Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

clé USB Wifi DELL Wireless 1450

RENOO

Bonjour,
Je n'arrive pas a installer les drivers pour faire fonctionner ma clé USB Wifi Dell 1450.
J'ai bien vu que je n'étais pas le seul mais aucune discussion ne semble correspondre à ma clé !
J'ai essaye les drivers Prism pour linux fournies mais il ne se passe rien
Voici quelques commandes qui peuvent servir .
Dell Wireless 1450 Dual-band (802.11a/b/g) USB 2.0 Adapter

uname -a
Linux Rio 2.6.18-1.2798.fc6xen #1 SMP Mon Oct 16 15:11:19 EDT 2006 i686 i686 i386 GNU/Linux

/sbin/lsusb
Bus 005 Device 003: ID 413c:8104 Dell Computer Corp.

rpm --qf "%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH}\n" -q kernel
package kernel is not installed

Je ne sais pas trop ce qu'est un kernel mais c'est bizzard que cela ne soit pas installé!
meci d'avance de votre aide

drpixel

Tu utilises le kernel-xen !
yum install kernel

Elcheb

Sinon juste pour la traduction le Kernel c'est le Noyau, tout simplement...

kwizart

Essaies de prendre le fichier .inf du driver windows (et mets le dans des balises quote)
Cela permet de savoir quel chipset est intégré....

Sinon reste la solution ndiswrapper...

RENOO

Super mais comment je trouve le .inf du driver windows?
Et c'est grave d'utiliser le kernel de xen? Je n'ai pas de connection ethernet. J'effectuerai le "yum install kernel" lorsque jaurai un acces wifi. ok?

RENOO

Lorsque, à partir du paneau de configuration, j'affiche les proprietés du pilote de la clé USB ( sous XP) il y a 2 fichiers
C:\WINDOWS\system32\CoPrism.dll
C:\WINDOWS\system32\DRIVERS\PRISMA02.sys

Mais pas de fichiers .inf !!

RENOO

J'ai trouvé !! Mais il est long!

;***********************************************************************
; DELLNIC.INF
;
; Installation script for the Dell Wireless 1300 and 1450 USB2.0 WLAN Card Driver
; on Windows 2000 and XP.
;
; Copyright 2003, 2004 Dell Computer Corporation. All Rights Reserved.
;***********************************************************************

[Version]
DriverVer = 11/11/2005, 3.3.34.1
Signature = "$Windows NT$"
Compatible = 1
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %VER_VENDOR_STR%
CatalogFile = DELLNIC.cat

[ControlFlags]
;Exclude all PNP adapters from user selection
ExcludeFromSelect = *

[Manufacturer]
%VER_VENDOR_STR% = DeviceList

[DeviceList]
%A02_DESC_STR% = DELL_A02, USB\VID_413C&PID_8102
%A022_DESC_STR% = DELL_A022, USB\VID_413C&PID_8104

;==========
[DELL_A02.NT] ; Win2k
AddReg = DELL_A02.reg, COMMON_A02.reg, COMMON_NDIS.reg.NT, COMMON.reg
CopyFiles = DELL_DRIVER.copy.NT
BusType = 15
Characteristics= 0x84

[DELL_A02.NT.Services]
AddService= "DELL_A02", 2, DELL_DRIVER_A02.Service, DELL_DRIVER.EventLog

[DELL_A02.reg]
HKR,Ndi,DeviceID,0,"USB\VID_413C&PID_8102"
; 0x3890 = 14480
HKR,,PlatformID,0,14480
HKR,,VendorDesc,0,%A02_DESC_STR%

[DELL_A02.NT.CoInstallers]
CopyFiles = DellCoCopyFilesSection
AddReg = DellCoCopy.NT.CoInstallers_AddReg

[DELL_A022.NT] ; Win2k
AddReg = DELL_A022.reg, COMMON_A02.reg, COMMON_NDIS.reg.NT, COMMON.reg
CopyFiles = DELL_DRIVER.copy.NT
BusType = 15 ; PNP (allows USB)
Characteristics= 0x84

[DELL_A022.NT.Services]
AddService= "DELL_A02", 2, DELL_DRIVER_A02.Service, DELL_DRIVER.EventLog

