Bonjour,

J'ai deux fichiers. Je l'ai ai télécharger depuis rapid'share sur un disque dur usb formatté en ext3. 
[slide@master-tux disk]$ ls -ail dvd*
ls: ne peut accéder dvd1: Erreur d'entrée/sortie
ls: ne peut accéder dvd2: Erreur d'entrée/sortie
à quoi cela peut être dû ?
globilux wrote:à quoi cela peut être dû ?
Comme te le dis le Monsieur qui exécute le 'ls' il y a une erreur d'entrée/sortie. Comme 'ls' ne n'intéresse qu'aux répertoires et aux inodes, c'est assez bizarre, mais le support USB montrerait des signes de faiblesses (à moins que le câble USB fasse des siennes).

Il doit y avoir des messages complémentaires dans
/var/log/messages


Est-ce que tu tiens aux données sur ce disque externe ?
pmarion wrote:Comme te le dis le Monsieur qui exécute le 'ls' il y a une erreur d'entrée/sortie. Comme 'ls' ne n'intéresse qu'aux répertoires et aux inodes, c'est assez bizarre, mais le support USB montrerait des signes de faiblesses (à moins que le câble USB fasse des siennes).

Il doit y avoir des messages complémentaires dans
/var/log/messages
voici mon fichier 
Apr  4 16:27:11 master-tux avahi-daemon[2611]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3.
Apr  4 16:27:14 master-tux hcid[2424]: Stopping SDP server
Apr  4 16:27:14 master-tux hcid[2424]: Unregister path: /org/bluez
Apr  4 16:27:14 master-tux hcid[2424]: Shutting down local server
Apr  4 16:27:14 master-tux hcid[2424]: Exit
Apr  4 16:27:14 master-tux input[2459]: Unregistered manager path
Apr  4 16:27:14 master-tux input[2459]: Exit
Apr  4 16:27:14 master-tux acpid: exiting
Apr  4 16:27:18 master-tux auditd[2359]: The audit daemon is exiting.
Apr  4 16:27:18 master-tux kernel: audit(1207319238.084:135): audit_pid=0 old=2359 by auid=4294967295
Apr  4 16:27:18 master-tux kernel: Kernel logging (proc) stopped.
Apr  4 16:27:18 master-tux kernel: Kernel log daemon terminating.
Apr  4 16:27:19 master-tux rsyslogd: [origin software="rsyslogd" swVersion="2.0.2" x-pid="2341" x-info="http://www.rsyslog.com"] exiting on signal 15.
Apr  6 16:51:00 master-tux rsyslogd: [origin software="rsyslogd" swVersion="2.0.2" x-pid="2182" x-info="http://www.rsyslog.com"][x-configInfo udpReception="No" udpPort="514" tcpReception="No" tcpPort="0"] restart
Apr  6 16:51:00 master-tux kernel: rklogd 2.0.2, log source = /proc/kmsg started.
Apr  6 16:51:00 master-tux kernel: Initializing cgroup subsys cpuset
Apr  6 16:51:00 master-tux kernel: Linux version 2.6.24.3-50.fc8 (mockbuild@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Mar 20 13:39:08 EDT 2008
Apr  6 16:51:00 master-tux kernel: Command line: ro root=LABEL=/ rhgb quiet
Apr  6 16:51:00 master-tux kernel: BIOS-provided physical RAM map:
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Apr  6 16:51:00 master-tux kernel:  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
Apr  6 16:51:00 master-tux kernel: end_pfn_map = 1179648
Apr  6 16:51:00 master-tux kernel: DMI 2.4 present.
Apr  6 16:51:00 master-tux kernel: ACPI: RSDP 000F65B0, 0014 (r0 GBT   )
Apr  6 16:51:00 master-tux kernel: ACPI: RSDT DFFF3000, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
Apr  6 16:51:00 master-tux kernel: ACPI: FACP DFFF3040, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
Apr  6 16:51:00 master-tux kernel: ACPI: DSDT DFFF30C0, 4845 (r1 GBT    NVDAACPI     1000 MSFT  100000C)
Apr  6 16:51:00 master-tux kernel: ACPI: FACS DFFF0000, 0040
Apr  6 16:51:00 master-tux kernel: ACPI: SSDT DFFF7A00, 0544 (r1 PTLTD  POWERNOW        1  LTP        1)
Apr  6 16:51:00 master-tux kernel: ACPI: HPET DFFF7F80, 0038 (r1 GBT    NVDAACPI 42302E31 NVDA       98)
Apr  6 16:51:00 master-tux kernel: ACPI: MCFG DFFF7FC0, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
Apr  6 16:51:00 master-tux kernel: ACPI: APIC DFFF7940, 0098 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
Apr  6 16:51:00 master-tux kernel: No NUMA configuration found
Apr  6 16:51:00 master-tux kernel: Faking a node at 0000000000000000-0000000120000000
Apr  6 16:51:00 master-tux kernel: Bootmem setup node 0 0000000000000000-0000000120000000
Apr  6 16:51:00 master-tux kernel: Zone PFN ranges:
Apr  6 16:51:00 master-tux kernel:   DMA             0 ->     4096
Apr  6 16:51:00 master-tux kernel:   DMA32        4096 ->  1048576
Apr  6 16:51:00 master-tux kernel:   Normal    1048576 ->  1179648
Apr  6 16:51:00 master-tux kernel: Movable zone start PFN for each node
Apr  6 16:51:00 master-tux kernel: early_node_map[3] active PFN ranges
Apr  6 16:51:00 master-tux kernel:     0:        0 ->      159
Apr  6 16:51:00 master-tux kernel:     0:      256 ->   917488
Apr  6 16:51:00 master-tux kernel:     0:  1048576 ->  1179648
Apr  6 16:51:00 master-tux kernel: ACPI: PM-Timer IO Port: 0x1008
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr  6 16:51:00 master-tux kernel: Processor #0 (Bootup-CPU)
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr  6 16:51:00 master-tux kernel: Processor #1
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Apr  6 16:51:00 master-tux kernel: Processor #2
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Apr  6 16:51:00 master-tux kernel: Processor #3
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Apr  6 16:51:00 master-tux kernel: ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Apr  6 16:51:00 master-tux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr  6 16:51:00 master-tux kernel: IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Apr  6 16:51:00 master-tux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr  6 16:51:00 master-tux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr  6 16:51:00 master-tux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Apr  6 16:51:00 master-tux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Apr  6 16:51:00 master-tux kernel: Setting APIC routing to flat
Apr  6 16:51:00 master-tux kernel: ACPI: HPET id: 0x10de8201 base: 0xfeff0000
Apr  6 16:51:00 master-tux kernel: Using ACPI (MADT) for SMP configuration information
