Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

Ma machine s'éteint toute seule !

jettero

Bonjour,

Depuis quelques jours, ma machine un IBM Thinkpad xs 60, s'éteint toute seule. Je la démarre et après 10-15 min elle s'éteint. Je pensais que c'était un processus planté qui faisait mouliner et chauffer la bécane et que par sécurité cette dernière s'éteignait. Mais en fait j'en sais trop rien.

Là j'écris de Windows et ça plante pas, c'est donc mon install linux. Mais où chercher ?

Jet

pmarion

Dans
/var/log/messages
Tu dois trouver les messages de boot et donc dans les lignes qui précèdent chaque boot il y aura (peut-être) un ou plusieurs messages pour indiquer une cause.

Marcet

Si la machine se met à chauffer, tu dois entendre le ventilateur tourner à son maximum avant que ça s'éteigne ?

jettero

Oui en effet. J'avais ouvert une session VirtualBox et je me suis demandé si c'était ça. Mais quand ça s'est planté la session était close.

Mystère...

Voici le log :

Sep 23 10:28:29 voyager3 kernel: imklog 3.18.1, log source = /proc/kmsg started.
Sep 23 10:28:29 voyager3 kernel: Initializing cgroup subsys cpuset
Sep 23 10:28:29 voyager3 kernel: Linux version 2.6.25.14-108.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 14:08:11 EDT 2008
Sep 23 10:28:29 voyager3 kernel: BIOS-provided physical RAM map:
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 000000003f6d0000 - 000000003f6e3000 (ACPI data)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 000000003f6e3000 - 000000003f700000 (ACPI NVS)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 23 10:28:29 voyager3 kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Sep 23 10:28:29 voyager3 kernel: 118MB HIGHMEM available.
Sep 23 10:28:29 voyager3 kernel: 896MB LOWMEM available.
Sep 23 10:28:29 voyager3 kernel: Scan SMP from c0000000 for 1024 bytes.
Sep 23 10:28:29 voyager3 kernel: Scan SMP from c009fc00 for 1024 bytes.
Sep 23 10:28:29 voyager3 kernel: Scan SMP from c00f0000 for 65536 bytes.
Sep 23 10:28:29 voyager3 kernel: found SMP MP-table at [c00f6900] 000f6900
Sep 23 10:28:29 voyager3 kernel: Using x86 segment limits to approximate NX protection
Sep 23 10:28:29 voyager3 kernel: Zone PFN ranges:
Sep 23 10:28:29 voyager3 kernel:  DMA             0 ->     4096
Sep 23 10:28:29 voyager3 kernel:  Normal       4096 ->   229376
Sep 23 10:28:29 voyager3 kernel:  HighMem    229376 ->   259792
Sep 23 10:28:29 voyager3 kernel: Movable zone start PFN for each node
Sep 23 10:28:29 voyager3 kernel: early_node_map[1] active PFN ranges
Sep 23 10:28:29 voyager3 kernel:    0:        0 ->   259792
Sep 23 10:28:29 voyager3 kernel: DMI present.
Sep 23 10:28:29 voyager3 kernel: Using APIC driver default
Sep 23 10:28:29 voyager3 kernel: ACPI: RSDP 000F68C0, 0024 (r2 LENOVO)
Sep 23 10:28:29 voyager3 kernel: ACPI: XSDT 3F6D6621, 0074 (r1 LENOVO TP-7B        1030  LTP        0)
Sep 23 10:28:29 voyager3 kernel: ACPI: FACP 3F6D6700, 00F4 (r3 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
Sep 23 10:28:29 voyager3 kernel: ACPI: DSDT 3F6D68E7, C463 (r1 LENOVO TP-7B        1030 MSFT  100000E)
Sep 23 10:28:29 voyager3 kernel: ACPI: FACS 3F6F4000, 0040
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D68B4, 0033 (r1 LENOVO TP-7B        1030 MSFT  100000E)
Sep 23 10:28:29 voyager3 kernel: ACPI: ECDT 3F6E2D4A, 0052 (r1 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: TCPA 3F6E2D9C, 0032 (r2 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: APIC 3F6E2DCE, 0068 (r1 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: MCFG 3F6E2E36, 003E (r1 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: HPET 3F6E2E74, 0038 (r1 LENOVO TP-7B        1030 LNVO        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: BOOT 3F6E2FD8, 0028 (r1 LENOVO TP-7B        1030  LTP        1)
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D5BDC, 0507 (r1 LENOVO TP-7B        1030 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D5A04, 01D8 (r1 LENOVO TP-7B        1030 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: PM-Timer IO Port: 0x1008
Sep 23 10:28:29 voyager3 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 23 10:28:29 voyager3 kernel: Processor #0 6:14 APIC version 20
Sep 23 10:28:29 voyager3 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 23 10:28:29 voyager3 kernel: Processor #1 6:14 APIC version 20
Sep 23 10:28:29 voyager3 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 23 10:28:29 voyager3 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep 23 10:28:29 voyager3 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Sep 23 10:28:29 voyager3 kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Sep 23 10:28:29 voyager3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 23 10:28:29 voyager3 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 23 10:28:29 voyager3 kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Sep 23 10:28:29 voyager3 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep 23 10:28:29 voyager3 kernel: Using ACPI (MADT) for SMP configuration information
Sep 23 10:28:29 voyager3 kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
Sep 23 10:28:29 voyager3 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 23 10:28:29 voyager3 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
Sep 23 10:28:29 voyager3 kernel: PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
Sep 23 10:28:29 voyager3 kernel: PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
Sep 23 10:28:29 voyager3 kernel: PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Sep 23 10:28:29 voyager3 rsyslogd: [origin software="rsyslogd" swVersion="3.18.1" x-pid="2020" x-info="http://www.rsyslog.com"] restart
Sep 23 10:28:29 voyager3 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257763
Sep 23 10:28:29 voyager3 kernel: Kernel command line: ro root=UUID=f6e4ed78-febf-458a-af08-dfe6b158cb22 rhgb quiet
Sep 23 10:28:29 voyager3 kernel: Enabling fast FPU save and restore... done.
Sep 23 10:28:29 voyager3 kernel: Enabling unmasked SIMD FPU exception support... done.
Sep 23 10:28:29 voyager3 kernel: Initializing CPU#0
Sep 23 10:28:29 voyager3 kernel: CPU 0 irqstacks, hard=c07b4000 soft=c0794000
Sep 23 10:28:29 voyager3 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Sep 23 10:28:29 voyager3 kernel: Detected 1662.564 MHz processor.
Sep 23 10:28:29 voyager3 kernel: Console: colour VGA+ 80x25
Sep 23 10:28:29 voyager3 kernel: console [tty0] enabled
Sep 23 10:28:29 voyager3 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 23 10:28:29 voyager3 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 23 10:28:29 voyager3 kernel: Memory: 1022284k/1039168k available (2220k kernel code, 16176k reserved, 1117k data, 284k init, 121664k highmem)
Sep 23 10:28:29 voyager3 kernel: virtual kernel memory layout:
Sep 23 10:28:29 voyager3 kernel:    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