[DELL_A022.reg]
HKR,Ndi,DeviceID,0,"USB\VID_413C&PID_8104"
; 0x3890 = 14480 0x3887 = 14471
HKR,,PlatformID,0,14480
HKR,,UsbVariant,0,14471
HKR,,VendorDesc,0,%A022_DESC_STR%
HKR,,FWFileName,0,"PRISMA02.arm"

[DELL_A022.NT.CoInstallers]
CopyFiles = DellCoCopyFilesSection
AddReg = DellCoCopy.NT.CoInstallers_AddReg

;###############################################################################
[DELL_DRIVER_A02.Service]
DisplayName = %A02_SERVICE_STR%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; NORMAL
ServiceBinary = %12%\PRISMA02.sys
LoadOrderGroup = NDIS

[DELL_DRIVER.EventLog]
AddReg = DELL_DRIVER.EventLog.reg

[DELL_DRIVER.EventLog.reg]
HKR, ,EventMessageFile ,0x00020000 ,"%%SystemRoot%%\System32\netevent.dll"
HKR, ,TypesSupported ,0x00010001 ,7

;###############################################################################

[COMMON_A02.reg]
HKR,NDI ,Service ,0 ,"DELL_A02"
HKR,NDI ,CardType ,0 ,"USB"
HKR, ,BusType ,0 ,"0"
HKR, ,DeviceVxDs ,0 ,"PRISMA02.sys"
;HKR, ,CardBusBridgeLatencyTimer ,0 ,"32"
;HKR, ,CardBusBridgeCacheLineSize ,0 ,"8"

[COMMON_NDIS.reg.NT]
HKR,NDI\Interfaces ,UpperRange ,0 ,"ndis5"
HKR,NDI\Interfaces ,LowerRange ,0 ,"ethernet"

[COMMON.reg]
HKR, ,PRISMIOC ,0 ,"1"
HKR, ,SilentInstall ,0 ,"1"
;Uncomment the line above to install without user interface prompts

HKR,,RTSThresh,0,2347
HKR,Ndi\params\RTSThresh,default,0,2347
HKR,NDI\params\RTSThresh,ParamDesc,0,%RTSTHRESH_STR%
HKR,NDI\params\RTSThresh,type,0,int
HKR,NDI\params\RTSThresh,flag,1,20,00,00,00
HKR,NDI\params\RTSThresh,min,0,0
HKR,NDI\params\RTSThresh,max,0,2347
HKR,NDI\params\RTSThresh,step,0,1
HKR,NDI\params\RTSThresh,optional,0,1

HKR,,FragThresh,0,2346
HKR,Ndi\params\FragThresh,default,0,2346
HKR,NDI\params\FragThresh,ParamDesc,0,%FRAGTHRESH_STR%
HKR,NDI\params\FragThresh,type,0,int
HKR,NDI\params\FragThresh,flag,1,20,00,00,00
HKR,NDI\params\FragThresh,min,0,256
HKR,NDI\params\FragThresh,max,0,2346
HKR,NDI\params\FragThresh,step,0,2
HKR,NDI\params\FragThresh,optional,0,1

HKR,,ShortRetryLimit,0,7
HKR,NDI\params\ShortRetryLimit,default,0,7
HKR,NDI\params\ShortRetryLimit,ParamDesc,,%SHORT_RETRY_STR%
HKR,NDI\params\ShortRetryLimit,type,,int
HKR,NDI\params\ShortRetryLimit,min,0,1
HKR,NDI\params\ShortRetryLimit,max,0,255
HKR,NDI\params\ShortRetryLimit,step,0,1
HKR,NDI\params\ShortRetryLimit,optional,0,1

HKR,,LongRetryLimit,0,4
HKR,NDI\params\LongRetryLimit,default,0,4
HKR,NDI\params\LongRetryLimit,ParamDesc,,%LONG_RETRY_STR%
HKR,NDI\params\LongRetryLimit,type,0,int
HKR,NDI\params\LongRetryLimit,min,0,1
HKR,NDI\params\LongRetryLimit,max,0,255
HKR,NDI\params\LongRetryLimit,step,0,1
HKR,NDI\params\LongRetryLimit,optional,0,1

