Salut, voila je n'arrive pas à me connecter sur un serveur web via une adresse dyndns.
En effectutant un ping de l'adresse, il me renvoie la bonne adresse ip, dans mon routeur le port 80 est bien rediriger sur mon adresse
étant encore qu'un débutant je vous montre mon fichier ddclient et dites moi si vous trouvez des erreurs.
Merci A+
######################################################################
##
## $Id: sample-etc_ddclient.conf 2 2006-05-22 19:37:19Z wimpunk $
##
## Define default global variables with lines like:
## var=value [, var=value]*
## These values will be used for each following host unless overridden
## with a local variable definition.
##
## Define local variables for one or more hosts with:
## var=value [, var=value]* host.and.domain[,host2.and.domain...]
##
## Lines can be continued on the following line by ending the line
## with a \
##
##
## Warning: not all supported routers or dynamic DNS services
## are mentioned here.
##
######################################################################
daemon=300 # check every 300 seconds
syslog=yes # log update msgs to syslog
mail=root # mail all msgs to root
mail-failure=root # mail failed update msgs to root
pid=/var/run/ddclient/ddclient.pid # record PID in file.
ssl=yes # use ssl-support. Works with
# ssl-library
#
#use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW
#use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW
#use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW
#use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW
#use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW
#use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW
#use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro
#use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router
#use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL Router
#use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com OfficeConnect Remote 812
#use=e-tech, fw=192.168.1.1:80 # via E-tech Router
#use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H DSL Router
#
#fw-login=admin, fw-password=XXXXXX # FW login and password
#
## To obtain an IP address from FW status page (using fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
#
## To obtain an IP address from Web status page (using the proxy if defined)
use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
#
#use=ip, ip=127.0.0.1 # via static IP's
#use=if, if=eth0 # via interfaces
#use=web # via web
#
protocol=dyndns2 # default protocol
#proxy=fasthttp.sympatico.ca:80 # default proxy
server=members.dyndns.org # default server
server=members.dyndns.org:8245 # default server (bypassing proxies)
login=xxxxx # default login
password=xxxxxx # default password
#mx=mx.for.your.host # default MX
#backupmx=yes|no # host is primary MX?
#wildcard=yes|no # add wildcard CNAME?
##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
server=members.dyndns.org, \
protocol=dyndns2 \
srvfed.dyndns.org
##
## dyndns.org static addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# static=yes, \
# server=members.dyndns.org, \
protocol=dyndns2 \
xxxxxx.dyndns.org
##
##
## dyndns.org custom addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# custom=yes, \
# server=members.dyndns.org, \
# protocol=dyndns2 \
# your-domain.top-level,your-other-domain.top-level
