Voila, j'ai resolu mon probleme et reboote sur FC13 😃
J'ai pas trop compris d'ou venait le probleme, mais ajouter l'option apci=off au demarrage a fonctionne.
J'ai aussi amene mes ports USB a fonctionner. Ca aussi c'etait au niveau du BIOS. Il fallait desactiver la reconnaissance automatique des peripheriques USB, qui entrait en conflit avec le kernel.
Sinon, dmesg me renvoit :
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33.3-85.fc13.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:09:49 UTC 2010
Command line: ro root=UUID=f50f6831-52f9-4dfc-b6ad-d7c9c8c112ce rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us-acentos nomodeset rhgb acpi=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf680000 (usable)
BIOS-e820: 00000000bf680000 - 00000000bf6bf000 (reserved)
BIOS-e820: 00000000bf6bf000 - 00000000bf757000 (usable)
BIOS-e820: 00000000bf757000 - 00000000bf7bf000 (ACPI NVS)
BIOS-e820: 00000000bf7bf000 - 00000000bf7e2000 (usable)
BIOS-e820: 00000000bf7e2000 - 00000000bf7ff000 (ACPI data)
BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
No AGP bridge found
last_pfn = 0x138000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-EFFFF write-through
F0000-FFFFF write-combining
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 0FFE80000 mask FFFF80000 write-protect
2 base 0FFF00000 mask FFFF00000 write-protect
3 base 080000000 mask FC0000000 write-back
4 base 0BF800000 mask FFF800000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 138000000 mask FF8000000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 8000-c000
init_memory_mapping: 0000000100000000-0000000138000000
0100000000 - 0138000000 page 2M
kernel direct mapping tables up to 138000000 @ a000-10000
RAMDISK: 7f498000 - 7fffede6
No NUMA configuration found
Faking a node at 0000000000000000-0000000138000000
Bootmem setup node 0 0000000000000000-0000000138000000
NODE_DATA [000000000000b000 - 0000000000020fff]
bootmap [0000000000021000 - 0000000000047fff] pages 27
(9 early reservations) ==> bootmem [0000000000 - 0138000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0001db92c8] TEXT DATA BSS ==> [0001000000 - 0001db92c8]
#2 [007f498000 - 007fffede6] RAMDISK ==> [007f498000 - 007fffede6]
#3 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
#4 [0001dba000 - 0001dba25e] BRK ==> [0001dba000 - 0001dba25e]
#5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#8 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001e00000-ffff8800055fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00138000
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x000bf680
0: 0x000bf6bf -> 0x000bf757
0: 0x000bf7bf -> 0x000bf7e2
0: 0x000bf7ff -> 0x000bf800
0: 0x00100000 -> 0x00138000
On node 0 totalpages: 1013465
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3832 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765812 pages, LIFO batch:31
Normal zone: 3136 pages used for memmap
Normal zone: 226240 pages, LIFO batch:31
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf680000 - 00000000bf6bf000
PM: Registered nosave memory: 00000000bf757000 - 00000000bf7bf000
PM: Registered nosave memory: 00000000bf7e2000 - 00000000bf7ff000
PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe80000
PM: Registered nosave memory: 00000000ffe80000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880005800000 s90520 r8192 d24168 u2097152
pcpu-alloc: s90520 r8192 d24168 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 995884
Policy zone: Normal
Kernel command line: ro root=UUID=f50f6831-52f9-4dfc-b6ad-d7c9c8c112ce rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us-acentos nomodeset rhgb acpi=off
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3904216k/5111808k available (4295k kernel code, 1057948k absent, 149644k reserved, 7535k data, 756k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 40632320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2266.729 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.45 BogoMIPS (lpj=2266729)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
SMP alternatives: switching to UP code
Freeing SMP alternatives: 34k freed
Setting APIC routing to flat
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4533.45 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=792 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5968 bytes
devtmpfs: initialized
regulator: core version 0.5
Time: 9:24:56 Date: 08/04/10
NET: Registered protocol family 16
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xdb106100-0xdb10610f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdb105c00-0xdb105fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xdb100000-0xdb103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdb105800-0xdb105bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0x6048-0x604f]
pci 0000:00:1f.2: reg 14: [io 0x6054-0x6057]
pci 0000:00:1f.2: reg 18: [io 0x6040-0x6047]
pci 0000:00:1f.2: reg 1c: [io 0x6050-0x6053]
pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f]
pci 0000:00:1f.2: reg 24: [mem 0xdb105000-0xdb1057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xdb106000-0xdb1060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
pci 0000:00:1f.6: reg 10: [mem 0xdb104000-0xdb104fff 64bit]
pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io 0x5000-0x507f]
pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: reg 10: [mem 0xd3000000-0xd3003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:02:00.0: reg 18: [mem 0xd3110000-0xd3110fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd3100000-0xd310ffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xda100000-0xdb0fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 14: [mem 0xd9100000-0xd9103fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd9100000-0xda0fffff]
pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xd8100a00-0xd8100aff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xd8100900-0xd81009ff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.2: reg 10: [mem 0xd8100800-0xd81008ff]
pci 0000:04:00.2: supports D1 D2
pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.2: PME# disabled
pci 0000:04:00.3: reg 10: [mem 0xd8100000-0xd81007ff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xd8100000-0xd90fffff]
pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 20-22]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd7100000-0xd80fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
PCI: Discovered primary peer bus 07 [IRQ]
PCI: Discovered primary peer bus 0b [IRQ]
PCI: Discovered primary peer bus 0c [IRQ]
PCI: Discovered primary peer bus 0d [IRQ]
PCI: Discovered primary peer bus 0e [IRQ]
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3b09]
PCI: setting IRQ 7 as level-triggered
pci 0000:00:01.0: found PCI INT A -> IRQ 7
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:16.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:1a.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:1c.1
pci 0000:00:01.0: sharing IRQ 7 with 0000:01:00.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:01:00.1
pci 0000:00:01.0: sharing IRQ 7 with 0000:02:00.0
PCI: setting IRQ 10 as level-triggered
pci 0000:00:1c.0: found PCI INT A -> IRQ 10
pci 0000:00:1c.0: sharing IRQ 10 with 0000:00:1c.4
PCI: setting IRQ 11 as level-triggered
pci 0000:00:1c.3: found PCI INT D -> IRQ 11
pci 0000:00:1c.3: sharing IRQ 11 with 0000:00:1f.2
pci 0000:00:1c.3: sharing IRQ 11 with 0000:00:1f.3
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI: disabled
pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xd3120000-0xd313ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xda100000-0xdb0fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xd9100000-0xda0fffff]
pci 0000:00:1c.1: bridge window [mem 0xd4100000-0xd50fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xd8100000-0xd90fffff]
pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 20-22]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd7100000-0xd80fffff]
pci 0000:00:1c.4: bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: found PCI INT A -> IRQ 7
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:16.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:1a.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:00:1c.1
pci 0000:00:01.0: sharing IRQ 7 with 0000:01:00.0
pci 0000:00:01.0: sharing IRQ 7 with 0000:01:00.1
pci 0000:00:01.0: sharing IRQ 7 with 0000:02:00.0
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: found PCI INT A -> IRQ 10
pci 0000:00:1c.0: sharing IRQ 10 with 0000:00:1c.4
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: found PCI INT B -> IRQ 7
pci 0000:00:1c.1: sharing IRQ 7 with 0000:00:01.0
pci 0000:00:1c.1: sharing IRQ 7 with 0000:00:16.0
pci 0000:00:1c.1: sharing IRQ 7 with 0000:00:1a.0
pci 0000:00:1c.1: sharing IRQ 7 with 0000:01:00.0
pci 0000:00:1c.1: sharing IRQ 7 with 0000:01:00.1
pci 0000:00:1c.1: sharing IRQ 7 with 0000:02:00.0
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: found PCI INT D -> IRQ 11
pci 0000:00:1c.3: sharing IRQ 11 with 0000:00:1f.2
pci 0000:00:1c.3: sharing IRQ 11 with 0000:00:1f.3
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: found PCI INT A -> IRQ 10
pci 0000:00:1c.4: sharing IRQ 10 with 0000:00:1c.0
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xda100000-0xdb0fffff]
pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd9100000-0xda0fffff]
pci_bus 0000:03: resource 2 [mem 0xd4100000-0xd50fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xd8100000-0xd90fffff]
pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
pci_bus 0000:20: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:20: resource 1 [mem 0xd7100000-0xd80fffff]
pci_bus 0000:20: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
pci_bus 0000:05: resource 3 [io 0x0000-0xffff]
pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 0 [io 0x0000-0xffff]
pci_bus 0000:07: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:0b: resource 0 [io 0x0000-0xffff]
pci_bus 0000:0b: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:0c: resource 0 [io 0x0000-0xffff]
pci_bus 0000:0c: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:0d: resource 0 [io 0x0000-0xffff]
pci_bus 0000:0d: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:0e: resource 0 [io 0x0000-0xffff]
pci_bus 0000:0e: resource 1 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11675k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000581f000 - ffff88000981f000
software IO TLB at phys 0x581f000 - 0x981f000
platform rtc_cmos: registered platform RTC device (no PNP device found)
Intel PCLMULQDQ-NI instructions are not detected.