Sep 23 10:28:29 voyager3 kernel:    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
Sep 23 10:28:29 voyager3 kernel:    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
Sep 23 10:28:29 voyager3 kernel:    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Sep 23 10:28:29 voyager3 kernel:      .init : 0xc074a000 - 0xc0791000   ( 284 kB)
Sep 23 10:28:29 voyager3 kernel:      .data : 0xc062b2d5 - 0xc0742800   (1117 kB)
Sep 23 10:28:29 voyager3 kernel:      .text : 0xc0400000 - 0xc062b2d5   (2220 kB)
Sep 23 10:28:29 voyager3 kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Sep 23 10:28:29 voyager3 kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Sep 23 10:28:29 voyager3 kernel: Calibrating delay using timer specific routine.. 3328.30 BogoMIPS (lpj=1664153)
Sep 23 10:28:29 voyager3 kernel: Security Framework initialized
Sep 23 10:28:29 voyager3 kernel: SELinux:  Initializing.
Sep 23 10:28:29 voyager3 kernel: selinux_register_security:  Registering secondary module capability
Sep 23 10:28:29 voyager3 kernel: Capability LSM initialized as secondary
Sep 23 10:28:29 voyager3 kernel: Mount-cache hash table entries: 512
Sep 23 10:28:29 voyager3 kernel: Initializing cgroup subsys ns
Sep 23 10:28:29 voyager3 kernel: Initializing cgroup subsys cpuacct
Sep 23 10:28:29 voyager3 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 23 10:28:29 voyager3 kernel: CPU: L2 cache: 2048K
Sep 23 10:28:29 voyager3 kernel: CPU: Physical Processor ID: 0
Sep 23 10:28:29 voyager3 kernel: CPU: Processor Core ID: 0
Sep 23 10:28:29 voyager3 kernel: Intel machine check architecture supported.
Sep 23 10:28:29 voyager3 kernel: Intel machine check reporting enabled on CPU#0.
Sep 23 10:28:29 voyager3 kernel: using mwait in idle threads.
Sep 23 10:28:29 voyager3 kernel: Compat vDSO mapped to ffffe000.
Sep 23 10:28:29 voyager3 kernel: Checking 'hlt' instruction... OK.
Sep 23 10:28:29 voyager3 kernel: ACPI: Core revision 20070126
Sep 23 10:28:29 voyager3 kernel: CPU0: Intel Genuine Intel(R) CPU           L2400  @ 1.66GHz stepping 08
Sep 23 10:28:29 voyager3 kernel: Booting processor 1/1 ip 4000
Sep 23 10:28:29 voyager3 kernel: CPU 1 irqstacks, hard=c07b5000 soft=c0795000
Sep 23 10:28:29 voyager3 kernel: Initializing CPU#1
Sep 23 10:28:29 voyager3 kernel: Calibrating delay using timer specific routine.. 3325.03 BogoMIPS (lpj=1662517)
Sep 23 10:28:29 voyager3 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 23 10:28:29 voyager3 kernel: CPU: L2 cache: 2048K
Sep 23 10:28:29 voyager3 kernel: CPU: Physical Processor ID: 0
Sep 23 10:28:29 voyager3 kernel: CPU: Processor Core ID: 1
Sep 23 10:28:29 voyager3 kernel: Intel machine check architecture supported.
Sep 23 10:28:29 voyager3 kernel: Intel machine check reporting enabled on CPU#1.
Sep 23 10:28:29 voyager3 kernel: CPU1: Intel Genuine Intel(R) CPU           L2400  @ 1.66GHz stepping 08
Sep 23 10:28:29 voyager3 kernel: Total of 2 processors activated (6653.34 BogoMIPS).
Sep 23 10:28:29 voyager3 kernel: ENABLING IO-APIC IRQs
Sep 23 10:28:29 voyager3 kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 23 10:28:29 voyager3 kernel: checking TSC synchronization [CPU#0 -> CPU#1]:
Sep 23 10:28:29 voyager3 kernel: Measured 571260 cycles TSC warp between CPUs, turning off TSC clock.
Sep 23 10:28:29 voyager3 kernel: Marking TSC unstable due to: check_tsc_sync_source failed.
Sep 23 10:28:29 voyager3 kernel: Brought up 2 CPUs
Sep 23 10:28:29 voyager3 kernel: net_namespace: 548 bytes
Sep 23 10:28:29 voyager3 kernel: Booting paravirtualized kernel on bare hardware
Sep 23 10:28:29 voyager3 kernel: Time: 10:27:57  Date: 09/23/08
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 16
Sep 23 10:28:29 voyager3 kernel: ACPI: ACPI Dock Station Driver 
Sep 23 10:28:29 voyager3 kernel: ACPI: bus type pci registered
Sep 23 10:28:29 voyager3 kernel: PCI: Using MMCONFIG for extended config space
Sep 23 10:28:29 voyager3 kernel: PCI: Using configuration type 1
Sep 23 10:28:29 voyager3 kernel: Setting up standard PCI resources
Sep 23 10:28:29 voyager3 kernel: ACPI: EC: EC description table is found, configuring boot EC
Sep 23 10:28:29 voyager3 kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Sep 23 10:28:29 voyager3 kernel: ACPI: Interpreter enabled
Sep 23 10:28:29 voyager3 kernel: ACPI: (supports S0 S3 S4 S5)
Sep 23 10:28:29 voyager3 kernel: ACPI: Using IOAPIC for interrupt routing
Sep 23 10:28:29 voyager3 kernel: ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Sep 23 10:28:29 voyager3 kernel: ACPI: EC: driver started in poll mode
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 23 10:28:29 voyager3 kernel: pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Sep 23 10:28:29 voyager3 kernel: pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Sep 23 10:28:29 voyager3 kernel: PCI: Transparent bridge - 0000:00:1e.0
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Sep 23 10:28:29 voyager3 kernel: ACPI: EC: non-query interrupt received, switching to interrupt mode
Sep 23 10:28:29 voyager3 kernel: ACPI: Power Resource [PUBS] (on)
Sep 23 10:28:29 voyager3 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 23 10:28:29 voyager3 kernel: pnp: PnP ACPI init
Sep 23 10:28:29 voyager3 kernel: ACPI: bus type pnp registered
Sep 23 10:28:29 voyager3 kernel: pnp: PnP ACPI: found 14 devices
Sep 23 10:28:29 voyager3 kernel: ACPI: ACPI bus type pnp unregistered
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver usbfs
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver hub
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new device driver usb
Sep 23 10:28:29 voyager3 kernel: PCI: Using ACPI for IRQ routing
Sep 23 10:28:29 voyager3 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Sep 23 10:28:29 voyager3 kernel: NetLabel: Initializing
Sep 23 10:28:29 voyager3 kernel: NetLabel:  domain hash size = 128
Sep 23 10:28:29 voyager3 kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Sep 23 10:28:29 voyager3 kernel: NetLabel:  unlabeled traffic allowed by default
Sep 23 10:28:29 voyager3 kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Sep 23 10:28:29 voyager3 kernel: hpet0: 3 64-bit timers, 14318180 Hz
Sep 23 10:28:29 voyager3 kernel: ACPI: RTC can wake from S4
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0x0-0x9ffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xc8000-0xcbfff has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xcc000-0xcffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0x0-0x0 could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0x0-0x0 could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xdc000-0xdffff has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xe8000-0xebfff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xec000-0xeffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x164e-0x164f has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x1000-0x107f has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x1180-0x11bf has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x800-0x80f has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x15e0-0x15ef has been reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: ioport range 0x1600-0x165f could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
