Ma carte graphique est une Radeon X1300. J'ai un Athlon 64 3200+ , une carte mère à base de Nforce 4.
Résultat du lspci:
[root@localhost /]# /sbin/lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a2)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Network controller: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
05:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300]
05:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300] (Secondary)
grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd1,1)
# kernel /vmlinuz-version ro root=/dev/VolGroup01/LogVol00
# initrd /initrd-version.img
#boot=/dev/hdc
default=0
timeout=5
splashimage=(hd1,1)/grub/splash.xpm.gz
hiddenmenu
title Fedora Core (2.6.18-1.2798.fc6)
root (hd1,1)
kernel /vmlinuz-2.6.18-1.2798.fc6 ro root=/dev/VolGroup01/LogVol00 rhgb quiet
initrd /initrd-2.6.18-1.2798.fc6.img
title Windows XP Pro
map (sda1) (sda0)
map (sda0) (sda1)
rootnoverify (sda1,0)
makeactive
chainloader +1
Pourriez-vous, au passage, me confirmer que la section Windows de mon grub.conf est correcte? Mon disque C est sda1.
Quant au log xorg, il est bien trop volumineux, je ne vous fournis donc que la fin. La majeure partie du ichier est répétitive: les 20 dernières lignes se répètent.
*Mode: 1e6 (1920x1440)
ModeAttributes: 0xbb
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0004f6b
BytesPerScanline: 7680
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xe0000000
LinBytesPerScanLine: 7680
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 400000000
(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(--) VESA(0): Virtual size is 1920x1440 (pitch 1920)
(**) VESA(0): *Built-in mode "1920x1440"
(**) VESA(0): *Built-in mode "1856x1392"
(**) VESA(0): *Built-in mode "1600x1200"
(**) VESA(0): *Built-in mode "1400x1050"
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1152x864"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): *Built-in mode "720x400"
(**) VESA(0): *Built-in mode "640x400"
(**) VESA(0): *Built-in mode "640x400"
(**) VESA(0): *Built-in mode "640x350"
(**) VESA(0): *Built-in mode "512x384"
(**) VESA(0): *Built-in mode "320x240"
(**) VESA(0): *Built-in mode "320x200"
(**) VESA(0): *Built-in mode "320x200"
(==) VESA(0): DPI set to (75, 75)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (122)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (121)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0xf2000000 - 0xf2003fff (0x4000) MX
[5] -1 0 0xf2006000 - 0xf20067ff (0x800) MX
[6] -1 0 0xf2004000 - 0xf2005fff (0x2000) MX
[7] -1 0 0xf2104000 - 0xf2104fff (0x1000) MX
[8] -1 0 0xf2102000 - 0xf2102fff (0x1000) MX
[9] -1 0 0xf2101000 - 0xf2101fff (0x1000) MX
[10] -1 0 0xf2106000 - 0xf2106fff (0x1000) MX[b]
[11] -1 0 0xf2105000 - 0xf21050ff (0x100) MX[b]
[12] -1 0 0xf2103000 - 0xf2103fff (0x1000) MX[b]
[13] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[b](B)
[14] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[b](B)
[15] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00008000 - 0x0000801f (0x20) IX[b]
[22] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[b]
[23] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[24] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[25] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[26] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[27] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[28] -1 0 0x0000c400 - 0x0000c40f (0x10) IX[b]
[29] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[30] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[31] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[32] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[34] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[35] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[36] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[37] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[38] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[39] -1 0 0x00009000 - 0x000090ff (0x100) IX[b](B)
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 9.12
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV515
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xe0000000,0x1000000)
(II) VESA(0): virtual address = 0xb6f33000,
physical address = 0xe0000000, size = 16777216
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Keyboard0: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: Core Pointer
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Je précise deux problèmes, bien que je ne pense pas que cela soit lié:
-Je ne peux pas utiliser des commandes directement, je suis obligé de préciser leur location. Par exemple, je suis obliger de rentrer /sbin/shutdown now au lieu de shutdown now.
-Le yum update via console fonctionne. Le programme "pup" lancé quand j'essaye de mettre à jour mes logiciels plante: il est resté bloqué une demi-heure sur le premier paquet.
