Bonjour,
Je n'ai toujours pas résolu mon problème... Voici les fichiers /var/log/messages (depuis le boot) et /etc/hosts.
Merci de votre aide,
--******************/var/log/messages:**********************
Nov 5 08:35:46 localhost syslogd 1.4.1: restart.
Nov 5 08:35:47 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 5 08:35:47 localhost kernel: Bootdata ok (command line is ro root=LABEL=/1 rhgb quiet)
Nov 5 08:35:47 localhost kernel: Linux version 2.6.18-1.2798.fc6xen (
brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:59:01 EDT 2006
Nov 5 08:35:47 localhost kernel: BIOS-provided physical RAM map:
Nov 5 08:35:47 localhost kernel: Xen: 0000000000000000 - 000000007611a000 (usable)
Nov 5 08:35:47 localhost kernel: No mptable found.
Nov 5 08:35:47 localhost kernel: DMI 2.4 present.
Nov 5 08:35:47 localhost kernel: >>> ERROR: Invalid checksum
Nov 5 08:35:48 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 5 08:35:48 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 5 08:35:48 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Nov 5 08:35:48 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Nov 5 08:35:48 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 5 08:35:48 localhost kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 5 08:35:48 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 5 08:35:48 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 5 08:35:48 localhost kernel: Setting APIC routing to xen
Nov 5 08:35:48 localhost kernel: Using ACPI (MADT) for SMP configuration information
Nov 5 08:35:48 localhost kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
Nov 5 08:35:48 localhost kernel: Built 1 zonelists. Total pages: 483610
Nov 5 08:35:48 localhost kernel: Kernel command line: ro root=LABEL=/1 rhgb quiet
Nov 5 08:35:48 localhost kernel: Initializing CPU#0
Nov 5 08:35:49 localhost kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
Nov 5 08:35:49 localhost kernel: Xen reported: 1997.358 MHz processor.
Nov 5 08:35:49 localhost kernel: Console: colour VGA+ 80x25
Nov 5 08:35:49 localhost kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 5 08:35:49 localhost kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 5 08:35:49 localhost kernel: Software IO TLB enabled:
Nov 5 08:35:49 localhost kernel: Aperture: 2 megabytes
Nov 5 08:35:49 localhost automount[2036]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
Nov 5 08:35:49 localhost kernel: Kernel range: 0xffff880000a78000 - 0xffff880000c78000
Nov 5 08:35:49 localhost kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Nov 5 08:35:49 localhost kernel: Memory: 1877248k/1934440k available (2323k kernel code, 48304k reserved, 1328k data, 172k init)
Nov 5 08:35:50 localhost kernel: Calibrating delay using timer specific routine.. 4994.70 BogoMIPS (lpj=9989407)
Nov 5 08:35:50 localhost kernel: Security Framework v1.0.0 initialized
Nov 5 08:35:50 localhost kernel: SELinux: Initializing.
Nov 5 08:35:50 localhost kernel: SELinux: Starting in permissive mode
Nov 5 08:35:51 localhost kernel: selinux_register_security: Registering secondary module capability
Nov 5 08:35:51 localhost gpm[2083]: *** info [startup.c(95)]:
Nov 5 08:35:51 localhost kernel: Capability LSM initialized as secondary
Nov 5 08:35:51 localhost gpm[2083]: Started gpm successfully. Entered daemon mode.
Nov 5 08:35:51 localhost kernel: Mount-cache hash table entries: 256
Nov 5 08:35:51 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 5 08:35:51 localhost kernel: CPU: L2 cache: 4096K
Nov 5 08:35:51 localhost kernel: CPU: Physical Processor ID: 0
Nov 5 08:35:51 localhost kernel: CPU: Processor Core ID: 0
Nov 5 08:35:51 localhost kernel: (SMP-)alternatives turned off
Nov 5 08:35:52 localhost kernel: ACPI: Core revision 20060707
Nov 5 08:35:52 localhost kernel: Brought up 2 CPUs
Nov 5 08:35:53 localhost kernel: Initializing CPU#1
Nov 5 08:35:53 localhost kernel: migration_cost=26
Nov 5 08:35:53 localhost kernel: checking if image is initramfs... it is
Nov 5 08:35:53 localhost kernel: Grant table initialized
Nov 5 08:35:53 localhost kernel: NET: Registered protocol family 16
Nov 5 08:35:53 localhost kernel: ACPI: bus type pci registered
Nov 5 08:35:53 localhost kernel: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
Nov 5 08:35:53 localhost kernel: PCI: Not using MMCONFIG.
