Bonjour à tous,
Je suis sous Fédora 7 sur un portable en dual boot, les deux OS fonctionnent bien mais sous linux, eh oui encore RT2500,
A quand une version installable sans "bidouiller" ?
Après avoir lu de nombreux tread dans divers forum et tenté des kilos de manip toujours rien, alors que sur le même PC sou XP (eh oui!) la carte fonctionne sans aucun problème.
Pour commencer voici l'erreur récupérée dans la configuration réseau:
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device wlan0 ; Operation not supported.
Définition des informations IP pour wlan0.dhclient(7837) is already running - exiting.
This version of ISC DHCP is based on the release available
on
ftp.isc.org. Features have been added and other changes
have been made to the base software release in order to make
it work better with this distribution.
Please report for this software via the Red Hat Bugzilla site:
http://bugzilla.redhat.com
exiting.
échoué.
Voici comme il t demandé dans un forum l'ensemble des éléments requis pour analyse:
[root@blt ~]# su -
[root@blt ~]# lspci -n
00:00.0 0600: 8086:7190 (rev 03)
00:01.0 0604: 8086:7191 (rev 03)
00:04.0 0607: 104c:ac1c (rev 01)
00:04.1 0607: 104c:ac1c (rev 01)
00:07.0 0680: 8086:7110 (rev 02)
00:07.1 0101: 8086:7111 (rev 01)
00:07.2 0c03: 8086:7112 (rev 01)
00:07.3 0680: 8086:7113 (rev 03)
00:08.0 0401: 125d:1978 (rev 10)
00:09.0 0200: 8086:1229 (rev 09)
00:09.1 0700: 11c1:0445
01:00.0 0300: 1002:4c4d (rev 64)
06:00.0 0280: 1814:0201 (rev 01)
[root@blt ~]# lsmod
Module Size Used by
autofs4 24645 2
hidp 26433 2
rfcomm 43481 0
l2cap 30145 10 hidp,rfcomm
bluetooth 57253 5 hidp,rfcomm,l2cap
sunrpc 159133 1
nf_conntrack_ftp 13761 0
nf_conntrack_netbios_ns 7105 0
nf_conntrack_ipv4 15049 12
xt_state 6593 12
nf_conntrack 61001 4 nf_conntrack_ftp,nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_state
nfnetlink 10841 2 nf_conntrack_ipv4,nf_conntrack
xt_tcpudp 7233 14
ipt_REJECT 8641 2
iptable_filter 6977 1
ip_tables 16389 1 iptable_filter
x_tables 18757 4 xt_state,xt_tcpudp,ipt_REJECT,ip_tables
dm_multipath 21705 0
video 21065 0
sbs 19173 0
i2c_ec 9281 1 sbs
button 12113 0
dock 13669 0
battery 14149 0
ac 9413 0
ipv6 276673 32
lp 15977 0
loop 19785 0
radio_maestro 12097 0
compat_ioctl32 5569 1 radio_maestro
videodev 30145 1 radio_maestro
v4l2_common 20033 1 videodev
v4l1_compat 16581 2 radio_maestro,videodev
snd_es1968 32481 1
gameport 19017 1 snd_es1968
snd_ac97_codec 96357 1 snd_es1968
ac97_bus 6465 1 snd_ac97_codec
snd_seq_dummy 7877 0
snd_seq_oss 33345 0
parport_pc 29797 0
snd_seq_midi_event 11073 1 snd_seq_oss
snd_seq 50353 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
parport 38025 2 lp,parport_pc
snd_pcm_oss 43489 0
snd_mixer_oss 19393 1 snd_pcm_oss
snd_pcm 74565 3 snd_es1968,snd_ac97_codec,snd_pcm_oss
serio_raw 10821 0
pcspkr 7105 0
arc4 6209 2
ecb 7489 2
blkcipher 10181 1 ecb
rc80211_simple 8257 1
rt2500pci 20801 0
rt2x00pci 13633 1 rt2500pci
rt2x00lib 18625 2 rt2500pci,rt2x00pci
mac80211 145609 4 rc80211_simple,rt2500pci,rt2x00pci,rt2x00lib
cfg80211 12105 1 mac80211
irda 118009 0
crc_ccitt 6337 1 irda
snd_timer 24773 2 snd_seq,snd_pcm
snd_page_alloc 13769 2 snd_es1968,snd_pcm
snd_mpu401_uart 12225 1 snd_es1968
snd_rawmidi 26561 1 snd_mpu401_uart
snd_seq_device 11853 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 53189 13 snd_es1968,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 11553 1 snd
eeprom_93cx6 7361 1 rt2500pci
e100 37193 0
i2c_piix4 12493 0
mii 9409 1 e100
i2c_core 24641 2 i2c_ec,i2c_piix4
floppy 58565 0
sr_mod 20197 0
cdrom 37217 1 sr_mod
joydev 13441 0
sg 37213 0
dm_snapshot 20709 0
dm_zero 6209 0
