j'ai aussi quelque problème mon serveur plante seul sans que aucune manœuvrer ne soit commise .....
donc j'ai fais du memtest86 sans aucune probleme 24H de memtest sans aucune erreur je pense que c bon .... par contre quand je fais la commande
smartctl -a /dev/hda
j'ai ceci :
smartctl version 5.36 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE family
Device Model: WDC WD400JB-00JJC0
Serial Number: WD-WCAMA4613288
Firmware Version: 05.01C05
User Capacity: 40,020,664,320 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Apr 24 17:17:21 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1260) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 21
3 Spin_Up_Time 0x0003 168 163 021 Pre-fail Always - 2591
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 176
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1346
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 176
194 Temperature_Celsius 0x0022 101 090 000 Old_age Always - 42
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 300
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 3
SMART Error Log Version: 1
ATA Error Count: 21 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 21 occurred at disk power-on lifetime: 1340 hours (55 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1b ab de 41 e0 Error: UNC 27 sectors at LBA = 0x0041deab = 4316843
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 a6 de 41 00 48 00:01:16.985 READ DMA
c8 00 28 9e de 41 00 48 00:01:14.935 READ DMA
c8 00 30 96 de 41 00 48 00:01:12.880 READ DMA
c8 00 38 8e de 41 00 48 00:01:10.525 READ DMA
c8 00 40 86 de 41 00 48 00:01:08.620 READ DMA
Error 20 occurred at disk power-on lifetime: 1340 hours (55 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1b ab de 41 e0 Error: UNC 27 sectors at LBA = 0x0041deab = 4316843
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 9e de 41 00 48 00:01:14.935 READ DMA
c8 00 30 96 de 41 00 48 00:01:12.880 READ DMA
c8 00 38 8e de 41 00 48 00:01:10.525 READ DMA
c8 00 40 86 de 41 00 48 00:01:08.620 READ DMA
c8 00 48 7e de 41 00 48 00:01:06.415 READ DMA
Error 19 occurred at disk power-on lifetime: 1340 hours (55 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1b ab de 41 e0 Error: UNC 27 sectors at LBA = 0x0041deab = 4316843
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 30 96 de 41 00 48 00:01:12.880 READ DMA
c8 00 38 8e de 41 00 48 00:01:10.525 READ DMA
c8 00 40 86 de 41 00 48 00:01:08.620 READ DMA
c8 00 48 7e de 41 00 48 00:01:06.415 READ DMA
c8 00 50 76 de 41 00 48 00:01:04.510 READ DMA
Error 18 occurred at disk power-on lifetime: 1340 hours (55 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1b ab de 41 e0 Error: UNC 27 sectors at LBA = 0x0041deab = 4316843
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 8e de 41 00 48 00:01:10.525 READ DMA
c8 00 40 86 de 41 00 48 00:01:08.620 READ DMA
c8 00 48 7e de 41 00 48 00:01:06.415 READ DMA
c8 00 50 76 de 41 00 48 00:01:04.510 READ DMA
c8 00 58 6e de 41 00 48 00:01:02.305 READ DMA
Error 17 occurred at disk power-on lifetime: 1340 hours (55 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1b ab de 41 e0 Error: UNC 27 sectors at LBA = 0x0041deab = 4316843
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 86 de 41 00 48 00:01:08.620 READ DMA
c8 00 48 7e de 41 00 48 00:01:06.415 READ DMA
c8 00 50 76 de 41 00 48 00:01:04.510 READ DMA
c8 00 58 6e de 41 00 48 00:01:02.305 READ DMA
c8 00 60 66 de 41 00 48 00:01:00.400 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 78 -
# 2 Conveyance offline Completed without error 00% 78 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
qui me trouve 17 erreur ... donc quelqu'un c'est qu'il faut interpréter faire ....