HKR,,ConfigProfile,0,256
HKR,NDI\params\ConfigProfile,default,0,256
HKR,NDI\params\ConfigProfile,ParamDesc,,%CONFIG_PROFILE%
HKR,NDI\params\ConfigProfile,type,,enum
HKR,NDI\params\ConfigProfile,flag,1,30,00,00,00
HKR,NDI\params\ConfigProfile\enum,0,,%CONFIG_PROF_B_ONLY%
HKR,NDI\params\ConfigProfile\enum,1,,%CONFIG_PROF_MIXED%
HKR,NDI\params\ConfigProfile\enum,2,,%CONFIG_PROF_MIXED_LONG%
HKR,NDI\params\ConfigProfile\enum,3,,%CONFIG_PROF_G_ONLY%
HKR,NDI\params\ConfigProfile\enum,4,,%CONFIG_PROF_TEST%
HKR,NDI\params\ConfigProfile\enum,5,,%CONFIG_PROF_B_WIFI%
HKR,NDI\params\ConfigProfile\enum,6,,%CONFIG_PROF_MIXED_SHORT%
HKR,NDI\params\ConfigProfile\enum,256,,%CONFIG_PROF_WIFI_SPEC%
HKR,NDI\params\ConfigProfile,optional,0,1

HKR,,NitroMode,0,1
HKR,NDI\params\NitroMode,default,0,1
HKR,NDI\params\NitroMode,ParamDesc,,%NITRO_MODE%
HKR,NDI\params\NitroMode,type,,enum
HKR,NDI\params\NitroMode,flag,1,30,00,00,00
HKR,NDI\params\NitroMode\enum,0,,%OFF_STR%
HKR,NDI\params\NitroMode\enum,1,,%ON_STR%
HKR,NDI\params\NitroMode,optional,0,1

HKR,,PSMode,0,1
HKR,Ndi\params\PSMode,default,0,1
HKR,NDI\params\PSMode,ParamDesc,,%POWER_SAVE_STR%
HKR,NDI\params\PSMode,type,,enum
HKR,NDI\params\PSMode,flag,1,30,00,00,00
HKR,NDI\params\PSMode\enum,1,,%POWER_SAVE_OFF_STR%
HKR,NDI\params\PSMode\enum,2,,%POWER_SAVE_DYN_STR%
HKR,NDI\params\PSMode\enum,3,,%POWER_SAVE_MAX_STR%
HKR,NDI\params\PSMode,optional,0,1

HKR,,NonERPThresh,0,-2
HKR,Ndi\params\NonERPThresh,default,0,-2
HKR,NDI\params\NonERPThresh,ParamDesc,,%NONERP_STR%
HKR,NDI\params\NonERPThresh,type,,enum
HKR,NDI\params\NonERPThresh,flag,1,30,00,00,00
HKR,NDI\params\NonERPThresh\enum,0,,%NONERP_RTS%
HKR,NDI\params\NonERPThresh\enum,-1,,%NONERP_CTS%
HKR,NDI\params\NonERPThresh\enum,-2,,%NONERP_DYNAMIC%
HKR,NDI\params\NonERPThresh,optional,0,1

[DellCoCopy.NT.CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"CoPrism.dll,PrismCoInstaller"

;###############################################################################
[DestinationDirs]
;CopyFiles Section = Destination Directory ID -- see layout.inf
;----------------- ------------------------
DefaultDestDir = 11 ; Win9x=%windir%\system Win2k=%windir%\system32
DELL_DRIVER.copy.NT = 12 ; Win2k=%windir%\system32\drivers
DellCoCopyFilesSection = 11

[DELL_DRIVER.copy.NT]
PRISMA02.sys

[DellCoCopyFilesSection]
CoPrism.dll

[SourceDisksNames]
;Source Disk ID = Disk Name
;-------------- ---------
1 = %INSTALL_DISK_STR%,,,

[SourceDisksFiles] ; Win9x
;File Name = Source Disk ID
;--------- --------------
[SourceDisksFiles.X86] ; Win2k/Xp
PRISMA02.sys = 1
CoPrism.dll = 1

;###############################################################################
[Strings]
;String ID = String Text
;--------- -----------

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell Wireless 1300/1450 USB2.0 WLAN Install Disk"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN Card"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 WLAN Card Driver"

A022_DESC_STR = "Dell Wireless 1450 Dual-band (802.11a/b/g) USB2.0 Adapter"
A022_SERVICE_STR = "Dell Wireless 1450 Dual-band (802.11a/b/g) USB2.0 Adapter Driver"

