Salutche,
Bon, pour ton problème de son il y a pas mal de petits indices a relever.. La premiere chose serait de savoir si tu as effectué une mise a jour apres install de fedora.. Si oui, cela vien t peut etre du noyau en cours ( 2.6.27.159), du moins chez moi c'etait le cas avec ce dernier .. ( ce qui n'est pas le cas pour tout le monde a voir sur le forum 😉 )...

Si non, (pour l'update hein) il serait pas mal de la faire ( l'update toujours...) pour savoir si cette derniere resoudrait ton probleme et puis connaitre ta configuration materielle poourrait etre utile..

Dans un terminal, que renvoie la commande :

lspci

kikadisa a écrit

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)

J'ai le même chipset son sur mon toshiba et j'ai eu aussi un problème de son avec la rawhide (voir "ICI" )
J'avais aussi la commande aplay -l qui de donnai: no soundcards found
Essaye en root les commande suivante:

[root@localhost ~]# rmmod snd-hda-intel
[root@localhost ~]# modprobe snd-hda-intel probe_mask=0x1

Et refait un aplay -l pour voir si tu as quelque chose

Bonsoir,
réponse un peu tardive :
# rmmod snd-hda-intel
ERROR: Module snd_hda_intel does not exist in /proc/modules
[root@fedora10-jam ~]# modprobe snd-hda-intel probe_mask=0x1
[root@fedora10-jam ~]#
Cela ne me renvoie rien.

Sinon ma config :
# uname -r
2.6.27.19-170.2.35.fc10.ppc

# lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)

merci

D'après ton lspci tu n'as pas de carte son... C'est peut-être spécifique à apple et au kernel ppc, mais la je n'y connais pas grand chose.

Bonjour,

Je ne comprends pas j'en avais sous Mac OS ?!!
Deux questions me viennent :
1. c'est intégré à autre chose ?
2. Ce n'est pas reconnu et pris pour autre chose ?

juanalan

Pour compléter :

J'avais désinstallé les éléments alsa. Je les ai réinstallés hier soir et depuis message lors du boot : "usb 3-2:device not accepting, error-62"
Qu'est-ce que ça peut bien être ?
un rapport ?

Et toi Kikadisa, le rmmod devrait fonctionner, comment ça avance de ton côté ?

juanalan

Encore moi !

je regarde un peu artout et le kernel semble entrer en ligne de compte dans certains cas.
j'ai régulièrement un message envoyé à chaque démarrage.