dm_mirror 24277 0
dm_mod 57229 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror
ata_piix 18757 2
ata_generic 12101 0
libata 115417 2 ata_piix,ata_generic
sd_mod 23873 3
scsi_mod 137549 4 sr_mod,sg,libata,sd_mod
ext3 125385 2
jbd 59881 1 ext3
mbcache 12357 1 ext3
ehci_hcd 35405 0
ohci_hcd 23749 0
uhci_hcd 26833 0
[root@blt ~]# dmesg | grep rt
sanitize start
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1
copy_e820_map() start: 000000000fff0000 size: 0000000000003800 end: 000000000fff3800 type: 2
copy_e820_map() start: 000000000fff3800 size: 000000000000c800 end: 0000000010000000 type: 4
ACPI: PM-Timer IO Port: 0x5008
Allocating PCI resources starting at 20000000 (gap: 10000000:f0000000)
Enabling unmasked SIMD FPU exception support... done.
virtual kernel memory layout:
SELinux: Starting in permissive mode
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
ACPI: (supports S0 S1 S3 S4 S5)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x800-0x87f has been reserved
pnp: 00:0c: ioport range 0x4000-0x400f has been reserved
pnp: 00:0c: ioport range 0x5000-0x5063 could not be reserved
pnp: 00:0c: ioport range 0x6004-0x6005 has been reserved
pnp: 00:0c: ioport range 0xf000-0xf0cf has been reserved
ACPI: Processor [C0B4] (supports 8 throttling states)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0x50000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Using IPI No-Shortcut mode
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
hub 1-0:1.0: 2 ports detected
pccard: CardBus card inserted into slot 1
hub 1-1:1.0: 4 ports detected
ata2: port disabled. ignoring.
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting. Commit interval 5 seconds
cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Loading module: rt2500pci - 2.0.0 by http://rt2x00.serialmonkey.com.
parport: PnPBIOS parport detected.
kjournald starting. Commit interval 5 seconds
[root@blt ~]# ls /lib/firmware
ipw2100-1.3.fw ipw-2.4-boot.fw ipw-2.4-sniffer_ucode.fw
ipw2100-1.3-i.fw ipw-2.4-bss.fw iwlwifi-3945.ucode
ipw2100-1.3-p.fw ipw-2.4-bss_ucode.fw LICENSE.ipw2100
ipw2200-bss.fw ipw-2.4-ibss.fw LICENSE.ipw2200
ipw2200-ibss.fw ipw-2.4-ibss_ucode.fw zd1211
ipw2200-sniffer.fw ipw-2.4-sniffer.fw
[root@blt ~]# cat /etc/modprobe.conf /etc/modprobe.d/rt*
alias eth0 e100
cat: /etc/modprobe.d/rt*: No such file or directory
[root@blt ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.457 GHz Access Point: Not-Associated
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@blt ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:D0:59:65:BC:D5
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::2d0:59ff:fe65:bcd5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50897 errors:0 dropped:0 overruns:0 frame:0
TX packets:35199 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:72694648 (69.3 MiB) TX bytes:2489565 (2.3 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:207642 errors:0 dropped:0 overruns:0 frame:0
TX packets:207642 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:152089845 (145.0 MiB) TX bytes:152089845 (145.0 MiB)
wlan0 Link encap:Ethernet HWaddr 00:0A:78:8B:02:20
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:9840 (9.6 KiB)
wmaster0 Link encap:UNSPEC HWaddr 00-0A-78-8B-02-20-78-4F-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:50897 errors:0 dropped:0 overruns:0 frame:0
TX packets:35199 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:72694648 (69.3 MiB) TX bytes:2489565 (2.3 MiB)
[
Bon heureusement que j'ai un cable!!
Si l'un d'entre vous a une piste, simple de mise en oeuvre, je suis preneur
Merci d'avance
@+
