Bonjour,

Je possède un un HP DV6120 EA possédant les caractéristiques suivantes:
http://realweb.fr/dotclear/index.php?post/2007/03/27/Bete-n1%3A-HP-Pavillon-dv-6000
Jamais installation de Fedora ne m'aura posé autant de problèmes malheureusement.


Problème#1: Les pilotes graphiques NVIDIA

Voulant profiter de l'accélération 3D et des bureaux 3D sur la dernière mouture de Fedora, j'ai donc voulu installer les pilotes nvidia comme l'ayant fait avec la F7. J'ai donc fait un:
yum install kmod-nvidia

Je possède une NVIDIA Geforce Go 7200 et je me suis heurté au message suivant: 
(II) Setting vga for screen 0.
(II) Enabling PCI device
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(EE) NVIDIA(0): The interrupt for NVIDIA graphics device PCI:5:0:0 appears to
(EE) NVIDIA(0):     be edge-triggered.  Please see Chapter 8: Common Problems
(EE) NVIDIA(0):     in the README for additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found
J'ai tenté la configuration automatique pour revenir finalement au driver générique. Pour info j'ai également tenté le pilote kmod-nvidia-96xx. J'ai aussi désactivé SELinux mais rien n'y fait.


-----
Probleme #2: le wifi
Ni la méthode bc43-fwcutter, ni la méthode nsdiswrapper ne semble aboutir et ce, depuis la Fedora7.

Détail de la carte: 
03:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)
        Subsystem: Hewlett-Packard Company Unknown device 1364
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 0
        Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-
        Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
                Address: 00000000  Data: 0000
        Capabilities: [d0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <4us, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
                Link: Latency L0s <4us, L1 <64us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
Pour info, j'ai utilisé les pilotes présents sur la partition Windows que j'ai conservé puis ceux mis à jour sur le site officiels de HP...
->Méthode b43 
# lsmod |grep 43
arc4                   10433  2 
b43                   147057  0 
ssb                    38341  1 b43
rfkill                 14801  1 b43
mac80211              127949  1 b43
input_polldev          12113  1 b43
crc_itu_t              10433  1 firewire_core

# iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.

wmaster0  no wireless extensions.

