J'ai téléchargé et installé le pilote.
Mais il doit bien falloir utiliser un autre logicieil que Xsane car il ne me reconnait toujours pas le scanner...
je tente la méthode breveté Chepioq :
mais moi je ne dois pas suivre bêtement cette méthode car mon scanner est en USB donc je ne dois pas chercher avec lspci mais avec lsusb n'est-ce pas ?
donc
[root@localhost ~]# lsusb
Bus 001 Device 003: ID 04b8:0813 Seiko Epson Corp. Stylus CX6500/6600
Bus 001 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 003 Device 002: ID 045e:008c Microsoft Corp. Wireless Intellimouse Explorer 2.0
Bus 003 Device 001: ID 1d6b:0001
Bus 002 Device 001: ID 1d6b:0001
voilà le /etc/sane.d/dll.conf
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
#canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dell1600n_net
dmc
epson
fujitsu
#gphoto2
genesys
gt68xx
hp
hpsj5s
hp3500
hp4200
hp5400
ibm
leo
lexmark
ma1509
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
pie
pint
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
hpaio
et enfin voilà le /etc/sane.d/epson.conf
# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
# for the GT-6500:
scsi "EPSON SC"
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend.
usb
# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x110
# And for the scanner module, use the following configuration:
#usb /dev/usbscanner0
#usb /dev/usb/scanner0
Si j'ai bien compris, je devais mettre dans /etc/sane.d/epson.conf la ligne :
usb 0x4b8 0x813
oui ou non ?
car maintenant, Xsane reconnait le périphérique mais quand je lance la prévisualiation :
Erreur pendant la lecture Erreurd'I/O sur le périphérique...
j'ai l'impression que ça avance car dans la barre de titre de Xsane j'ai au moins le bon périphérique (avant il essayé denumériser via ma cam (qui ne fonctionne pas bien d'ailleur voir
Problème de Webcam Micosoft)
Bon la suite au prochain RDV