Bonjour,
j'ai un serveur sous F11 qui faire faire office de partage audio (pulseaudio en serveur) et de serveur nfs
quand je redémarre celui ci pour lancer win XP (pour la création musical) j'ai gnome-panel sur mon laptop qui plante systématiquement
j'ai tenté (sur mon laptop) de remettre les paramettre defaut à pulse audio et de démonter mes partages NFS mais rien y fait il plante encore.
voici un extrait de mon messages
ug 6 09:56:04 neowdj-laptop pulseaudio[2230]: bluetooth-util.c: Error from ListAdapters reply: org.freedesktop.DBus.Error.ServiceUnknown
Aug 6 09:56:05 neowdj-laptop kernel: fuse init (API version 7.11)
Aug 6 09:56:07 neowdj-laptop pulseaudio[2289]: pid.c: Daemon already running.
Aug 6 09:56:32 neowdj-laptop kerneloops: Submitted 0 kernel oopses to www.kerneloops.org
Aug 6 09:56:51 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 09:56:55 neowdj-laptop kernel: rpcbind: server 192.168.10.187 not responding, timed out
Aug 6 09:57:11 neowdj-laptop pulseaudio[2520]: pid.c: Daemon already running.
Aug 6 09:58:51 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:00:51 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:02:51 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:04:51 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:06:52 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:08:52 neowdj-laptop sm-notify[1588]: DNS resolution of neowdj-laptop.local failed; retrying later
Aug 6 10:10:52 neowdj-laptop sm-notify[1588]: Unable to notify neowdj-laptop.local, giving up
Aug 6 10:10:52 neowdj-laptop Backgrounding to notify hosts...
Aug 6 10:22:09 neowdj-laptop dhclient: DHCPREQUEST on eth0 to 192.168.10.254 port 67
Aug 6 10:22:10 neowdj-laptop dhclient: DHCPACK from 192.168.10.254
Aug 6 10:22:10 neowdj-laptop dhclient: bound to 192.168.10.10 -- renewal in 1725 seconds.
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> DHCP: device eth0 state changed bound -> renew
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> address 192.168.10.10
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> prefix 24 (255.255.255.0)
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> gateway 192.168.10.254
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> nameserver '89.2.0.1'
Aug 6 10:22:10 neowdj-laptop NetworkManager: <info> nameserver '89.2.0.2'
Aug 6 10:50:55 neowdj-laptop dhclient: DHCPREQUEST on eth0 to 192.168.10.254 port 67
Aug 6 10:50:56 neowdj-laptop dhclient: DHCPACK from 192.168.10.254
Aug 6 10:50:56 neowdj-laptop dhclient: bound to 192.168.10.10 -- renewal in 1689 seconds.
Aug 6 11:19:05 neowdj-laptop dhclient: DHCPREQUEST on eth0 to 192.168.10.254 port 67
Aug 6 11:19:06 neowdj-laptop dhclient: DHCPACK from 192.168.10.254
Aug 6 11:19:06 neowdj-laptop dhclient: bound to 192.168.10.10 -- renewal in 1745 seconds.
Aug 6 11:24:08 neowdj-laptop kernel: __ratelimit: 32 callbacks suppressed
Aug 6 11:24:08 neowdj-laptop kernel: npviewer.bin[4077]: segfault at 0 ip (null) sp 00007fffa5872e48 error 14 in npviewer.bin[400000+1d000]
mon dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29.6-217.2.3.fc11.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Wed Jul 29 16:02:42 EDT 2009
Command line: ro root=UUID=29652231-86bb-4fb7-81af-57b424948bb1 rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
BIOS-e820: 00000000b7bbf000 - 00000000b7c86000 (usable)
BIOS-e820: 00000000b7c86000 - 00000000b7cbf000 (ACPI NVS)
BIOS-e820: 00000000b7cbf000 - 00000000b7ced000 (usable)
BIOS-e820: 00000000b7ced000 - 00000000b7cff000 (ACPI data)
BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0xb7d00 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4194176KB, range: 128KB, type WP
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 2944MB, range: 128MB, type UC
reg 4, base: 2942MB, range: 2MB, type UC
reg 5, base: 2941MB, range: 1MB, type UC
total RAM coverred: 2941M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 256M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2941MB, range: 1MB, type UC
reg 3, base: 2942MB, range: 2MB, type UC
reg 4, base: 2944MB, range: 128MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-00000000b7d00000
0000000000 - 00b7c00000 page 2M
00b7c00000 - 00b7d00000 page 4k
kernel direct mapping tables up to b7d00000 @ 8000-d000
last_map_addr: b7d00000 end: b7d00000
RAMDISK: 37cb3000 - 37fef040
ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
ACPI: XSDT B7CFE120, 0064 (r1 TOSINV TOSINV00 1 1000013)
ACPI: FACP B7CFD000, 00F4 (r4 TOSINV TOSINV00 1 MSFT 1000013)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT B7CF0000, 8F1A (r1 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: FACS B7C93000, 0040
ACPI: HPET B7CFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: APIC B7CFB000, 006C (r2 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: MCFG B7CFA000, 003C (r1 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: ASF! B7CF9000, 00A5 (r32 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: SLIC B7CEF000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: BOOT B7CEE000, 0028 (r1 TOSINV TOSINV00 1 MSFT 1000013)
ACPI: SSDT B7CED000, 0655 (r1 PmRef CpuPm 3000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-00000000b7d00000
Bootmem setup node 0 0000000000000000-00000000b7d00000
NODE_DATA [000000000000b000 - 000000000001ffff]
bootmap [0000000000020000 - 0000000000036f9f] pages 17
(6 early reservations) ==> bootmem [0000000000 - 00b7d00000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000ac910c] TEXT DATA BSS ==> [0000200000 - 0000ac910c]
#3 [0037cb3000 - 0037fef040] RAMDISK ==> [0037cb3000 - 0037fef040]
#4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
#5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000000 -> 0x0000009e
0: 0x00000100 -> 0x000b7b6c
0: 0x000b7bbf -> 0x000b7c86
0: 0x000b7cbf -> 0x000b7ced
0: 0x000b7cff -> 0x000b7d00
On node 0 totalpages: 752640
DMA zone: 56 pages used for memmap
DMA zone: 2353 pages reserved
DMA zone: 1589 pages, LIFO batch:0
DMA32 zone: 10238 pages used for memmap
DMA32 zone: 738404 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000b7b6c000 - 00000000b7bbf000
PM: Registered nosave memory: 00000000b7c86000 - 00000000b7cbf000
PM: Registered nosave memory: 00000000b7ced000 - 00000000b7cff000
Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 57344 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 739993
Policy zone: DMA32