Nov 5 08:35:53 localhost kernel: PCI: Using configuration type 1
Nov 5 08:35:54 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ LMPWR] OemTableId [ DELLLOM] [20060707]
Nov 5 08:35:54 localhost kernel: ACPI: Interpreter enabled
Nov 5 08:35:54 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Nov 5 08:35:54 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 5 08:35:54 localhost kernel: ACPI: Assume root bridge [_SB_.PCI0] bus is 0
Nov 5 08:35:54 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Nov 5 08:35:54 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 5 08:35:54 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11)
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Nov 5 08:35:55 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Nov 5 08:35:55 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Nov 5 08:35:55 localhost kernel: pnp: PnP ACPI init
Nov 5 08:35:55 localhost kernel: pnp: PnP ACPI: found 15 devices
Nov 5 08:35:55 localhost kernel: xen_mem: Initialising balloon driver.
Nov 5 08:35:55 localhost kernel: usbcore: registered new driver usbfs
Nov 5 08:35:55 localhost kernel: usbcore: registered new driver hub
Nov 5 08:35:55 localhost kernel: PCI: Using ACPI for IRQ routing
Nov 5 08:35:55 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Nov 5 08:35:56 localhost kernel: NetLabel: Initializing
Nov 5 08:35:56 localhost kernel: NetLabel: domain hash size = 128
Nov 5 08:35:56 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 5 08:35:56 localhost kernel: NetLabel: unlabeled traffic allowed by default
Nov 5 08:35:56 localhost xinetd[2063]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
Nov 5 08:35:56 localhost kernel: pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
Nov 5 08:35:56 localhost xinetd[2063]: Started working: 1 available service
Nov 5 08:35:56 localhost kernel: pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:03: ioport range 0x1060-0x107f has been reserved
Nov 5 08:35:56 localhost kernel: pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0x910-0x91f has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0x920-0x92f has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:08: ioport range 0x930-0x97f has been reserved
Nov 5 08:35:57 localhost kernel: pnp: 00:0e: ioport range 0xcb0-0xcbb has been reserved
Nov 5 08:35:57 localhost kernel: PCI: Bridge: 0000:00:01.0
Nov 5 08:35:58 localhost kernel: IO window: e000-efff
Nov 5 08:35:58 localhost kernel: MEM window: ed000000-efefffff
Nov 5 08:35:58 localhost kernel: PREFETCH window: d0000000-dfffffff
Nov 5 08:35:58 localhost kernel: PCI: Bridge: 0000:00:1c.0
Nov 5 08:35:58 localhost kernel: IO window: disabled.
Nov 5 08:35:58 localhost gdm[2214]: security token driver '/usr/lib64/pkcs11/libcoolkeypk11.so' could not be loaded
Nov 5 08:35:58 localhost kernel: MEM window: disabled.
Nov 5 08:35:58 localhost kernel: PREFETCH window: disabled.
Nov 5 08:35:58 localhost kernel: PCI: Bridge: 0000:00:1c.1
Nov 5 08:35:59 localhost kernel: IO window: disabled.
Nov 5 08:35:59 localhost kernel: MEM window: ecf00000-ecffffff
Nov 5 08:35:59 localhost kernel: PREFETCH window: disabled.
Nov 5 08:35:59 localhost kernel: PCI: Bridge: 0000:00:1c.2
Nov 5 08:35:59 localhost kernel: IO window: disabled.
Nov 5 08:35:59 localhost kernel: MEM window: ece00000-ecefffff
Nov 5 08:35:59 localhost kernel: PREFETCH window: disabled.
Nov 5 08:35:59 localhost kernel: PCI: Bridge: 0000:00:1c.3
Nov 5 08:35:59 localhost kernel: IO window: d000-dfff
Nov 5 08:36:00 localhost kernel: MEM window: ecc00000-ecdfffff
Nov 5 08:36:00 localhost kernel: PREFETCH window: e0000000-e01fffff
Nov 5 08:36:00 localhost kernel: PCI: Bridge: 0000:00:1e.0
Nov 5 08:36:00 localhost kernel: IO window: disabled.
