écran noir ati x1650 pilote proprio

Jjulientavu · 21 janv. 2008

Bonjour ,
FC8 fraichement installée, toutes mises à jour effectuées. ati X1650 pro en AGP. (la carte est neuve, de chez sapphire)
fonctionnement ok (malgré résolution pas maximale , et aspect baveux) avec pilote vesa.
J'ai installé les pilotes proprio ati en suivant la démarche expliquée sur le site, par le dépot livna , livna-config par la suite. (aiglx, et composite)

au REdémarrage , tout ok dans la séquence "afficher les détails" des daemons , puis après HAL ok , au moment d'arriver sur l'écran de login , pouf, écran noir.
Impossible de retrouver un terminal par alt + Fn (n= 1 à 6).
obligé de rebooter comme un sale avec le bouton façade de la tour.

Même problème sous ubuntu 7.10 , par l'install des pilotes méthode ubuntu , ou par envy.

Comment m'en sortir ?

( au passage : comment démmarer en runlevel 1 sous Fedora , quelle instruction donner à grub ?)

VINDICATORs · 21 janv. 2008

tape ctrl+alt+F1! ensuite "vi /etc/xorg.conf" et tape sur la touche "i" et édite là où ce trouve "fglrx" et remplace le par "vesa", tape ensuite sur la touche shift et 2x sur Z en maintenant la touche shift enfoncé! ensuite un "gdm-restart && exit"!

Est ce que tu a un écran wide? car les pilotes version 8.44.xx/Catalyst 7.12 déconne avec les résolution wide (voir sujet épinglé tout en haut de la même section que ton sujet!).

D'ici peut vas sortir la version des catalyst 8.01 (fglrx 8.45.xx) qui corrige pas mal de petit problèmes (toujours voir le sujet épinglé tout en haut!) avec les wides!

Chacual · 21 janv. 2008

Quand tu démarres ta machine, l'affichage est bien en mode graphique si tu dois cliquer sur Détails, non ?

Tu devrais poster le contenu de quelques fichiers journaux : /var/log/messages, /var/log/xorg.0.log

Au passage, pour démarrer en level 1, il me semble que tu as juste à ajouter un 1 à la fin de la ligne de boot.

bioinfornatics · 21 janv. 2008

remplace "fglrx" ou "radeon" sa depend.... par vesa

Jjulientavu · 21 janv. 2008

merci pour les réponses rapides.
je n'arrive pas à accéder à un terminal virtuel une fois le problème survenu , ni sous ubuntu , ni sous fedora. La combinaison de touche ne fonctionne pas J'avais bien pensé éditer le xorg.conf avec vi .
C'est pour ça que je voulais savoir comment démarrer en runlevel 1.
j'ai un écran wide, mais j'ai pas mis une résolution wide ... je suis en 1280x1024 je crois , pas en 1680 en tout cas.
pour le post des logs il faudrait que j'ai accès à un terminal au moins , et là je ne l'ai plus. je vais essayer de booter sur le dvd d'install, il me semble que sur les anciennes versions on pouvait booter une partition comme ça.

Ah , je précise, c'est pas pour tourner avec le pilote vesa que je viens chercher de l'aide, mais bien pour avoir l'accélération 3D ( pas forcément pour compiz , mais pour aller fragger sous wolfenstein !!)

bioinfornatics · 21 janv. 2008

quand tu es sur l'écran noire
tape root
entrer
ton mot de passe
entrer
vi /ect/X11/xorg.conf
....