wlan0     IEEE 802.11g  ESSID:""  
          Mode:Managed  Channel:0  Access Point: Not-Associated   
          Tx-Power=0 dBm   
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B   
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
Cependant j'ai ceci dans mon /var/log/message: 
Nov 15 20:52:50 localhost kernel: PCI: No IRQ known for interrupt pin A of device 0000:03:00.0. Probably buggy MP table.
Nov 15 20:52:50 localhost kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
Nov 15 20:52:51 localhost kernel: b43-phy0: Broadcom 4311 WLAN found
Nov 15 20:52:51 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:52:51 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:52:53 localhost kernel: input: Unspecified device as /class/input/input4
Nov 15 20:52:53 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:52:53 localhost kernel: current handler: timer
Nov 15 20:52:53 localhost kernel: 
Nov 15 20:52:53 localhost kernel: Call Trace:
Nov 15 20:52:53 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:52:53 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:52:53 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:52:53 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:52:53 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:52:53 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:52:53 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:52:53 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:52:53 localhost kernel:  [<ffffffff81235345>] devinet_ioctl+0x235/0x597
Nov 15 20:52:53 localhost kernel:  [<ffffffff811e4bcb>] sock_ioctl+0x1c8/0x1e5
Nov 15 20:52:53 localhost kernel:  [<ffffffff810a7365>] do_ioctl+0x21/0x6b
Nov 15 20:52:53 localhost kernel:  [<ffffffff810a75f2>] vfs_ioctl+0x243/0x25c
Nov 15 20:52:53 localhost kernel:  [<ffffffff810a7664>] sys_ioctl+0x59/0x79
Nov 15 20:52:53 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:52:53 localhost kernel: 
Nov 15 20:52:53 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:52:53 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:52:53 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:52:55 localhost kernel: input: Unspecified device as /class/input/input5
Nov 15 20:52:55 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:52:55 localhost kernel: current handler: timer
Nov 15 20:52:55 localhost kernel: 
Nov 15 20:52:55 localhost kernel: Call Trace:
Nov 15 20:52:55 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:52:55 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:52:55 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:52:55 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:52:55 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:52:55 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:52:55 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:52:55 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:52:55 localhost kernel:  [<ffffffff81235345>] devinet_ioctl+0x235/0x597
Nov 15 20:52:55 localhost kernel:  [<ffffffff811e4bcb>] sock_ioctl+0x1c8/0x1e5
Nov 15 20:52:55 localhost kernel:  [<ffffffff810a7365>] do_ioctl+0x21/0x6b
Nov 15 20:52:55 localhost kernel:  [<ffffffff810a75f2>] vfs_ioctl+0x243/0x25c
Nov 15 20:52:55 localhost kernel:  [<ffffffff810a7664>] sys_ioctl+0x59/0x79
Nov 15 20:52:55 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:52:55 localhost kernel: 
Nov 15 20:52:55 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:52:55 localhost dhclient: wmaster0: unknown hardware address type 801
Nov 15 20:52:56 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:52:56 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:52:57 localhost kernel: input: Unspecified device as /class/input/input6
Nov 15 20:52:57 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:52:57 localhost kernel: current handler: timer
Nov 15 20:52:57 localhost kernel: 
Nov 15 20:52:57 localhost kernel: Call Trace:
Nov 15 20:52:57 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:52:57 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:52:57 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:52:57 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:52:57 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:52:57 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:52:57 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:52:57 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:52:57 localhost kernel:  [<ffffffff81235345>] devinet_ioctl+0x235/0x597
Nov 15 20:52:57 localhost kernel:  [<ffffffff81086491>] mprotect_fixup+0x46d/0x529
Nov 15 20:52:57 localhost kernel:  [<ffffffff811e4bcb>] sock_ioctl+0x1c8/0x1e5
Nov 15 20:52:57 localhost kernel:  [<ffffffff810a7365>] do_ioctl+0x21/0x6b
Nov 15 20:52:57 localhost kernel:  [<ffffffff810a75f2>] vfs_ioctl+0x243/0x25c
Nov 15 20:52:57 localhost kernel:  [<ffffffff810a7664>] sys_ioctl+0x59/0x79
Nov 15 20:52:57 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:52:57 localhost kernel: 
Nov 15 20:52:57 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:52:57 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:52:57 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:52:58 localhost kernel: input: Unspecified device as /class/input/input7
Nov 15 20:52:58 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:52:58 localhost kernel: current handler: timer
Nov 15 20:52:58 localhost kernel: 
Nov 15 20:52:58 localhost kernel: Call Trace:
Nov 15 20:52:58 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:52:58 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:52:58 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:52:58 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:52:58 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:52:58 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:52:58 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:52:58 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:52:58 localhost kernel:  [<ffffffff81235345>] devinet_ioctl+0x235/0x597
Nov 15 20:52:58 localhost kernel:  [<ffffffff81082777>] free_pgtables+0xae/0xc3
Nov 15 20:52:58 localhost kernel:  [<ffffffff811e4bcb>] sock_ioctl+0x1c8/0x1e5
Nov 15 20:52:58 localhost kernel:  [<ffffffff810a7365>] do_ioctl+0x21/0x6b
Nov 15 20:52:58 localhost kernel:  [<ffffffff810a75f2>] vfs_ioctl+0x243/0x25c
Nov 15 20:52:58 localhost kernel:  [<ffffffff810a7664>] sys_ioctl+0x59/0x79