ON_STR = "On"
OFF_STR = "Off"
RTSTHRESH_STR = "RTS Threshold"
FRAGTHRESH_STR = "Fragmentation Threshold"
POWER_SAVE_STR = "Power Save Mode"
POWER_SAVE_OFF_STR = "Disabled"
POWER_SAVE_DYN_STR = "Dynamic"
POWER_SAVE_MAX_STR = "Maximum"
SHORT_RETRY_STR = "Short Retry Limit"
LONG_RETRY_STR = "Long Retry Limit"
CONFIG_PROFILE = "Configuration Profile"
CONFIG_PROF_B_ONLY = "B only"
CONFIG_PROF_MIXED = "Mixed"
CONFIG_PROF_MIXED_LONG = "Mixed Long"
CONFIG_PROF_G_ONLY = "G only"
CONFIG_PROF_TEST = "Test"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Mixed Short"
CONFIG_PROF_WIFI_SPEC = "WiFi Spec"
NITRO_MODE = "Nitro Mode"
NONERP_STR = "Non-ERP Protection Type"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS to Self"
NONERP_DYNAMIC = "Dynamic"

[strings.0404]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell ?? 1300/1450 USB2.0 WLAN ????"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN ??"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 WLAN ??????"

A022_DESC_STR = "Dell ?? 1450 ??? (802.11a/b/g) USB2.0 ???"
A022_SERVICE_STR = "Dell ?? 1450 ??? (802.11a/b/g) USB2.0 ???????"

ON_STR = "??"
OFF_STR = "??"
RTSTHRESH_STR = "RTS ???"
FRAGTHRESH_STR = "?????"
POWER_SAVE_STR = "????"
POWER_SAVE_OFF_STR = "??"
POWER_SAVE_DYN_STR = "??"
POWER_SAVE_MAX_STR = "???"
SHORT_RETRY_STR = "????????"
LONG_RETRY_STR = "????????"
CONFIG_PROFILE = "?????"
CONFIG_PROF_B_ONLY = "?? B"
CONFIG_PROF_MIXED = "??"
CONFIG_PROF_MIXED_LONG = "?????"
CONFIG_PROF_G_ONLY = "?? G"
CONFIG_PROF_TEST = "??"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "?????"
CONFIG_PROF_WIFI_SPEC = "WiFi ??"
NITRO_MODE = "Nitro ??"
NONERP_STR = "? ERP ????"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS ???"
NONERP_DYNAMIC = "??"

[strings.0407]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell Wireless 1300/1450 USB2.0 WLAN-Installationsdisc"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN-Karte"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 WLAN-Kartentreiber"

A022_DESC_STR = "Dell Wireless 1450 Dual-Band (802.11a/b/g) USB2.0-Adapter"
A022_SERVICE_STR = "Dell Wireless 1450 Dual-Band (802.11a/b/g) USB2.0-Adaptertreiber"

ON_STR = "An"
OFF_STR = "Aus"
RTSTHRESH_STR = "RTS-Schwelle"
FRAGTHRESH_STR = "Fragmentierungsgrenze"
POWER_SAVE_STR = "Energiesparmodus"
POWER_SAVE_OFF_STR = "Deaktiviert"
POWER_SAVE_DYN_STR = "Dynamisch"
POWER_SAVE_MAX_STR = "Maximal"
SHORT_RETRY_STR = "Max. Wiederholungen - Klein"
LONG_RETRY_STR = "Max. Wiederholungen - Groß"
CONFIG_PROFILE = "Konfigurationsprofil"
CONFIG_PROF_B_ONLY = "Nur B"
CONFIG_PROF_MIXED = "Gemischt"
CONFIG_PROF_MIXED_LONG = "Gemischt - Lang"
CONFIG_PROF_G_ONLY = "Nur G"
CONFIG_PROF_TEST = "Test"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Gemischt - Kurz"
CONFIG_PROF_WIFI_SPEC = "WiFi-Spez."
NITRO_MODE = "Nitro-Modus"
NONERP_STR = "Nicht-ERP-Schutz"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS an Selbst"
NONERP_DYNAMIC = "Dynamisch"

[strings.0c0a]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Disco de instalación de WLAN USB2.0 inalámbrico Dell 1300/1450"