Sep 23 10:28:29 voyager3 kernel: PCI: Bridge: 0000:00:1c.0
Sep 23 10:28:29 voyager3 kernel:  IO window: 2000-2fff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0xee000000-0xee0fffff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: disabled.
Sep 23 10:28:29 voyager3 kernel: PCI: Bridge: 0000:00:1c.1
Sep 23 10:28:29 voyager3 kernel:  IO window: 3000-4fff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0xec000000-0xedffffff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: 0x00000000e4000000-0x00000000e40fffff
Sep 23 10:28:29 voyager3 kernel: PCI: Bridge: 0000:00:1c.2
Sep 23 10:28:29 voyager3 kernel:  IO window: 5000-6fff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0xe8000000-0xe9ffffff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: 0x00000000e4100000-0x00000000e41fffff
Sep 23 10:28:29 voyager3 kernel: PCI: Bridge: 0000:00:1c.3
Sep 23 10:28:29 voyager3 kernel:  IO window: 7000-8fff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0xea000000-0xebffffff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: 0x00000000e4200000-0x00000000e42fffff
Sep 23 10:28:29 voyager3 kernel: PCI: Bus 22, cardbus bridge: 0000:15:00.0
Sep 23 10:28:29 voyager3 kernel:  IO window: 0x00009000-0x000090ff
Sep 23 10:28:29 voyager3 kernel:  IO window: 0x00009400-0x000094ff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: 0xe0000000-0xe3ffffff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0x50000000-0x53ffffff
Sep 23 10:28:29 voyager3 kernel: PCI: Bridge: 0000:00:1e.0
Sep 23 10:28:29 voyager3 kernel:  IO window: 9000-cfff
Sep 23 10:28:29 voyager3 kernel:  MEM window: 0xe4300000-0xe7ffffff
Sep 23 10:28:29 voyager3 kernel:  PREFETCH window: 0x00000000e0000000-0x00000000e3ffffff
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
Sep 23 10:28:29 voyager3 kernel: PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 2
Sep 23 10:28:29 voyager3 kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep 23 10:28:29 voyager3 kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 23 10:28:29 voyager3 kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep 23 10:28:29 voyager3 kernel: TCP: Hash tables configured (established 131072 bind 65536)
Sep 23 10:28:29 voyager3 kernel: TCP reno registered
Sep 23 10:28:29 voyager3 kernel: checking if image is initramfs... it is
Sep 23 10:28:29 voyager3 kernel: Freeing initrd memory: 2651k freed
Sep 23 10:28:29 voyager3 kernel: Simple Boot Flag at 0x35 set to 0x1
Sep 23 10:28:29 voyager3 kernel: apm: BIOS not found.
Sep 23 10:28:29 voyager3 kernel: audit: initializing netlink socket (disabled)
Sep 23 10:28:29 voyager3 kernel: type=2000 audit(1222165677.528:1): initialized
Sep 23 10:28:29 voyager3 kernel: highmem bounce pool size: 64 pages
Sep 23 10:28:29 voyager3 kernel: Total HugeTLB memory allocated, 0
Sep 23 10:28:29 voyager3 kernel: VFS: Disk quotas dquot_6.5.1
Sep 23 10:28:29 voyager3 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep 23 10:28:29 voyager3 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sep 23 10:28:29 voyager3 kernel: io scheduler noop registered
Sep 23 10:28:29 voyager3 kernel: io scheduler anticipatory registered
Sep 23 10:28:29 voyager3 kernel: io scheduler deadline registered
Sep 23 10:28:29 voyager3 kernel: io scheduler cfq registered (default)
Sep 23 10:28:29 voyager3 kernel: assign_interrupt_mode Found MSI capability
Sep 23 10:28:29 voyager3 kernel: assign_interrupt_mode Found MSI capability
Sep 23 10:28:29 voyager3 kernel: assign_interrupt_mode Found MSI capability
Sep 23 10:28:29 voyager3 kernel: assign_interrupt_mode Found MSI capability
Sep 23 10:28:29 voyager3 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D63A0, 01ED (r1  PmRef  Cpu0Ist      100 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D60E3, 0238 (r1  PmRef  Cpu0Cst      100 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Sep 23 10:28:29 voyager3 kernel: ACPI: ACPI0007:00 is registered as cooling_device0
Sep 23 10:28:29 voyager3 kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D658D, 0094 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: SSDT 3F6D631B, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
Sep 23 10:28:29 voyager3 kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Sep 23 10:28:29 voyager3 kernel: ACPI: ACPI0007:01 is registered as cooling_device1
Sep 23 10:28:29 voyager3 kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Sep 23 10:28:29 voyager3 kernel: ACPI: LNXTHERM:01 is registered as thermal_zone0
Sep 23 10:28:29 voyager3 kernel: ACPI: Thermal Zone [THM0] (63 C)
Sep 23 10:28:29 voyager3 kernel: ACPI: LNXTHERM:02 is registered as thermal_zone1
Sep 23 10:28:29 voyager3 kernel: ACPI: Thermal Zone [THM1] (65 C)
Sep 23 10:28:29 voyager3 kernel: isapnp: Scanning for PnP cards...
Sep 23 10:28:29 voyager3 kernel: isapnp: No Plug & Play device found
Sep 23 10:28:29 voyager3 kernel: Non-volatile memory driver v1.2
Sep 23 10:28:29 voyager3 kernel: Linux agpgart interface v0.103
Sep 23 10:28:29 voyager3 kernel: agpgart: Detected an Intel 945GM Chipset.
Sep 23 10:28:29 voyager3 kernel: agpgart: Detected 7932K stolen memory.
Sep 23 10:28:29 voyager3 kernel: agpgart: AGP aperture is 256M @ 0xd0000000
Sep 23 10:28:29 voyager3 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 23 10:28:29 voyager3 kernel: serial 00:0a: activated
Sep 23 10:28:29 voyager3 kernel: 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 23 10:28:29 voyager3 kernel: brd: module loaded
Sep 23 10:28:29 voyager3 kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Sep 23 10:28:29 voyager3 kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Sep 23 10:28:29 voyager3 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 23 10:28:29 voyager3 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 23 10:28:29 voyager3 kernel: mice: PS/2 mouse device common for all mice
Sep 23 10:28:29 voyager3 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Sep 23 10:28:29 voyager3 kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Sep 23 10:28:29 voyager3 kernel: rtc0: alarms up to one month, y3k
Sep 23 10:28:29 voyager3 kernel: cpuidle: using governor ladder
Sep 23 10:28:29 voyager3 kernel: cpuidle: using governor menu
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver hiddev
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver usbhid
Sep 23 10:28:29 voyager3 kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Sep 23 10:28:29 voyager3 kernel: TCP cubic registered
Sep 23 10:28:29 voyager3 kernel: Initializing XFRM netlink socket
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 1
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 17
