[neron@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Linux version 2.6.25.14-108.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 13:46:35 EDT 2008
Command line: ro root=UUID=b8241a76-4879-4ce6-8abd-b17a6dc9666f rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 130992) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F9AE0, 0014 (r0 ACPIAM)
ACPI: RSDT 1FFB0000, 0030 (r1 A M I OEMRSDT 6000508 MSFT 97)
ACPI: FACP 1FFB0200, 0081 (r1 A M I OEMFACP 6000508 MSFT 97)
ACPI: DSDT 1FFB03F0, 3F3A (r1 939A8 939A8142 142 INTL 2002026)
ACPI: FACS 1FFC0000, 0040
ACPI: APIC 1FFB0390, 005C (r1 A M I OEMAPIC 6000508 MSFT 97)
ACPI: OEMB 1FFC0040, 0040 (r1 A M I AMI_OEM 6000508 MSFT 97)
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-000000001ffb0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 130992) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000001ffb0000
NODE_DATA [000000000000b000 - 0000000000012fff]
bootmap [0000000000013000 - 0000000000016ff7] pages 4
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-75223b] TEXT DATA BSS
early res: 3 [1fc33000-1ff9f60b] RAMDISK
early res: 4 [9fc00-a0bff] EBDA
early res: 5 [8000-afff] PGTABLE
No mptable found.
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 130992
On node 0 totalpages: 130895
DMA zone: 56 pages used for memmap
DMA zone: 1369 pages reserved
DMA zone: 2574 pages, LIFO batch:0
DMA32 zone: 1734 pages used for memmap
DMA32 zone: 125162 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:df7c0000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 42688 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 127736
Policy zone: DMA32
Kernel command line: ro root=UUID=b8241a76-4879-4ce6-8abd-b17a6dc9666f rhgb quiet
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 1799.944 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ f0000000 size 128 MB
Memory: 506136k/523968k available (2629k kernel code, 17444k reserved, 1382k data, 352k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3600.82 BogoMIPS (lpj=1800412)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12499616
Detected 12.499 MHz APIC timer.
Brought up 1 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=6224 bytes
CPU0 attaching sched-domain:
domain 0: span 00000000,00000001
groups: 00000000,00000001
net_namespace: 1016 bytes
Time: 12:10:23 Date: 08/19/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:03.1: quirk: region 0800-083f claimed by ali7101 ACPI
PCI: Transparent bridge - 0000:00:02.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 12, should be E2 [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
agpgart: Detected AGP bridge 0
Setting up ULi AGP.
agpgart: AGP aperture is 128M @ 0xf0000000
ACPI: RTC can wake from S4
system 00:0a: ioport range 0x400-0x40f has been reserved
system 00:0a: ioport range 0x480-0x48f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x800-0x87f could not be reserved
system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:0b: iomem range 0xffbc0000-0xffbfffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0f: ioport range 0x680-0x6ff has been reserved
system 00:0f: ioport range 0x295-0x296 has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xdffff has been reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0x1fffffff could not be reserved
system 00:10: iomem range 0x0-0x0 could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: a000-cfff
MEM window: 0xff500000-0xff5fffff
PREFETCH window: 0x00000000ceb00000-0x00000000eeafffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3505k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1219147823.405:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: ACPI0007:00 is registered as cooling_device0
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
registered taskstats version 1
Magic number: 4:328:178
hash matches device device:0e
hash matches device platform
Freeing unused kernel memory: 352k freed
Write protecting the kernel read-only data: 1112k
ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:0f.3: EHCI Host Controller
ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.3: debug port 1
ehci_hcd 0000:00:0f.3: irq 23, io mem 0xff6fe800
ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0f.3
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:0f.0: OHCI Host Controller
ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.0: irq 20, io mem 0xff6fd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:0f.0
ACPI: PCI Interrupt 0000:00:0f.1[b] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:0f.1: OHCI Host Controller
ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0f.1: irq 21, io mem 0xff6fc000
hub 1-0:1.0: unable to enumerate USB device on port 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:0f.2: OHCI Host Controller
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:0f.2: irq 22, io mem 0xff6fb000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:0f.2
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:0e.0 disabled
ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:0e.1 disabled
hub 1-0:1.0: unable to enumerate USB device on port 7
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=0471, idProduct=0327
usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2: Product: USB camera
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=03f0, idProduct=0604
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: DeskJet 840C
usb 3-1: Manufacturer: Hewlett-Packard
usb 3-1: SerialNumber: CN0BD1C0BJKV
usb 4-1: new full speed USB device using ohci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
usb 4-1: New USB device found, idVendor=067b, idProduct=2303
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB-Serial Controller
usb 4-1: Manufacturer: Prolific Technology Inc.