Jjulientavu · 21 janv. 2008

vous auriez pas une solution plus propre qu'éditer à l'aveugle un fichier ?

j'ai réussi à démarrer en runlevel 1 ( éditer le grub , ajouter single à la fin de la ligne kernel , puis booter ).Désactivé le composite dans le xorg.conf en passant les # qui vont bien, puis démarré X , je retombe sur l'écran noir.
Je vais poster les logs depuis ma bécanne sous linux

bioinfornatics · 21 janv. 2008

tu as bien mis vesa?
puis tu as essayé de faire init 5

Jjulientavu · 21 janv. 2008

ça fait 2 fois que je change fglrx en vesa, et que je passe en init 5 ...et là toujours écran noir !
surprise, il doit y avoir une config automatique au démarrage du runlevel 5 qui réécrit le xorg.conf , puisque là je viens de vérifier, les modifs que j'ai fait qu xorg ne sont pas restées (j'ai même effacé le xorg , pour en mettre un que j'avais gardé de côté juste avant d'installer les pilotes).
c'est bien ça : ldconfig . Je suis donc repassé par un init 3 , remodifié le xorg;conf ( que je venais juste de modifier en runlevel1) , pour mettre vesa.
puis startx depuis mon bash utilisateur.
Là je suis sous X maintenant .

les logs ( quand tentative de démarrage avec pilotes proprio , et écran noir, puisque c'est bien le problème qui m'intéresse )