Nov 5 08:36:00 localhost kernel: MEM window: ecb00000-ecbfffff
Nov 5 08:36:00 localhost kernel: PREFETCH window: disabled.
Nov 5 08:36:00 localhost kernel: GSI 16 sharing vector 0xA0 and IRQ 16
Nov 5 08:36:00 localhost kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 5 08:36:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 5 08:36:00 localhost kernel: GSI 17 sharing vector 0xA8 and IRQ 17
Nov 5 08:36:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.1
-> GSI 17 (level, low) -> IRQ 17
Nov 5 08:36:00 localhost kernel: GSI 18 sharing vector 0xB0 and IRQ 18
Nov 5 08:36:00 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Nov 5 08:36:00 localhost kernel: GSI 19 sharing vector 0xB8 and IRQ 19
Nov 5 08:36:01 localhost kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Nov 5 08:36:01 localhost kernel: NET: Registered protocol family 2
Nov 5 08:36:01 localhost kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 5 08:36:01 localhost kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
Nov 5 08:36:01 localhost kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
Nov 5 08:36:01 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 5 08:36:01 localhost kernel: TCP reno registered
Nov 5 08:36:01 localhost kernel: Simple Boot Flag at 0x79 set to 0x1
Nov 5 08:36:01 localhost kernel: IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
Nov 5 08:36:01 localhost kernel: audit: initializing netlink socket (disabled)
Nov 5 08:36:01 localhost kernel: audit(1194251723.088:1): initialized
Nov 5 08:36:01 localhost kernel: VFS: Disk quotas dquot_6.5.1
Nov 5 08:36:01 localhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 5 08:36:01 localhost kernel: SELinux: Registering netfilter hooks
Nov 5 08:36:01 localhost kernel: Initializing Cryptographic API
Nov 5 08:36:01 localhost kernel: ksign: Installing public key data
Nov 5 08:36:01 localhost kernel: Loading keyring
Nov 5 08:36:01 localhost kernel: - Added public key 4D36EEF71C3A3150
Nov 5 08:36:01 localhost kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
Nov 5 08:36:01 localhost kernel: io scheduler noop registered
Nov 5 08:36:01 localhost kernel: io scheduler anticipatory registered
Nov 5 08:36:02 localhost kernel: io scheduler deadline registered
Nov 5 08:36:02 localhost kernel: io scheduler cfq registered (default)
Nov 5 08:36:02 localhost kernel: assign_interrupt_mode Found MSI capability
Nov 5 08:36:03 localhost last message repeated 4 times
Nov 5 08:36:03 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 5 08:36:03 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
Nov 5 08:36:03 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
Nov 5 08:36:03 localhost kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Nov 5 08:36:03 localhost kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Nov 5 08:36:03 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
Nov 5 08:36:03 localhost kernel: ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
Nov 5 08:36:03 localhost kernel: ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Nov 5 08:36:03 localhost kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Nov 5 08:36:03 localhost kernel: ACPI: Thermal Zone [THM] (26 C)
Nov 5 08:36:03 localhost kernel: Real Time Clock Driver v1.12ac
Nov 5 08:36:03 localhost kernel: Non-volatile memory driver v1.2
Nov 5 08:36:03 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 5 08:36:04 localhost kernel: agpgart: Detected an Intel 945GM Chipset.
Nov 5 08:36:04 localhost kernel: agpgart: unable to get memory for graphics translation table.
Nov 5 08:36:04 localhost kernel: agpgart: agp_backend_initialize() failed.
Nov 5 08:36:04 localhost kernel: agpgart-intel: probe of 0000:00:00.0 failed with error -12
Nov 5 08:36:04 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Nov 5 08:36:04 localhost kernel: Xen virtual console successfully installed as ttyS0
Nov 5 08:36:04 localhost kernel: Event-channel device installed.
Nov 5 08:36:04 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 5 08:36:04 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 5 08:36:04 localhost kernel: ide0: I/O resource 0x1F0-0x1F7 not free.
