installation d'une RT2700E (eeePC901)

Nnicoal · 22 août 2008

Bonsoir,

Je persiste dans la configuration de Fedora pour mon eeePc 901. Après debut d'essai d'installation des drivers windows avec ndiswrapper je me suis aperçu que ma carte est une RaLink RT2700E.

A votre avis, dois-je essayer les drivers rt2x00 serialmonkey malgré le fait que leur site ne parle pas d'une RT2700 ou est ce que je continue sur l'utilisation de ndiswrapper ?

Merci pour votre aide 🙂

nicofo · 22 août 2008

Je ne sais pas si RT2700E. est supporté par rt2x00, mais c'est très simple pour toi de tester vu que ce driver est intégré au noyau Fedora.
Démonte ndiswrapper (modprobe -r ndiswrapper), puis monte rt2x00 (modprobe ??) [mais je ne sais pas quoi monter : tu as le choix entre rt61pci, rt73usb, rt2400pci rt250usb, rt2500pci : si aucun n'est compatible avec ta rt2700, j'ai peur que tu doives continuer avec ndiswrapper.]
Peux-etre un spécialiste passant par ici t'en dira plus...

Kkwizart · 23 août 2008

@nicoal
Est ce que tu peux donner la sortie de /sbin/lspci ?
Est ce que tu as un pilote alternatif de chargé lorsque ndiswrapper est utilisé ?

A priori le module sera chargé automatiquement si ton matériel est supporté directement dans le noyau.
Si il ne l'est pas. Il est peu probable que tu ais à compiler quoique ce soit. C'est que le support n'est pas encore pret.

Préfères utiliser/tester un noyau récent

Nnicoal · 23 août 2008

Après quelques recherches j'ai trouvé que ralink fournissait les sources de ses drivers (http://www.ralinktech.com/ralink/Home/Support/Linux.html). J'en suis donc à essayer de les compiler mais make n'est pas motivé :

make[1]: *** Pas de règle pour fabriquer la cible « modules ». Arrêt.
make[1]: quittant le répertoire « /usr/src/kernels/2.6.25.14-108.fc9.i686 »

Le dit répertoire je l'ai créé à la main car il n'existait pas malgré le fait qu'un lien symbolique vers lui était présent dans /lib/modules/2.6.25.14-108.fc9.i686

le readme précise quelques flag ou variable à positionner mais je ne comprend pas bien ce qu'il faut faire :

3> In os/linux/config.mk 
    define the GCC and LD of the target machine
    define the compiler flags CFLAGS
    modify to meet your need.
    ** Build for being controlled by NetworkManager or wpa_supplicant wext functions
       Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
       => #>cd wpa_supplicant-x.x
       => #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
    ** Build for being controlled by WpaSupplicant with Ralink Driver
       Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
       => #>cd wpa_supplicant-0.5.7
       => #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d

PS : une dernière petite question au hasard : lspci, lshw etc... ne voient pas ma carte wifi. le voyant est éteind, la carte doit l'être aussi. comment l'allumer si la touche [fn+wifi] ne fonctionne pas ?

Nnicoal · 23 août 2008

kwizart wrote:@nicoal
Est ce que tu peux donner la sortie de /sbin/lspci ?
Est ce que tu as un pilote alternatif de chargé lorsque ndiswrapper est utilisé ?

A priori le module sera chargé automatiquement si ton matériel est supporté directement dans le noyau.
Si il ne l'est pas. Il est peu probable que tu ais à compiler quoique ce soit. C'est que le support n'est pas encore pret.

Préfères utiliser/tester un noyau récent

lspci :

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
03:00.0 Ethernet controller: Attansic Technology Corp. Unknown device 1026 (rev b0)

lshw -C network

  *-network               
       description: Ethernet interface
       product: Attansic Technology Corp.
       vendor: Attansic Technology Corp.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: b0
       serial: 00:22:15:71:33:fd
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI duplex=full firmware=L1e ip=192.168.2.5 latency=0 link=yes module=atl1e multicast=yes port=twisted pair speed=100MB/s
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: pan0
       serial: 66:7d:fc:52:a3:5d
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

uname -r : 2.6.25.14-108.fc9.i686

J'ai installé ndiswrapper mais n'ai pas encore trouvé le .inf qui va bien.

Kkwizart · 23 août 2008

Est ce que tu peux poster la sortie de la commande dmesg ?

Peut être qu'il faut installer un nouveau firmware pour ce modèle.