Xorg log

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Fedora 8 Red Hat, Inc.
Current Operating System: Linux tour-ubuntu 2.6.23.9-85.fc8 #1 SMP Fri Dec 7 15:49:59 EST 2007 i686
Build Date: 13 December 2007
Build ID: xorg-x11-server 1.3.0.0-37.fc8 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 21 15:36:22 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Videocard0"
(WW) No monitor specified for screen "Screen0".
    Using a default monitor configuration.
(**) |-->Input Device "Keyboard0"
(==) |-->Input Device "<default pointer>"
(WW) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
(==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
(==) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AIGLX" "on"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x820bd60
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80f2 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1043,80f3 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,71c1 card 174b,0850 rev 9e class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,71e1 card 174b,0851 rev 9e class 03,80,00 hdr 00
(II) PCI: 02:05:0: chip 11ab,4320 card 1043,811a rev 13 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
    [0] -1    0    0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
    [0] -1    0    0xfe900000 - 0xfe9fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
    [0] -1    0    0xdbf00000 - 0xfbefffff (0x20000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
    [0] -1    0    0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
    [0] -1    0    0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x71c1) rev 158, Mem @ 0xe0000000/28, 0xfe9f0000/16, I/O @ 0xc000/8, BIOS @ 0xfe9c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x71e1) rev 158, Mem @ 0xfe9e0000/16
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xfc000000 from 0xfdffffff to 0xfbffffff
(II) Active PCI resource ranges:
    [0] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [1] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [2] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [3] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [4] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [5] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [6] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [7] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [8] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [10] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [11] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [12] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [13] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [14] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [15] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [16] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [17] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [18] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [19] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [20] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [21] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [22] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [23] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [1] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [2] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [3] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [4] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [5] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [6] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [7] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [8] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [9] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [10] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [11] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [12] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [13] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [14] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [15] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [16] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [17] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [18] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [19] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [20] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [21] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [22] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [23] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
    [0] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [5] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [6] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [7] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [8] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [9] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [10] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [11] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [12] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [13] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [17] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [18] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [19] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [20] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [21] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [22] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [26] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [27] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [28] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [29] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules//fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules//extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules//extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules//drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.44.3
    Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.44.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.443.1                  
(II) ATI Proprietary Linux Driver Build Date: Dec 19 2007 21:29:14
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x71C1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [5] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [6] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [7] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [8] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [9] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [10] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [11] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [12] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [13] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [15] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [16] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [17] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [18] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [19] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [20] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [21] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [22] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [24] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [25] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [26] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [27] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [28] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [29] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x890fd10
(II) resource ranges after probing:
    [0] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [5] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [6] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [7] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [8] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [9] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [10] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [11] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [12] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [13] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [14] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [15] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [16] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [17] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [18] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [19] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [20] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [21] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [22] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [23] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [24] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [25] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [26] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [27] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [28] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [29] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [30] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [31] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [32] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
    [33] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [34] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Enabling PCI device
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1650 Series" (Chipset = 0x71c1)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x0850)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RV535
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.44.3
    ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR2
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM  Model: 304  Serial#: 1346712114
(II) fglrx(0): Year: 2007  Week: 49
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 49  vert.: 32
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.639 redY: 0.333   greenX: 0.289 greenY: 0.597
(II) fglrx(0): blueX: 0.153 blueY: 0.082   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 119.0 MHz   Image Size:  494 x 320 mm
(II) fglrx(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: H9XPC00572
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff004c2d040332324550
(II) fglrx(0):     31110103803120782a9345a3554a9827
(II) fglrx(0):     155054bfef80b30081808140714f0101
(II) fglrx(0):     0101010101017c2e90a0601a1e403020
(II) fglrx(0):     3600ee401100001a000000fd00384b1e
(II) fglrx(0):     510e000a202020202020000000fc0053
(II) fglrx(0):     796e634d61737465720a2020000000ff
(II) fglrx(0):     00483958504330303537320a2020007d
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):   1. 594/398MHz @ 0Hz [enable load balancing]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 31 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"   74.48  1280 1336 1472 1664  720 721 724 746 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   26.71  720 736 808 896  480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x432": 21.1 MHz (scaled from 0.0 MHz), 26.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"   21.07  640 648 712 784  432 433 436 448 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (490, 320) mm
(--) fglrx(0): DPI set to (66, 81)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"   74.48  1280 1336 1472 1664  720 721 724 746 +hsync
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"   96.76  1152 1224 1344 1536  864 865 868 900 +hsync
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.75  1024 1040 1136 1312  768 769 772 800
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"   78.43  1024 1080 1192 1360  768 769 772 801 +hsync
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"   45.50  800 840 920 1040  600 601 604 625 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   26.71  720 736 808 896  480 481 484 497 +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 492 520 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x432": 21.1 MHz (scaled from 0.0 MHz), 26.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"   21.07  640 648 712 784  432 433 436 448 +hsync
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"   28.07  640 696 736 832  400 413 415 449
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"   19.68  512 528 576 632  384 384 385 416
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 601 602 625 doublescan
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   15.75  320 328 360 416  240 481 482 501 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   13.10  320 352 368 416  200 406 407 417 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.3.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.2
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f004a1b bridge: 0x8086/0x2570
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f004b1a
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xfc000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b]
    [1] 0    0    0xe0000000 - 0xefffffff (0x10000000) MX[b]
    [2] -1    0    0x00100000 - 0x2fffffff (0x2ff00000) MX[b]E(B)
    [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1    0    0xfeafc000 - 0xfeafffff (0x4000) MX[b]
    [7] -1    0    0xfebff400 - 0xfebff4ff (0x100) MX[b]
    [8] -1    0    0xfebff800 - 0xfebff9ff (0x200) MX[b]
    [9] -1    0    0x30000000 - 0x300003ff (0x400) MX[b]
    [10] -1    0    0xfebffc00 - 0xfebfffff (0x400) MX[b]
    [11] -1    0    0xfc000000 - 0xfbffffff (0x0) MX[b]O
    [12] -1    0    0xfe9e0000 - 0xfe9effff (0x10000) MX[b](B)
    [13] -1    0    0xfe9c0000 - 0xfe9dffff (0x20000) MX[b](B)
    [14] -1    0    0xfe9f0000 - 0xfe9fffff (0x10000) MX[b](B)
    [15] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
    [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [19] 0    0    0x0000c000 - 0x0000c0ff (0x100) IX[b]
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [22] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[b]
    [23] -1    0    0x0000ee80 - 0x0000eebf (0x40) IX[b]
    [24] -1    0    0x0000e800 - 0x0000e8ff (0x100) IX[b]
    [25] -1    0    0x00000400 - 0x0000041f (0x20) IX[b]
    [26] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [27] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [28] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1    0    0x000001f0 - 0x000001f0 (0x1) IX[b]
    [30] -1    0    0x000001f0 - 0x000001f7 (0x8) IX[b]
    [31] -1    0    0x0000ef80 - 0x0000ef9f (0x20) IX[b]
    [32] -1    0    0x0000ef40 - 0x0000ef5f (0x20) IX[b]
    [33] -1    0    0x0000ef20 - 0x0000ef3f (0x20) IX[b]
    [34] -1    0    0x0000ef00 - 0x0000ef1f (0x20) IX[b]
    [35] -1    0    0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
    [36] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [37] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.44.3
(II) fglrx(0):     Date: Dec 19 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.23.9-85.fc8
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            yes
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 17.
(II) fglrx(0): Exposed events to the /proc interface