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfff3000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000dfff3000 - 00000000e0000000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f8000000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000f8000000 - 00000000fec00000
Apr  6 16:51:00 master-tux kernel: swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Apr  6 16:51:00 master-tux kernel: Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
Apr  6 16:51:00 master-tux kernel: SMP: Allowing 4 CPUs, 0 hotplug CPUs
Apr  6 16:51:00 master-tux kernel: PERCPU: Allocating 42248 bytes of per cpu data
Apr  6 16:51:00 master-tux kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031007
Apr  6 16:51:00 master-tux kernel: Policy zone: Normal
Apr  6 16:51:00 master-tux kernel: Kernel command line: ro root=LABEL=/ rhgb quiet
Apr  6 16:51:00 master-tux kernel: Initializing CPU#0
Apr  6 16:51:00 master-tux kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Apr  6 16:51:00 master-tux kernel: TSC calibrated against HPET
Apr  6 16:51:00 master-tux kernel: Marking TSC unstable due to TSCs unsynchronized
Apr  6 16:51:00 master-tux kernel: time.c: Detected 2210.052 MHz processor.
Apr  6 16:51:00 master-tux kernel: Console: colour VGA+ 80x25
Apr  6 16:51:00 master-tux kernel: console [tty0] enabled
Apr  6 16:51:00 master-tux kernel: Checking aperture...
Apr  6 16:51:00 master-tux kernel: CPU 0: aperture @ 8500000000 size 32 MB
Apr  6 16:51:00 master-tux kernel: Aperture too small (32 MB)
Apr  6 16:51:00 master-tux kernel: No AGP bridge found
Apr  6 16:51:00 master-tux kernel: Your BIOS doesn't leave a aperture memory hole
Apr  6 16:51:00 master-tux kernel: Please enable the IOMMU option in the BIOS setup
Apr  6 16:51:00 master-tux kernel: This costs you 64 MB of RAM
Apr  6 16:51:00 master-tux kernel: Mapping aperture over 65536 KB of RAM @ c000000
Apr  6 16:51:00 master-tux kernel: Memory: 4059868k/4718592k available (2491k kernel code, 133984k reserved, 1390k data, 332k init)
Apr  6 16:51:00 master-tux kernel: SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Apr  6 16:51:00 master-tux kernel: Calibrating delay using timer specific routine.. 4423.41 BogoMIPS (lpj=2211706)
Apr  6 16:51:00 master-tux kernel: Security Framework initialized
Apr  6 16:51:00 master-tux kernel: SELinux:  Initializing.
Apr  6 16:51:00 master-tux kernel: selinux_register_security:  Registering secondary module capability
Apr  6 16:51:00 master-tux kernel: Capability LSM initialized as secondary
Apr  6 16:51:00 master-tux kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Apr  6 16:51:00 master-tux kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Apr  6 16:51:00 master-tux kernel: Mount-cache hash table entries: 256
Apr  6 16:51:00 master-tux kernel: Initializing cgroup subsys ns
Apr  6 16:51:00 master-tux kernel: Initializing cgroup subsys cpuacct
Apr  6 16:51:00 master-tux kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU: L2 Cache: 512K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU 0/0 -> Node 0
Apr  6 16:51:00 master-tux kernel: CPU: Physical Processor ID: 0
Apr  6 16:51:00 master-tux kernel: CPU: Processor Core ID: 0
Apr  6 16:51:00 master-tux kernel: SMP alternatives: switching to UP code
Apr  6 16:51:00 master-tux kernel: ACPI: Core revision 20070126
Apr  6 16:51:00 master-tux kernel: Using local APIC timer interrupts.
Apr  6 16:51:00 master-tux kernel: Detected 12.557 MHz APIC timer.
Apr  6 16:51:00 master-tux kernel: SMP alternatives: switching to SMP code
Apr  6 16:51:00 master-tux kernel: Booting processor 1/4 APIC 0x1
Apr  6 16:51:00 master-tux kernel: Initializing CPU#1
Apr  6 16:51:00 master-tux kernel: Calibrating delay using timer specific routine.. 4420.41 BogoMIPS (lpj=2210208)
Apr  6 16:51:00 master-tux kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU: L2 Cache: 512K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU 1/1 -> Node 0
Apr  6 16:51:00 master-tux kernel: CPU: Physical Processor ID: 0
Apr  6 16:51:00 master-tux kernel: CPU: Processor Core ID: 1
Apr  6 16:51:00 master-tux kernel: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
Apr  6 16:51:00 master-tux kernel: SMP alternatives: switching to SMP code
Apr  6 16:51:00 master-tux kernel: Booting processor 2/4 APIC 0x2
Apr  6 16:51:00 master-tux kernel: Initializing CPU#2
Apr  6 16:51:00 master-tux kernel: Calibrating delay using timer specific routine.. 4420.31 BogoMIPS (lpj=2210156)
Apr  6 16:51:00 master-tux kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU: L2 Cache: 512K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU 2/2 -> Node 0
Apr  6 16:51:00 master-tux kernel: CPU: Physical Processor ID: 0
Apr  6 16:51:00 master-tux kernel: CPU: Processor Core ID: 3
Apr  6 16:51:00 master-tux kernel: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
Apr  6 16:51:00 master-tux kernel: SMP alternatives: switching to SMP code
Apr  6 16:51:00 master-tux kernel: Booting processor 3/4 APIC 0x3
Apr  6 16:51:00 master-tux kernel: Initializing CPU#3
Apr  6 16:51:00 master-tux kernel: Calibrating delay using timer specific routine.. 4420.30 BogoMIPS (lpj=2210150)
Apr  6 16:51:00 master-tux kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU: L2 Cache: 512K (64 bytes/line)
Apr  6 16:51:00 master-tux kernel: CPU 3/3 -> Node 0
Apr  6 16:51:00 master-tux kernel: CPU: Physical Processor ID: 0
Apr  6 16:51:00 master-tux kernel: CPU: Processor Core ID: 2
Apr  6 16:51:00 master-tux kernel: AMD Phenom(tm) 9500 Quad-Core Processor stepping 02
Apr  6 16:51:00 master-tux kernel: Brought up 4 CPUs
Apr  6 16:51:00 master-tux kernel: net_namespace: 120 bytes
Apr  6 16:51:00 master-tux kernel: Time: 14:50:28  Date: 04/06/08
Apr  6 16:51:00 master-tux kernel: NET: Registered protocol family 16
Apr  6 16:51:00 master-tux kernel: No dock devices found.
Apr  6 16:51:00 master-tux kernel: ACPI: bus type pci registered
