Ou est el xorg.conf ?

Kaeguri · 6 oct. 2009

Bonjour,

J'ai un DELL E4300, ce dernier est, l aplupart du temps, branch'e sur un ecran DELL optimise pour le 1680x1050.
J'ai bien vu 2 ou 3 posts qui expliquent commetn ajouter la nouvelle config cependant il me semble que depuis
Fedora 10 (ou encore avant ?) il n'y a plus de fichier xorg.conf mais un fichier xorg.cf.

La je suis sous F11 et je ne vois ni l'un ni l'autre !
Dois-je les creer de toutes pieces ?
Quel fil me conseillez vous pour resoudre en douceur l'ajout de la config 1680x1050 ?

Si non je suis etonne depuis les dernieres versions de Fedora je susi habitue a voir
les resolutions les plus exotiques etre prises automatiquement...

Merci !

pmarion · 6 oct. 2009

Depuis F10 et son nouvel Xorg, il n'y a pas obligatoirement de fichier /etc/X11/xorg.conf.
En fait en cas d'absence de ce fichier Xorg essaie de reconnaitre le matériel et de s'auto-configurer.

Essaie de voir le log de Xorg
cat /var/log/Xorg.0.log
pour voir comment est reconnu ton matériel.

Tu peux aussi essayer
system-config-display
ou
system-config-display --reconfigure
pour voir si ce produit reconnait ton materiel.

Kaeguri · 6 oct. 2009

Voila ce que renvoie la commande cat /var/log/Xorg.0.log :

X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-164.el5 i686 
Current Operating System: Linux nbatlas10 2.6.30.8-64.fc11.i686.PAE #1 SMP Fri Sep 25 04:56:58 EDT 2009 i686
Kernel command line: ro root=/dev/mapper/vg_nbatlas10-lv_root rhgb quiet
Build Date: 09 September 2009  11:25:24AM
Build ID: xorg-x11-server 1.6.4-0.1.fc11 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct  6 13:40:17 2009
(II) Loader magic: 0xa40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 1