dmesg log

Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:59 EST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
 BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
 BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
 BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 130992) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   130992
  HighMem    130992 ->   130992
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   130992
On node 0 totalpages: 130992
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 991 pages used for memmap
  Normal zone: 125905 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FAD60, 0014 (r0 ACPIAM)
ACPI: RSDT 1FFB0000, 0030 (r1 A M I  OEMRSDT  12000513 MSFT       97)
ACPI: FACP 1FFB0200, 0081 (r2 A M I  OEMFACP  12000513 MSFT       97)
ACPI: DSDT 1FFB03F0, 3763 (r1  A0049 A0049000        0 INTL  2002026)
ACPI: FACS 1FFC0000, 0040
ACPI: APIC 1FFB0390, 005C (r1 A M I  OEMAPIC  12000513 MSFT       97)
ACPI: OEMB 1FFC0040, 003F (r1 A M I  OEMBIOS  12000513 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 129969
Kernel command line: ro root=LABEL=/ rhgb quiet single
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2998.648 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 511468k/523968k available (2184k kernel code, 11928k reserved, 1116k data, 280k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
    lowmem  : 0xc0000000 - 0xdffb0000   ( 511 MB)
      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
      .data : 0xc06222f5 - 0xc0739544   (1116 kB)
      .text : 0xc0400000 - 0xc06222f5   (2184 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5999.87 BogoMIPS (lpj=2999938)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07a9000 soft=c0789000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5996.28 BogoMIPS (lpj=2998141)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Total of 2 processors activated (11996.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 14:37:07  Date: 01/21/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  35, should be 2A [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:08: ioport range 0x680-0x6ff has been reserved
pnp: 00:08: ioport range 0x290-0x297 has been reserved
pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0b: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0b: iomem range 0x100000-0x1ffeffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: dbf00000-fbefffff
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: fea00000-feafffff
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2910k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1200926227.462:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4BB254D1F8000763
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 32M @ 0xfc000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
  Magic number: 8:611:637
Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 844k
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfebffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ef00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ef20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ef40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ef80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
usb 2-2: new low speed USB device using uhci_hcd and address 2
ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
ata1.00: 240121728 sectors, multi 16: LBA 
ata1.00: configured for UDMA/133
usb 2-2: configuration #1 chosen from 1 choice
input:   USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-2
input:   USB Keyboard as /class/input/input2
input: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-2
usb 3-1: new low speed USB device using uhci_hcd and address 2
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
usb 3-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120P0   YAR4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors (122942 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L15 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
audit(1200926234.037:2): enforcing=1 old_enforcing=0 auid=4294967295
security:  8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats
security:  67 classes, 213052 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1200926234.387:3): policy loaded auid=4294967295
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sr 1:0:1:0: Attached scsi generic sg2 type 5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
intel_rng: FWH not detected
input: PC Speaker as /class/input/input4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 17 (level, low) -> IRQ 20
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 21
skge 1.11 addr 0xfeafc000 irq 21 chip Yukon-Lite rev 7
skge eth0: addr 00:0e:a6:96:a6:a3
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.44.3 [Dec 19 2007] on minor 0
ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50101 usecs
intel8x0: clocking to 48000
audit(1200926241.272:4): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:5): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:6): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:7): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:8): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:9): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:10): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:11): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
audit(1200926241.273:12): avc:  denied  { sys_admin } for  pid=1177 comm="loadkeys" capability=21 scontext=system_u:system_r:loadkeys_t:s0 tcontext=system_u:system_r:loadkeys_t:s0 tclass=capability
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
SELinux: initialized (dev sda3, type reiserfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 979956k swap on /dev/sda2.  Priority:-1 extents:1 across:979956k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