Apr  6 16:51:00 master-tux kernel: PCI: Using configuration type 1
Apr  6 16:51:00 master-tux kernel: ACPI: Interpreter enabled
Apr  6 16:51:00 master-tux kernel: ACPI: (supports S0 S1 S4 S5)
Apr  6 16:51:00 master-tux kernel: ACPI: Using IOAPIC for interrupt routing
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr  6 16:51:00 master-tux kernel: PCI: Transparent bridge - 0000:00:04.0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *7 9 10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
Apr  6 16:51:00 master-tux kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Apr  6 16:51:00 master-tux kernel: pnp: PnP ACPI init
Apr  6 16:51:00 master-tux kernel: ACPI: bus type pnp registered
Apr  6 16:51:00 master-tux kernel: pnp: PnP ACPI: found 15 devices
Apr  6 16:51:00 master-tux kernel: ACPI: ACPI bus type pnp unregistered
Apr  6 16:51:00 master-tux kernel: usbcore: registered new interface driver usbfs
Apr  6 16:51:00 master-tux kernel: usbcore: registered new interface driver hub
Apr  6 16:51:00 master-tux kernel: usbcore: registered new device driver usb
Apr  6 16:51:00 master-tux kernel: PCI: Using ACPI for IRQ routing
Apr  6 16:51:00 master-tux kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Apr  6 16:51:00 master-tux kernel: NetLabel: Initializing
Apr  6 16:51:00 master-tux kernel: NetLabel:  domain hash size = 128
Apr  6 16:51:00 master-tux kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Apr  6 16:51:00 master-tux kernel: NetLabel:  unlabeled traffic allowed by default
Apr  6 16:51:00 master-tux kernel: DMAR:No DMAR devices found
Apr  6 16:51:00 master-tux kernel: PCI-DMA: Disabling AGP.
Apr  6 16:51:00 master-tux kernel: PCI-DMA: aperture base @ c000000 size 65536 KB
Apr  6 16:51:00 master-tux kernel: PCI-DMA: using GART IOMMU.
Apr  6 16:51:00 master-tux kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Apr  6 16:51:00 master-tux kernel: hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
Apr  6 16:51:00 master-tux kernel: hpet0: 3 32-bit timers, 25000000 Hz
Apr  6 16:51:00 master-tux kernel: Time: hpet clocksource has been installed.
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1000-0x107f has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1080-0x10ff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1400-0x147f has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1480-0x14ff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1800-0x187f has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: ioport range 0x1880-0x18ff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:01: iomem range 0x0-0x0 could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:02: ioport range 0x4d0-0x4d1 has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:02: ioport range 0x800-0x87f has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:02: ioport range 0x295-0x314 has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:02: ioport range 0x290-0x294 has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:0d: iomem range 0xf0000000-0xf7ffffff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xf0000-0xf3fff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xf4000-0xf7fff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xdfff0000-0xdfffffff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0x0-0x9ffff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0x100000-0xdffeffff could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0x0-0x0 could not be reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xfec00000-0xfec00fff has been reserved
Apr  6 16:51:00 master-tux kernel: system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
Apr  6 16:51:00 master-tux kernel: PCI: Bridge: 0000:00:04.0
Apr  6 16:51:00 master-tux kernel:   IO window: 9000-9fff
Apr  6 16:51:00 master-tux kernel:   MEM window: fc000000-fc0fffff
Apr  6 16:51:00 master-tux kernel:   PREFETCH window: disabled.
Apr  6 16:51:00 master-tux kernel: PCI: Bridge: 0000:00:09.0
Apr  6 16:51:00 master-tux kernel:   IO window: a000-afff
Apr  6 16:51:00 master-tux kernel:   MEM window: f8000000-fbffffff
Apr  6 16:51:00 master-tux kernel:   PREFETCH window: e0000000-efffffff
Apr  6 16:51:00 master-tux kernel: NET: Registered protocol family 2
Apr  6 16:51:00 master-tux kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  6 16:51:00 master-tux kernel: TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Apr  6 16:51:00 master-tux kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr  6 16:51:00 master-tux kernel: TCP: Hash tables configured (established 524288 bind 65536)
Apr  6 16:51:00 master-tux kernel: TCP reno registered
Apr  6 16:51:00 master-tux kernel: checking if image is initramfs... it is
Apr  6 16:51:00 master-tux kernel: Freeing initrd memory: 3188k freed
Apr  6 16:51:00 master-tux kernel: audit: initializing netlink socket (disabled)
Apr  6 16:51:00 master-tux kernel: audit(1207493427.622:1): initialized
Apr  6 16:51:00 master-tux kernel: Total HugeTLB memory allocated, 0
Apr  6 16:51:00 master-tux kernel: VFS: Disk quotas dquot_6.5.1
Apr  6 16:51:00 master-tux kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr  6 16:51:00 master-tux kernel: ksign: Installing public key data
Apr  6 16:51:00 master-tux kernel: Loading keyring
Apr  6 16:51:00 master-tux kernel: - Added public key 3866953E5733719F
Apr  6 16:51:00 master-tux kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Apr  6 16:51:00 master-tux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr  6 16:51:00 master-tux kernel: io scheduler noop registered
Apr  6 16:51:00 master-tux kernel: io scheduler anticipatory registered
Apr  6 16:51:00 master-tux kernel: io scheduler deadline registered
Apr  6 16:51:00 master-tux kernel: io scheduler cfq registered (default)
Apr  6 16:51:00 master-tux kernel: assign_interrupt_mode Found MSI capability
Apr  6 16:51:00 master-tux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  6 16:51:00 master-tux kernel: Real Time Clock Driver v1.12ac