Nov 15 20:52:58 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:52:58 localhost kernel: 
Nov 15 20:52:58 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:52:58 localhost dhclient: wmaster0: unknown hardware address type 801
Nov 15 20:52:58 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
Nov 15 20:52:58 localhost dhclient: send_packet: Network is down
Nov 15 20:52:58 localhost dhclient: receive_packet failed on wlan0: Network is down
Nov 15 20:53:02 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Nov 15 20:53:02 localhost dhclient: send_packet: Network is down
Nov 15 20:53:09 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Nov 15 20:53:09 localhost dhclient: send_packet: Network is down
Nov 15 20:53:16 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
Nov 15 20:53:16 localhost dhclient: send_packet: Network is down
Nov 15 20:53:23 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
Nov 15 20:53:23 localhost dhclient: send_packet: Network is down
Nov 15 20:53:33 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
Nov 15 20:53:33 localhost dhclient: send_packet: Network is down
Nov 15 20:53:46 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10
Nov 15 20:53:46 localhost dhclient: send_packet: Network is down
Nov 15 20:53:56 localhost dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3
Nov 15 20:53:56 localhost dhclient: send_packet: Network is down
Nov 15 20:53:59 localhost dhclient: No DHCPOFFERS received.
Nov 15 20:53:59 localhost NetworkManager: <info>  wlan0: Device is fully-supported using driver 'b43-pci-bridge'.
Nov 15 20:53:59 localhost NetworkManager: <info>  (wlan0): exporting device as /org/freedesktop/NetworkManager/Device/4
Nov 15 20:53:59 localhost NetworkManager: <info>  Now managing wireless (802.11) device 'wlan0'.
Nov 15 20:53:59 localhost NetworkManager: <info>  Bringing up device wlan0
Nov 15 20:53:59 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:53:59 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:54:00 localhost kernel: input: Unspecified device as /class/input/input8
Nov 15 20:54:00 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:54:00 localhost kernel: current handler: timer
Nov 15 20:54:00 localhost kernel: 
Nov 15 20:54:00 localhost kernel: Call Trace:
Nov 15 20:54:00 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:54:00 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:54:00 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:54:00 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:54:00 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:54:00 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:54:00 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f7a1b>] do_setlink+0x1dd/0x2cc
Nov 15 20:54:00 localhost kernel:  [<ffffffff810f4886>] avc_has_perm+0x49/0x5b
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f84c3>] rtnetlink_rcv_msg+0x0/0x1e5
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f8c0b>] rtnl_setlink+0xe3/0x102
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f8521>] rtnetlink_rcv_msg+0x5e/0x1e5
Nov 15 20:54:00 localhost kernel:  [<ffffffff81207244>] netlink_run_queue+0x75/0x104
Nov 15 20:54:00 localhost kernel:  [<ffffffff811f8471>] rtnetlink_rcv+0x30/0x4c
Nov 15 20:54:00 localhost kernel:  [<ffffffff81207721>] netlink_data_ready+0x12/0x50
Nov 15 20:54:00 localhost kernel:  [<ffffffff81206516>] netlink_sendskb+0x23/0x3d
Nov 15 20:54:00 localhost kernel:  [<ffffffff812076fc>] netlink_sendmsg+0x2b7/0x2ca
Nov 15 20:54:00 localhost kernel:  [<ffffffff811e5329>] sock_sendmsg+0xea/0x107
Nov 15 20:54:00 localhost kernel:  [<ffffffff810493dd>] autoremove_wake_function+0x0/0x2e
Nov 15 20:54:00 localhost kernel:last message repeated 2 times
Nov 15 20:54:00 localhost kernel:  [<ffffffff811e555d>] sys_sendmsg+0x217/0x28a
Nov 15 20:54:00 localhost kernel:  [<ffffffff810aff17>] mntput_no_expire+0x1c/0x92
Nov 15 20:54:00 localhost kernel:  [<ffffffff811e5dbb>] sys_sendto+0x13c/0x151
Nov 15 20:54:00 localhost kernel:  [<ffffffff8102e01a>] update_curr+0xf8/0x11a
Nov 15 20:54:00 localhost kernel:  [<ffffffff8125b3bb>] thread_return+0x0/0xd8
Nov 15 20:54:00 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:54:00 localhost kernel: 
Nov 15 20:54:00 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:54:00 localhost NetworkManager: <info>  Deactivating device wlan0.
Nov 15 20:54:00 localhost kernel: Registered led device: b43-phy0:tx
Nov 15 20:54:00 localhost kernel: Registered led device: b43-phy0:rx
Nov 15 20:54:02 localhost kernel: input: Unspecified device as /class/input/input9
Nov 15 20:54:02 localhost kernel: IRQ handler type mismatch for IRQ 0
Nov 15 20:54:02 localhost kernel: current handler: timer
Nov 15 20:54:02 localhost kernel: 
Nov 15 20:54:02 localhost kernel: Call Trace:
Nov 15 20:54:02 localhost kernel:  [<ffffffff8106a7c8>] setup_irq+0x1ba/0x1d5
Nov 15 20:54:02 localhost kernel:  [<ffffffff883ba343>] :b43:b43_interrupt_handler+0x0/0x24f
Nov 15 20:54:02 localhost kernel:  [<ffffffff8106a98c>] request_irq+0xbe/0xe6
Nov 15 20:54:02 localhost kernel:  [<ffffffff883b69bb>] :b43:b43_wireless_core_start+0x8f/0x176
Nov 15 20:54:02 localhost kernel:  [<ffffffff883b97f2>] :b43:b43_op_start+0x47/0x6d
Nov 15 20:54:02 localhost kernel:  [<ffffffff8838590c>] :mac80211:ieee80211_open+0x1c2/0x3a2
Nov 15 20:54:02 localhost kernel:  [<ffffffff811f1611>] dev_open+0x2f/0x6e
Nov 15 20:54:02 localhost kernel:  [<ffffffff811ef721>] dev_change_flags+0xaa/0x168
Nov 15 20:54:02 localhost kernel:  [<ffffffff81235345>] devinet_ioctl+0x235/0x597
Nov 15 20:54:02 localhost kernel:  [<ffffffff811e4bcb>] sock_ioctl+0x1c8/0x1e5
Nov 15 20:54:02 localhost kernel:  [<ffffffff810a7365>] do_ioctl+0x21/0x6b
Nov 15 20:54:02 localhost kernel:  [<ffffffff810a75f2>] vfs_ioctl+0x243/0x25c
Nov 15 20:54:02 localhost kernel:  [<ffffffff810a7664>] sys_ioctl+0x59/0x79
Nov 15 20:54:02 localhost kernel:  [<ffffffff8100bd45>] tracesys+0xd5/0xda
Nov 15 20:54:02 localhost kernel: 
Nov 15 20:54:02 localhost kernel: b43-phy0 ERROR: Cannot request IRQ-0
Nov 15 20:54:02 localhost NetworkManager: <info>  (wlan0) supplicant interface is now in state 2 (from 1).
il est à noter que ce message apparait au démarrage, donc au chargement des modules.
De plus: 
# iwlist wlan0 scan
wlan0     Interface doesn't support scanning : Network is down
# ifconfig wlan0 up
SIOCSIFFLAGS: Périphérique ou ressource occupé

