Salut!
Pb récurent.. Donc la j'entend un bip du pc, je regarde et voici ce que j'ai dans le terminal (déja ouvert) qui apparait:
[root@msr /]#
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: Oops: 0000 [#1]
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: SMP
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: CPU: 0
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: EIP: 0060:[<c04811c2>] Tainted: P VLI
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: EFLAGS: 00010286 (2.6.20-1.2944.fc6 #1)
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: EIP is at dput+0xc/0xfd
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: eax: adf81f28 ebx: adf81f28 ecx: c1f10400 edx: edd11ed4
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: esi: adf81f28 edi: edd11e10 ebp: 00000000 esp: f7e35ee4
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: ds: 007b es: 007b ss: 0068
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: Process kswapd0 (pid: 209, ti=f7e35000 task=f7c08bd0 task.ti=f7e35000)
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: Stack: edd11e08 adf81f28 c04813fa f7d8983c edd11e08 c04815a2 0000005f 0000b2e8
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: f7ffa460 00000084 000000d0 c04815fe c045dddf c0705f00 00016066 00005819
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: 002cba00 00000000 002cba00 00056adc 00000080 00000000 00000000 00000002
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: Call Trace:
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c04813fa>] prune_one_dentry+0x54/0x60
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c04815a2>] prune_dcache+0xe3/0x129
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c04815fe>] shrink_dcache_memory+0x16/0x2d
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c045dddf>] shrink_slab+0xd9/0x13e
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c045e174>] kswapd+0x2b4/0x3bb
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c0437725>] autoremove_wake_function+0x0/0x35
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c045dec0>] kswapd+0x0/0x3bb
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c043766b>] kthread+0xb0/0xd9
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c04375bb>] kthread+0x0/0xd9
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: [<c0404b33>] kernel_thread_helper+0x7/0x10
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: =======================
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: Code: 01 da 6b da 0b 49 47 83 f9 ff 75 e6 89 f0 89 e2 89 1c 24 e8 04 fe ff ff 83 c4 0c 5b 5e 5f c3 56 85 c0 53 89 c3 0f 84 ee 00 00 00 <83> 3b 01 75 14 ba a0 00 00 00 b8 f2 4a 6b c0 e8 41 ff f9 ff e8
Message from syslogd@msr at Wed Apr 18 19:35:42 2007 ...
msr kernel: EIP: [<c04811c2>] dput+0xc/0xfd SS:ESP 0068:f7e35ee4
Sur le système, tourne en tache de fond apache, vsftpd, mysql, du streaming .......
La il y avait une session d'ouverte avec le terminal d'ouvert et amule.
Lorsqu'il il y a aucune session d'ouverte aucun pb.
Ce n'est pas la ram, elle à été testée pendant 75h !!!!
Un ptit coup de dmseg:
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ab000 soft=c078b000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1549372k/1572800k available (2189k kernel code, 22136k reserved, 1159k data, 236k init, 655296k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc074b000 - 0xc0786000 ( 236 kB)
.data : 0xc0623649 - 0xc0745494 (1159 kB)
.text : 0xc0400000 - 0xc0623649 (2189 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3342.42 BogoMIPS (lpj=1671214)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: AMD Mobile AMD Athlon(v90{P-M stepping 00
Total of 1 processors activated (3342.42 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=40 bytes
sizeof(inode)=420 bytes
sizeof(dentry)=144 bytes
sizeof(ext3inode)=596 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1408 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
0000:00:09.0: cannot adjust BAR0 (not I/O)
0000:00:09.0: cannot adjust BAR1 (not I/O)
0000:00:09.0: cannot adjust BAR2 (not I/O)
0000:00:09.0: cannot adjust BAR3 (not I/O)
Boot video device is 0000:03:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5500-0x553f has been reserved
PCI: Bridge: 0000:00:08.0
IO window: a000-bfff
MEM window: d8000000-d9ffffff
PREFETCH window: d4000000-d4ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: d6000000-d7ffffff
PREFETCH window: c0000000-cfffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1539k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1176881770.800:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 93BB43D45D46D1B4
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 4D040H2, ATA DISK drive
hdb: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: WDC WD2500JB-00GVC0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63<6>hda: hw_config=403b
, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 512KiB
hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63<6>hdd: hw_config=6b00
, UDMA(100)
hdd: cache flushes supported
hdd: hdd1
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: Trying ACPI perflib
powernow: ACPI perflib can not be used in this platform
powernow: ACPI and legacy methods failed
powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml
powernow-k8: Processor cpuid 6a0 not supported
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 236k freed
Write protecting the kernel read-only data: 841k
Time: tsc clocksource has been installed.
