Bonjour,

Comment faire pour que fedora reconaisse mon htc touch quand je le connecte dans l'usb? (ça tourne sous windows mobile 6)?


Merci
Normalement il devrait le reconnaitre sans problème. Après l'avoir branché sur usb que renvoi lsusb -v ?
Je fais le test ce soir quand je rentre!

En fait ce qui me fais dire qu'il ne le reconnais pas:
J'ai XP en virtuel avec virtualbox, dans lequel j'ai installé le programme fournis avec le touch. Donc dans virtual box, j'ai activé l'usb pour xp, et j'ai mis un filtre. Pour le filtre, je pouvais bien sélectionné htc etc etc... Mais il reste en grisé et pas moyen de l'avoir dans xp.

j'ai le meme problème avec mon appareil photo. Dans les logiciels photos de fedora, il trouve bien le nom de l'appareil, mais pas moyen de vraiment se connecter pour importer les photos.

Mais si il faut que je vous donne des infos supplémentaires je ne sais faire ça que ce soir.

(on se sent bete quand on découvre linux lol)

Merci
Refuznik wrote:Normalement il devrait le reconnaitre sans problème. Après l'avoir branché sur usb que renvoi lsusb -v ?
ca me met "command not found"
Alors la je viens de constater un phénomène d'une extrême étrangeté: dès que je branche l'appareil, le wifi se coupe!!!! J'ai essayé plusieurs fois pour être sur.:idea:
Avant de lancer la commande fait un su - et ton mot de passe.
[c][Nico@localhost ~]$ /sbin/lsusb
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0bb4:0b0c High Tech Computer Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000 [/c]


J'ai remarqué qu'après la déconnexion du wifi, il essaye de se reconnecter à quelque chose. Il essayerait quand meme pas de prendre le téléphone pour un périf réseau??

Sinon en gros ce que je veux c'est accéder aux fichiers pour les mp3 etc, la syncro a la limite je m'en fous.

merci


EDIT j'ai oublié le " -v", je recommence mais ca va prendre un peu de temps car je vais reperdre mon wifi en faisant le test
[c]Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.23.1-49.fc8 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x60
PortPwrCtrlMask 0x17 0x15
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power

Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.23.1-49.fc8 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x60
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.23.1-49.fc8 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x60
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power

Bus 003 Device 002: ID 0bb4:0b0c High Tech Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 1 ?
bDeviceProtocol 1 Microsoft ActiveSync
bMaxPacketSize0 64
idVendor 0x0bb4 High Tech Computer Corp.
idProduct 0x0b0c
bcdDevice 0.00
iManufacturer 1 HTC
iProduct 2 Generic RNDIS
iSerial 3 3fbf5000-7351-0801-0d13-89cd945c030f
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 62
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 239 Miscellaneous Device
bInterfaceSubClass 1 ?
bInterfaceProtocol 1 Microsoft ActiveSync
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.23.1-49.fc8 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x60
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0103 power enable connect

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.23.1-49.fc8 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x60
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power[/c]
Si il interrompt ta connection je crois que ça vient de Generic RNDIS. En fait c'est une feature pour te permettre de surfer avec ton HTCI.

Essaie de voir en installant usb-rndis-lite et SynCE.
J'ai installé synce et usb-rndis-lite.

Pour rndis truc, je l'ai pas trouvé dans yum mais j'ai trouvé une archive. Je l'ai installé suivant les indications d'un site web, mais ca c'est peut etre mal passé, parce que ca ne fonctionne toujours pas! Pour etre sur de l'install, voici le code:

[c][root@localhost synce-usb-rndis-lite-0.10.0]# make
make -C /lib/modules/2.6.23.1-49.fc8/build SUBDIRS=/home/Nico/synce-usb-rndis-lite-0.10.0 modules
make[1]: entrant dans le répertoire « /usr/src/kernels/2.6.23.1-49.fc8-x86_64 »
CC [M] /home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.o
/home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.c: In function 'usbnet_probe':
/home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.c:1162: attention : assignment from incompatible pointer type
CC [M] /home/Nico/synce-usb-rndis-lite-0.10.0/cdc_ether.o
CC [M] /home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.o
/home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.c: In function 'rndis_tx_fixup':
/home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.c:658: attention : assignment makes integer from pointer without a cast
Building modules, stage 2.
MODPOST 3 modules
CC /home/Nico/synce-usb-rndis-lite-0.10.0/cdc_ether.mod.o
LD [M] /home/Nico/synce-usb-rndis-lite-0.10.0/cdc_ether.ko
CC /home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.mod.o
LD [M] /home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.ko
CC /home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.mod.o
LD [M] /home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.ko
make[1]: quittant le répertoire « /usr/src/kernels/2.6.23.1-49.fc8-x86_64 »
[root@localhost synce-usb-rndis-lite-0.10.0]# make install
make -C /lib/modules/2.6.23.1-49.fc8/build SUBDIRS=/home/Nico/synce-usb-rndis-lite-0.10.0 modules_install
make[1]: entrant dans le répertoire « /usr/src/kernels/2.6.23.1-49.fc8-x86_64 »
INSTALL /home/Nico/synce-usb-rndis-lite-0.10.0/cdc_ether.ko
INSTALL /home/Nico/synce-usb-rndis-lite-0.10.0/rndis_host.ko
INSTALL /home/Nico/synce-usb-rndis-lite-0.10.0/usbnet.ko
DEPMOD 2.6.23.1-49.fc8
make[1]: quittant le répertoire « /usr/src/kernels/2.6.23.1-49.fc8-x86_64 »
depmod -ae
make: depmod : commande introuvable
make: *** [install] Erreur 127
[root@localhost synce-usb-rndis-lite-0.10.0]# yum install synce
Setting up Install Process
Parsing package install arguments
Requested dep: synce is provided by installed package
Nothing to do[/c]
make: depmod : commande introuvable
il te manque la commande depmod : yum install module-init-tools
proxy wrote:
make: depmod : commande introuvable
il te manque la commande depmod : yum install module-init-tools
Ca me mets pourtant que c'est deja installé:
[c][root@localhost Nico]# yum install module-init-tools
Setting up Install Process
Parsing package install arguments
Package module-init-tools - 3.4-2.fc8.x86_64 is already installed.
Nothing to do
[root@localhost Nico]#[/c]
Laiss tomber usb-rndis (tu as un x86_64) et fait la synchro avec synce alors.
Si tu ne sais pas utiliser synce, regarde une doc ou prends un gui comme Gnome-Sync, je crois en plus que tu as un aplet gnome dans ta barre (clique droit ajouter au tableau de bord).
Ok je vais me renseigner sur synce alors.

Merci beaucoup pour l'aide.

Pour le truc que j'ai essayé d'installer je peux laisser ca comme ca ou je dois faire quelque chose pour l'enlever?
Quant tu as installé le module tu as fait un su ou un su - avant ?
Refuznik wrote:Laiss tomber usb-rndis (tu as un x86_64) et fait la synchro avec synce alors.
Si tu ne sais pas utiliser synce, regarde une doc ou prends un gui comme Gnome-Sync, je crois en plus que tu as un aplet gnome dans ta barre (clique droit ajouter au tableau de bord).
Encore une pitite question :-P. Ce que tu disais là, ca sous entend qu' en i386 ça serait plus simple?
i686 s'il te plait 😉

Non il faut seulement penser à modifier ton makefile pour mettre /sbin/depmod -ae à la place de simplement depmod -ae. N epa soublier de redemarrer pour lui faire prendre le module par le noyau.

Sinon tu t'en sors ?
Non :-? J'ai trouvé plusieurs howto mais à chaque fois à un moment donné ça foire. Je crois que je vais laisser tomber çà pour le moment et réessayer quand je serai un peu plus à l'aise dans linux, parce que la j'ai plus l'impression de mettre le bronx dans tout un tas de fichier que de faire de bonnes choses!