A02_DESC_STR = "Tarjeta WLAN USB2.0 Dell TrueMobile 1300"
A02_SERVICE_STR = "Controlador de tarjeta WLAN USB2.0 Dell TrueMobile 1300"

A022_DESC_STR = "Adaptador USB2.0 inalámbrico de doble banda (802.11a/b/g) Dell 1450"
A022_SERVICE_STR = "Controlador de adaptador USB2.0 inalámbrico de doble banda (802.11a/b/g)Dell 1450"

ON_STR = "Encendido"
OFF_STR = "Apagado"
RTSTHRESH_STR = "Umbral RTS"
FRAGTHRESH_STR = "Umbral de fragmentación"
POWER_SAVE_STR = "Modo de ahorro de energía"
POWER_SAVE_OFF_STR = "Desactivado"
POWER_SAVE_DYN_STR = "Dinámico"
POWER_SAVE_MAX_STR = "Máximo"
SHORT_RETRY_STR = "Límite de reintentos ante mayor umbral"
LONG_RETRY_STR = "Límite de reintentos ante menor umbral"
CONFIG_PROFILE = "Perfil de configuración"
CONFIG_PROF_B_ONLY = "Sólo B"
CONFIG_PROF_MIXED = "Mixto"
CONFIG_PROF_MIXED_LONG = "Mixto largo"
CONFIG_PROF_G_ONLY = "Sólo G"
CONFIG_PROF_TEST = "Prueba"
CONFIG_PROF_B_WIFI = "WiFi B"
CONFIG_PROF_MIXED_SHORT = "Mixto corto"
CONFIG_PROF_WIFI_SPEC = "Especificación WiFi"
NITRO_MODE = "Modo Nitro"
NONERP_STR = "Tipo de protección sin ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS autoactivado"
NONERP_DYNAMIC = "Dinámico"

[strings.040c]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Disque d'installation du WLAN USB 2.0 sans fil Dell 1300/1450"

A02_DESC_STR = "Carte WLAN USB 2.0 Dell TrueMobile 1300"
A02_SERVICE_STR = "Pilote de la carte WLAN USB 2.0 Dell TrueMobile 1300"

A022_DESC_STR = "Adaptateur USB 2.0 sans fil à double bande (802.11a/b/g) Dell 1450"
A022_SERVICE_STR = "Pilote de l'adaptateur USB 2.0 sans fil à double bande (802.11a/b/g) Dell 1450"

ON_STR = "Allumé"
OFF_STR = "Éteint"
RTSTHRESH_STR = "Seuil RTS"
FRAGTHRESH_STR = "Seuil de fragmentation"
POWER_SAVE_STR = "Mode d'économie d'énergie"
POWER_SAVE_OFF_STR = "Désactivé"
POWER_SAVE_DYN_STR = "Dynamique"
POWER_SAVE_MAX_STR = "Maximum"
SHORT_RETRY_STR = "Nbre max. d'essais : petit paquet"
LONG_RETRY_STR = "Nbre max. d'essais : paquet volumineux"
CONFIG_PROFILE = "Profil de configuration"
CONFIG_PROF_B_ONLY = "B uniquement"
CONFIG_PROF_MIXED = "Mixte"
CONFIG_PROF_MIXED_LONG = "Mixte long"
CONFIG_PROF_G_ONLY = "G uniquement"
CONFIG_PROF_TEST = "Test"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Mixte faible"
CONFIG_PROF_WIFI_SPEC = "Norme WiFi"
NITRO_MODE = "Mode Nitro"
NONERP_STR = "Type de protection non ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS à soi-même"
NONERP_DYNAMIC = "Dynamique"

[strings.0410]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Disco di installazione adattatore WLAN USB 2.0 wireless Dell 1300/1450"

A02_DESC_STR = "Scheda WLAN USB 2.0 Dell TrueMobile 1300"
A02_SERVICE_STR = "Driver scheda WLAN USB 2.0 Dell TrueMobile 1300 "

A022_DESC_STR = "Adattatore USB 2.0 wireless Dual-band (802.11a/b/g) Dell 1450 "
A022_SERVICE_STR = "Driver adattatore USB 2.0 dual-band (802.11a/b/g) wireless Dell 1450 "