(--) PCI:*(0:0:2:0) 8086:2a42:1028:024d Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf6c00000/4194304, 0xe0000000/268435456, I/O @ 0x0000ef98/8, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default intel Device 0"
        Driver    "intel"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default intel Screen 0"
        Device    "Builtin Default intel Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default intel Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 2.7.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.4.0
    ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 0.0.2
    ABI class: X.Org Video Driver, version 5.0
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(II) intel(0): Resizable framebuffer: available (0 4)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): Output DVI2 has no monitor section
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(WW) intel(0): Assuming version 1.19 is compatible with 1.4
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LGD  Model: 4601  Serial#: 0
(II) intel(0): Year: 2008  Week: 0
(II) intel(0): EDID Version: 1.19
(II) intel(0): Digital Display Input
(II) intel(0): 6 bits per channel
(II) intel(0): Digital interface is undefined
(II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 18
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.586 redY: 0.353   greenX: 0.335 greenY: 0.549
(II) intel(0): blueX: 0.150 blueY: 0.121   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.0 MHz   Image Size:  286 x 179 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1410 h_border: 0
(II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 816 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 47.4 MHz   Image Size:  286 x 179 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0):  WU973133WX2
(II) intel(0):  3]
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff0030e4014600000000
(II) intel(0):     00120113901d12780a1e85965a558c26
(II) intel(0):     1f505400000001010101010101010101
(II) intel(0):     010101010101f41a0082502010303020
(II) intel(0):     36001eb310000018841200a050201730
(II) intel(0):     302036001eb310000018000000fe0057
(II) intel(0):     55393733803133335758320a000000fe
(II) intel(0):     00080e1419335d7fff01010a202000c2
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0   69.00  1280 1328 1360 1410  800 803 809 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1280x800"x40.0   47.40  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (32.9 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: DEL  Model: 403c  Serial#: 825635405
(II) intel(0): Year: 2008  Week: 30
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.666 redY: 0.318   greenX: 0.196 greenY: 0.674
(II) intel(0): blueX: 0.151 blueY: 0.080   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): #2: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 146.2 MHz   Image Size:  473 x 296 mm
(II) intel(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
(II) intel(0): Serial No: G456H87P162M
(II) intel(0): Monitor name: DELL 2208WFP
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 160 MHz
(II) intel(0): EDID (in hex):
(II) intel(0):     00ffffffffffff0010ac3c404d323631
(II) intel(0):     1e120103802f1e78eaa6e5aa5132ac26
(II) intel(0):     145054a54b00714f8180b30001010101
(II) intel(0):     01010101010121399030621a274068b0
(II) intel(0):     3600d9281100001c000000ff00473435
(II) intel(0):     36483837503136324d0a000000fc0044
(II) intel(0):     454c4c20323230385746500a000000fd
(II) intel(0):     00384c1e5310000a20202020202000b4
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DVI2
(II) intel(0): EDID for output TV1
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Printing probed modes for output TV1
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DVI1 connected
(II) intel(0): Output DVI2 disconnected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using sloppy heuristic for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Output DVI1 using initial mode 1280x1024
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(WW) intel(0): [DRI2] Version 1 API (broken front buffer rendering)
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 4194303 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): max_gtt_map_size: 53524kb.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(EE) intel(0): max_gtt_map_size: 53524kb.
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0xffffffff: DRI memory manager (0 kB)
(II) intel(0): 0x00000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x00000000:            start of memory manager
(II) intel(0): 0x026eb000-0x02beafff: front buffer (5120 kB) X tiled
(II) intel(0): 0x026db000-0x026e4fff: HW cursors (40 kB)
(II) intel(0): 0x00000000:            end of memory manager
(EE) intel(0): max_gtt_map_size: 53524kb.
(EE) intel(0): max_gtt_map_size: 53524kb.
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 286 x 229
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event6"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) set acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event5"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) filter chain progression: 2.00
(**) DualPoint Stick: (accel) filter stage 0: 20.00 ms
(**) DualPoint Stick: (accel) set acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device Dell Dell USB Keyboard
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event10"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device HID 413c:8161
(**) HID 413c:8161: always reports core events
(**) HID 413c:8161: Device: "/dev/input/event7"
(II) HID 413c:8161: Found keys
(II) HID 413c:8161: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInerti

Kaeguri · 7 oct. 2009

Le lancement de system-config-display n'a rien fait, j'ai pourtant dit dans l'onglet "Moniteur" que j'avais un1680x1050 mais rien n'y fait il se met toujours en 1280x1024. mon xrog.conf ressemble à ça maintenant :

# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
# keyboard added by rhpxl
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105+inet"
        Option      "XkbLayout" "us"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        ModelName    "LCD Panel 1680x1050"
        HorizSync    31.5 - 65.5
        VertRefresh  56.0 - 65.0
        Option      "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "intel"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Je sais qu'en utilisant system-settings cela marchait mais il fallait que je renouvelle l'opération chaque démarrage à savoir lancer system-settings et aller dans display.

Bubo · 7 oct. 2009

Il faut préciser le mode voulu dans xorg.conf :

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1680x1050"
        EndSubSection
EndSection

DalP · 7 oct. 2009

Salut,

Sous ma session, j'ai un fichier .config/monitors.xml où tous les écrans branchés à mon ordi sont référencé avec leur configuration (clone, resolution, décalage, rotation, ...)
Je poste le mien si ça peut aider :

<monitors version="1">
  <configuration>
      <clone>no</clone>
      <output name="VGA">
      </output>
      <output name="LVDS">
          <vendor>HSD</vendor>
          <product>0x03e9</product>
          <serial>0x0000f644</serial>
          <width>1024</width>
          <height>600</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
      </output>
  </configuration>
  <configuration>
      <clone>no</clone>
      <output name="VGA">
          <vendor>HIT</vendor>
          <product>0x8002</product>
          <serial>0x01326a43</serial>
          <width>1680</width>
          <height>1050</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
      </output>
      <output name="LVDS">
          <vendor>HSD</vendor>
          <product>0x03e9</product>
          <serial>0x0000f644</serial>
          <width>1024</width>
          <height>600</height>
          <rate>60</rate>
          <x>0</x>
          <y>1050</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
      </output>
  </configuration>
  <configuration>
      <clone>no</clone>
      <output name="VGA">
          <vendor>HIT</vendor>
          <product>0x8002</product>
          <serial>0x01326a43</serial>
          <width>1680</width>
          <height>1050</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
      </output>
      <output name="LVDS">
          <vendor>???</vendor>
          <product>0x0000</product>
          <serial>0x00000000</serial>
          <width>1024</width>
          <height>600</height>
          <rate>60</rate>
          <x>0</x>
          <y>1050</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
      </output>
  </configuration>
</monitors>