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
scsi0 : pata_ali
scsi1 : pata_ali
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
ata1.00: 240121728 sectors, multi 16: LBA
ata1.00: configured for UDMA/133
ata2.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0Y, max UDMA/66
ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
ata2.00: simplex DMA is claimed by other device, disabling DMA
ata2.00: configured for PIO4
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0Y PQ: 0 ANSI: 5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
sata_uli 0000:00:0e.1: version 1.3
ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 19
scsi2 : sata_uli
scsi3 : sata_uli
ata3: SATA max UDMA/133 cmd 0xf80 ctl 0xf00 bmdma 0xd880 irq 19
ata4: SATA max UDMA/133 cmd 0xe80 ctl 0xe00 bmdma 0xd888 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1219147833.963:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:171100
SELinux:8192 avtab hash slots allocated. Num of rules:171100
security: 8 users, 12 roles, 2350 types, 116 bools, 1 sens, 1024 cats
security: 72 classes, 171100 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1219147835.122:3): policy loaded auid=4294967295 ses=4294967295
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: ULi M5263 at pci0000:00:0d.0, 00:13:8f:1e:c9:f5, irq 17.
alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
alim7101_wdt: ALi 1543 South-Bridge not present - WDT not set
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
usbcore: registered new interface driver usblp
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Linux video capture interface: v2.00
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: USB GSPCA camera found. SONIX JPEG (sn9c1xx)
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
usbcore: registered new interface driver gspca
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: gspca driver 01.00.20 registered
sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
usbcore: registered new interface driver sn9c102
ALSA sound/usb/usbaudio.c:2798: 2:2:1: add audio endpoint 0x84
ALSA sound/usb/usbmixer.c:988: [2] FU [Mic Capture Switch] ch = 1, val = 0/1/1
ALSA sound/usb/usbmixer.c:988: [2] FU [Mic Capture Volume] ch = 1, val = 0/6144/256
ALSA sound/usb/usbmixer.c:988: [2] FU [Auto Gain Control] ch = 1, val = 0/1/1
usbcore: registered new interface driver snd-usb-audio
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 18 (level, low) -> IRQ 18
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 4-1:1.0: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
input: PC Speaker as /devices/platform/pcspkr/input/input5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ALSA sound/pci/ac97/ac97_codec.c:2053: AC'97 1 does not respond - RESET
ALSA sound/pci/ac97/ac97_codec.c:2062: AC'97 1 access is not valid [0xffffffff], removing mixer.
ALSA sound/pci/intel8x0.c:2157: Unable to initialize codec #1
intel8x0_measure_ac97_clock: measured 50186 usecs
intel8x0: clocking to 48000
gameport: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 854kHz
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ppdev: user-space parallel port driver
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.29.0 20080528 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1048568k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0xa
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -63127168 ns)
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters.
/builddir/build/BUILD/gspca-kmod-1.00.20/_kmod_build_2.6.25.14-108.fc9.x86_64/gspca_core.c: [gspca_set_isoc_ep:945] ISO EndPoint found 0x81 AlternateSet 8
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
ALSA sound/usb/usbaudio.c:1353: setting usb interface 2:1
ALSA sound/usb/usbaudio.c:1353: setting usb interface 2:1
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
uli526x: eth0 NIC Link is Down
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
[neron@localhost ~]$
Voilà , donc apparemment la partie concernant le portable est là :
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 4-1:1.0: pl2303 converter detected
usb 4-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
J'espère que j'aurai une petite réponse ^^