Nov 5 08:36:04 localhost kernel: ide0: ports already in use, skipping probe
Nov 5 08:36:04 localhost kernel: hdc: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
Nov 5 08:36:04 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 5 08:36:04 localhost kernel: ide-floppy driver 0.99.newide
Nov 5 08:36:04 localhost kernel: usbcore: registered new driver libusual
Nov 5 08:36:04 localhost kernel: usbcore: registered new driver hiddev
Nov 5 08:36:05 localhost kernel: usbcore: registered new driver usbhid
Nov 5 08:36:05 localhost kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Nov 5 08:36:05 localhost kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 5 08:36:05 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 5 08:36:05 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 5 08:36:05 localhost kernel: mice: PS/2 mouse device common for all mice
Nov 5 08:36:05 localhost kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
Nov 5 08:36:05 localhost kernel: md: bitmap version 4.39
Nov 5 08:36:05 localhost kernel: TCP bic registered
Nov 5 08:36:05 localhost kernel: Initializing IPsec netlink socket
Nov 5 08:36:05 localhost kernel: NET: Registered protocol family 1
Nov 5 08:36:05 localhost kernel: NET: Registered protocol family 17
Nov 5 08:36:05 localhost kernel: Write protecting the kernel read-only data: 440k
Nov 5 08:36:05 localhost kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 5 08:36:05 localhost kernel: USB Universal Host Controller Interface driver v3.0
Nov 5 08:36:05 localhost kernel: GSI 20 sharing vector 0xC0 and IRQ 20
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
Nov 5 08:36:05 localhost kernel: usb usb1: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 1-0:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 5 08:36:05 localhost kernel: GSI 21 sharing vector 0xC8 and IRQ 21
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 21 (level, low) -> IRQ 21
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
Nov 5 08:36:05 localhost kernel: usb usb2: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 2-0:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 5 08:36:05 localhost kernel: GSI 22 sharing vector 0xD0 and IRQ 22
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
Nov 5 08:36:05 localhost kernel: usb usb3: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 3-0:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 5 08:36:05 localhost kernel: GSI 23 sharing vector 0xD8 and IRQ 23
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 5 08:36:05 localhost kernel: uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
Nov 5 08:36:05 localhost kernel: usb usb4: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 4-0:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 4-0:1.0: 2 ports detected
Nov 5 08:36:05 localhost kernel: Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa44713/0x200000
Nov 5 08:36:05 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2
Nov 5 08:36:05 localhost kernel: input: SynPS/2 Synaptics TouchPad as /class/input/input1
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
Nov 5 08:36:05 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Nov 5 08:36:05 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 5 08:36:05 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 5 08:36:05 localhost kernel: ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
Nov 5 08:36:05 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Nov 5 08:36:05 localhost kernel: usb usb5: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 5-0:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 5-0:1.0: 8 ports detected
Nov 5 08:36:05 localhost kernel: SCSI subsystem initialized
Nov 5 08:36:05 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 17
Nov 5 08:36:05 localhost kernel: ata: 0x170 IDE port busy
Nov 5 08:36:05 localhost kernel: ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
Nov 5 08:36:05 localhost kernel: scsi0 : ata_piix
Nov 5 08:36:05 localhost kernel: ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
Nov 5 08:36:05 localhost kernel: ata1.00: ata1: dev 0 multi count 8
Nov 5 08:36:05 localhost kernel: ata1.00: configured for UDMA/133
Nov 5 08:36:05 localhost kernel: Vendor: ATA Model: ST980825AS Rev: 8.04
Nov 5 08:36:05 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 5 08:36:05 localhost kernel: SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Nov 5 08:36:05 localhost kernel: sda: Write Protect is off
Nov 5 08:36:05 localhost kernel: SCSI device sda: drive cache: write back
Nov 5 08:36:05 localhost kernel: SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Nov 5 08:36:05 localhost kernel: sda: Write Protect is off
Nov 5 08:36:05 localhost kernel: SCSI device sda: drive cache: write back
Nov 5 08:36:05 localhost kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
Nov 5 08:36:05 localhost kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 5 08:36:05 localhost kernel: usb 1-1: device not accepting address 2, error -71
Nov 5 08:36:05 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 5 08:36:05 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 5 08:36:05 localhost kernel: SELinux: Disabled at runtime.