Apr  6 16:51:00 master-tux kernel: Non-volatile memory driver v1.2
Apr  6 16:51:00 master-tux kernel: Linux agpgart interface v0.102
Apr  6 16:51:00 master-tux kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Apr  6 16:51:00 master-tux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  6 16:51:00 master-tux kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr  6 16:51:00 master-tux kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr  6 16:51:00 master-tux kernel: 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr  6 16:51:00 master-tux kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Apr  6 16:51:00 master-tux kernel: input: Macintosh mouse button emulation as /class/input/input0
Apr  6 16:51:00 master-tux kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Apr  6 16:51:00 master-tux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  6 16:51:00 master-tux kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  6 16:51:00 master-tux kernel: mice: PS/2 mouse device common for all mice
Apr  6 16:51:00 master-tux kernel: input: AT Translated Set 2 keyboard as /class/input/input1
Apr  6 16:51:00 master-tux kernel: cpuidle: using governor ladder
Apr  6 16:51:00 master-tux kernel: cpuidle: using governor menu
Apr  6 16:51:00 master-tux kernel: usbcore: registered new interface driver hiddev
Apr  6 16:51:00 master-tux kernel: usbcore: registered new interface driver usbhid
Apr  6 16:51:00 master-tux kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Apr  6 16:51:00 master-tux kernel: TCP cubic registered
Apr  6 16:51:00 master-tux kernel: Initializing XFRM netlink socket
Apr  6 16:51:00 master-tux kernel: NET: Registered protocol family 1
Apr  6 16:51:00 master-tux kernel: NET: Registered protocol family 17
Apr  6 16:51:00 master-tux kernel: powernow-k8: Found 1 AMD Phenom(tm) 9500 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
Apr  6 16:51:00 master-tux kernel: powernow-k8:    0 : fid 0x0 did 0x0 (2200 MHz)
Apr  6 16:51:00 master-tux kernel: powernow-k8:    1 : fid 0x0 did 0x0 (1100 MHz)
Apr  6 16:51:00 master-tux kernel: registered taskstats version 1
Apr  6 16:51:00 master-tux kernel:   Magic number: 4:708:838
Apr  6 16:51:00 master-tux kernel: Freeing unused kernel memory: 332k freed
Apr  6 16:51:00 master-tux kernel: Write protecting the kernel read-only data: 1080k
Apr  6 16:51:00 master-tux kernel: logips2pp: Detected unknown logitech mouse model 101
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
Apr  6 16:51:00 master-tux kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
Apr  6 16:51:00 master-tux kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Apr  6 16:51:00 master-tux kernel: ehci_hcd 0000:00:02.1: debug port 1
Apr  6 16:51:00 master-tux kernel: ehci_hcd 0000:00:02.1: irq 23, io mem 0xfc102000
Apr  6 16:51:00 master-tux kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Apr  6 16:51:00 master-tux kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  6 16:51:00 master-tux kernel: hub 1-0:1.0: USB hub found
Apr  6 16:51:00 master-tux kernel: hub 1-0:1.0: 10 ports detected
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
Apr  6 16:51:00 master-tux kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
Apr  6 16:51:00 master-tux kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Apr  6 16:51:00 master-tux kernel: ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc103000
Apr  6 16:51:00 master-tux kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  6 16:51:00 master-tux kernel: hub 2-0:1.0: USB hub found
Apr  6 16:51:00 master-tux kernel: hub 2-0:1.0: 10 ports detected
Apr  6 16:51:00 master-tux kernel: USB Universal Host Controller Interface driver v3.0
Apr  6 16:51:00 master-tux kernel: SCSI subsystem initialized
Apr  6 16:51:00 master-tux kernel: Driver 'sd' needs updating - please use bus_type methods
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
Apr  6 16:51:00 master-tux kernel: ACPI: PCI interrupt for device 0000:00:08.0 disabled
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:08.1[b] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
Apr  6 16:51:00 master-tux kernel: ACPI: PCI interrupt for device 0000:00:08.1 disabled
Apr  6 16:51:00 master-tux kernel: usb 1-5: new high speed USB device using ehci_hcd and address 2
Apr  6 16:51:00 master-tux kernel: input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
Apr  6 16:51:00 master-tux kernel: usb 1-5: configuration #1 chosen from 1 choice
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
Apr  6 16:51:00 master-tux kernel: scsi0 : sata_nv
Apr  6 16:51:00 master-tux kernel: scsi1 : sata_nv
Apr  6 16:51:00 master-tux kernel: ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 21
Apr  6 16:51:00 master-tux kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 21
Apr  6 16:51:00 master-tux kernel: ata1: SATA link down (SStatus 0 SControl 300)
Apr  6 16:51:00 master-tux kernel: ata2: SATA link down (SStatus 0 SControl 300)
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:00:08.1[b] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
Apr  6 16:51:00 master-tux kernel: scsi2 : sata_nv
Apr  6 16:51:00 master-tux kernel: scsi3 : sata_nv
Apr  6 16:51:00 master-tux kernel: ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xdc00 irq 20
Apr  6 16:51:00 master-tux kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xdc08 irq 20
Apr  6 16:51:00 master-tux kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 16:51:00 master-tux kernel: ata3.00: HPA detected: current 156299375, native 156301488
Apr  6 16:51:00 master-tux kernel: ata3.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
Apr  6 16:51:00 master-tux kernel: ata3.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
Apr  6 16:51:00 master-tux kernel: ata3.00: configured for UDMA/133
Apr  6 16:51:00 master-tux kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 16:51:00 master-tux kernel: ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