Sep 23 10:28:29 voyager3 kernel: Using IPI No-Shortcut mode
Sep 23 10:28:29 voyager3 kernel: registered taskstats version 1
Sep 23 10:28:29 voyager3 kernel:  Magic number: 8:731:477
Sep 23 10:28:29 voyager3 kernel: Freeing unused kernel memory: 284k freed
Sep 23 10:28:29 voyager3 kernel: Write protecting the kernel read-only data: 904k
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
Sep 23 10:28:29 voyager3 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Sep 23 10:28:29 voyager3 kernel: ehci_hcd 0000:00:1d.7: debug port 1
Sep 23 10:28:29 voyager3 kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
Sep 23 10:28:29 voyager3 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 23 10:28:29 voyager3 kernel: usb usb1: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 1-0:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 1-0:1.0: 8 ports detected
Sep 23 10:28:29 voyager3 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sep 23 10:28:29 voyager3 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 23 10:28:29 voyager3 kernel: usb usb1: Product: EHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.i686 ehci_hcd
Sep 23 10:28:29 voyager3 kernel: usb usb1: SerialNumber: 0000:00:1d.7
Sep 23 10:28:29 voyager3 kernel: USB Universal Host Controller Interface driver v3.0
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
Sep 23 10:28:29 voyager3 kernel: usb usb2: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 2-0:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 2-0:1.0: 2 ports detected
Sep 23 10:28:29 voyager3 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Sep 23 10:28:29 voyager3 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 23 10:28:29 voyager3 kernel: usb usb2: Product: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
Sep 23 10:28:29 voyager3 kernel: usb usb2: SerialNumber: 0000:00:1d.0
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
Sep 23 10:28:29 voyager3 kernel: usb usb3: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 3-0:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 3-0:1.0: 2 ports detected
Sep 23 10:28:29 voyager3 kernel: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Sep 23 10:28:29 voyager3 kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
Sep 23 10:28:29 voyager3 kernel: usb 1-6: new high speed USB device using ehci_hcd and address 2
Sep 23 10:28:29 voyager3 kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Sep 23 10:28:29 voyager3 kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 23 10:28:29 voyager3 kernel: usb usb3: Product: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
Sep 23 10:28:29 voyager3 kernel: usb usb3: SerialNumber: 0000:00:1d.1
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
Sep 23 10:28:29 voyager3 kernel: usb usb4: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 4-0:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 4-0:1.0: 2 ports detected
Sep 23 10:28:29 voyager3 kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Sep 23 10:28:29 voyager3 kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 23 10:28:29 voyager3 kernel: usb usb4: Product: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
Sep 23 10:28:29 voyager3 kernel: usb usb4: SerialNumber: 0000:00:1d.2
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Sep 23 10:28:29 voyager3 kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
Sep 23 10:28:29 voyager3 kernel: usb usb5: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 5-0:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 5-0:1.0: 2 ports detected
Sep 23 10:28:29 voyager3 kernel: usb 1-6: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: hub 1-6:1.0: USB hub found
Sep 23 10:28:29 voyager3 kernel: hub 1-6:1.0: 4 ports detected
Sep 23 10:28:29 voyager3 kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Sep 23 10:28:29 voyager3 kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 23 10:28:29 voyager3 kernel: usb usb5: Product: UHCI Host Controller
Sep 23 10:28:29 voyager3 kernel: usb usb5: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
Sep 23 10:28:29 voyager3 kernel: usb usb5: SerialNumber: 0000:00:1d.3
Sep 23 10:28:29 voyager3 kernel: usb 1-6: New USB device found, idVendor=17ef, idProduct=1000
Sep 23 10:28:29 voyager3 kernel: usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 23 10:28:29 voyager3 kernel: SCSI subsystem initialized
Sep 23 10:28:29 voyager3 kernel: Driver 'sd' needs updating - please use bus_type methods
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: hub 1-0:1.0: unable to enumerate USB device on port 7
Sep 23 10:28:29 voyager3 kernel: hub 1-0:1.0: unable to enumerate USB device on port 8
Sep 23 10:28:29 voyager3 kernel: usb 5-1: new full speed USB device using uhci_hcd and address 2
Sep 23 10:28:29 voyager3 kernel: usb 5-1: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
Sep 23 10:28:29 voyager3 kernel: usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 23 10:28:29 voyager3 kernel: usb 5-1: Product: BCM2045B
Sep 23 10:28:29 voyager3 kernel: usb 5-1: Manufacturer: Broadcom Corp
Sep 23 10:28:29 voyager3 kernel: usb 5-2: new full speed USB device using uhci_hcd and address 3
Sep 23 10:28:29 voyager3 kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
Sep 23 10:28:29 voyager3 kernel: ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
Sep 23 10:28:29 voyager3 kernel: scsi0 : ahci
Sep 23 10:28:29 voyager3 kernel: scsi1 : ahci
Sep 23 10:28:29 voyager3 kernel: scsi2 : ahci
Sep 23 10:28:29 voyager3 kernel: scsi3 : ahci
Sep 23 10:28:29 voyager3 kernel: ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 16
Sep 23 10:28:29 voyager3 kernel: ata2: DUMMY
Sep 23 10:28:29 voyager3 kernel: ata3: DUMMY
Sep 23 10:28:29 voyager3 kernel: ata4: DUMMY
Sep 23 10:28:29 voyager3 kernel: usb 5-2: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: usb 5-2: New USB device found, idVendor=0483, idProduct=2016
Sep 23 10:28:29 voyager3 kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 23 10:28:29 voyager3 kernel: usb 5-2: Product: Biometric Coprocessor
Sep 23 10:28:29 voyager3 kernel: usb 5-2: Manufacturer: STMicroelectronics
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: new full speed USB device using ehci_hcd and address 5
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: New USB device found, idVendor=03f0, idProduct=4d11
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: Product: PSC 1400 series
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: Manufacturer: HP
Sep 23 10:28:29 voyager3 kernel: usb 1-6.1: SerialNumber: CN62KDB0XP04DZ
Sep 23 10:28:29 voyager3 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 23 10:28:29 voyager3 kernel: ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
Sep 23 10:28:29 voyager3 kernel: ata1.00: 156301488 sectors, multi 16: LBA48 
Sep 23 10:28:29 voyager3 kernel: ata1.00: configured for UDMA/100