Kaeguri · 9 oct. 2009

Salut, l'ajout de Modes "1680x1050" n'a rien donné.
Savez vous comment installer l'application qui permet de lancer la commande system-settings ?
il me semble que c'est un appli KDE. Je sais qu'avec ça cela marche mais il faut lancer le menu à chaque
fois...

Ou bien si vous avez d'autres suggestions merci !

Bubo · 12 oct. 2009

Kaeguri wrote:Salut, l'ajout de Modes "1680x1050" n'a rien donné.

Procédons autrement :
- ajoute au bas de la section «Monitor» :

Modeline "1680x1050_60.00"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
Modeline "1680x1050_75.00"  188.07  1680 1800 1984 2288  1050 1051 1054 1096  -HSync +Vsync

- et dans la section «screen» (à la place du précédent Modes) :

Modes  "1680x1050_60.00"  "1680x1050_75.00"

Redémarre le serveur X et poste le fichier /var/log/Xorg.0.log si cela ne fonctionne pas.

Kaeguri · 13 oct. 2009

SAlut,

Hier soir je faisais des essais en jouant directement dans : System > Preferences > Display, en indiquant que je voualis l'écran "unknown" en 1680 x 1050 et lce matin automatiquement il se met
en 1650 x 1050 ! Par contre il me sort que cela engendre un kernel failure.

Dois-je tenter ta solution (Bubo) ou bien je devrais rester comme cela.

Mon xrog.conf ressemble à cela maintenant :

# Xorg configuration created by system-config-display

Section "ServerLayout"
    Identifier     "single head configuration"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"

# keyboard added by rhpxl
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbModel" "pc105+inet"
    Option        "XkbLayout" "us"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    ModelName    "LCD Panel 1680x1050"
    HorizSync    31.5 - 65.5
    VertRefresh  56.0 - 65.0
    Option        "dpms"
EndSection

Section "Device"
    Identifier  "Videocard0"
    Driver      "intel"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Videocard0"
    Monitor    "Monitor0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Bubo · 13 oct. 2009

Kaeguri wrote:Dois-je tenter ta solution (Bubo) ou bien je devrais rester comme cela.

L'essentiel est que tu aies le résultat voulu ! 😉
Je te conseillerais de tester ma solution, qui est une méthode globale.
Au moins par curiosité, juste pour savoir si cela fonctionne (et poster le Xorg.0.log le cas échéant).

proxy · 13 oct. 2009

Kaeguri wrote:..
Savez vous comment installer l'application qui permet de lancer la commande system-settings ?
il me semble que c'est un appli KDE. Je sais qu'avec ça cela marche mais il faut lancer le menu à chaque
fois.....

C'est systemsettings sans tiret

roublon · 22 oct. 2009

Bonjour, après quelques années hors de Linux (red hat 7.2), j'y retourne j'étais déjà débuttant a l'époque mais la je galère, donc j'ai bien compris ce qui se passe a propos du "Xorg.conf", mais

avec ma vieille bécane,
:::carte mère : K7n420D;
:::processeur : Athlon XP 1700+;
:::512 Mo de RAM;
:::pour le reste quelques DD et autres lecteurs et graveurs sans trop d'importance...

j'ai installé la Fedora 11 (GNome) et je me trouve dans la même situation que "Kaeguri" après avoir vu que dans le "Xorg.conf" plein de choses étaient possibles, mais impossibilité de le trouver, jusqu'à ce que je trouve ce post sur le forum,

donc j'aimerai une explication (simple pour mon niveau de rouille dans l'utilisation de Linux...) si possible de comment pouvoir intégrer des résolutions plus confortable (genre 1280*960 ou plus si support de mon écran) que 1024*768 sur mon 19" (LG Flatron L1919S)

Merci ...

cordialement

nouvo09 · 22 oct. 2009

Tu ne dis pas quelle est ta carte graphique ?

roublon · 22 oct. 2009

Celle de la carte mère ... intégrée ...

oui j'ai oublié de le préciser ...

