Voilà le message d'erreur tant attendu :
[root@localhost guest]# smartctl -l error /dev/sda
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 17350 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17350 occurred at disk power-on lifetime: 9844 hours (410 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:30:11.333 IDENTIFY DEVICE
25 00 08 86 be 06 e0 00 00:30:08.250 READ DMA EXT
27 00 00 00 00 00 e0 00 00:30:08.249 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:30:08.246 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:30:08.243 SET FEATURES [Set transfer mode]
Error 17349 occurred at disk power-on lifetime: 9844 hours (410 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:30:08.132 IDENTIFY DEVICE
25 00 08 86 be 06 e0 00 00:30:05.043 READ DMA EXT
27 00 00 00 00 00 e0 00 00:30:05.042 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:30:05.039 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:30:05.036 SET FEATURES [Set transfer mode]
Error 17348 occurred at disk power-on lifetime: 9844 hours (410 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:30:04.924 IDENTIFY DEVICE
25 00 08 86 be 06 e0 00 00:30:01.834 READ DMA EXT
27 00 00 00 00 00 e0 00 00:30:01.833 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:30:01.830 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:30:01.827 SET FEATURES [Set transfer mode]
Error 17347 occurred at disk power-on lifetime: 9844 hours (410 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:30:01.715 IDENTIFY DEVICE
25 00 08 86 be 06 e0 00 00:29:58.633 READ DMA EXT
27 00 00 00 00 00 e0 00 00:29:58.632 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:29:58.629 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:29:58.626 SET FEATURES [Set transfer mode]
Error 17346 occurred at disk power-on lifetime: 9844 hours (410 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 50 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 00 00:29:58.514 IDENTIFY DEVICE
25 00 08 86 be 06 e0 00 00:29:55.431 READ DMA EXT
27 00 00 00 00 00 e0 00 00:29:55.430 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:29:55.427 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:29:55.422 SET FEATURES [Set transfer mode]
D'après le site de eddy, le nombre d'erreurs serait colossale mais le disque pourrait toujours fonctionner. Que faire ? Le changer ? Faire une réinstallation ? Tenter une dernière tentative de survie ?
Merco en tout casn votre aide aura été précieuse. 😉