bioinfornatics · 21 janv. 2008

quand tu quitte vi tu dois appuyer sur [q]echap[/q] puis [q]:[/q]et tu met [q]wq[/q] pour enregistré et quitter

cat /var/log/Xorg.0.log | grep EE

cat /var/log/Xorg.0.log | grep WW

WW) No monitor specified for screen "Screen0"

Ton xorg est mal fait pose le

Chacual · 21 janv. 2008

Pourrais-tu poster le contenu de xorg.conf (dans /etc/X11 bien sûr...) ?

Edes · 21 janv. 2008

Même cause, même problème que julientavu.
J'ai également une ATI X1650 Pro (RV530 LE), et lorsque j'ai essayé les pilotes proprios, le boot se déroulait nickel, puis écran noir, et les les touches Ctrl+Alt+Fn ne donnaient rien non plus.
J'ai dû rebooté et relancé sous une version antérieur de kernel, afin de désinstaller les pilotes ATI, car j'avais beau modifié le Xorg.conf, il retrouvait toujours les valeurs initiales (soit en fgrlx).
Bref, ça tournne à peu près bien sous RadeonHD (pas de 3D), et j'attendais l'arrivée dans les dépôts livna de la nouvelle mouture des pilotes proprios comme l'indiquait récemment VINDICATORs ici
Mais si quelqu'un a une meilleure solution, je suis preneur.

PS : je ne suis pas sur la bonne machine, mais je regarde de plus près plus tard mon Xorg.log

bioinfornatics · 21 janv. 2008

enregistré votre nouveaux xorg.conf et supprimer xorg.conf~

VINDICATORs · 21 janv. 2008

Pour la nouvelle version il faut attendre un peut, car il y a eu des problèmes avec les scripts de compilation!

Jjulientavu · 21 janv. 2008

merci bioinfornatics, mais j'enregistre bien mon fichier à chaque fois dans vi ...
par contre pour le xorg.conf , c'est soit celui d'origine , soit celui modifié automatiquement après l'install des driver.
J'ai pas le temps de le poster.

bioinfornatics · 21 janv. 2008

met ta clef usb
cp /etc/xorg.conf /media/nom_de_maclef/xorg.txt

VINDICATORs · 21 janv. 2008

Au passage je veut pas être méchant, mais mettre des cartes graphique aussi puissante sur de l'AGP c'est quand même un peut trop! surtout que le cpu, enfin je pense que ce ne doit pas être un très récent, doit fortement limiter la puissance de la cg!

nouvo09 · 21 janv. 2008

Bah j'ai bien une X1600 Pro 512 Mo en AGP!

Bon ok j'ai jamais réussi à la faire fonctionner sous Fedora avec le driver proprio, sans avoir jamais su pourquoi. En même temps elle fonctionne si bien avec le driver Vesa qu'on regretterait de s'en priver.

Edes · 21 janv. 2008

Non, non tu n'es pas méchant, tu as raison.
Mais, dans mon cas, lorsque ma 9800 Pro a rendu l'âme, je n'avais pas spécialement envie de changer tout mon matériel.
Même si le cpu est à ses limites, j'avoue que cette carte a bien boosté ma config.

VINDICATORs · 21 janv. 2008

nouvo09 ta testé avec le radeonHD??? (J'en ai encore eu deux en mains sur des Pentium 4 et elles fonctionnes impec!)

Je m'en doute Edes!

Autre point à noté! Vous avez quoi comme puissance d'alimentation?