Sinon essai (c'est long désolé)
$ modprobe snd-powermac
[jeanalain@fedora10-jam ~]$ dmesg
Using PowerMac machine description
Total memory = 768MB; using 2048kB for hash table (at cfe00000)
Initializing cgroup subsys cpu
Linux version 2.6.27.19-170.2.35.fc10.ppc (mockbuild@ppc10.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 Mon Feb 23 12:48:02 EST 2009
Found initrd at 0xc1300000:0xc172d800
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xff7c0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
Processor NAP mode on idle enabled.
PowerMac motherboard: Flat panel iMac
console [udbg0] enabled
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
PCI host bridge /pci@f0000000 ranges:
MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
PCI host bridge /pci@f2000000 (primary) ranges:
MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
PCI host bridge /pci@f4000000 ranges:
MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=1346, gen1=1345
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x30000000, Total RAM: 0x30000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0x00000000 -> 0x00030000
Normal 0x00030000 -> 0x00030000
HighMem 0x00030000 -> 0x00030000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00030000
On node 0 totalpages: 196608
free_area_init_node: node 0, pgdat c054a7b8, node_mem_map c05f5000
DMA zone: 195072 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072
Kernel command line: ro rhgb quiet root=/dev/VolGroup00/LogVol00
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 4096 (order: 12, 16384 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 41.600571 MHz
time_init: processor frequency = 1249.999995 MHz
clocksource: timebase mult[60270bf] shift[22] registered
clockevent: decrementer mult[aa6] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
High memory: 0k
Memory: 766336k/786432k available (5240k kernel code, 19720k reserved, 192k data, 571k bss, 284k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 82.94 BogoMIPS (lpj=41472)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
net_namespace: 832 bytes
NET: Registered protocol family 16
rstcr compatible register does not exist!
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
__ioremap(): phys addr 0x0 is RAM lr c04ef398
PCI: Probing PCI hardware
PCI: 0000:00:10.0 reg 10 32bit mmio: [91000000, 91ffffff]
PCI: 0000:00:10.0 reg 14 32bit mmio: [a0000000, a7ffffff]
PCI: 0000:00:10.0 reg 30 32bit mmio: [90000000, 9001ffff]
PCI: 0001:10:17.0 reg 10 32bit mmio: [80000000, 8007ffff]
PCI: 0001:10:18.0 reg 10 32bit mmio: [0, fff]
PCI: 0001:10:19.0 reg 10 32bit mmio: [0, fff]
PCI: 0001:10:1a.0 reg 10 32bit mmio: [80083000, 80083fff]
PCI: 0001:10:1b.0 reg 10 32bit mmio: [80082000, 80082fff]
pci 0001:10:1b.0: supports D1
pci 0001:10:1b.0: supports D2
pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.0: PME# disabled
PCI: 0001:10:1b.1 reg 10 32bit mmio: [80081000, 80081fff]
pci 0001:10:1b.1: supports D1
pci 0001:10:1b.1: supports D2
pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.1: PME# disabled
PCI: 0001:10:1b.2 reg 10 32bit mmio: [80080000, 800800ff]
pci 0001:10:1b.2: supports D1
pci 0001:10:1b.2: supports D2
pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:10:1b.2: PME# disabled
PCI: 0002:20:0d.0 reg 10 32bit mmio: [f5004000, f5007fff]
PCI: 0002:20:0e.0 reg 10 32bit mmio: [f5000000, f5000fff]
pci 0002:20:0e.0: supports D1
pci 0002:20:0e.0: supports D2
pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0002:20:0e.0: PME# disabled
PCI: 0002:20:0f.0 reg 10 32bit mmio: [f5200000, f53fffff]
PCI: 0002:20:0f.0 reg 30 32bit mmio: [f5100000, f51fffff]
bus: 00 index 0 io port: [802000, 1001fff]
bus: 00 index 1 mmio: [f1000000, f1ffffff]
bus: 00 index 2 mmio: [90000000, afffffff]
bus: 10 index 0 io port: [0, 7fffff]
bus: 10 index 1 mmio: [f3000000, f3ffffff]
bus: 10 index 2 mmio: [80000000, 8fffffff]
bus: 20 index 0 io port: [ff7fe000, ffffdfff]
bus: 20 index 1 mmio: [f5000000, f5ffffff]
Registering qe_ic with sysfs...
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
tracer: 772 pages allocated for 65536 entries of 48 bytes
actual entries 65620
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 4278k freed
Thermal assist unit not available
audit: initializing netlink socket (disabled)
type=2000 audit(1236327253.548:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1505
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:10.0: nv_msi_ht_cap_quirk didn't locate host bridge
nvidiafb: Device ID: 10de0329
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog not found
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
nvidiafb: Found OF EDID for head 1
nvidiafb: EDID found from BUS1
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: CRTC 0 is currently programmed for DFP
nvidiafb: Using DFP on CRTC 0
nvidiafb: Panel size is 1440 x 900
nvidiafb: Panel is TMDS
nvidia: Backlight initialized (nvidiabl0)
nvidiafb: Flat panel dithering enabled
Console: switching to colour frame buffer device 180x56
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA0000000)
Generic non-volatile memory driver v1.1
Linux agpgart interface v0.103
agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Serial: MPC52xx PSC UART driver
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation as /devices/virtual/input/input0
apm_emu: PMU APM Emulation initialized.
Uniform Multi-Platform E-IDE driver
ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
adb: starting probe task...
adb: finished probe task...
ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0xf1022000-0xf1022070,0xf1022160 on irq 39
ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
ide1 at 0xf101a000-0xf101a070,0xf101a160 on irq 24
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: [mac] hda1 hda2 hda3 hda4
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.ppc ehci_hcd
usb usb1: SerialNumber: 0001:10:1b.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.ppc ohci_hcd
usb usb2: SerialNumber: 0001:10:1a.0
ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.ppc ohci_hcd
usb usb3: SerialNumber: 0001:10:1b.0
ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: New USB device found, idVendor=07d1, idProduct=3c03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: 802.11 bg WLAN
usb 1-1: Manufacturer: Ralink
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.ppc ohci_hcd
usb usb4: SerialNumber: 0001:10:1b.1
USB Universal Host Controller Interface driver v3.0
mice: PS/2 mouse device common for all mice
platform ppc-rtc.0: rtc core: registered ppc_md as rtc0
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
PowerMac i2c bus uni-n 0 registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=08ec, idProduct=0008
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: DiskOnKey
usb 1-2: Manufacturer: Intuix
usb 1-2: SerialNumber: 0EE17850226379A9
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 3 ports detected
usb 3-2: New USB device found, idVendor=05ac, idProduct=1003
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Hub in Apple Extended USB Keyboard
usb 3-2: Manufacturer: Mitsumi Electric
usb 3-2.3: new full speed USB device using ohci_hcd and address 3
usb 3-2.3: configuration #1 chosen from 1 choice
usb 3-2.3: New USB device found, idVendor=05ac, idProduct=020c
usb 3-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-2.3: Product: Apple Extended USB Keyboard
usb 3-2.3: Manufacturer: Mitsumi Electric
usb 3-2.1: new low speed USB device using ohci_hcd and address 4
usb 3-2.1: configuration #1 chosen from 1 choice
usb 3-2.1: New USB device found, idVendor=046d, idProduct=c50e
usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2.1: Product: USB RECEIVER
usb 3-2.1: Manufacturer: Logitech
usbcore: registered new interface driver hiddev
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input1
input,hidraw0: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.3/3-2.3:1.1/input/input2
input,hidraw1: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:1b.0-2.3
input: Logitech USB RECEIVER as /devices/pci0001:10/0001:10:1b.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input3
input,hidraw2: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0001:10:1b.0-2.1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
input: PMU as /devices/virtual/input/input4
Freeing unused kernel memory: 284k init
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: dm-0: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 729102
EXT3-fs: dm-0: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1236327266.891:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 112415 rules.
SELinux: 8192 avtab hash slots, 112415 rules.
SELinux: 8 users, 11 roles, 2581 types, 121 bools, 1 sens, 1024 cats
SELinux: 73 classes, 112415 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1236327267.548:3): policy loaded auid=4294967295 ses=4294967295
udevd version 127 started
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:97:a4:ee
eth0: Found BCM5221 PHY
firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
phy0: Selected rate control algorithm 'pid'
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usbcore: registered new interface driver rt73usb
firewire_core: created device fw0: GUID 000a95fffe97a4ee, S400
device-mapper: multipath: version 1.0.5 loaded
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access Intuix DiskOnKey 1.02 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 2015232 512-byte hardware sectors (1032 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 2015232 512-byte hardware sectors (1032 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1572856k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1572856k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
ADDRCONF(NETDEV_UP): eth0: link is not ready
firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:17:33:91:7b:7c
wlan0: authenticated
wlan0: associate with AP 00:17:33:91:7b:7c
wlan0: RX AssocResp from 00:17:33:91:7b:7c (capab=0x401 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: disassociating by local choice (reason=3)
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev proc, type proc), uses genfs_contexts
Not cloning cgroup for unused subsystem ns
wlan0: no IPv6 routers present
virbr0: no IPv6 routers present
fuse init (API version 7.9)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
wlan0: authenticate with AP 00:14:a4:3b:65:d6
wlan0: authenticated
wlan0: associate with AP 00:14:a4:3b:65:d6
wlan0: RX AssocResp from 00:14:a4:3b:65:d6 (capab=0x411 status=0 aid=1)
wlan0: associated
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF: Mounting volume 'DVDVolume', timestamp 2036/02/07 02:58 (103c)
SELinux: initialized (dev hdc, type udf), uses genfs_contexts
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5