Kernel command line: ro root=UUID=29652231-86bb-4fb7-81af-57b424948bb1 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 2161.129 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 30146560 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2925216k/3011584k available (3789k kernel code, 1024k absent, 85344k reserved, 2295k data, 1304k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.25 BogoMIPS (lpj=2161129)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18887 entries in 149 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4322.28 BogoMIPS (lpj=2161141)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8644.54 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5880 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1904 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 7:54:03 Date: 08/06/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
DMAR: Forcing write-buffer flush capability
pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
pci 0000:00:02.1: reg 10 64bit mmio: [0xd3500000-0xd35fffff]
pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6705c00-0xd6705fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6705800-0xd6705bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f]
pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107]
pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6705000-0xd67057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6706000-0xd67060ff]
pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xd0410000-0xd0410fff]
pci 0000:02:00.0: reg 20 64bit mmio: [0xd0400000-0xd040ffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xd5700000-0xd66fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd14fffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xd4600000-0xd460ffff]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xd4600000-0xd56fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1500000-0xd24fffff]
pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd3600000-0xd45fffff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd2500000-0xd34fffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Power Resource [FN00] (on)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x800-0x80f has been reserved
system 00:01: ioport range 0x810-0x817 has been reserved
system 00:01: ioport range 0x820-0x823 has been reserved
system 00:01: ioport range 0x400-0x47f has been reserved
system 00:01: ioport range 0x500-0x57f has been reserved
system 00:01: ioport range 0x580-0x5ff has been reserved
system 00:01: ioport range 0x600-0x627 has been reserved
system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x4fff
pci 0000:00:1c.0: MEM window: 0xd5700000-0xd66fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d14fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0x2000-0x2fff
pci 0000:00:1c.1: MEM window: 0xd4600000-0xd56fffff
pci 0000:00:1c.1: PREFETCH window: 0x000000d1500000-0x000000d24fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0x1000-0x1fff
pci 0000:00:1c.4: MEM window: 0xd3600000-0xd45fffff
pci 0000:00:1c.4: PREFETCH window: 0x000000d2500000-0x000000d34fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 17 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 16 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0000 -> 0003)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
pci_bus 0000:02: resource 1 mem: [0xd5700000-0xd66fffff]
pci_bus 0000:02: resource 2 mem: [0xd0400000-0xd14fffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xd4600000-0xd56fffff]
pci_bus 0000:03: resource 2 mem: [0xd1500000-0xd24fffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:06: resource 1 mem: [0xd3600000-0xd45fffff]
pci_bus 0000:06: resource 2 mem: [0xd2500000-0xd34fffff]
pci_bus 0000:06: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3312k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1249545243.014:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5719
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 24 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 25 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 26 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: SSDT B7B77C18, 026B (r1 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT B7B75598, 0537 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT B7B76E18, 01CF (r1 PmRef ApIst 3000 INTL 20051117)
ACPI: SSDT B7B77F18, 008D (r1 PmRef ApCst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Transitioning device [FAN] to D3
ACPI: Thermal Zone [THRM] (36 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 27 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705180 irq 27
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xd6705000 port 0xd6705300 irq 27
ata6: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 27
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS543232L9SA00, FB4OC43C, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: MATSHITADVD-RAM UJ880AS, 1.50, max UDMA/33
ata6.00: configured for UDMA/33
scsi 5:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880AS 1.50 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd6705c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
alloc irq_desc for 23 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd6705800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
alloc irq_desc for 18 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.29.6-217.2.3.fc11.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Marking TSC unstable due to TSC halts in idle
registered taskstats version 1
Magic number: 5:94:925
Initalizing network drop monitor service
Freeing unused kernel memory: 1304k freed
Write protecting the kernel read-only data: 1844k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Clocksource tsc unstable (delta = -108636771 ns)
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: New USB device found, idVendor=04f2, idProduct=b070
usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-2: Product: CNF7051
usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-2: SerialNumber: SN0001
usb 1-2: configuration #1 chosen from 1 choice
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 28 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
i915 0000:00:02.0: irq 28 for MSI/MSI-X
[drm] TV-12: set mode NTSC 480i 0
allocated 1280x800 fb: 0x08020000, bo ffff8800b4a59480
Console: switching to colour frame buffer device 160x50
[drm] LVDS-8: set mode 1280x800 14
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:04: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs: barriers enabled
kjournald2 starting: pid 78, dev sda2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
type=1404 audit(1249545262.966:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 127818 rules.
