voila plus précisement le message que j'obtiens:
ata4 status {DRDY}
ata4 revalidation failed errno=-5
ata 4 SRST failed errno=-16
.......
pour la commande
dmesg |grep ata
J'obtiens :
PERCPU: Allocating 42248 bytes of per cpu data
Memory: 3221776k/3276288k available (2492k kernel code, 54124k reserved, 1390k data, 332k init)
ksign: Installing public key data
Write protecting the kernel read-only data: 1080k
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATA-7: Maxtor 6V250F0, VA111900, max UDMA/133
ata3.01: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata4.00: ATA-6: Config Disk, RGL10364, max UDMA/133
ata4.00: 640 sectors, multi 1: LBA
ata4.00: Drive reports diagnostics failure. This may indicate a drive
ata4.00: fault or invalid emulation. Contact drive vendor for information.
ata4.00: device is on DMA blacklist, disabling DMA
ata4.00: configured for PIO4
sdc:<3>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata4.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
ata4.00: status: { DRDY }
ata4: soft resetting link
ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata4.00: revalidation failed (errno=-5)
ata4: failed to recover some devices, retrying in 5 secs
ata4: soft resetting link
ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
ata4.00: revalidation failed (errno=-5)
ata4: failed to recover some devices, retrying in 5 secs
ata4: soft resetting link
ata4: port is slow to respond, please be patient (Status 0xd0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: port is slow to respond, please be patient (Status 0xd0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: port is slow to respond, please be patient (Status 0xd0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: SRST failed (errno=-16)
ata4: reset failed, giving up
ata4.00: disabled
ata4: EH complete
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata5: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
ata6: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
ata5.01: ATAPI: DVDR PX-750A, 1.02, max UDMA/66
ata5.01: configured for UDMA/66
ata7: SATA max UDMA/133 abar m8192@0xfa7fe000 port 0xfa7fe100 irq 17
ata8: SATA max UDMA/133 abar m8192@0xfa7fe000 port 0xfa7fe180 irq 17
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs: mounted filesystem with ordered data mode.
Merci pour votre aide