Sep 23 10:28:29 voyager3 kernel: scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4I PQ: 0 ANSI: 5
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 23 10:28:29 voyager3 kernel: sda:<6>usb 1-6.2: new low speed USB device using ehci_hcd and address 6
Sep 23 10:28:29 voyager3 kernel: usb 1-6.2: configuration #1 chosen from 1 choice
Sep 23 10:28:29 voyager3 kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input3
Sep 23 10:28:29 voyager3 kernel: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-6.2
Sep 23 10:28:29 voyager3 kernel: Fixing up Logitech keyboard report descriptor
Sep 23 10:28:29 voyager3 kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.1/input/input4
Sep 23 10:28:29 voyager3 kernel: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-6.2
Sep 23 10:28:29 voyager3 kernel: usb 1-6.2: New USB device found, idVendor=046d, idProduct=c50c
Sep 23 10:28:29 voyager3 kernel: usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 23 10:28:29 voyager3 kernel: usb 1-6.2: Product: USB Receiver
Sep 23 10:28:29 voyager3 kernel: usb 1-6.2: Manufacturer: Logitech
Sep 23 10:28:29 voyager3 kernel: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3 sda4
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 23 10:28:29 voyager3 kernel: kjournald starting.  Commit interval 5 seconds
Sep 23 10:28:29 voyager3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 23 10:28:29 voyager3 kernel: SELinux:  Disabled at runtime.
Sep 23 10:28:29 voyager3 kernel: type=1404 audit(1222165683.823:2): selinux=0 auid=4294967295 ses=4294967295
Sep 23 10:28:29 voyager3 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
Sep 23 10:28:29 voyager3 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
Sep 23 10:28:29 voyager3 kernel: e1000e: Copyright (c) 1999-2007 Intel Corporation.
Sep 23 10:28:29 voyager3 kernel: e1000e 0000:02:00.0: Disabling L1 ASPM
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:d3:21:4c:32
Sep 23 10:28:29 voyager3 kernel: eth0: Intel(R) PRO/1000 Network Connection
Sep 23 10:28:29 voyager3 kernel: eth0: MAC: 2, PHY: 2, PBA No: 005302-003
Sep 23 10:28:29 voyager3 kernel: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver usblp
Sep 23 10:28:29 voyager3 kernel: intel_rng: FWH not detected
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: scsi4 : ata_piix
Sep 23 10:28:29 voyager3 kernel: scsi5 : ata_piix
Sep 23 10:28:29 voyager3 kernel: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
Sep 23 10:28:29 voyager3 kernel: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Sep 23 10:28:29 voyager3 kernel: input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Sep 23 10:28:29 voyager3 kernel: ACPI: Power Button (FF) [PWRF]
Sep 23 10:28:29 voyager3 kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
Sep 23 10:28:29 voyager3 kernel: [drm] Initialized drm 1.1.0 20060810
Sep 23 10:28:29 voyager3 kernel: ACPI: Lid Switch [LID]
Sep 23 10:28:29 voyager3 kernel: input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
Sep 23 10:28:29 voyager3 kernel: ACPI: Sleep Button (CM) [SLPB]
Sep 23 10:28:29 voyager3 kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Sep 23 10:28:29 voyager3 kernel: parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
Sep 23 10:28:29 voyager3 kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.19
Sep 23 10:28:29 voyager3 kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Sep 23 10:28:29 voyager3 kernel: thinkpad_acpi: ThinkPad BIOS 7BET43WW (1.03 ), EC 7BHT28WW-1.01
Sep 23 10:28:29 voyager3 kernel: thinkpad_acpi: Lenovo ThinkPad X60s
Sep 23 10:28:29 voyager3 kernel: thinkpad_acpi: radio switch found; radios are enabled
Sep 23 10:28:29 voyager3 kernel: input: ThinkPad Extra Buttons as /devices/virtual/input/input8
Sep 23 10:28:29 voyager3 kernel: iTCO_vendor_support: vendor-support=0
Sep 23 10:28:29 voyager3 kernel: ata5.00: ATAPI: MATSHITADVD-RAM UJ-842, RB01, max UDMA/33
Sep 23 10:28:29 voyager3 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Sep 23 10:28:29 voyager3 kernel: iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
Sep 23 10:28:29 voyager3 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 23
Sep 23 10:28:29 voyager3 kernel: Bluetooth: Core ver 2.11
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 31
Sep 23 10:28:29 voyager3 kernel: Bluetooth: HCI device and connection manager initialized
Sep 23 10:28:29 voyager3 kernel: Bluetooth: HCI socket layer initialized
Sep 23 10:28:29 voyager3 kernel: nsc-ircc 00:0c: activated
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, chip->init
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, Found chip at base=0x164e
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, driver loaded (Dag Brattli)
Sep 23 10:28:29 voyager3 kernel: IrDA: Registered device irda0
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, Found dongle: No dongle connected
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, chip->init
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, Found chip at base=0x02e
Sep 23 10:28:29 voyager3 kernel: nsc-ircc, driver loaded (Dag Brattli)
Sep 23 10:28:29 voyager3 kernel: ata5.00: configured for UDMA/33
Sep 23 10:28:29 voyager3 kernel: scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-842   RB01 PQ: 0 ANSI: 5
Sep 23 10:28:29 voyager3 kernel: scsi 4:0:0:0: Attached scsi generic sg1 type 5
Sep 23 10:28:29 voyager3 kernel: Bluetooth: HCI USB driver ver 2.9
Sep 23 10:28:29 voyager3 kernel: usbcore: registered new interface driver hci_usb
Sep 23 10:28:29 voyager3 kernel: sdhci: Secure Digital Host Controller Interface driver
Sep 23 10:28:29 voyager3 kernel: sdhci: Copyright(c) Pierre Ossman
Sep 23 10:28:29 voyager3 kernel: sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18
Sep 23 10:28:29 voyager3 kernel: sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
Sep 23 10:28:29 voyager3 kernel: mmc0: SDHCI at 0xe4301800 irq 18 DMA
Sep 23 10:28:29 voyager3 kernel: Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c]
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 23 10:28:29 voyager3 kernel: [drm] Initialized i915 1.12.0 20071122 on minor 0
Sep 23 10:28:29 voyager3 kernel: ACPI: Error installing bay notify handler
Sep 23 10:28:29 voyager3 kernel: iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds
Sep 23 10:28:29 voyager3 kernel: iwl3945: Copyright(c) 2003-2008 Intel Corporation
Sep 23 10:28:29 voyager3 kernel: ACPI: AC Adapter [AC] (on-line)
Sep 23 10:28:29 voyager3 kernel: ppdev: user-space parallel port driver
Sep 23 10:28:29 voyager3 kernel: Yenta: ISA IRQ mask 0x0c30, PCI irq 16
Sep 23 10:28:29 voyager3 kernel: Socket status: 30000006
Sep 23 10:28:29 voyager3 kernel: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0x9000-0xcfff: clean.
Sep 23 10:28:29 voyager3 kernel: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
Sep 23 10:28:29 voyager3 kernel: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