Nov 5 08:36:05 localhost kernel: SELinux: Unregistering netfilter hooks
Nov 5 08:36:05 localhost kernel: audit(1194251726.384:2): selinux=0 auid=4294967295
Nov 5 08:36:05 localhost kernel: usb 5-8: new high speed USB device using ehci_hcd and address 3
Nov 5 08:36:05 localhost kernel: usb 5-8: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 5-8:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 5-8:1.0: 4 ports detected
Nov 5 08:36:05 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 4
Nov 5 08:36:05 localhost kernel: usb 1-1: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 1-1:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 1-1:1.0: 4 ports detected
Nov 5 08:36:05 localhost kernel: usb 5-8.1: new low speed USB device using ehci_hcd and address 4
Nov 5 08:36:05 localhost kernel: usb 5-8.1: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: input: Logitech Optical USB Mouse as /class/input/input2
Nov 5 08:36:05 localhost kernel: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-8.1
Nov 5 08:36:05 localhost kernel: usb 5-8.3: new full speed USB device using ehci_hcd and address 5
Nov 5 08:36:05 localhost kernel: usb 5-8.3: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 5-8.3:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 5-8.3:1.0: 4 ports detected
Nov 5 08:36:05 localhost kernel: usb 1-1.2: new full speed USB device using uhci_hcd and address 5
Nov 5 08:36:05 localhost kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: hub 1-1.2:1.0: USB hub found
Nov 5 08:36:05 localhost kernel: hub 1-1.2:1.0: 3 ports detected
Nov 5 08:36:05 localhost kernel: usb 1-1.4: new full speed USB device using uhci_hcd and address 6
Nov 5 08:36:05 localhost kernel: usb 1-1.4: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: usb 5-8.3.2: new full speed USB device using ehci_hcd and address 6
Nov 5 08:36:05 localhost kernel: sdhci: Secure Digital Host Controller Interface driver, 0.12
Nov 5 08:36:05 localhost kernel: sdhci: Copyright(c) Pierre Ossman
Nov 5 08:36:05 localhost kernel: sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:03:01.1 -> GSI 18 (level, low) -> IRQ 18
Nov 5 08:36:05 localhost kernel: mmc0: SDHCI at 0xecbff400 irq 18 DMA
Nov 5 08:36:05 localhost kernel: usb 5-8.3.2: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 17
Nov 5 08:36:05 localhost kernel: tg3.c:v3.65 (August 07, 2006)
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
Nov 5 08:36:05 localhost kernel: eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:18:8b:cc:d1:d0
Nov 5 08:36:05 localhost kernel: eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
Nov 5 08:36:05 localhost kernel: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Nov 5 08:36:05 localhost kernel: input: PC Speaker as /class/input/input3
Nov 5 08:36:05 localhost kernel: usb 5-8.3.3: new full speed USB device using ehci_hcd and address 7
Nov 5 08:36:05 localhost kernel: usb 5-8.3.3: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 5 08:36:05 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
Nov 5 08:36:05 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ecbff800-ecbfffff] Max Packet=[2048] IR/IT contexts=[4/4]
Nov 5 08:36:05 localhost kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Nov 5 08:36:05 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 5 08:36:05 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 5 08:36:05 localhost kernel: usb 1-1.2.2: new full speed USB device using uhci_hcd and address 7
Nov 5 08:36:05 localhost kernel: Intel 82802 RNG detected
Nov 5 08:36:05 localhost kernel: usb 1-1.2.2: configuration #1 chosen from 1 choice
Nov 5 08:36:05 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
Nov 5 08:36:05 localhost kernel: Bluetooth: Core ver 2.10
Nov 5 08:36:05 localhost kernel: NET: Registered protocol family 31
Nov 5 08:36:05 localhost kernel: Bluetooth: HCI device and connection manager initialized
Nov 5 08:36:05 localhost kernel: Bluetooth: HCI socket layer initialized
Nov 5 08:36:05 localhost kernel: usbcore: registered new driver usbserial
Nov 5 08:36:05 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Nov 5 08:36:05 localhost kernel: usbcore: registered new driver usbserial_generic
Nov 5 08:36:05 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Nov 5 08:36:05 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Nov 5 08:36:05 localhost kernel: pl2303 5-8.3.2:1.0: pl2303 converter detected
Nov 5 08:36:05 localhost kernel: usb 5-8.3.2: pl2303 converter now attached to ttyUSB0
Nov 5 08:36:05 localhost kernel: pl2303 5-8.3.3:1.0: pl2303 converter detected
Nov 5 08:36:05 localhost kernel: usb 5-8.3.3: pl2303 converter now attached to ttyUSB1
Nov 5 08:36:05 localhost kernel: usbcore: registered new driver pl2303
Nov 5 08:36:05 localhost kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Nov 5 08:36:05 localhost kernel: Bluetooth: HCI USB driver ver 2.9
Nov 5 08:36:05 localhost kernel: usbcore: registered new driver hci_usb
Nov 5 08:36:05 localhost kernel: floppy0: no floppy controllers found
Nov 5 08:36:05 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 5 08:36:05 localhost kernel: floppy0: no floppy controllers found
Nov 5 08:36:05 localhost kernel: parport: PnPBIOS parport detected.
