Voici le résultat de la commande dmesg après redémarrage de ma machine :
Initializing cgroup subsys cpuset
Linux version 2.6.25.14-108.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 14:08:11 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd1800 (usable)
BIOS-e820: 000000003ffd1800 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009f000 for 1024 bytes.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 262097) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262097
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262097
On node 0 totalpages: 262097
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32466 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FC9B0, 0014 (r0 DELL )
ACPI: RSDT 3FFD1F90, 0040 (r1 DELL CPi R 27D50A02 ASL 61)
ACPI: FACP 3FFD2C00, 0074 (r1 DELL CPi R 27D50A02 ASL 61)
ACPI: DSDT 3FFD3800, 3C51 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
ACPI: FACS 3FFE2000, 0040
ACPI: APIC 3FFD3400, 0068 (r1 DELL CPi R 27D50A02 ASL 47)
ACPI: ASF! 3FFD3000, 005B (r16 DELL CPi R 27D50A02 ASL 61)
ACPI: MCFG 3FFD33C0, 003E (r16 DELL CPi R 27D50A02 ASL 61)
ACPI: SSDT 3FFD23E6, 0280 (r1 PmRef Cpu0Ist 3000 INTL 20030522)
ACPI: SSDT 3FFD220E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
ACPI: SSDT 3FFD2013, 01FB (r1 PmRef CpuPm 3000 INTL 20030522)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260050
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b4000 soft=c0794000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1862.101 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030856k/1048388k available (2220k kernel code, 16804k reserved, 1117k data, 284k init, 130884k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc074a000 - 0xc0791000 ( 284 kB)
.data : 0xc062b2d5 - 0xc0742800 (1117 kB)
.text : 0xc0400000 - 0xc062b2d5 (2220 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3726.79 BogoMIPS (lpj=1863398)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
Total of 1 processors activated (3726.79 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3696 bytes
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 11:37:47 Date: 08/19/08
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 3FFD1FD0, 0043 (r1 LMPWR DELLLOM 1001 INTL 20030522)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
system 00:00: iomem range 0x0-0x9fbff could not be reserved
system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xcffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3ffd17ff could not be reserved
system 00:00: iomem range 0x3ffd1800-0x3fffffff could not be reserved
system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
system 00:00: iomem range 0xf0004000-0xf0004fff could not be reserved
system 00:00: iomem range 0xf0005000-0xf0005fff could not be reserved
system 00:00: iomem range 0xf0006000-0xf0006fff could not be reserved
system 00:00: iomem range 0xf0008000-0xf000bfff could not be reserved
system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x1000-0x1005 has been reserved
system 00:02: ioport range 0x1008-0x100f has been reserved
system 00:03: ioport range 0xf400-0xf4fe has been reserved
system 00:03: ioport range 0x1006-0x1007 has been reserved
system 00:03: ioport range 0x100a-0x1059 could not be reserved
system 00:03: ioport range 0x1060-0x107f has been reserved
system 00:03: ioport range 0x1080-0x10bf has been reserved
system 00:03: ioport range 0x10c0-0x10df has been reserved
system 00:03: ioport range 0x10e0-0x10ff has been reserved
system 00:08: ioport range 0x900-0x90f has been reserved
system 00:08: ioport range 0x910-0x91f has been reserved
system 00:08: ioport range 0x920-0x92f has been reserved
system 00:08: ioport range 0x93c-0x93f has been reserved
system 00:08: ioport range 0x940-0x97f has been reserved
system 00:0d: ioport range 0x930-0x93b has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: 0xdfd00000-0xdfefffff
PREFETCH window: 0x00000000d0000000-0x00000000d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: 0xdfc00000-0xdfcfffff
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 0x00002000-0x000020ff
IO window: 0x00002400-0x000024ff
PREFETCH window: 0x50000000-0x53ffffff
MEM window: 0x54000000-0x57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: 0xdfb00000-0xdfbfffff
PREFETCH window: 0x0000000050000000-0x0000000053ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3248k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1219145867.515:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM] (51 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:187:631
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 904k
Marking TSC unstable due to: TSC halts in idle.