->Méthode ndiswrapper
Si mes souvenirs sont bons, cette méthode a déjà marché sur une autre distribution il y a de cela un an.

Je me suis assuré qu'aucun module b43 ne soit chargé avec : 
# lsmod |grep b43

# ndiswrapper -l
bcmwl5 : driver installed
        device (14E4:4311) present (alternate driver: ssb)
Comme je l'ai dit précédemment, j'ai utilisé les drivers présents sur ma partitions windows et du site HP également pour réaliser mes tests.
# lsmod| grep ndiswrapper
ndiswrapper           219136  0
Et là... c'est le drame 🙁 : 
# iwconfig 
lo        no wireless extensions.

eth0      no wireless extensions.

# ifconfig wlan0 up
wlan0: interface inconnue: Aucun périphérique de ce type
Voilà je suis bloqué à ces 2 niveaux.
-----
Problème #3: le son
J'ai un écho rendant impossible la lecture du son. Pensant que c'était un problème de micro, j'ai donc désactivé le micro dans PulseAudio mais le fait que la lecture de vidéo flash sur youtube est également ralentie me laisse à penser qu'il s'agit d'un problème de pilotes. Mais une vidéo lue sur vlc donne juste un problème de son sans ralentissement. Peut-être donc que l'installation aussi du flash n'a pas été réalisée correctement... I do not know !
Mais j'avoue ne pas avoir fait trop de recherches pour ce problème au moment où je demande votre aide.
-----
Problème #4: les ptites bidouilles
*Comment enlever le bip système quand on tente de revenir à la page précédente dans le Navigateur de Fichier avec la touche backspace ?


Voili voilou..
Merci à ceux qui m'aideront à résoudre ces problèmes. 🙂
Bonjour,

Pour moi, F8 a apporter son lot de problème mais j'ai réussi à presque tout les résorber. Pour le problème #1, à part lire le Readme, je n'ai pas du tout d'idée. Pour le wifi, j'ai plus ou moins (enfin, moins que plus) le même problème avec un 4306, et donc je cherches aussi une solution. Pour le solution pour #3, c'est assez simple, il suffit d'installer d'installer libflashsupport, qui permet d'apporter le support de pulse audio à flash. Pour les bip du #4, tu lances gnome-sound-properties et tu décoches Activer les bips système dans l'onglet "éponyme".

En espérant que ça t'avance
Merci Bouska pour ta réponse;)
Malheureusement il n'y a que le #4 qui soit réglé maintenant grâce à ta méthode. Pour le #3 et le son, j'ai encore des choses inaudibles mais ce n'est pas qquechose de prore à flash mais à toute appli qui tente d'émettre un son !
De plus la libflashsupport est déjà installée.