firmware_class: attempt to set timeout to 10
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 16, io mem 0xda084000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 17, io mem 0xda081000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 18, io mem 0xda082000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
sata_sil 0000:01:0b.0: version 2.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19
ata1: SATA max UDMA/100 cmd 0xF886A080 ctl 0xF886A08A bmdma 0xF886A000 irq 19
ata2: SATA max UDMA/100 cmd 0xF886A0C0 ctl 0xF886A0CA bmdma 0xF886A008 irq 19
scsi0 : sata_sil
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : sata_sil
ata2: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: Attached scsi disk sda
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1176881778.547:2): selinux=0 auid=4294967295
gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 693kHz
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input2
Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 20
skge 1.9 addr 0xd9000000 irq 20 chip Yukon-Lite rev 9
skge eth0: addr 00:11:d8:59:88:e7
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Invalid Mac address detected: 00:00:00:00:00:00
Please complain to your hardware vendor. Switching to a random MAC.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 21
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:01:09.0, irq: 20, latency: 32, mmio: 0xd4000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=9 tuner=3 radio=no stereo=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bt878: Unknown symbol bttv_read_gpio
bt878: Unknown symbol bttv_write_gpio
bt878: Unknown symbol bttv_gpio_enable
tuner 2-0060: All bytes are equal. It is not a TEA5767
tuner 2-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 2-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
tuner 2-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 50703 usecs
intel8x0: clocking to 47411
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
No dock devices found.
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1020116k swap on /dev/hda3. Priority:-1 extents:1 across:1020116k
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:03:00.0 into 4x mode
**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 3:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 3:00.0] forgot to specify physical device; fix it!
**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 3:00.0] forgot to specify physical device; fix it!
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4811
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
scsi 2:0:0:0: Direct-Access HP PSC 16xx 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
drivers/usb/class/usblp.c: usblp0: removed
loop: loaded (max 8 devices)
BUG: unable to handle kernel paging request at virtual address adf81f28
printing eip:
c04811c2
*pde = 00000000
Oops: 0000 [#1]
SMP
last sysfs file: /block/ram0/dev
Modules linked in: loop vfat msdos fat ppdev usblp usb_storage autofs4 hidp l2cap bluetooth sunrpc dm_multipath video sbs i2c_ec dock button battery asus_acpi backlight ac ipv6 lp snd_intel8x0 snd_ac97_codec ac97_bus snd_seq_dummy sg tuner bttv video_buf ir_common snd_seq_oss nvidia(P)(U) compat_ioctl32 i2c_algo_bit snd_seq_midi_event snd_seq parport_pc btcx_risc ide_cd snd_pcm_oss snd_mixer_oss snd_mpu401 i2c_nforce2 snd_pcm tveeprom parport forcedeth snd_mpu401_uart skge i2c_core videodev pcspkr v4l2_common floppy snd_rawmidi v4l1_compat ns558 snd_seq_device gameport snd_timer snd cdrom snd_page_alloc soundcore dm_snapshot dm_zero dm_mirror dm_mod sata_sil sata_nv libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
CPU: 0
EIP: 0060:[<c04811c2>] Tainted: P VLI
EFLAGS: 00010286 (2.6.20-1.2944.fc6 #1)
EIP is at dput+0xc/0xfd
eax: adf81f28 ebx: adf81f28 ecx: c1f10400 edx: edd11ed4
esi: adf81f28 edi: edd11e10 ebp: 00000000 esp: f7e35ee4
ds: 007b es: 007b ss: 0068
Process kswapd0 (pid: 209, ti=f7e35000 task=f7c08bd0 task.ti=f7e35000)
Stack: edd11e08 adf81f28 c04813fa f7d8983c edd11e08 c04815a2 0000005f 0000b2e8
f7ffa460 00000084 000000d0 c04815fe c045dddf c0705f00 00016066 00005819
002cba00 00000000 002cba00 00056adc 00000080 00000000 00000000 00000002
Call Trace:
[<c04813fa>] prune_one_dentry+0x54/0x60
[<c04815a2>] prune_dcache+0xe3/0x129
[<c04815fe>] shrink_dcache_memory+0x16/0x2d
[<c045dddf>] shrink_slab+0xd9/0x13e
[<c045e174>] kswapd+0x2b4/0x3bb
[<c0437725>] autoremove_wake_function+0x0/0x35
[<c045dec0>] kswapd+0x0/0x3bb
[<c043766b>] kthread+0xb0/0xd9
[<c04375bb>] kthread+0x0/0xd9
[<c0404b33>] kernel_thread_helper+0x7/0x10
=======================
Code: 01 da 6b da 0b 49 47 83 f9 ff 75 e6 89 f0 89 e2 89 1c 24 e8 04 fe ff ff 83 c4 0c 5b 5e 5f c3 56 85 c0 53 89 c3 0f 84 ee 00 00 00 <83> 3b 01 75 14 ba a0 00 00 00 b8 f2 4a 6b c0 e8 41 ff f9 ff e8
EIP: [<c04811c2>] dput+0xc/0xfd SS:ESP 0068:f7e35ee4
Merci de votre aide
[llaumgui]Merci d'utiliser les balises bbCode au lieu de copier/coller du code indigeste ![/llaumgui]
