J'ai parlé un peu vite car un problème est venu en remplacer un autre.
Après avoir fait "startx", tout allait bien. Mais après avoir éteint et redémarré, ma résolution est passé en 1024x768 au lieu de 1280x1024. Nvidia-settings ne me propose pas ce dernier choix.
Voici mon xorg
Mais après les avoir supprimés, je vais me retrouver avec un écran noir non?
Après avoir fait "startx", tout allait bien. Mais après avoir éteint et redémarré, ma résolution est passé en 1024x768 au lieu de 1280x1024. Nvidia-settings ne me propose pas ce dernier choix.
Voici mon xorg
# Xorg configuration created by livna-config-display
Section "Files"
ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib64/xorg/modules"
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSectionX.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 x86_64
Current Operating System: Linux 85-169-226-165.rev.numericable.fr 2.6.29.6-213.fc11.x86_64 #1 SMP Tue Jul 7 21:02:57 EDT 2009 x86_64
Kernel command line: ro root=/dev/mapper/vg_85169226165-lv_root rhgb quiet
Build Date: 18 May 2009 02:47:15PM
Build ID: xorg-x11-server 1.6.1.901-1.fc11
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 18:45:34 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Videocard0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(**) ModulePath set to "/usr/lib64/xorg/modules/extensions/nvidia,/usr/lib64/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 1
(--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8600 GT rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions/nvidia//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.69.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
(--) NVIDIA(0): CRT-0
(--) NVIDIA(0): Philips FTV (DFP-1)
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Philips FTV (DFP-1): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Philips FTV (DFP-1): Internal Dual Link TMDS
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0): from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib64/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event3"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device USB Optical Mouse
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event5"
(II) USB Optical Mouse: Found 3 mouse buttons
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found scroll wheel(s)
(II) USB Optical Mouse: Configuring as mouse
(**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(**) USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) USB Optical Mouse: (accel) filter chain progression: 2.00
(**) USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) USB Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event4"
(II) USB-compliant keyboard: Found 10 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
(**) USB-compliant keyboard: (accel) filter chain progression: 2.00
(**) USB-compliant keyboard: (accel) filter stage 0: 20.00 ms
(**) USB-compliant keyboard: (accel) set acceleration profile 0
(II) config/hal: Adding input device Power Button (CM)
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event1"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event0"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) NVIDIA(0): Setting mode "640x480"
(II) NVIDIA(0): Setting mode "nvidia-auto-select"Mais après les avoir supprimés, je vais me retrouver avec un écran noir non?