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
hub 1-0:1.0: unable to enumerate USB device on port 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 1-0:1.0: unable to enumerate USB device on port 6
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.14-108.fc9.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
usb 1-8: new high speed USB device using ehci_hcd and address 4
usb 1-8: configuration #1 chosen from 1 choice
usb 1-8: New USB device found, idVendor=eb1a, idProduct=2881
usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-8: Product: USB 2881 Video
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=413c, idProduct=8103
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: HID 1241:1177 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.2-2
usb 4-2: New USB device found, idVendor=1241, idProduct=1177
usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata1.00: ATA-6: TOSHIBA MK8026GAX, PA002D, max UDMA/100
ata1.00: 156301488 sectors, multi 8: LBA
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
ata2.00: ATAPI: SONY CD-RW/DVD-ROM CRX850E, 5DK1, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM SONY CDRWDVD CRX850E 5DK1 PQ: 0 ANSI: 5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1219145877.945:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:171100
SELinux:8192 avtab hash slots allocated. Num of rules:171100
security: 8 users, 12 roles, 2350 types, 116 bools, 1 sens, 1024 cats
security: 72 classes, 171100 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1219145879.042:3): policy loaded auid=4294967295 ses=4294967295
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
tg3.c:v3.91 (April 18, 2008)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:a9:b7:a2
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: AC Adapter [AC] (on-line)
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
em28xx new video device (eb1a:2881): interface 0, class 255
em28xx Has usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: em28xx chip ID = 36
em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 5a 00 55 aa 56 77 54 03 00 17 98 01 00 00 00 00
em28xx #0: i2c eeprom f0: 0a 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0x9fa26b20
Vendor/Product ID= eb1a:2881
AC97 audio (5 sample rates)
USB Remote wakeup capable
500mA max power
Table at 0x04, strings=0x206a, 0x006a, 0x0000
em28xx #0: found i2c device @ 0xa0 [eeprom]
em28xx #0: found i2c device @ 0xb8 [tvp5150a]
em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
em28xx #0: Your board has no unique USB ID and thus need a hint to be detected.
em28xx #0: You may try to use card=<n> insmod option to workaround that.
em28xx #0: Please send an email with this log to:
em28xx #0: V4L Mailing List <video4linux-list@redhat.com>
em28xx #0: Board eeprom hash is 0x9fa26b20
em28xx #0: Board i2c devicelist hash is 0x27e10080
em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
em28xx #0: card=0 -> Unknown EM2800 video grabber
em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
em28xx #0: card=2 -> Terratec Cinergy 250 USB
em28xx #0: card=3 -> Pinnacle PCTV USB 2
em28xx #0: card=4 -> Hauppauge WinTV USB 2
em28xx #0: card=5 -> MSI VOX USB 2.0
em28xx #0: card=6 -> Terratec Cinergy 200 USB
em28xx #0: card=7 -> Leadtek Winfast USB II
em28xx #0: card=8 -> Kworld USB2800
em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100
em28xx #0: card=10 -> Hauppauge WinTV HVR 900
em28xx #0: card=11 -> Terratec Hybrid XS
em28xx #0: card=12 -> Kworld PVR TV 2800 RF
em28xx #0: card=13 -> Terratec Prodigy XS
em28xx #0: card=14 -> Pixelview Prolink PlayTV USB 2.0
em28xx #0: card=15 -> V-Gear PocketTV
em28xx #0: card=16 -> Hauppauge WinTV HVR 950
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button (CM) [SBTN]
ACPI: Battery Slot [BAT1] (battery absent)
tvp5150 0-005c: tvp5150am1 detected.
ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
ACPI: Error installing bay notify handler
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/device:23/input/input8
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:28/input/input9
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2d/input/input10
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
input: PC Speaker as /devices/platform/pcspkr/input/input11
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx #0: Found Unknown EM2750/28xx video grabber
ALSA sound/usb/usbaudio.c:2798: 4:2:1: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2798: 4:2:2: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2798: 4:2:3: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2798: 4:2:4: add audio endpoint 0x83
ALSA sound/usb/usbaudio.c:2798: 4:2:5: add audio endpoint 0x83
ALSA sound/usb/usbmixer.c:988: [2] FU [PCM Capture Switch] ch = 1, val = 0/1/1
ALSA sound/usb/usbmixer.c:405: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x201, type = 4, data = 0x0/0x1
ALSA sound/usb/usbmixer.c:988: [2] FU [PCM Capture Volume] ch = 1, val = 0/0/512
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver em28xx
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
intel8x0_measure_ac97_clock: measured 50160 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1e.3 to 64
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ALSA sound/pci/ac97/ac97_codec.c:2152: MC'97 1 converters and GPIO not ready (0xff00)
Yenta: CardBus bridge found at 0000:03:01.0 [1028:0182]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:01.0, mfunc 0x01111122, devctl 0x64
Yenta: ISA IRQ mask 0x0c78, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
cs: IO port probe 0x2000-0x2fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ppdev: user-space parallel port driver
ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[drm] Initialized radeon 1.29.0 20080528 on minor 0
Clocksource tsc unstable (delta = -302942476 ns)
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: fAsync=0 u64DiffCores=1.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000).
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[drm] Num pipes: 1
mtrr: no MTRR for d0000000,4000000 found
eth1: no IPv6 routers present
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
ALSA sound/usb/usbaudio.c:1353: setting usb interface 2:2
ALSA sound/usb/usbaudio.c:1353: setting usb interface 2:2
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
ieee80211_crypt: registered algorithm 'CCMP'
padlock: VIA PadLock not detected.
ieee80211_crypt: registered algorithm 'TKIP'