Nov 5 08:36:05 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Nov 5 08:36:05 localhost kernel: lp0: using parport0 (interrupt-driven).
Nov 5 08:36:05 localhost kernel: lp0: console ready
Nov 5 08:36:05 localhost kernel: NET: Registered protocol family 10
Nov 5 08:36:05 localhost kernel: lo: Disabled Privacy Extensions
Nov 5 08:36:05 localhost kernel: IPv6 over IPv4 tunneling driver
Nov 5 08:36:05 localhost kernel: ACPI: AC Adapter [AC] (on-line)
Nov 5 08:36:05 localhost kernel: ACPI: Battery Slot [BAT0] (battery present)
Nov 5 08:36:05 localhost kernel: ACPI: Lid Switch [LID]
Nov 5 08:36:05 localhost kernel: ACPI: Power Button (CM) [PBTN]
Nov 5 08:36:05 localhost kernel: ACPI: Sleep Button (CM) [SBTN]
Nov 5 08:36:05 localhost kernel: ACPI: ACPI Dock Station Driver
Nov 5 08:36:05 localhost kernel: ibm_acpi: ec object not found
Nov 5 08:36:05 localhost kernel: ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Nov 5 08:36:05 localhost kernel: md: Autodetecting RAID arrays.
Nov 5 08:36:05 localhost kernel: md: autorun ...
Nov 5 08:36:05 localhost kernel: md: ... autorun DONE.
Nov 5 08:36:05 localhost kernel: device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Nov 5 08:36:05 localhost kernel: device-mapper: multipath: version 1.0.4 loaded
Nov 5 08:36:05 localhost kernel: EXT3 FS on sda6, internal journal
Nov 5 08:36:05 localhost kernel: Adding 2048248k swap on /dev/sda7. Priority:-1 extents:1 across:2048248k
Nov 5 08:36:10 localhost gconfd (gavinet-2369): démarrage (version 2.14.0), pid 2369 utilisateur « gavinet »
Nov 5 08:36:10 localhost gconfd (gavinet-2369): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Nov 5 08:36:10 localhost gconfd (gavinet-2369): Adresse « xml:readwrite:/home/gavinet/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Nov 5 08:36:10 localhost gconfd (gavinet-2369): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Nov 5 08:36:13 localhost gconfd (gavinet-2369): Adresse « xml:readwrite:/home/gavinet/.gconf » résolue vers une source de configuration accessible en écriture à la position 0
Nov 5 08:36:28 localhost gconfd (root-2520): démarrage (version 2.14.0), pid 2520 utilisateur « root »
Nov 5 08:36:28 localhost gconfd (root-2520): Adresse « xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source de configuration en lecture seule à la position 0
Nov 5 08:36:28 localhost gconfd (root-2520): Adresse « xml:readwrite:/root/.gconf » résolue vers une source de configuration accessible en écriture à la position 1
Nov 5 08:36:28 localhost gconfd (root-2520): Adresse « xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source de configuration en lecture seule à la position 2
Nov 5 08:36:31 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 5 08:36:33 localhost kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Nov 5 08:36:33 localhost kernel: tg3: eth0: Flow control is off for TX and off for RX.
Nov 5 08:36:33 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 5 08:38:37 localhost gconfd (gavinet-2369): Sortie
Nov 5 08:38:37 localhost gdm[2214]: Redémarrage de l'ordinateur en cours...
Nov 5 08:38:37 localhost escd: *** glibc detected *** ./escd: double free or corruption (out): 0x00007fff44414ba0 ***
Nov 5 08:38:38 localhost shutdown[2214]: shutting down for system reboot
Nov 5 08:38:40 localhost xinetd[2063]: Exiting...
Nov 5 08:38:40 localhost kernel: Kernel logging (proc) stopped.
Nov 5 08:38:40 localhost kernel: Kernel log daemon terminating.
Nov 5 08:38:41 localhost exiting on signal 15
--********************* /etc/hosts************************************
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost loopback
Merci
bumkele
