Protocol Version:    0x00000001
    Bootloader Version:    0x00002803
    GUID:            0x000d6c0300ebbf68
    Hardware Model ID:    0x0000000d
    Hardware Revision:    0x00000001
    Software Date:        04.05.2007, 10:22:12
    Software Id:        0x00010060
    Software Version:    0x00ffffff
    Base Address:        0x20080000
    Max. Image Len:        0x00180000
    Bootloader Date:    06.10.2003, 10:00:41
    Debugger Id:        0x00000000
    Debugger Version:    0x00000000
..02314082921: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02314090176: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02314090206: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02315097489: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02315104290: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02315104346: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02316111883: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02316118712: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02316118783: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02317126231: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02317132808: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02317132865: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02318140477: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02318148341: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02318148413: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02319155964: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02319163271: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02319163300: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02320171032: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02320177713: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02320177750: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02321185554: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02321192294: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02321192323: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02322200074: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02322206597: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02322206637: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02323214242: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02323221327: Warning (configrom.cpp)[ 506] updatedNodeId: Failed to get/parse CSR
02323221345: Error (bebob_dl_mgr.cpp)[ 129] cacheInfoRegisters: cacheInfoRegisters: did not find device anymore
.02324221651: Error (bebob_dl_mgr.cpp)[ 672] startBootloaderCmd: startBootloaderCmd: Could not read info registers
02324221679: Error (bebob_dl_mgr.cpp)[ 547] programGUID: programGUID: Could not start bootloader
Failed to set GUID
T'as essayé avec les lib en 32bits par hazard ?
je viens de réessayer après avoir installer les lib en 32bits mais toujours les mêmes messages d'erreurs.
2 mois plus tard
Re,
après avoir suivit le tuto Linux MAO : CCRMA, quand je lance ffado-bridgeco-downloader -m 0x001807198000LL 0x0000000010000000 setguid /home/Corentin/MAO/firmware/linux/fwap.bcd 
-----------------------------------------------
BridgeCo BeBoB platform firmware downloader
Part of the FFADO project -- www.ffado.org
Version: 2.999.0-
(C) 2008, Daniel Wagner, Pieter Palmers
This program comes with ABSOLUTELY NO WARRANTY.
-----------------------------------------------

YOU HAVE SPECIFIED THE CORRECT MAGIC NUMBER.
HENCE YOU ACCEPT THE RISKS INVOLVED.
00565282631:  (configrom.cpp)[ 583] printConfigRom: Config ROM
00565282832:  (configrom.cpp)[ 584] printConfigRom:     Current Node Id:    0
00565282935:  (configrom.cpp)[ 585] printConfigRom:     GUID:            0x0000000010000000
00565283046:  (configrom.cpp)[ 586] printConfigRom:     Vendor Name:        M-AUDIO
00565283137:  (configrom.cpp)[ 587] printConfigRom:     Model Name:        FW Audiophile Bootloader 
00565283233:  (configrom.cpp)[ 588] printConfigRom:     Node Vendor ID:        0x000000
00565283292:  (configrom.cpp)[ 589] printConfigRom:     Model Id:        0x00010060
00565283299:  (configrom.cpp)[ 590] printConfigRom:     Unit Specifier ID:    0x00a02d
00565283311:  (configrom.cpp)[ 591] printConfigRom:     Unit version:        0x00014001
00565283316:  (configrom.cpp)[ 592] printConfigRom:     ISO resource manager:    0
00565283326:  (configrom.cpp)[ 593] printConfigRom:     Cycle master capable:    0
00565283331:  (configrom.cpp)[ 594] printConfigRom:     Bus manager capable:    0
00565283341:  (configrom.cpp)[ 595] printConfigRom:     Cycle clock accuracy:    100
00565283345:  (configrom.cpp)[ 596] printConfigRom:     Max rec:        8 (max asy payload: 512 bytes)
Info Registers
    Manufactors Id:        bridgeCo
    Protocol Version:    0x00000001
    Bootloader Version:    0x00002803
    GUID:            0x0000000000000000
    Hardware Model ID:    0x0000000d
    Hardware Revision:    0x00000001
    Software Date:        04.05.2007, 10:22:12
    Software Id:        0x00010060
    Software Version:    0x00ffffff
    Base Address:        0x20080000
    Max. Image Len:        0x00180000
    Bootloader Date:    06.10.2003, 10:00:41
    Debugger Id:        0x00000000
    Debugger Version:    0x00000000
............
new GUID programmed
no message buffer overruns
ça fonctionne! Par contre le téléchargement du firmware ne fonction toujours pas.