Sep 23 10:28:29 voyager3 kernel: ACPI: Battery Slot [BAT0] (battery absent)
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:29 voyager3 kernel: iwl3945: Detected Intel Wireless WiFi Link 3945ABG
Sep 23 10:28:29 voyager3 kernel: iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Sep 23 10:28:29 voyager3 kernel: firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.0
Sep 23 10:28:29 voyager3 kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input9
Sep 23 10:28:29 voyager3 kernel: ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
Sep 23 10:28:29 voyager3 kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/device:06/input/input10
Sep 23 10:28:29 voyager3 kernel: ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0x100-0x3af: clean.
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0x820-0x8ff: clean.
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0xc00-0xcf7: clean.
Sep 23 10:28:29 voyager3 kernel: cs: IO port probe 0xa00-0xaff: clean.
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
Sep 23 10:28:29 voyager3 kernel: firewire_core: created device fw0: GUID 000ae40600122009, S400
Sep 23 10:28:29 voyager3 kernel: Driver 'sr' needs updating - please use bus_type methods
Sep 23 10:28:29 voyager3 kernel: sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Sep 23 10:28:29 voyager3 kernel: Uniform CD-ROM driver Revision: 3.20
Sep 23 10:28:29 voyager3 kernel: ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:29 voyager3 kernel: hda_intel: probe_mask set to 0x1 for device 17aa:2010
Sep 23 10:28:29 voyager3 kernel: ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
Sep 23 10:28:29 voyager3 kernel: ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x3
Sep 23 10:28:29 voyager3 kernel: ALSA sound/pci/hda/hda_codec.c:2236: hda_codec: model 'thinkpad' is selected for config 17aa:0 (Lenovo Thinkpad)
Sep 23 10:28:29 voyager3 kernel: NET: Registered protocol family 10
Sep 23 10:28:29 voyager3 kernel: lo: Disabled Privacy Extensions
Sep 23 10:28:29 voyager3 kernel: device-mapper: uevent: version 1.0.3
Sep 23 10:28:29 voyager3 kernel: device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Sep 23 10:28:29 voyager3 kernel: device-mapper: multipath: version 1.0.5 loaded
Sep 23 10:28:29 voyager3 kernel: EXT3 FS on sda8, internal journal
Sep 23 10:28:29 voyager3 kernel: kjournald starting.  Commit interval 5 seconds
Sep 23 10:28:29 voyager3 kernel: EXT3 FS on sda9, internal journal
Sep 23 10:28:29 voyager3 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 23 10:28:29 voyager3 kernel: fuse init (API version 7.9)
Sep 23 10:28:29 voyager3 kernel: Adding 1580000k swap on /dev/sda10.  Priority:-1 extents:1 across:1580000k
Sep 23 10:28:29 voyager3 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Sep 23 10:28:29 voyager3 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 23 10:28:29 voyager3 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Sep 23 10:28:29 voyager3 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 23 10:28:29 voyager3 rpc.statd[2058]: Version 1.1.2 Starting
Sep 23 10:28:30 voyager3 kernel: RPC: Registered udp transport module.
Sep 23 10:28:30 voyager3 kernel: RPC: Registered tcp transport module.
Sep 23 10:28:31 voyager3 kernel: warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
Sep 23 10:28:31 voyager3 pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
Sep 23 10:28:31 voyager3 acpid: starting up
Sep 23 10:28:33 voyager3 acpid: client connected from 2275[68:68]
Sep 23 10:28:37 voyager3 hal_lpadmin: Unable to connect to CUPS: 'httpConnectionEncrypt failed'.  Is CUPS running?
Sep 23 10:28:37 voyager3 hal_lpadmin: File "/usr/libexec/hal_lpadmin", line 474, in main#012    h = HalLpAdmin()
Sep 23 10:28:37 voyager3 hal_lpadmin: File "/usr/libexec/hal_lpadmin", line 447, in __init__#012    self.addPrinter()
Sep 23 10:28:37 voyager3 hal_lpadmin: File "/usr/libexec/hal_lpadmin", line 459, in addPrinter#012    printer = HalPrinter()
Sep 23 10:28:37 voyager3 hal_lpadmin: File "/usr/libexec/hal_lpadmin", line 52, in __init__#012    sys.exit (1)
Sep 23 10:28:37 voyager3 hal_lpadmin: SystemExit: 1
Sep 23 10:28:38 voyager3 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:38 voyager3 kernel: Registered led device: iwl-phy0:radio
Sep 23 10:28:38 voyager3 kernel: Registered led device: iwl-phy0:assoc
Sep 23 10:28:38 voyager3 kernel: Registered led device: iwl-phy0:RX
Sep 23 10:28:38 voyager3 kernel: Registered led device: iwl-phy0:TX
Sep 23 10:28:38 voyager3 kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 23 10:28:40 voyager3 kernel: vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
Sep 23 10:28:40 voyager3 hcid[2362]: Bluetooth HCI daemon
Sep 23 10:28:40 voyager3 hcid[2362]: Parsing /etc/bluetooth/main.conf failed: No such file or directory
Sep 23 10:28:41 voyager3 hcid[2362]: HCI dev 0 registered
Sep 23 10:28:41 voyager3 hcid[2362]: Starting SDP server
Sep 23 10:28:41 voyager3 kernel: Bluetooth: L2CAP ver 2.9
Sep 23 10:28:41 voyager3 kernel: Bluetooth: L2CAP socket layer initialized
Sep 23 10:28:41 voyager3 kernel: Bluetooth: RFCOMM socket layer initialized
Sep 23 10:28:41 voyager3 kernel: Bluetooth: RFCOMM TTY layer initialized
Sep 23 10:28:41 voyager3 kernel: Bluetooth: RFCOMM ver 1.8
Sep 23 10:28:41 voyager3 hcid[2362]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
Sep 23 10:28:41 voyager3 hcid[2362]: Registered input manager path:/org/bluez/input
Sep 23 10:28:41 voyager3 hcid[2362]: Unix socket created: 13
Sep 23 10:28:41 voyager3 hcid[2362]: Registered manager path:/org/bluez/audio
Sep 23 10:28:41 voyager3 kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
Sep 23 10:28:41 voyager3 kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Sep 23 10:28:41 voyager3 kernel: Bluetooth: BNEP filters: protocol multicast
Sep 23 10:28:41 voyager3 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 23 10:28:41 voyager3 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 23 10:28:41 voyager3 kernel: Bridge firewalling registered
Sep 23 10:28:41 voyager3 kernel: Registered led device: iwl-phy0:radio
Sep 23 10:28:41 voyager3 kernel: Registered led device: iwl-phy0:assoc
Sep 23 10:28:41 voyager3 kernel: Registered led device: iwl-phy0:RX
Sep 23 10:28:41 voyager3 kernel: Registered led device: iwl-phy0:TX
Sep 23 10:28:41 voyager3 kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 23 10:28:41 voyager3 kernel: pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Sep 23 10:28:41 voyager3 hcid[2362]: bridge pan0 created
Sep 23 10:28:41 voyager3 hcid[2362]: Registered manager path:/org/bluez/network
Sep 23 10:28:41 voyager3 hcid[2362]: Registered server path:/org/bluez/network/nap
Sep 23 10:28:41 voyager3 hcid[2362]: Registered server path:/org/bluez/network/gn
Sep 23 10:28:41 voyager3 hcid[2362]: Registered server path:/org/bluez/network/panu
Sep 23 10:28:41 voyager3 hcid[2362]: Registered manager path:/org/bluez/serial
