ca marche:
smartctl version 5.37 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
No Errors Logged
il doit me manquer un lien
pour hdb:
[root@localhost ~]# /usr/sbin/smartctl -l error /dev/hdb
smartctl version 5.37 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 169 inconsistent with error log pointer 5
ATA Error Count: 169 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 169 occurred at disk power-on lifetime: 17541 hours (730 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 bf 96 d6 f0 Error: UNC 16 sectors at LBA = 0x00d696bf = 14063295
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 bf 96 d6 f0 00 2d+06:07:38.928 READ DMA EXT
25 00 30 07 ba f8 f0 00 2d+06:07:38.896 READ DMA EXT
25 00 40 c7 b9 f8 f0 00 2d+06:07:38.896 READ DMA EXT
25 00 40 87 b9 f8 f0 00 2d+06:07:38.896 READ DMA EXT
25 00 40 47 b9 f8 f0 00 2d+06:07:38.896 READ DMA EXT
Error 168 occurred at disk power-on lifetime: 17540 hours (730 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1f 7f d0 8d f0 Error: UNC 31 sectors at LBA = 0x008dd07f = 9293951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 30 7f d0 8d f0 00 2d+06:06:59.008 READ DMA EXT
25 00 10 8f d6 8b f0 00 2d+06:06:58.992 READ DMA EXT
25 00 11 7f 6b e9 f0 00 2d+06:06:58.976 READ DMA EXT
25 00 40 3f 6b e9 f0 00 2d+06:06:58.976 READ DMA EXT
25 00 10 2f 6b e9 f0 00 2d+06:06:58.976 READ DMA EXT
Error 167 occurred at disk power-on lifetime: 17060 hours (710 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 bf 96 d6 f0 Error: UNC 16 sectors at LBA = 0x00d696bf = 14063295
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 bf 96 d6 f0 00 15:06:59.824 READ DMA EXT
25 00 30 07 ba f8 f0 00 15:06:59.792 READ DMA EXT
25 00 40 c7 b9 f8 f0 00 15:06:59.792 READ DMA EXT
25 00 40 87 b9 f8 f0 00 15:06:59.792 READ DMA EXT
25 00 40 47 b9 f8 f0 00 15:06:59.792 READ DMA EXT
Error 166 occurred at disk power-on lifetime: 17060 hours (710 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1f 7f d0 8d f0 Error: UNC 31 sectors at LBA = 0x008dd07f = 9293951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 30 7f d0 8d f0 00 15:05:01.616 READ DMA EXT
25 00 10 8f d6 8b f0 00 15:05:01.600 READ DMA EXT
25 00 11 7f 6b e9 f0 00 15:05:01.488 READ DMA EXT
25 00 40 3f 6b e9 f0 00 15:05:01.488 READ DMA EXT
25 00 10 2f 6b e9 f0 00 15:05:01.472 READ DMA EXT
Error 165 occurred at disk power-on lifetime: 16373 hours (682 days + 5 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 f7 c9 f5 f0 Error: UNC 8 sectors at LBA = 0x00f5c9f7 = 16108023
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f7 c9 f5 f0 08 00:09:07.232 READ DMA EXT
35 00 01 e7 91 f0 f0 08 00:09:07.200 WRITE DMA EXT
35 00 08 bf 01 5e f0 08 00:09:07.200 WRITE DMA EXT
25 00 08 f7 c9 f5 f0 08 00:09:06.192 READ DMA EXT
25 00 08 cf 18 2f f0 08 00:09:06.192 READ DMA EXT
et pour le hda:
[root@localhost ~]# /usr/sbin/smartctl -l error /dev/hda
smartctl version 5.37 [i686-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
No Errors Logged
c'est bien ce que je pensais j'ai un disque qui est sur le point de me lacher...
merci bcp pour votre aide
EDIT:
pour le command not found c'est de ma faute j'avais pas bien recopié la commande il me manquait une lettre... :hammer: autant pour moi