MarbolanGos · 22 oct. 2009

roublon wrote:Celle de la carte mère ... intégrée ...

oui j'ai oublié de le préciser ...

On sait toujours pas c'est quoi...

/sbin/lspci

roublon · 22 oct. 2009

[Roublon@fixmoi /]$ /sbin/lspci
00:00.0 Host bridge: nVidia Corporation nForce CPU bridge (rev b2)
00:00.1 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
00:00.2 RAM memory: nVidia Corporation nForce 220/420 Memory Controller (rev b2)
00:00.3 RAM memory: nVidia Corporation nForce 420 Memory Controller (DDR) (rev b2)
00:01.0 ISA bridge: nVidia Corporation nForce ISA Bridge (rev c3)
00:01.1 SMBus: nVidia Corporation nForce PCI System Management (rev c1)
00:02.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3)
00:03.0 USB Controller: nVidia Corporation nForce USB Controller (rev c3)
00:04.0 Ethernet controller: nVidia Corporation nForce Ethernet Controller (rev c2)
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev c2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce AC'97 Audio Controller (rev c2)
00:08.0 PCI bridge: nVidia Corporation nForce PCI-to-PCI bridge (rev c2)
00:09.0 IDE interface: nVidia Corporation nForce IDE (rev c3)
00:1e.0 PCI bridge: nVidia Corporation nForce AGP to PCI Bridge (rev b2)
02:00.0 VGA compatible controller: nVidia Corporation NVCrush11 [GeForce2 MX Integrated Graphics] (rev b1)

Voila ce que cette commande me donne sinon comme une Geforce 1 se me semble de mémoire ...

MarbolanGos · 22 oct. 2009

02:00.0 VGA compatible controller: nVidia Corporation NVCrush11 [GeForce2 MX Integrated Graphics] (rev b1)

C'est donc une GeForce2

Voila la carte donc il suffit de suivre la doc : http://doc.fedora-fr.org/wiki/Carte_graphique_NVIDIA_:_installation_des_pilotes#Pour_les_GeForce_s.C3.A9ries_2_.C3.A0_4

Et tout va rouler !

roublon · 22 oct. 2009

après exécution des commandes il m'annonce que tout est déjà disponible ...

le problème reste entier priori, puisque je n'ai toujours pas la possiblité de monter la résolution de mon ecran au dela des 1024*768, chose non réalisable car il m'est impossible de changer mon ecran qui apparait au systeme comme un CRT inconnus qui plus est ...

donc que faire ???

nouvo09 · 22 oct. 2009

D'accord et que raconte le fichier xorg.conf ?

Kaeguri · 22 oct. 2009

Je ne sais pas si cela peut aider, mais la "résolution" de mon problème c'est faite de manière plus que pragmatique.

1. J'ai lancé system-config-display ce qui a crée un xorg.conf
2. Je suis allé me balader dans Administration»Display»Hardware»Monitor et j'ai tenté de dire à F11 que j'avais tel moniteur (il propose un très large choix je pense que tu pourras trouver ton bonheur)
3. Ensuite je me suis battu dans Preferences»Display pour faire comprendre à F11 que l'écran "Unknown" trônant à côté de celui du "laptop" devait être mis en 1680x1050.

J'avoue avoir cliqué un peu comme un fou-fou, avoir eu quelques ratages mais au final vers le 3ème essai cela a marché.
Maintenant ma façon de faire n'est peut-être pas la meilleure (j'en veux pour preuve le "Kernel failure" auquel j'ai droit À CHAQUE FOIS que l'écran affiche 1680x1050 au démarrage).