ON_STR = "Acceso (On)"
OFF_STR = "Spento (Off)"
RTSTHRESH_STR = "Soglia RTS"
FRAGTHRESH_STR = "Soglia di frammentazione"
POWER_SAVE_STR = "Modalità Power save"
POWER_SAVE_OFF_STR = "Disabilitata"
POWER_SAVE_DYN_STR = "Dinamica"
POWER_SAVE_MAX_STR = "Massimo"
SHORT_RETRY_STR = "Limite inferiore di ritrasmissione"
LONG_RETRY_STR = "Limite superiore di ritrasmissione"
CONFIG_PROFILE = "Profilo di configurazione"
CONFIG_PROF_B_ONLY = "Solo B"
CONFIG_PROF_MIXED = "Misto"
CONFIG_PROF_MIXED_LONG = "Misto lungo"
CONFIG_PROF_G_ONLY = "Solo G"
CONFIG_PROF_TEST = "Test"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Misto breve"
CONFIG_PROF_WIFI_SPEC = "WiFi Spec"
NITRO_MODE = "Modalità Nitro"
NONERP_STR = "Tipo di protezione non ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS to Self"
NONERP_DYNAMIC = "Dinamica"

[strings.0411]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell ????? 1300/1450 USB2.0 WLAN ?????? ????"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN ???"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 WLAN ??? ????"

A022_DESC_STR = "Dell ????? 1450 ??????? (802.11a/b/g) USB2.0 ????"
A022_SERVICE_STR = "Dell ????? 1450 ??????? (802.11a/b/g) USB2.0 ???? ????"

ON_STR = "??"
OFF_STR = "??"
RTSTHRESH_STR = "RTS ????"
FRAGTHRESH_STR = "???????"
POWER_SAVE_STR = "??????"
POWER_SAVE_OFF_STR = "??"
POWER_SAVE_DYN_STR = "??"
POWER_SAVE_MAX_STR = "??"
SHORT_RETRY_STR = "?????????"
LONG_RETRY_STR = "????????"
CONFIG_PROFILE = "????????"
CONFIG_PROF_B_ONLY = "B ??"
CONFIG_PROF_MIXED = "??"
CONFIG_PROF_MIXED_LONG = "?????"
CONFIG_PROF_G_ONLY = "G ??"
CONFIG_PROF_TEST = "???"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "??????"
CONFIG_PROF_WIFI_SPEC = "WiFi ??"
NITRO_MODE = "Nitro ???"
NONERP_STR = "? ERP ?????"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "??? CTS"
NONERP_DYNAMIC = "??"

[strings.0412]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell ?? 1300/1450 USB 2.0 WLAN ?? ???"

A02_DESC_STR = "Dell TrueMobile 1300 USB 2.0 WLAN ??"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB 2.0 WLAN ?? ????"

A022_DESC_STR = "Dell ?? 1450 ?? ??(802.11a/b/g) USB 2.0 ???"
A022_SERVICE_STR = "Dell ?? 1450 ?? ??(802.11a/b/g) USB 2.0 ??? ????"

ON_STR = "?"
OFF_STR = "??"
RTSTHRESH_STR = "RTS ?? ?"
FRAGTHRESH_STR = "??? ?? ?"
POWER_SAVE_STR = "?? ?? ?? ??"
POWER_SAVE_OFF_STR = "????"
POWER_SAVE_DYN_STR = "???"
POWER_SAVE_MAX_STR = "??"
SHORT_RETRY_STR = "??? ?? ??? ?? ?? ??? ?? ??"
LONG_RETRY_STR = "??? ?? ??? ? ?? ??? ?? ??"
CONFIG_PROFILE = "?? ????"
CONFIG_PROF_B_ONLY = "B ??"
CONFIG_PROF_MIXED = "??"
CONFIG_PROF_MIXED_LONG = "?? ???"
CONFIG_PROF_G_ONLY = "G ??"
CONFIG_PROF_TEST = "???"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "?? ???"
CONFIG_PROF_WIFI_SPEC = "WiFi ??"
NITRO_MODE = "??? ??"
NONERP_STR = "?-ERP ?? ??"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS?? ??? "
NONERP_DYNAMIC = "???"

