Me revoilà !
Eh bien, ça n'a pas fonctionné. Au reboot de ma session, j'ai eu mon fond d'écran pendant une demi-seconde et puis un écran blanc où seul le pointeur de ma souris était visible ( probablement quand cairo-dock, qui est en démarrage automatique, a voulu se lancer, ou alors compiz-fusion,aussi automatique,... ? je ne sais pas ). Et plus moyen de rien faire à part un ctrl-alt-backspace pour sortir de ma session.
J'ai donc remis mon xorg.conf à sa place et rebooté.
Voici mon Xorg.0.log.old ( celui du reboot sans Xorg.conf ), c'est nouveau qui a été employé à la place de nvidia :
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-164.el5 x86_64
Current Operating System: Linux localhost.localdomain 2.6.30.8-64.fc11.x86_64 #1 SMP Fri Sep 25 04:43:32 EDT 2009 x86_64
Kernel command line: ro root=UUID=5f38242a-4e87-405a-871d-663d533eb601 rhgb vga=0x37B quiet
Build Date: 09 September 2009 11:26:05AM
Build ID: xorg-x11-server 1.6.4-0.1.fc11
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 25 16:46:29 2009
(II) Loader magic: 0x7b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 1
(--) PCI:*(0:1:0:0) 10de:05e2:3842:1265 nVidia Corporation GT200 [GeForce GTX 260] rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x00009800/128, BIOS @ 0x????????/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default nouveau Device 0"
Driver "nouveau"
EndSection
Section "Screen"
Identifier "Builtin Default nouveau Screen 0"
Device "Builtin Default nouveau Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default nouveau Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nouveau Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default nouveau Device 0"
(==) No monitor specified for screen "Builtin Default nouveau Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib64/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) NOUVEAU driver
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(--) NOUVEAU(0): Chipset: "NVIDIA NVA0"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib64/xorg/modules/extensions//libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
(--) NOUVEAU(0): [drm] kernel modesetting not available
(!!) NOUVEAU(0): Acceleration disabled, currently non-functional on this chipset
(--) NOUVEAU(0): VESA-HACK: Console VGA mode is 0x17b
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Builtin Default nouveau Screen 0" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) NOUVEAU(0): Randr1.2 support enabled
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xFD000000
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(II) NOUVEAU(0): Attempting to load BIOS image from PRAMIN
(II) NOUVEAU(0): ... appears to be valid
(II) NOUVEAU(0): BIT BIOS found
(II) NOUVEAU(0): Bios version 62.00.1a.00
(WW) NOUVEAU(0): TMDS table revision 2.0 not currently supported
(II) NOUVEAU(0): Found Display Configuration Block version 4.0
(!!) NOUVEAU(0): Raw DCB entry 0: 04000320 00000028
(!!) NOUVEAU(0): Raw DCB entry 1: 01000322 00020030
(!!) NOUVEAU(0): Raw DCB entry 2: 02011310 00000028
(!!) NOUVEAU(0): Raw DCB entry 3: 02011312 00020030
(!!) NOUVEAU(0): Raw DCB entry 4: 010223f1 00c1c020
(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0xCB1C
(EE) NOUVEAU(0): ========== unknown reg 0x00021148 ==========
(EE) NOUVEAU(0): ========== unknown reg 0x00021144 ==========
(EE) NOUVEAU(0): ========== unknown reg 0x00088610 ==========
(EE) NOUVEAU(0): ========== unknown reg 0x00088138 ==========
(II) NOUVEAU(0): I2C bus "DCB-I2C-3" initialized.
(II) NOUVEAU(0): I2C device "DCB-I2C-3:init script device" registered at address 0x5C.
(II) NOUVEAU(0): I2C device "DCB-I2C-3:init script device" removed.
(II) NOUVEAU(0): I2C device "DCB-I2C-3:init script device" registered at address 0xE0.
(II) NOUVEAU(0): I2C device "DCB-I2C-3:init script device" removed.
(EE) NOUVEAU(0): ========== unknown reg 0x00020074 ==========
(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0xCDC3
(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0xE227
(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0xE328
(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0xE3D6
(II) NOUVEAU(0): NV50DispPreInit is called.
(WW) NOUVEAU(0): DCB encoder type 1 not known
(II) NOUVEAU(0): I2C bus "DVI-I-0" initialized.
(II) NOUVEAU(0): I2C bus "DVI-I-1" initialized.
