la commande smartctl me donne :
[tsouliang@localhost ~]$ smartctl --all /dev/sda
smartctl version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Smartctl open device: /dev/sda failed: Permission denied
[tsouliang@localhost ~]$ su -
Mot de passe :
[root@localhost ~]# smartctl --all /dev/sda
smartctl version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate U Series 6 family
Device Model: ST340810A
Serial Number: 6FB0VEXW
Firmware Version: 3.34
User Capacity: 40 020 664 320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Dec 7 17:09:42 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 420) seconds.
Offline data collection
capabilities: (0x1d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 42) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 060 056 025 Pre-fail Always - 120010023
3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 5
5 Reallocated_Sector_Ct 0x0033 094 094 036 Pre-fail Always - 70
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 85070548
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2888
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1363
194 Temperature_Celsius 0x0022 028 052 000 Old_age Always - 28
195 Hardware_ECC_Recovered 0x001a 100 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 80 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 80 occurred at disk power-on lifetime: 2787 hours (116 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 3e 0b e5 02 e1 Error: UNC 62 sectors at LBA = 0x0102e50b = 16966923
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 01 e5 02 e1 00 00:00:00.314 READ DMA
f8 00 48 00 00 00 e0 00 00:00:00.089 READ NATIVE MAX ADDRESS
ec 00 48 00 00 00 a0 02 00:00:01.308 IDENTIFY DEVICE
ef 03 48 00 00 00 a0 02 00:00:03.078 SET FEATURES [Set transfer mode]
f8 00 48 00 00 00 e0 00 00:00:00.116 READ NATIVE MAX ADDRESS
Error 79 occurred at disk power-on lifetime: 2787 hours (116 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 3e 0b e5 02 e1 Error: UNC 62 sectors at LBA = 0x0102e50b = 16966923
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 01 e5 02 e1 00 00:00:00.991 READ DMA
f8 00 48 00 00 00 e0 00 00:00:00.116 READ NATIVE MAX ADDRESS
ec 00 48 00 00 00 a0 02 00:00:01.303 IDENTIFY DEVICE
ef 03 48 00 00 00 a0 02 00:00:03.080 SET FEATURES [Set transfer mode]
f8 00 48 00 00 00 e0 00 00:00:00.116 READ NATIVE MAX ADDRESS
Error 78 occurred at disk power-on lifetime: 2787 hours (116 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 3e 0b e5 02 e1 Error: UNC 62 sectors at LBA = 0x0102e50b = 16966923
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 01 e5 02 e1 00 00:00:00.049 READ DMA
c8 00 b8 41 e4 02 e1 00 00:00:01.216 READ DMA
ca 00 08 01 51 07 e0 00 00:00:00.206 WRITE DMA
ca 00 10 f1 50 07 e0 00 00:00:00.236 WRITE DMA
ca 00 20 e9 ef 05 e1 00 00:00:00.335 WRITE DMA
Error 77 occurred at disk power-on lifetime: 2694 hours (112 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 64 45 5f e0 Error: UNC 3 sectors at LBA = 0x005f4564 = 6243684
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 45 5f e0 00 00:00:01.340 READ DMA
c8 00 08 57 45 5f e0 00 00:00:00.122 READ DMA
c8 00 08 4f 45 5f e0 00 00:00:00.122 READ DMA
c8 00 08 47 45 5f e0 00 00:00:00.122 READ DMA
c8 00 08 3f 45 5f e0 00 00:00:00.111 READ DMA
Error 76 occurred at disk power-on lifetime: 2694 hours (112 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 2b 64 45 5f e0 Error: UNC 43 sectors at LBA = 0x005f4564 = 6243684
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 0f 45 5f e0 00 00:00:00.080 READ DMA
c8 00 80 8f 44 5f e0 00 00:00:01.607 READ DMA
c8 00 80 0f 44 5f e0 00 00:00:01.579 READ DMA
c8 00 80 8f 43 5f e0 00 00:00:01.613 READ DMA
c8 00 80 0f 43 5f e0 00 00:00:01.608 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
voila ... alors qu'est ce que ça dit ?
parceque moi je vois juste que ça fonctionne mais qu'il y a de erreurs ... :-P
bon enfin de toute manière je compte bien upgrader le HW bientôt ... merci à tous !! :-D