audit: initializing netlink socket (disabled)
type=2000 audit(1280913895.464:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7648
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 16 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 17 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 18 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 19 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 20 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: found PCI INT B -> IRQ 11
ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1f.3
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 21 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105180 irq 21
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdb105000 port 0xdb105300 irq 21
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 7
ehci_hcd 0000:00:1a.0: sharing IRQ 7 with 0000:00:16.0
ehci_hcd 0000:00:1a.0: sharing IRQ 7 with 0000:01:00.0
ehci_hcd 0000:00:1a.0: sharing IRQ 7 with 0000:01:00.1
ehci_hcd 0000:00:1a.0: sharing IRQ 7 with 0000:02:00.0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 7, io mem 0xdb105c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 10
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 10, io mem 0xdb105800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 6:638:423
rtc_cmos rtc_cmos: setting system clock to 2010-08-04 09:24:56 UTC (1280913896)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata2.00: ATA-8: WDC WD3200BEVT-26ZCT0, 12.01A12, max UDMA/133
ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 12.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: new high speed USB device using ehci_hcd and address 3
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1e0b1, caps: 0xd04731/0xa40000
synaptics: Toshiba Satellite A500 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b128
usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-1.3: Product: USB2.0 UVC WebCam
usb 1-1.3: Manufacturer: Chicony Electronics Co., Ltd.
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF02, max UDMA/100, ATAPI AN
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 756k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1828k freed
Freeing unused kernel memory: 1960k freed
dracut: dracut-005-3.fc13
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
udev: starting version 151
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
firewire_ohci 0000:04:00.3: found PCI INT C -> IRQ 10
firewire_ohci 0000:04:00.3: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:04:00.3, OHCI version 1.10
irq 10: nobody cared (try booting with the "irqpoll" option)
Pid: 184, comm: modprobe Not tainted 2.6.33.3-85.fc13.x86_64 #1
Call Trace:
<IRQ> [<ffffffff8109b864>] __report_bad_irq+0x38/0x87
[<ffffffff8109b9c6>] note_interrupt+0x113/0x179
[<ffffffff8109c162>] handle_level_irq+0x89/0xc9
[<ffffffff8100c2dd>] handle_irq+0x83/0x8e
[<ffffffff8100b907>] do_IRQ+0x57/0xbe
[<ffffffff8142b1d3>] ret_from_intr+0x0/0x11
[<ffffffff8105164a>] ? __do_softirq+0x65/0x1a1
[<ffffffff8100aa1c>] ? call_softirq+0x1c/0x30
[<ffffffff8100c21d>] ? do_softirq+0x41/0x7e
[<ffffffff81051518>] ? irq_exit+0x36/0x78
[<ffffffff8100b957>] ? do_IRQ+0xa7/0xbe
[<ffffffff8142b1d3>] ? ret_from_intr+0x0/0x11
<EOI> [<ffffffff81155c0b>] ? sysfs_do_create_link+0x4f/0x132
[<ffffffff81155c07>] ? sysfs_do_create_link+0x4b/0x132
[<ffffffff814137be>] ? klist_next+0x37/0xa8
[<ffffffff812ae8d0>] ? __driver_attach+0x0/0x7c
[<ffffffff81155d09>] ? sysfs_create_link+0xe/0x11
[<ffffffff812b8827>] ? module_add_driver+0x67/0xb4
[<ffffffff812adf2c>] ? bus_add_driver+0x141/0x27d
[<ffffffff812aec01>] ? driver_register+0x99/0x10a
[<ffffffff8121495b>] ? __pci_register_driver+0x53/0xc3