Apr  6 16:51:00 master-tux kernel: ata4.00: configured for UDMA/100
Apr  6 16:51:00 master-tux kernel: scsi 2:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] Write Protect is off
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] Write Protect is off
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 16:51:00 master-tux kernel:  sda: sda1 sda2
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Apr  6 16:51:00 master-tux kernel: scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB00 PQ: 0 ANSI: 5
Apr  6 16:51:00 master-tux kernel: scsi4 : pata_amd
Apr  6 16:51:00 master-tux kernel: scsi5 : pata_amd
Apr  6 16:51:00 master-tux kernel: ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
Apr  6 16:51:00 master-tux kernel: ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Apr  6 16:51:00 master-tux kernel: kjournald starting.  Commit interval 5 seconds
Apr  6 16:51:00 master-tux kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr  6 16:51:00 master-tux kernel: SELinux:  Disabled at runtime.
Apr  6 16:51:00 master-tux kernel: audit(1207493438.855:2): selinux=0 auid=4294967295
Apr  6 16:51:00 master-tux kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Apr  6 16:51:00 master-tux kernel: scsi 3:0:0:0: Attached scsi generic sg1 type 5
Apr  6 16:51:00 master-tux kernel: Initializing USB Mass Storage driver...
Apr  6 16:51:00 master-tux kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Apr  6 16:51:00 master-tux kernel: usbcore: registered new interface driver usb-storage
Apr  6 16:51:00 master-tux kernel: USB Mass Storage support registered.
Apr  6 16:51:00 master-tux kernel: input: PC Speaker as /class/input/input3
Apr  6 16:51:00 master-tux kernel: Floppy drive(s): fd0 is 1.44M
Apr  6 16:51:00 master-tux kernel: FDC 0 is a post-1991 82077
Apr  6 16:51:00 master-tux kernel: Driver 'sr' needs updating - please use bus_type methods
Apr  6 16:51:00 master-tux kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
Apr  6 16:51:00 master-tux kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
Apr  6 16:51:00 master-tux kernel: sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Apr  6 16:51:00 master-tux kernel: Uniform CD-ROM driver Revision: 3.20
Apr  6 16:51:00 master-tux kernel: input: Power Button (FF) as /class/input/input4
Apr  6 16:51:00 master-tux kernel: ACPI: Power Button (FF) [PWRF]
Apr  6 16:51:00 master-tux kernel: input: Power Button (CM) as /class/input/input5
Apr  6 16:51:00 master-tux kernel: ACPI: Power Button (CM) [PWRB]
Apr  6 16:51:00 master-tux kernel: nvidia: module license 'NVIDIA' taints kernel.
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
Apr  6 16:51:00 master-tux kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
Apr  6 16:51:00 master-tux kernel: 8139too Fast Ethernet driver 0.9.28
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
Apr  6 16:51:00 master-tux kernel: eth0: RealTek RTL8139 at 0xffffc2000107a000, 00:1b:11:f1:27:04, IRQ 19
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Apr  6 16:51:00 master-tux kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
Apr  6 16:51:00 master-tux kernel: NET: Registered protocol family 10
Apr  6 16:51:00 master-tux kernel: lo: Disabled Privacy Extensions
Apr  6 16:51:00 master-tux kernel: scsi 6:0:0:0: Direct-Access     WD       5000AAV External 1.65 PQ: 0 ANSI: 4
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] Write Protect is off
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] Write Protect is off
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Apr  6 16:51:00 master-tux kernel:  sdb: sdb1
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: [sdb] Attached SCSI disk
Apr  6 16:51:00 master-tux kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Apr  6 16:51:00 master-tux kernel: device-mapper: uevent: version 1.0.3
Apr  6 16:51:00 master-tux kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Apr  6 16:51:00 master-tux kernel: device-mapper: multipath: version 1.0.5 loaded
Apr  6 16:51:00 master-tux kernel: EXT3 FS on sda1, internal journal
Apr  6 16:51:00 master-tux kernel: kjournald starting.  Commit interval 5 seconds
Apr  6 16:51:00 master-tux kernel: EXT3 FS on sda2, internal journal
Apr  6 16:51:00 master-tux kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr  6 16:51:00 master-tux kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Apr  6 16:51:00 master-tux kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Apr  6 16:51:00 master-tux kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr  6 16:51:00 master-tux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr  6 16:51:00 master-tux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Apr  6 16:51:00 master-tux kernel: RPC: Registered udp transport module.
Apr  6 16:51:00 master-tux kernel: RPC: Registered tcp transport module.
Apr  6 16:51:00 master-tux kernel: fuse init (API version 7.9)
Apr  6 16:51:00 master-tux auditd[2200]: Started dispatcher: /sbin/audispd pid: 2202
Apr  6 16:51:00 master-tux kernel: audit(1207493460.659:3): audit_pid=2200 old=0 by auid=4294967295
Apr  6 16:51:00 master-tux auditd[2200]: Init complete, auditd 1.6.8 listening for events (startup state enable)
Apr  6 16:51:00 master-tux audispd: af_unix plugin initialized
Apr  6 16:51:00 master-tux audispd: audispd initialized with q_depth=64 and 1 active plugins
Apr  6 16:51:01 master-tux automount[2238]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Apr  6 16:51:01 master-tux acpid: starting up
Apr  6 16:51:01 master-tux hcid[2265]: Bluetooth HCI daemon
Apr  6 16:51:02 master-tux kernel: Bluetooth: Core ver 2.11
Apr  6 16:51:02 master-tux kernel: NET: Registered protocol family 31
Apr  6 16:51:02 master-tux kernel: Bluetooth: HCI device and connection manager initialized
Apr  6 16:51:02 master-tux kernel: Bluetooth: HCI socket layer initialized
Apr  6 16:51:02 master-tux hcid[2265]: Starting SDP server