Sep 23 10:28:41 voyager3 hcid[2362]: HCI dev 0 up
Sep 23 10:28:41 voyager3 hcid[2362]: Device hci0 has been added
Sep 23 10:28:41 voyager3 hcid[2362]: Starting security manager 0
Sep 23 10:28:41 voyager3 hcid[2362]: Device hci0 has been activated
Sep 23 10:28:42 voyager3 kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 23 10:28:43 voyager3 dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Found user 'avahi' (UID 498) and group 'avahi' (GID 494).
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Successfully dropped root privileges.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: avahi-daemon 0.6.22 starting up.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Successfully called chroot().
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Successfully dropped remaining capabilities.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Loading service file /services/ssh.service.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Network interface enumeration completed.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Registering new address record for fe80::213:2ff:fe16:471c on wlan0.*.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Server startup complete. Host name is voyager3.local. Local service cookie is 1614286494.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Service "voyager3" (/services/ssh.service) successfully established.
Sep 23 10:28:43 voyager3 avahi-daemon[2531]: Registering HINFO record with values 'I686'/'LINUX'.
Sep 23 10:28:46 voyager3 dhclient: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Sep 23 10:28:46 voyager3 dhclient: DHCPACK from 192.168.1.1
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.34.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: New relevant interface wlan0.IPv4 for mDNS.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Registering new address record for 192.168.1.34 on wlan0.IPv4.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Withdrawing address record for 192.168.1.34 on wlan0.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.34.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Interface wlan0.IPv4 no longer relevant for mDNS.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.34.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: New relevant interface wlan0.IPv4 for mDNS.
Sep 23 10:28:46 voyager3 avahi-daemon[2531]: Registering new address record for 192.168.1.34 on wlan0.IPv4.
Sep 23 10:28:46 voyager3 NET[2661]: /sbin/dhclient-script : updated /etc/resolv.conf
Sep 23 10:28:46 voyager3 dhclient: bound to 192.168.1.34 -- renewal in 37673 seconds.
Sep 23 10:28:46 voyager3 acpid: client connected from 2679[0:0]
Sep 23 10:28:50 voyager3 gconfd (gdm-2736): démarrage (version 2.22.0), pid 2736 utilisateur « gdm »
Sep 23 10:28:51 voyager3 gconfd (gdm-2736): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Sep 23 10:28:51 voyager3 gconfd (gdm-2736): Adresse « xml:readonly:/etc/gconf/gconf.xml.system » résolue vers une source de configuration en lecture seule à la position 1
Sep 23 10:28:51 voyager3 gconfd (gdm-2736): Adresse « xml:readonly:/var/lib/gdm/.gconf.mandatory » résolue vers une source de configuration en lecture seule à la position 2
Sep 23 10:28:51 voyager3 gconfd (gdm-2736): Adresse « xml:readwrite:/var/lib/gdm/.gconf » résolue vers une source de configuration accessible en écriture à la position 3
Sep 23 10:28:51 voyager3 gconfd (gdm-2736): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 4
Sep 23 10:28:55 voyager3 gconfd (gdm-2736): Erreur lors de la définition de la valeur de « /apps/gnome-screensaver/power_management_delay » : Impossible d'écraser une valeur existante en lecture seule: La valeur de « /apps/gnome-screensaver/power_management_delay » est définie dans une source en lecture seule en premier dans votre chemin de configuration
Sep 23 10:28:55 voyager3 gconfd (gdm-2736): Erreur lors de la définition de la valeur de « /apps/gnome-screensaver/power_management_delay » : Impossible d'écraser une valeur existante en lecture seule: La valeur de « /apps/gnome-screensaver/power_management_delay » est définie dans une source en lecture seule en premier dans votre chemin de configuration
Sep 23 10:29:02 voyager3 gconfd (jettero-2788): starting (version 2.22.0), pid 2788 user 'jettero'
Sep 23 10:29:02 voyager3 gconfd (jettero-2788): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Sep 23 10:29:02 voyager3 gconfd (jettero-2788): Resolved address "xml:readwrite:/home/jettero/.gconf" to a writable configuration source at position 1
Sep 23 10:29:02 voyager3 gconfd (jettero-2788): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Sep 23 10:29:03 voyager3 gconfd (gdm-2736): Sortie
Sep 23 10:29:03 voyager3 gnome-keyring-daemon[2811]: Couldn't unlock login keyring with provided password
Sep 23 10:29:03 voyager3 gnome-keyring-daemon[2811]: Failed to unlock login on startup
Sep 23 10:29:29 voyager3 gconfd (jettero-2788): Resolved address "xml:readwrite:/home/jettero/.gconf" to a writable configuration source at position 0
Sep 23 10:29:30 voyager3 kerneloops: Submitted 0 kernel oopses to www.kerneloops.org
Sep 23 10:29:30 voyager3 hcid[2362]: Default passkey agent (:1.25, /org/bluez/passkey) registered
Sep 23 10:29:30 voyager3 hcid[2362]: Default authorization agent (:1.25, /org/bluez/auth) registered
Sep 23 10:29:33 voyager3 nm-system-settings: Loaded plugin ifcfg-fedora: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-lo ... 
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora:     error: Ignoring loopback device config.
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ... 
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora:     read connection 'System eth0'
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora: Ignoring connection 'System eth0' and its device because NM_CONTROLLED was false.
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0:1 ... 
Sep 23 10:29:33 voyager3 nm-system-settings: address is not provided
Sep 23 10:29:33 voyager3 nm-system-settings:    ifcfg-fedora:     error: Connection was invalid
Sep 23 10:29:43 voyager3 kernel: UDF-fs: Partition marked readonly; forcing readonly mount
Sep 23 10:29:45 voyager3 kernel: UDF-fs INFO UDF: Mounting volume '13March04_IdealOrgs_FrLat', timestamp 2008/01/21 22:02 (1078)
Sep 23 10:29:45 voyager3 hald: mounted /dev/sr0 on behalf of uid 500
Sep 23 10:29:45 voyager3 gnome-keyring-daemon[2811]: adding removable location: volume_label_13March04_IdealOrgs_FrLat at /media/13March04_IdealOrgs_FrLat
Sep 23 10:30:16 voyager3 gconfd (root-3249): démarrage (version 2.22.0), pid 3249 utilisateur « root »
Sep 23 10:30:16 voyager3 gconfd (root-3249): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Sep 23 10:30:16 voyager3 gconfd (root-3249): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Sep 23 10:30:16 voyager3 gconfd (root-3249): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2