(II) NOUVEAU(0): Output DVI-I-1 has no monitor section
(II) NOUVEAU(0): Output DVI-I-0 has no monitor section
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): I2C device "DVI-I-1:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "DVI-I-1:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): Detected a Digital output on DVI-I-1
(II) NOUVEAU(0): Found a suitable output, index 1
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): EDID for output DVI-I-1
(II) NOUVEAU(0): Manufacturer: SAM Model: 52a Serial#: 1162228275
(II) NOUVEAU(0): Year: 2008 Week: 51
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.650 redY: 0.337 greenX: 0.295 greenY: 0.605
(II) NOUVEAU(0): blueX: 0.147 blueY: 0.075 whiteX: 0.312 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
(II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
(II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: H1AK500000
(II) NOUVEAU(0): Number of EDID sections to follow: 1
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff004c2d2a0533324645
(II) NOUVEAU(0): 3312010380331d782a98d1a6564b9b25
(II) NOUVEAU(0): 1350542308008100814081809500b300
(II) NOUVEAU(0): a94001010101023a801871382d40582c
(II) NOUVEAU(0): 4500fe1f1100001e000000fd00383d1e
(II) NOUVEAU(0): 5111000a202020202020000000fc0053
(II) NOUVEAU(0): 796e634d61737465720a2020000000ff
(II) NOUVEAU(0): 004831414b3530303030300a2020016b
(II) NOUVEAU(0): 02010400023a80d072382d40102c4580
(II) NOUVEAU(0): fe1f1100001e011d007251d01e206e28
(II) NOUVEAU(0): 5500fe1f1100001e011d00bc52d01e20
(II) NOUVEAU(0): b8285540fe1f1100001e8c0ad0902040
(II) NOUVEAU(0): 31200c405500fe1f110000188c0ad08a
(II) NOUVEAU(0): 20e02d10103e9600fe1f110000180000
(II) NOUVEAU(0): 00000000000000000000000000000000
(II) NOUVEAU(0): 00000000000000000000000000000003
(II) NOUVEAU(0): EDID vendor "SAM", prod id 1322
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) NOUVEAU(0): NV50ConnectorGetDDCModes is called.
(II) NOUVEAU(0): EDID vendor "SAM", prod id 1322
(II) NOUVEAU(0): DVI-I-1: preferred mode is 1920x1080
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): nv50_output_mode_valid is called.
(II) NOUVEAU(0): Not using mode "1600x1200" (exceeds panel dimensions)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-1
(II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): nv50_output_detect is called.
(II) NOUVEAU(0): NV50ConnectorDDCDetect is called.
(II) NOUVEAU(0): I2C device "DVI-I-0:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "DVI-I-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): Using bios provided load value of 480
(--) NOUVEAU(0): No Load present on DAC-2
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Output DVI-I-1 connected
(II) NOUVEAU(0): Output DVI-I-0 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 1920)
(**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz)
(**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (510, 290) mm
(**) NOUVEAU(0): DPI set to (95, 94)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib64/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NOUVEAU(0): Allocated 128MiB VRAM for framebuffer + offscreen pixmaps, at offset 0x47FE0000
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): NVEnterVT is called.
(II) NOUVEAU(0): AGPGART: 32MiB available
(II) NOUVEAU(0): NV50DispInit is called.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC0.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50SorGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_output_get_crtc is called.
(II) NOUVEAU(0): NV50DacGetCurrentCrtc is called.
(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1.
(II) NOUVEAU(0): nv50_output_prepare is called.
(II) NOUVEAU(0): nv50_crtc_prepare is called for CRTC0.
(II) NOUVEAU(0): NV50DacModeSet is called.
(II) NOUVEAU(0): Disconnecting DAC.
(II) NOUVEAU(0): NV50SorModeSet is called.
(II) NOUVEAU(0): Disconnecting SOR.
(II) NOUVEAU(0): NV50DacModeSet is called.
(II) NOUVEAU(0): Disconnecting DAC.
(II) NOUVEAU(0): nv50_crtc_mode_set is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcModeSet is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcSetDither is called (no update).
(II) NOUVEAU(0): NV50CrtcBlank is called (unblanked) for CRTC0.
(II) NOUVEAU(0): nv50_output_mode_set is called.
(II) NOUVEAU(0): NV50SorModeSet is called.
(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 0.
(II) NOUVEAU(0): NV50CrtcSetScale is called with mode 2 for CRTC0.
(II) NOUVEAU(0): nv50_crtc_commit is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1.
(II) NOUVEAU(0): NV50CrtcSetPixelClock is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcSetClockMode is called for CRTC0.
(II) NOUVEAU(0): NV50SorSetClockMode is called.
(II) NOUVEAU(0): nv50_output_commit is called.
(II) NOUVEAU(0): nv50_output_dpms is called with mode 3.
(II) NOUVEAU(0): NV50DacSetPowerMode is called with mode 3.
(II) NOUVEAU(0): NV50SorSetPowerMode is called with mode 3.
(II) NOUVEAU(0): nv50_crtc_dpms is called with mode 3 for CRTC1.
(II) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC0.
(II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC0.
(II) NOUVEAU(0): nv50_crtc_gamma_set is called for CRTC1.
(II) NOUVEAU(0): NV50CrtcGammaSet is called for CRTC1.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 510 x 287
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "be"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event5"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) NOUVEAU(0): NVLeaveVT is called.
(II) NOUVEAU(0): NV50DispShutdown is called.
(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC0.
(II) NOUVEAU(0): NV50CrtcBlank is called (blanked) for CRTC1.