SELinux: 8192 avtab hash slots, 127818 rules.
SELinux: 8 users, 11 roles, 2751 types, 128 bools, 1 sens, 1024 cats
SELinux: 74 classes, 127818 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1249545263.238:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 141
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 29 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
r8169 0000:02:00.0: irq 29 for MSI/MSI-X
eth0: RTL8102e at 0xffffc200050b4000, 00:1e:33:b7:be:97, XID 34a00000 IRQ 29
cfg80211: Calling CRDA to update world regulatory domain
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: PC Speaker as /devices/platform/pcspkr/input/input8
iTCO_vendor_support: vendor-support=0
ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath5k 0000:03:00.0: setting latency timer to 64
ath5k 0000:03:00.0: registered as 'phy0'
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
wmaster0 (ath5k): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
alloc irq_desc for 22 on cpu 0 node 0
alloc kstat_irqs on cpu 0 node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3507: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3511: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3515: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3516: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3524: inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: FR
cfg80211: Regulatory domain changed to country: FR
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
device-mapper: multipath: version 1.0.5 loaded
EXT4 FS on sda2, internal journal on sda2:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
EXT4-fs: barriers enabled
kjournald2 starting: pid 1103, dev sda5:8, commit interval 5 seconds
EXT4 FS on sda5, internal journal on sda5:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda5 with ordered data mode
SELinux: initialized (dev sda5, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
swap_cgroup: uses 8192 bytes of vmalloc for pointer array space and 4194304 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 2097144k swap on /dev/sda3. Priority:-1 extents:1 across:2097144k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
platform microcode: firmware: requesting intel-ucode/06-0f-0d
platform microcode: firmware: requesting intel-ucode/06-0f-0d
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev proc, type proc), uses genfs_contexts
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
r8169: eth0: link up
r8169: eth0: link up
ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
audit(1249545297.622:26813): arch=c000003e syscall=2 success=no exit=-2 a0=1e94fc0 a1=0 a2=0 a3=310576920c items=1 ppid=1 pid=1913 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-settings-" exe="/usr/libexec/gnome-settings-daemon" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
audit(1249545297.622:26813): cwd="/"
audit(1249545297.622:26813): item=0 name="/usr/share/locale/fr_FR.UTF-8/LC_MESSAGES/GConf2.mo"
audit(1249545297.622:26813):
audit(1249545297.622:26814): arch=c000003e syscall=2 success=no exit=-2 a0=1e7cd90 a1=0 a2=0 a3=310576920c items=1 ppid=1 pid=1913 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-settings-" exe="/usr/libexec/gnome-settings-daemon" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
audit(1249545297.622:26814): cwd="/"
audit(1249545297.622:26814): item=0 name="/usr/share/locale/fr_FR.utf8/LC_MESSAGES/GConf2.mo"
audit(1249545297.622:26814):
audit(1249545297.622:26815): arch=c000003e syscall=2 success=no exit=-2 a0=1f14370 a1=0 a2=0 a3=310576920c items=1 ppid=1 pid=1913 auid=4294967295 uid=42 gid=42 euid=42 suid=42 fsuid=42 egid=42 sgid=42 fsgid=42 tty=(none) ses=4294967295 comm="gnome-settings-" exe="/usr/libexec/gnome-settings-daemon" subj=system_u:system_r:xdm_t:s0-s0:c0.c1023 key=(null)
audit(1249545297.622:26815): cwd="/"
virbr0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
eth0: no IPv6 routers present
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=046d, idProduct=c019
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Optical Mouse
usb 5-1: Manufacturer: Logitech
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
rpcbind: server 192.168.10.187 not responding, timed out
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
[drm] TV-12: set mode NTSC 480i 0
fuse init (API version 7.11)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
rpcbind: server 192.168.10.187 not responding, timed out
SELinux: initialized (dev 0:14, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
__ratelimit: 32 callbacks suppressed
npviewer.bin[4077]: segfault at 0 ip (null) sp 00007fffa5872e48 error 14 in npviewer.bin[400000+1d000]
si vous avez une idée
ps: 192.168.10.187 c'est mon serveur
mes 2 pc c'est F11 x86_64