pmarion

La ligne '/proc/kmsg started' est typiquement le début d'un boot.
Quelles sont les lignes qui précèdent ?

jettero

Voilà :

Sep 23 09:44:44 voyager3 nm-system-settings:    ifcfg-fedora: parsing /etc/sysconfig/network-scripts/ifcfg-eth0:1 ... 
Sep 23 09:44:44 voyager3 nm-system-settings: address is not provided
Sep 23 09:44:44 voyager3 nm-system-settings:    ifcfg-fedora:     error: Connection was invalid
Sep 23 09:44:55 voyager3 kernel: UDF-fs: Partition marked readonly; forcing readonly mount
Sep 23 09:44:58 voyager3 kernel: UDF-fs INFO UDF: Mounting volume '13March04_IdealOrgs_FrLat', timestamp 2008/01/21 22:02 (1078)
Sep 23 09:44:58 voyager3 hald: mounted /dev/sr0 on behalf of uid 500
Sep 23 09:44:58 voyager3 gnome-keyring-daemon[2812]: adding removable location: volume_label_13March04_IdealOrgs_FrLat at /media/13March04_IdealOrgs_FrLat
Sep 23 09:49:18 voyager3 gconfd (root-4012): démarrage (version 2.22.0), pid 4012 utilisateur « root »
Sep 23 09:49:18 voyager3 gconfd (root-4012): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Sep 23 09:49:18 voyager3 gconfd (root-4012): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Sep 23 09:49:18 voyager3 gconfd (root-4012): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Sep 23 09:54:39 voyager3 kernel: ACPI: Critical trip point
Sep 23 09:54:39 voyager3 kernel: Critical temperature reached (128 C), shutting down.
Sep 23 09:54:39 voyager3 gconfd (jettero-2791): Exiting
Sep 23 09:54:39 voyager3 init: tty4 main process (2612) killed by TERM signal
Sep 23 09:54:39 voyager3 init: tty5 main process (2613) killed by TERM signal
Sep 23 09:54:39 voyager3 init: tty2 main process (2614) killed by TERM signal
Sep 23 09:54:39 voyager3 init: tty3 main process (2615) killed by TERM signal
Sep 23 09:54:39 voyager3 init: tty1 main process (2616) killed by TERM signal
Sep 23 09:54:39 voyager3 init: tty6 main process (2617) killed by TERM signal
Sep 23 09:54:39 voyager3 bonobo-activation-server (jettero-4774): could not associate with desktop session: Failed to connect to socket /tmp/dbus-cA9WedjqdE: Connexion refusée
Sep 23 09:54:39 voyager3 kernel: printk: 1 messages suppressed.
Sep 23 09:54:39 voyager3 kernel: tomboy[3017]: segfault at 13a2548 ip 013a2548 sp bfe6d53c error 4 in libnodoka.so[13af000+12000]
Sep 23 09:54:39 voyager3 avahi-daemon[2535]: Got SIGTERM, quitting.
Sep 23 09:54:39 voyager3 avahi-daemon[2535]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.34.
Sep 23 09:54:40 voyager3 hcid[2366]: Unregistered manager path
Sep 23 09:54:40 voyager3 hcid[2366]: Unregistered manager path
Sep 23 09:54:40 voyager3 hcid[2366]: bridge pan0 removed
Sep 23 09:54:40 voyager3 hcid[2366]: Unregistered manager path
Sep 23 09:54:40 voyager3 hcid[2366]: Stopping SDP server
Sep 23 09:54:40 voyager3 hcid[2366]: Unregister path: /org/bluez/hci0
Sep 23 09:54:40 voyager3 hcid[2366]: Exit
Sep 23 09:54:41 voyager3 acpid: exiting
Sep 23 09:54:41 voyager3 dhclient: receive_packet failed on wlan0: Network is down
Sep 23 09:54:41 voyager3 kernel: ACPI: PCI interrupt for device 0000:03:00.0 disabled
Sep 23 09:54:42 voyager3 console-kit-daemon[2179]: GLib-CRITICAL: g_async_queue_unref: assertion `queue->waiting_threads == 0' failed
Sep 23 09:54:42 voyager3 nm-system-settings: disconnected from the system bus, exiting.
Sep 23 09:54:42 voyager3 rpc.statd[2061]: Caught signal 15, un-registering and exiting.
Sep 23 09:54:42 voyager3 rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Sep 23 09:54:43 voyager3 auditd[2004]: The audit daemon is exiting.
Sep 23 09:54:43 voyager3 kernel: audit(1222156483.093:26): audit_pid=0 old=2004 by auid=4294967295 res=1
Sep 23 09:54:43 voyager3 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide
Sep 23 09:54:44 voyager3 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning function
Sep 23 09:54:44 voyager3 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run
Sep 23 10:28:29 voyager3 kernel: imklog 3.18.1, log source = /proc/kmsg started.
Sep 23 10:28:29 voyager3 kernel: Initializing cgroup subsys cpuset
Sep 23 10:28:29 voyager3 kernel: Linux version 2.6.25.14-108.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 14:08:11 EDT 2008

opossum1er

Problème classique sur les portables, mauvais refroidissement... Ça survient au bout de plusieurs mois. Les symptômes sont toujours les mêmes: plus le PC reste allumé et plus le délai pour qu'il s'éteigne est réduit. Pour en être sur, tu peux surélever le portable et normalement il devrait tenir plus longtemps sans s'éteindre. Un nettoyage du ventilo devrait résoudre le problème.

nouvo09

Sep 23 09:54:39 voyager3 kernel: ACPI: Critical trip point
Sep 23 09:54:39 voyager3 kernel: Critical temperature reached (128 C), shutting down.

Tu as la réponse là. Maintenant il faut savoir pourquoi.

pmarion

Sep 23 09:54:39 voyager3 kernel: ACPI: Critical trip point
Sep 23 09:54:39 voyager3 kernel: Critical temperature reached (128 C), shutting down.
Sep 23 09:54:39 voyager3 gconfd (jettero-2791): Exiting

Tu pourrais vérifier la température CPU, CG, (tout dépend de la carte mère) avec des outils comme sensors et une interface graphique pour visualiser tout cela confortablement.
Essaie
yum install lm_sensors
yum install gkrellm

Mais il y a d'autres interfaces graphiques
yum search sensors

jettero

Merci les gars.

Je vais faire ça et vous redire. ça reste assez étrange mais je me suis douté que c'était ça.

Je vais donc tester ces outils et voir s'ils me donnent une indication du processus qui déconne.

Merci

pmarion

gkrellm peut t'afficher la charge CPU et dès que tu vois qu'elle monte anormalement tu peux lancer la commande 'top' pour voir le détail des processus consommant anormalement de CPU.

Marcet

Ce que tu dois savoir, c'est qu'il va falloir que tu démontes ton portable pour nettoyer le système de refroidissement. Une simple bombe d'air pulsé ne suffira pas à régler le problème.
La plupart du temps, la poussière n'est pas visible de l'extérieur, elle se coince entre le ventilateur interne et les ailettes du dissipateur thermique. Ca forme une bande de poussière dense qui empêche le flux d'air de passer.

Si tu es bricoleur, tu peux parfaitement tenter un démontage (en prennant beaucoup de précautions). Sinon, je te conseille de le confier à un professionnel.