[<ffffffffa004d000>] ? fw_ohci_init+0x0/0x20 [firewire_ohci]
[<ffffffffa004d01e>] ? fw_ohci_init+0x1e/0x20 [firewire_ohci]
[<ffffffff8100205f>] ? do_one_initcall+0x59/0x154
[<ffffffff8107aac9>] ? sys_init_module+0xd1/0x230
[<ffffffff81009b02>] ? system_call_fastpath+0x16/0x1b
handlers:
[<ffffffff81304b26>] (usb_hcd_irq+0x0/0x76)
Disabling IRQ #10
EXT4-fs (sda4): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/sda4
dracut: Loading SELinux policy
type=1404 audit(1280913900.207:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 198353 rules.
SELinux: 8192 avtab hash slots, 198353 rules.
SELinux: 9 users, 13 roles, 3307 types, 165 bools, 1 sens, 1024 cats
SELinux: 77 classes, 198353 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda4, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1280913900.594:3): policy loaded auid=4294967295 ses=4294967295
dracut: Switching root
readahead: starting
udev: starting version 151
microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
i801_smbus 0000:00:1f.3: found PCI INT C -> IRQ 11
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: found PCI INT A -> IRQ 7
r8169 0000:02:00.0: sharing IRQ 7 with 0000:00:16.0
r8169 0000:02:00.0: sharing IRQ 7 with 0000:00:1a.0
r8169 0000:02:00.0: sharing IRQ 7 with 0000:01:00.0
r8169 0000:02:00.0: sharing IRQ 7 with 0000:01:00.1
r8169 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
r8169 0000:02:00.0: irq 22 for MSI/MSI-X
eth0: RTL8102e at 0xffffc90001068000, 00:26:6c:45:a8:80, XID 04c00000 IRQ 22
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 1)
PCI: setting IRQ 9 as level-triggered
sdhci-pci 0000:04:00.0: found PCI INT D -> IRQ 9
sdhci-pci 0000:04:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:04:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128)
input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
r8192se_pci: version magic '2.6.33.6-147.fc13.x86_64 SMP mod_unload ' should be '2.6.33.3-85.fc13.x86_64 SMP mod_unload '
type=1400 audit(1280913905.278:4): avc: denied { mmap_zero } for pid=549 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 11
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 23 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC272: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4296: dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_realtek.c:1297: realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1313: realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
HDA Intel 0000:01:00.1: found PCI INT A -> IRQ 7
HDA Intel 0000:01:00.1: sharing IRQ 7 with 0000:00:16.0
HDA Intel 0000:01:00.1: sharing IRQ 7 with 0000:00:1a.0
HDA Intel 0000:01:00.1: sharing IRQ 7 with 0000:01:00.0
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:01:00.1: setting latency timer to 64
ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
ALSA sound/pci/hda/hda_generic.c:683: hda_generic: no proper input path found
ALSA sound/pci/hda/hda_generic.c:431: hda_generic: no proper output path found
ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
ALSA sound/pci/hda/hda_generic.c:1035: hda_generic: no PCM found
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
usb 2-1.3: new high speed USB device using ehci_hcd and address 3
usb 2-1.3: New USB device found, idVendor=154b, idProduct=6545
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: USB 2.0 FD
usb 2-1.3: Manufacturer: PNY
usb 2-1.3: SerialNumber: 1100930CF112554B
Initializing USB Mass Storage driver...
scsi6 : usb-storage 2-1.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 6:0:0:0: Direct-Access PNY USB 2.0 FD 8.02 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
Sinon, $dmesg ne renvoit rien.