J'ai une config avec un P4 - XEON, j'utilises le noyau SMP mais j'ai un message "SMP Motherboard not detected".
Que faut-il faire dans ce cas là ?
Merci,
dmesg:
Linux version 2.6.6-1.435.2.1smp (
bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Wed Jun 30 15:54:05 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
BIOS-e820: 000000001ff00000 - 000000001ff80000 (usable)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: S3 and PAE do not like each other for now, S3 disabled.
NX (Execute Disable) protection: not present!
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 130944
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126848 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
Using APIC driver default
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb acpi=off
Found and enabled local APIC!
mapped 4G/4G trampoline to fffeb000.
Initializing CPU#0
CPU 0 irqstacks, hard=023b3000 soft=02393000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 3058.988 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 514276k/523776k available (1700k kernel code, 8672k reserved, 712k data, 184k init, 0k highmem)
Calibrating delay loop... 6029.31 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
per-CPU timeslice cutoff: 1463.18 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3057.0444 MHz.
..... host bus clock speed is 132.0932 MHz.
Brought up 1 CPUs
zapping low mappings.
CPU0: online
domain 0: span 00000001
groups: 00000001
domain 1: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 188k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd99d, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Using IRQ router SIS [1039/0963] at 0000:00:02.0
PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:02.1
PCI: Sharing IRQ 9 with 0000:00:02.3
PCI: IRQ 0 for device 0000:00:02.5 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:02.5
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1094062894.335:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Found IRQ 5 for device 0000:00:14.0
PCI: Sharing IRQ 5 with 0000:00:02.7
ttyS5 at I/O 0x1c08 (irq = 5) is a 16450
ttyS6 at I/O 0x1c10 (irq = 5) is a 8250
ttyS7 at I/O 0x1c18 (irq = 5) is a 16450
ttyS1 at I/O 0x1c20 (irq = 5) is a 8250
ttyS2 at I/O 0x1c28 (irq = 5) is a 8250
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
PCI: Found IRQ 9 for device 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800LB-07DNA2, ATA DISK drive
hdb: HDS722580VLAT20, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: hda1
hdb: max request size: 1024KiB
hdb: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: hdb1 < hdb5 > hdb2 hdb3 hdb4
hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 184k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 0230dea0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode
EXT3 FS on hdb3, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
dm@uk.sistina.com
cdrom: open failed.
cdrom: open failed.
Adding 1694848k swap on /dev/hdb4. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.13 <
tigran@veritas.com>
microcode: No new microdata for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
SCSI subsystem initialized
inserting floppy driver for 2.6.6-1.435.2.1smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ohci1394: $Rev: 1203 $ Ben Collins <
bcollins@debian.org>
PCI: Found IRQ 9 for device 0000:00:02.3
PCI: Sharing IRQ 9 with 0000:00:02.1
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e4000000-e40007ff] Max Packet=[2048]
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 9 for device 0000:00:06.0
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at 0x22842000, 00:30:05:55:19:9D, IRQ 9.
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4092 buckets, 32736 max) - 300 bytes per conntrack
Linux Tulip driver version 1.1.13 (May 11, 2002)
PCI: Found IRQ 9 for device 0000:00:06.0
tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at 0x22844000, 00:30:05:55:19:9D, IRQ 9.
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode
PCI: Found IRQ 5 for device 0000:00:02.7
PCI: Sharing IRQ 5 with 0000:00:14.0
codec_ready: codec is not ready [0x340000]
Intel ICH: probe of 0000:00:02.7 failed with error -5