Apr  6 16:51:02 master-tux kernel: Bluetooth: L2CAP ver 2.9
Apr  6 16:51:02 master-tux kernel: Bluetooth: L2CAP socket layer initialized
Apr  6 16:51:02 master-tux hcid[2265]: Created local server at unix:abstract=/var/run/dbus-rBGAOw5Pat,guid=6313e935d98584a178978b0047f8e356
Apr  6 16:51:02 master-tux kernel: Bluetooth: RFCOMM socket layer initialized
Apr  6 16:51:02 master-tux kernel: Bluetooth: RFCOMM TTY layer initialized
Apr  6 16:51:02 master-tux kernel: Bluetooth: RFCOMM ver 1.8
Apr  6 16:51:02 master-tux input[2292]: Bluetooth Input daemon
Apr  6 16:51:02 master-tux input[2292]: Registered input manager path:/org/bluez/input
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Found user 'avahi' (UID 498) and group 'avahi' (GID 494).
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Successfully dropped root privileges.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: avahi-daemon 0.6.21 starting up.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Successfully called chroot().
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Successfully dropped remaining capabilities.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Loading service file /services/ssh.service.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.3.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: New relevant interface eth0.IPv4 for mDNS.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Network interface enumeration completed.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Registering new address record for fe80::21b:11ff:fef1:2704 on eth0.*.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Registering new address record for 192.168.1.3 on eth0.IPv4.
Apr  6 16:51:03 master-tux avahi-daemon[2454]: Registering HINFO record with values 'X86_64'/'LINUX'.
Apr  6 16:51:04 master-tux avahi-daemon[2454]: Server startup complete. Host name is master-tux.local. Local service cookie is 1197262792.
Apr  6 16:51:05 master-tux avahi-daemon[2454]: Service "master-tux" (/services/ssh.service) successfully established.
Apr  6 16:51:06 master-tux acpid: client connected from 2523[68:68]
Apr  6 16:51:32 master-tux pcscd: winscard.c:219:SCardConnect() Reader E-Gate 0 0 Not Found
Apr  6 16:51:32 master-tux pcscd:last message repeated 3 times
Apr  6 16:51:32 master-tux acpid: client connected from 2702[0:0]
Apr  6 16:51:33 master-tux acpid: client connected from 2702[0:0]
Apr  6 16:51:38 master-tux gconfd (slide-2779): démarrage (version 2.20.1), pid 2779 utilisateur « slide »
Apr  6 16:51:38 master-tux gconfd (slide-2779): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Apr  6 16:51:38 master-tux gconfd (slide-2779): Adresse « xml:readwrite:/home/slide/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Apr  6 16:51:38 master-tux gconfd (slide-2779): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Apr  6 16:51:42 master-tux hcid[2265]: Default passkey agent (:1.15, /org/bluez/passkey) registered
Apr  6 16:51:42 master-tux hcid[2265]: Default authorization agent (:1.15, /org/bluez/auth) registered
Apr  6 16:51:42 master-tux kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Apr  6 16:51:42 master-tux hald: mounted /dev/sdb1 on behalf of uid 500
Apr  6 16:51:43 master-tux hald: mounted /dev/sr0 on behalf of uid 500
Apr  6 16:51:51 master-tux gconfd (slide-2779): Adresse « xml:readwrite:/home/slide/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
Apr  6 16:58:30 master-tux yum: Installed: wine-core - 0.9.58-1.fc8.i386
Apr  6 16:58:30 master-tux yum: Installed: wine-cms - 0.9.58-1.fc8.i386
Apr  6 16:58:31 master-tux yum: Installed: wine-nas - 0.9.58-1.fc8.i386
Apr  6 16:58:31 master-tux yum: Installed: wine-jack - 0.9.58-1.fc8.i386
Apr  6 16:58:31 master-tux yum: Installed: wine-twain - 0.9.58-1.fc8.i386
Apr  6 16:58:32 master-tux yum: Installed: wine-capi - 0.9.58-1.fc8.i386
Apr  6 16:58:33 master-tux yum: Installed: wine-tools - 0.9.58-1.fc8.i386
Apr  6 16:58:33 master-tux yum: Installed: wine-esd - 0.9.58-1.fc8.i386
Apr  6 16:58:33 master-tux yum: Installed: wine-ldap - 0.9.58-1.fc8.i386
Apr  6 16:58:33 master-tux yum: Installed: wine - 0.9.58-1.fc8.i386
pmarion wrote:Est-ce que tu tiens aux données sur ce disque externe ?
non justement mais un rm de ces fichiers me donne les même msg
Tu peux essayer de formater avec mkfs /dev/xxy (sans te tromper de device), mais ce n'est qu'un formattage logique(il n'y aura pas d'écriture physique sur toute la partition), mais cela va effacer tes fichiers.
Ensuite essaie
dd if=/dev/xxy of=/dev/null
La commande dd va lire toute la partition de façon continue, cela ne vaut pas un test aléatoire, mais on pourra déjà voir. 
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Ce message dans /var/log/messages est étrange et pourrait expliquer des incohérences . A 16H51 cela correspond vraisemblable à un boot, pour confirmer il faudrait
faire un 'unmount /dev/xxy' puis un 'mount /dev/xxy' et un 'tail /var/log/messages'.
Puis un ls provoquant une erreur puis un 'tail /var/log/messages'
pmarion wrote:Tu peux essayer de formater avec mkfs /dev/xxy (sans te tromper de device), mais ce n'est qu'un formattage logique(il n'y aura pas d'écriture physique sur toute la partition), mais cela va effacer tes fichiers.
Ensuite essaie
dd if=/dev/xxy of=/dev/null
La commande dd va lire toute la partition de façon continue, cela ne vaut pas un test aléatoire, mais on pourra déjà voir. 
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Ce message dans /var/log/messages est étrange et pourrait expliquer des incohérences . A 16H51 cela correspond vraisemblable à un boot, pour confirmer il faudrait
faire un 'unmount /dev/xxy' puis un 'mount /dev/xxy' et un 'tail /var/log/messages'.
Puis un ls provoquant une erreur puis un 'tail /var/log/messages'
sur le DD j'ai des données importantes donc je ne m'aventurarais pas à formatter : je reçois deux DD de remplacement mardi, mais j'aimerais bien comprendre
Salut.