Quand je lance ffado-mixer 
17:41:05 dbus             DEBUG    connecting to: Updated on /org/ffado/Control/DeviceManager (server: org.ffado.Control)
panelmanager     DEBUG    PanelManager::updatePanels()
panelmanager     DEBUG    going to add 0000000000000000
panelmanager     DEBUG    Adding device 0: 0000000000000000
panelmanager     DEBUG     Found (0000000000000000, 0, 10060) M-Audio FW Audiophile
registration     DEBUG    user requested to ignore registration
Je lance ensuite QJackCtl 
17:46:39.161 Baie de brassage activée.
17:46:39.223 Réinitialisation des statistiques.
17:46:39.255 D-BUS: Service not available (org.jackaudio.service aka jackdbus).
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server socket
jack server is not running or cannot be started
17:46:39.268 Changement du graphique des connexions ALSA.
17:46:39.475 Balayage de la baie de brassage ALSA active...
17:46:39.477 Changement des connexions ALSA.
17:46:39.677 Balayage de la baie de brassage ALSA active...
17:46:41.245 Script de démarrage...
17:46:41.246 artsshell -q terminate
Cannot connect to server socket err = Aucun fichier ou dossier de ce type
Cannot connect to server socket
jack server is not running or cannot be started
sh: artsshell : commande introuvable
17:46:41.650 Script de démarrage terminé avec statut de sortie=32512.
17:46:41.651 JACK démarre...
17:46:41.651 /usr/bin/jackd -P70 -dfirewire -r96000 -p128 -n3
17:46:41.659 JACK a été démarrer avec le PID=4073.
no message buffer overruns
no message buffer overruns
jackdmp 1.9.5
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2009 Grame.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 70
01225220729:  (ffado.cpp)[  92] ffado_streaming_init: libffado 2.999.0- built Jul 18 2010 21:25:52
17:46:55.373 Configuration du serveur enregistrée dans "/home/Corentin/.jackdrc".
17:46:55.375 Réinitialisation des statistiques.
17:46:55.384 Client activé.
17:46:55.386 Changement des connexions JACK.
17:46:55.396 Changement du graphique des connexions JACK.
17:46:55.797 Balayage de la baie de brassage JACK active...
17:46:55.815 M-Audio Firewire Audiophile: system:0000000000000000_LineIn L -> system:0000000000000000_LineOut1 L connecté.
17:46:55.831 M-Audio Firewire Audiophile: system:0000000000000000_LineIn R -> system:0000000000000000_LineOut1 R connecté.
17:46:55.840 M-Audio Firewire Audiophile: system:0000000000000000_SPDIFIn L -> system:0000000000000000_SPDIFOut L connecté.
17:46:55.848 M-Audio Firewire Audiophile: system:0000000000000000_SPDIFIn R -> system:0000000000000000_SPDIFOut R connecté.
17:46:55.851 Changement du graphique des connexions JACK.
17:46:56.051 Balayage de la baie de brassage JACK active...
17:46:56.054 M-Audio Firewire Audiophile: system:0000000000000000_LineIn L -> system:0000000000000000_LineOut1 L vérifié.
17:46:56.056 M-Audio Firewire Audiophile: system:0000000000000000_LineIn R -> system:0000000000000000_LineOut1 R vérifié.
17:46:56.057 M-Audio Firewire Audiophile: system:0000000000000000_SPDIFIn L -> system:0000000000000000_SPDIFOut L vérifié.
17:46:56.059 M-Audio Firewire Audiophile: system:0000000000000000_SPDIFIn R -> system:0000000000000000_SPDIFOut R vérifié.
17:48:03.070 Changement du graphique des connexions ALSA.
17:48:03.150 Balayage de la baie de brassage ALSA active...
17:48:21.566 Changement du graphique des connexions ALSA.
17:48:21.739 Balayage de la baie de brassage ALSA active...
17:49:25.841 Changement du graphique des connexions ALSA.
17:49:26.036 Balayage de la baie de brassage ALSA active...
17:49:30.668 Changement du graphique des connexions ALSA.
17:49:30.843 Balayage de la baie de brassage ALSA active...
17:53:13.857 Changement des connexions ALSA.
17:53:13.890 Balayage de la baie de brassage ALSA active...
17:53:30.541 Changement des connexions ALSA.
17:53:30.566 Balayage de la baie de brassage ALSA active...
Je cherche maintenant à l'utiliser avec Ableton Live sous wine.
Je suis obliger de re lancer le setguid à chaque fois ainsi que le modprobe raw1394. une idée ?