juanalan

Re,

Dans les logs, on observe des erreurs.

juanalan wrote:rstcr compatible register does not exist!
...
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog not found
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
i2c-adapter i2c-0: unable to read EDID block.
...
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
...
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
...
virbr0: starting userspace STP failed, starting kernel STP
SELinux: initialized (dev proc, type proc), uses genfs_contexts
Not cloning cgroup for unused subsystem ns
...

Il ya peut-être d'autres éléments mais là je suis totalement dépassé.
Si cela vous parle, merci de votre aide.

juanalan

Bonjour,

Toujours le même problème, mais je pense avoir un peu avancé.
Ayant des prolèmes de Kernel, j'ai récupéré la dernière version ppc sous koji et là beaucoup moins de messages d'erreur autour de mon kernel et surtout une indication : snd-aoa-i2c.
Mes pistes étaient de paramétrer quelquechose dufait que ma amchine est un Powermac --> donc snd-powermac; après lecture il semble que aoa soit l'élément plus récent et adapté.
Seulement je ne sais quel fichier modifier et où ?

[root@fedora10-jam ~]# ll /dev/snd/
total 0
crw-rw----+ 1 root root 116, 3 mars 8 15:55 seq
crw-rw----+ 1 root root 116, 2 mars 8 15:55 timer
[root@fedora10-jam ~]# lsmod
Module Size Used by
vfat 14392 1
fat 54024 1 vfat
fuse 60696 2
ipt_MASQUERADE 6168 1
iptable_nat 8812 1
nf_nat 19938 2 ipt_MASQUERADE,iptable_nat
bridge 54632 0
stp 5800 1 bridge
bnep 16876 2
sco 13888 2
l2cap 23924 3 bnep
bluetooth 57244 5 bnep,sco,l2cap
sunrpc 182196 1
ip6t_REJECT 7676 2
nf_conntrack_ipv6 17076 2
ip6table_filter 5824 1
ip6_tables 16392 1 ip6table_filter
ipv6 284812 24 ip6t_REJECT,nf_conntrack_ipv6
dm_multipath 19448 0
uinput 11684 0
arc4 5080 2
ecb 6364 2
firewire_ohci 27592 0
firewire_core 46156 1 firewire_ohci
sungem 32896 0
rt73usb 28352 0
rt2x00usb 13448 1 rt73usb
sungem_phy 14604 1 sungem
crc_itu_t 5152 2 firewire_core,rt73usb
rt2x00lib 43972 2 rt73usb,rt2x00usb
usb_storage 94492 1
rfkill 13796 2 rt2x00lib
mac80211 197092 2 rt2x00usb,rt2x00lib
cfg80211 42376 2 rt2x00lib,mac80211
snd_aoa_i2sbus 22648 0
snd_seq_dummy 6236 0
snd_seq_oss 40092 0
snd_seq_midi_event 9540 1 snd_seq_oss
snd_seq 63508 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10484 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 52264 0
snd_mixer_oss 20008 1 snd_pcm_oss
snd_pcm 79832 2 snd_aoa_i2sbus,snd_pcm_oss
snd_timer 24964 2 snd_seq,snd_pcm
snd_page_alloc 12020 1 snd_pcm
ide_cd_mod 33884 0
pmac_zilog 20776 0
snd 64560 9 snd_aoa_i2sbus,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9136 1 snd
snd_aoa_soundbus 8364 1 snd_aoa_i2sbus
ide_gd_mod 26372 3


A un moment, cela devient difficile !! je suis un peu perdu.

Merci de votre aide

Bonsoir,

que te donne [utilisateur@ordi ~]$ cat /proc/asound/card0/codec#* | grep Codec


azafranerodelsur

Salut

Merci pour ta réponse, je fais dans les prochaines minutes et te tiens au courant

juanalan

Voici le résultat :
$ cat /proc/asound/card0/codec#* | grep Codec
cat: /proc/asound/card0/codec#*: Aucun fichier ou dossier de ce type

juanalan

Bonsoir,

Pour installer le pilote alsa tu fais
$ ./configure --with-cards=hda-intel
$ make
# make install

azafranerodelsur

Salut azafranerodelsur

JE te rappelle que je suis en architecture PPC et donc je ne pense pas que hda-intel soit possible.
J'ai eu de l'aide un peu à droite à gauche et voici où j'en suis, cela te permettra de poursuivre mon assistance (merci encore pour tes conseils):
- il semble que le pilote snd_powermac (Powermac snapper) soit celui que je dois utiliser compte-tenu de ma machine.
- j'ai eu grâce à la manip "modprobe snd_powermac" un début d'éclatement de tympans.
Début car cela a duré 2 minutes alors que je tentais de régler le volume et warning :
'modprobe warning : /etc/modprobe.d/sound line 1 ignoring bad line starting with snd-aoa'

- il est instable : au reboot, doit être systématiquement rechargé ;
- j'ai des sautes de connexion, crachotement, etc. donc pas nickel pour le moment.

Voilà, je ne sais si tu peux m'aider plus avant, mais si possible, je reste preneur et sur la bonne voie !

Juanalan
-
-

Bonjour

Copie cela en console en utilisateur $
cat /proc/asound/card0/codec#* | grep Codec
tu dois avoir 2 codecs et ce sera une piste pour la réponse
Par ailleurs ton Mac est-il avec une puce intel ?

Cordialement