Renvoie le résultat de : 
# fdisk -l
# mount
pour retrouver ce DD externe...

++
Pour avoir plus de renseignements sur le disque en question, il faut reprovoquer le problème du 'ls' et regarder la fin du fichier /var/log/messages.
Un fdisk -l retourne 
Disque /dev/sdb: 500.1 Go, 500107862016 octets
255 heads, 63 sectors/track, 60801 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc4562d71

Périphérique Amorce    Début         Fin      Blocs    Id  Système
/dev/sdb1               1       60802   488386552+  83  Linux
et un mount me répond
/dev/sdb1 on /media/disk type ext2 (rw,nosuid,nodev,uhelper=hal)
globilux wrote:sur le DD j'ai des données importantes donc je ne m'aventurarais pas à formatter : je reçois deux DD de remplacement mardi, mais j'aimerais bien comprendre
'/var/log/messages' te renvoit les messages du noyau. Il faut consulter ce fichier juste après avoir fait un 'ls' comme d'ailleurs l'a fait remarquer pmarion:
pmarion wrote:Pour avoir plus de renseignements sur le disque en question, il faut reprovoquer le problème du 'ls' et regarder la fin du fichier /var/log/messages.
Ca aidera au moins à une ébauche de diagnostic, à trouver une piste à suivre.