Nnicoal · 23 août 2008

~~euh c'est très long la sortie de dmesg... je mets tout ?~~

Initializing cgroup subsys cpuset
Linux version 2.6.25.14-108.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 14:08:11 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
 BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
 BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
 BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00ff780] 000ff780
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 260000) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   260000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   260000
On node 0 totalpages: 260000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 239 pages used for memmap
  HighMem zone: 30385 pages, LIFO batch:7
  Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000FBCD0, 0014 (r0 ACPIAM)
ACPI: RSDT 3F7A0000, 003C (r1 A_M_I_ OEMRSDT   7000811 MSFT       97)
ACPI: FACP 3F7A0200, 0084 (r2 A_M_I_ OEMFACP   7000811 MSFT       97)
ACPI: DSDT 3F7A05B0, 526D (r1  P0017 P0017000        0 INTL 20051117)
ACPI: FACS 3F7AE000, 0040
ACPI: APIC 3F7A0390, 005C (r1 A_M_I_ OEMAPIC   7000811 MSFT       97)
ACPI: MCFG 3F7A03F0, 003C (r1 A_M_I_ OEMMCFG   7000811 MSFT       97)
ACPI: OEMB 3F7AE040, 0061 (r1 A_M_I_ AMI_OEM   7000811 MSFT       97)
ACPI: HPET 3F7A5820, 0038 (r1 A_M_I_ OEMHPET   7000811 MSFT       97)
ACPI: SSDT 3F7AEB80, 04F0 (r1  PmRef    CpuPm     3000 INTL 20051117)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257969
Kernel command line: ro root=UUID=91d18354-5f93-4b08-9060-214d81fa711e rhgb quiet i8042.nomux=1
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b4000 soft=c0794000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1600.095 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023092k/1040000k available (2220k kernel code, 16184k reserved, 1117k data, 284k init, 122496k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc074a000 - 0xc0791000   ( 284 kB)
      .data : 0xc062b2d5 - 0xc0742800   (1117 kB)
      .text : 0xc0400000 - 0xc062b2d5   (2220 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3203.73 BogoMIPS (lpj=1601865)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Booting processor 1/1 ip 4000
CPU 1 irqstacks, hard=c07b5000 soft=c0795000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3199.99 BogoMIPS (lpj=1599997)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Total of 2 processors activated (6403.72 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM Timer: 119ms instead of 100ms
APIC delta adjusted to PM-Timer: 833331 (999989)
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3696 bytes
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
  domain 1: span 00000003
   groups: 00000003
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
  domain 1: span 00000003
   groups: 00000003
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time:  9:16:42  Date: 08/23/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Error attaching device data
ACPI: Error attaching device data
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x25c-0x25f has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
system 00:0c: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
  IO window: e000-efff
  MEM window: 0xf8000000-0xfbffffff
  PREFETCH window: 0x00000000f0000000-0x00000000f6ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
  IO window: disabled.
  MEM window: 0xf7f00000-0xf7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2652k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1219483001.637:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 3F7AE180, 023C (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
ACPI: SSDT 3F7AE450, 0724 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
ACPI: SSDT 3F7AE0B0, 00CC (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
ACPI: SSDT 3F7AE3C0, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [P002] (supports 8 throttling states)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (44 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to: TSC halts in idle.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 4:413:273
  hash matches device tty10
  hash matches device lo
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 904k
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-8: new high speed USB device using ehci_hcd and address 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: New USB device found, idVendor=04f2, idProduct=b071
usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-8: Product: CNF7129
usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-8: SerialNumber: SN0001
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata2.00: ATA-5: ASUS-PHISON SSD, TST2.04U, max UDMA/66
ata2.00: 7880544 sectors, multi 0: LBA 
ata2.01: ATA-5: ASUS-PHISON SSD, TST2.04P, max UDMA/66
ata2.01: 15761088 sectors, multi 0: LBA 
ata2.00: configured for UDMA/66
ata2.01: configured for UDMA/66
scsi 1:0:0:0: Direct-Access     ATA      ASUS-PHISON SSD  TST2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 1:0:1:0: Direct-Access     ATA      ASUS-PHISON SSD  TST2 PQ: 0 ANSI: 5
sd 1:0:1:0: [sdb] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdb] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:1:0: [sdb] Attached SCSI disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1219483008.456:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:171095
SELinux:8192 avtab hash slots allocated. Num of rules:171095
security:  8 users, 12 roles, 2350 types, 116 bools, 1 sens, 1024 cats
security:  72 classes, 171095 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1219483010.036:3): policy loaded auid=4294967295 ses=4294967295
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 2-2: new low speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
usb 2-2: configuration #1 chosen from 1 choice
input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2
usb 2-2: New USB device found, idVendor=046d, idProduct=c016
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Optical USB Mouse
usb 2-2: Manufacturer: Logitech
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.12.0 20071122 on minor 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
ACPI: Power Button (CM) [PWRB]
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101713
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/input/input8
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:1:0: Attached scsi generic sg1 type 0
Linux video capture interface: v2.00
iTCO_vendor_support: vendor-support=0
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r200)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 19
input: PC Speaker as /devices/platform/pcspkr/input/input10
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401
ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1
hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2861:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2865:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2866:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:2874:    inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped
ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave IEC958 Playback Switch, skipped
intel_rng: FWH not detected
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
ADDRCONF(NETDEV_UP): eth0: link is not ready
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

Nnicoal · 23 août 2008

Je viens de mener a terme la solution NDISWrapper et ça ne marche pas. je n'ai pas la ligne "device (adresse) present" lorsque j'execute "ndiswrapper -l".