EDIT : Et arretes de dépenser tout ton argent dans toutes tes manips! Ce disque dur aurait pu te survivre! :-P
Il y a un DD de 500 Go vu sous /media/disk.

Que donne : 
# ls  /media/disk
++
aka Shiva wrote:'/var/log/messages' te renvoit les messages du noyau. Il faut consulter ce fichier juste après avoir fait un 'ls' comme d'ailleurs l'a fait remarquer pmarion:
si tu ve j'ai donné le contenu du fichier dans le thread (au dessus)
pmarion wrote:EDIT : Et arretes de dépenser tout ton argent dans toutes tes manips! Ce disque dur aurait pu te survivre! :-P
???
eddy33 wrote:ls /media/disk
cette commande me retourne
ls: ne peut accéder /media/disk/dvd1: Erreur d'entrée/sortie
ls: ne peut accéder /media/disk/dvd2: Erreur d'entrée/sortie
dvd1
dvd2
Apparemment tu n'as plus d'interpréteur sur ce disque, il doit y avoir un problème de système de fichier...tu pourrais tenter d'y accéder via un LiveCD?

PS: je disais ça pour te taquiner puisque tu te serais empressé de te procurer deux autres disques...🙂
aka Shiva wrote:Apparemment tu n'as plus d'interpréteur sur ce disque, il doit y avoir un problème de système de fichier...tu pourrais tenter d'y accéder via un LiveCD?

PS: je disais ça pour te taquiner puisque tu te serais empressé de te procurer deux autres disques...🙂
😉 la commande était déjà passées djà passée avant que ce problème survienne
Pour moi, c'est ok, puisque je vois un fichier plan.odt, un répertoire Série...
Renvoie plutôt : 
# ls -l /media/disk
Il y a un problème d'accès aux répertoires, fichiers, périphérique (?) dvd1 et dvd2. C'est d'ailleurs sûrement normal.

++
ls -l /media/disk
me retourne 
total 3063116

drwxr-xr-x   2 slide admin      4096 avr  3 23:35 BW
-?????????   ? ?     ?             ?            ? dvd1
-?????????   ? ?     ?             ?            ? dvd2
PS : slide est mon pseudo et j'appartient au groupe admin (entre autres)
D'après ce qui est affiché, le filesystème est tellement perturbé que même le répertoire racine de la partition est incohérent.
Il faut refaire un mkfs (donc perte des données, et reformatage logique). Mais ensuite, il fudra faire des tests pour évaluer le fonctionnement du disque.

PS @globilux je n'ai jamais rien dit sur ta façon de dépenser ton argent.
Salut.
tu as 2 inoeuds (inode) vérolés dans le système de fichiers...

++
pmarion wrote:@globilux je n'ai jamais rien dit sur ta façon de dépenser ton argent.
je sais, mais la remarque que ta faites a été tourné de el manière à ce qu'elle puisse vexer les personnes
eddy33 wrote:tu as 2 inoeuds (inode) vérolés dans le système de fichiers...
et comment les déveroler sans perdre les données ?
@globilux : mais regarde l'historique je n'ai pas parlé d'argent du tout bien ou mal tourné !
globilux wrote:comment les déveroler sans perdre les données ?
un fsck va peut être pouvoir réparer ou mettra dans le pire des cas les inodes dans 'lost+found'
pmarion wrote:un fsck
oki merci
pmarion wrote:@globilux : mais regarde l'historique je n'ai pas parlé d'argent du tout bien ou mal tourné !
quoi ?
pmarion wrote:EDIT : Et arretes de dépenser tout ton argent dans toutes tes manips! Ce disque dur aurait pu te survivre! :-P