Je persiste à croire que si j'arrivais à allumer la carte ça marcherai mieux. Aucun possesseur de portable n'a deja eu ce problème (comment activer l'interrupteur logiciel de la carte wifi) ?

Certains de mes raccourcis [fn] ne fonctionne pas tels que le son, l'activation du wifi, et parfois la luminosité. Peut être que je devrait commencer par là...

Nnicoal · 23 août 2008

Pourquoi quand on passe une journée sur un problème on se sent bête en trouvant la solution ? 😢"

Un petit tour dans le bios > onboard > wifi > enable

encore une leçon d'humilité...

EDIT---------------------------------------

Bon finalement je suis pas arrivé au bout de mes peines 🙁

J'ai terminé le tuto ndiswrapper. tout semble fonctionner normalement, ou presque.
Je passe au tuto network manager et là c'est une autre histoire :

- Je n'ai pas de démon NetworkManagerDispatcher. Inconnu au bataillon.
- Dans network manager impossible d'éditer les propriété de mon materiel réseau. il m'affiche une petite popup : "Le nom du profil "Commun" ne peut pas être changé !"
- si je débranche mon cable et que je fais un clique droit sur l'icone de réseau il ne trouve aucun réseau wifi alors qu'il y a un routeur wifi à 4m (max) de mon pc

quelqu'un a t'il des idées ?

infos diverses :

lspci :

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Network controller: RaLink Unknown device 0781
03:00.0 Ethernet controller: Attansic Technology Corp. Unknown device 1026 (rev b0)

lshw -C network

  *-network               
       description: Ethernet interface
       product: Attansic Technology Corp.
       vendor: Attansic Technology Corp.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: b0
       serial: 00:22:15:71:33:fd
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI duplex=full firmware=L1e ip=192.168.2.5 latency=0 link=yes module=atl1e multicast=yes port=twisted pair speed=100MB/s
  *-network
       description: Wireless interface
       product: RaLink
       vendor: RaLink
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: wlan0
       version: 00
       serial: 00:15:af:cb:4e:40
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ndiswrapper+rt2860 driverversion=1.53+Ralink Technology, Corp.,03 latency=0 link=no module=ndiswrapper multicast=yes wireless=IEEE 802.11g
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: pan0
       serial: 6e:8b:36:a2:95:fb
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

ifconfig

eth0      Link encap:Ethernet  HWaddr 00:22:15:71:33:FD  
          inet adr:192.168.2.5  Bcast:192.168.2.255  Masque:255.255.255.0
          adr inet6: fe80::222:15ff:fe71:33fd/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5670 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4694 errors:0 dropped:0 overruns:0 carrier:9
          collisions:0 lg file transmission:1000 
          RX bytes:2039822 (1.9 MiB)  TX bytes:817636 (798.4 KiB)
          Interruption:17 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1830 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1830 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          RX bytes:91660 (89.5 KiB)  TX bytes:91660 (89.5 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:15:AF:CB:4E:40  
          adr inet6: fe80::215:afff:fecb:4e40/64 Scope:Lien
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:0 (0.0 b)  TX bytes:360 (360.0 b)
          Interruption:19 Mémoire:f7ff0000-f8000000

Nnicoal · 4 sept. 2008

Bonjour,

Petite mise à jour de ma situation mais toujours besoin d'aide !

Exit Ndiswrapper, ça ne marche pas. J'ai réussi à compiler les sources des drivers fournis par le constructeur lui-même. Pour ceux que ça intéresse tout ce qu'il y a à savoir se trouve ici : [en] http://forums.fedoraforum.org/showthread.php?t=195429 .

De nouveau la commande iwlist scann voit les réseaux environnant mais Network Manager ne fonctionne toujours pas (il ne voit pas la carte, le materiel n'est pas ajouté, je ne peux toujours pas éditer les propriété du materiel existant). Il y a t'il un moyen de le réinstaller/réinitialiser ?

Très honnêtement je changerais bien pour Wicd, mais le script d'installation (en python) me dit que mon installation de python est mauvaise et google ne m'aide pas beaucoup sur la question. Dois-je ouvrir un sujet pour cette question ?

Kkwizart · 4 sept. 2008

Il y a un paquet livna en attente de révision pour avoir un module externe précompilé (kmod et akmod) pour ce chipset
http://bugzilla.livna.org/show_bug.cgi?id=2083