[strings.0415]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dysk instalacyjny adaptera Dell Wireless 1300/1450 USB2.0 WLAN"

A02_DESC_STR = "Karta sieciowa Dell TrueMobile 1300 USB2.0"
A02_SERVICE_STR = "Sterownik karty sieciowej Dell TrueMobile 1300 USB2.0"

A022_DESC_STR = "Dwupasmowy adapter Dell Wireless 1450 Dual-band (802.11a/b/g) USB2.0"
A022_SERVICE_STR = "Sterownik dwupasmowego adaptera Dell Wireless 1450 Dual Band (802.11a/b/g) USB2.0"

ON_STR = "W??czone"
OFF_STR = "Wy??czone"
RTSTHRESH_STR = "Próg RTS"
FRAGTHRESH_STR = "Próg fragmentacji"
POWER_SAVE_STR = "Tryb obni?onego poboru mocy"
POWER_SAVE_OFF_STR = "Wy??czone"
POWER_SAVE_DYN_STR = "Dynamiczne"
POWER_SAVE_MAX_STR = "Maksimum"
SHORT_RETRY_STR = "Liczba ponownych prób przy ma?ych pakietach"
LONG_RETRY_STR = "Liczba ponownych prób przy du?ych pakietach"
CONFIG_PROFILE = "Profil sprz?tu"
CONFIG_PROF_B_ONLY = "Tylko B"
CONFIG_PROF_MIXED = "Mieszany"
CONFIG_PROF_MIXED_LONG = "Mieszany d?ugodystansowy"
CONFIG_PROF_G_ONLY = "Tylko G"
CONFIG_PROF_TEST = "Testowy"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Mieszany krótkodystansowy"
CONFIG_PROF_WIFI_SPEC = "WiFi spec"
NITRO_MODE = "Tryb Nitro"
NONERP_STR = "Typ ochrony nie-ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS to self"
NONERP_DYNAMIC = "Dynamiczne"

[strings.0416]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Disco de Instalação do Dell Wireless 1300/1450 USB2.0 WLAN "

A02_DESC_STR = "Placa Dell TrueMobile 1300 USB2.0 WLAN "
A02_SERVICE_STR = "Driver da placa Dell TrueMobile 1300 USB2.0 WLAN "

A022_DESC_STR = "Adaptador Dell Wireless 1450 Dual-band (802.11a/b/g) USB2.0 "
A022_SERVICE_STR = "Adaptador Sem Fio Dell 1450 Dual-band (802.11a/b/g) USB2.0 "

ON_STR = "Ligado"
OFF_STR = "Desligado"
RTSTHRESH_STR = "Limiar de RTS"
FRAGTHRESH_STR = "Limiar de Fragmentação"
POWER_SAVE_STR = "Modo de economia de energia"
POWER_SAVE_OFF_STR = "Desativado"
POWER_SAVE_DYN_STR = "Dinâmico"
POWER_SAVE_MAX_STR = "Máximo"
SHORT_RETRY_STR = "Limite de retransmissão menor"
LONG_RETRY_STR = "Limite de retransmissão maior"
CONFIG_PROFILE = "Perfil de Configuração"
CONFIG_PROF_B_ONLY = "Somente B"
CONFIG_PROF_MIXED = "Misto"
CONFIG_PROF_MIXED_LONG = "Misto longo"
CONFIG_PROF_G_ONLY = "Somente G"
CONFIG_PROF_TEST = "Teste"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Misto curto"
CONFIG_PROF_WIFI_SPEC = "WiFi Spec"
NITRO_MODE = "Modo Nitro"
NONERP_STR = "Tipo de proteção não-ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS auto-habilitado"
NONERP_DYNAMIC = "Dinâmico"

[strings.0419]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "???????????? ???? ???????? ???????????? ???? Dell 1300/1450 USB2.0 WLAN"

A02_DESC_STR = "????? Dell TrueMobile 1300 USB2.0 WLAN"
A02_SERVICE_STR = "??????? ????? Dell TrueMobile 1300 USB2.0 WLAN"

A022_DESC_STR = "???????????? ??????? Dell 1450 USB2.0 ??? ???? ?????????? (802.11a/b/g)"
A022_SERVICE_STR = "??????? ????????????? ???????? Dell 1450 USB2.0 ??? ???? ?????????? (802.11a/b/g)"

ON_STR = "???."
OFF_STR = "????."
RTSTHRESH_STR = "????? RTS"
FRAGTHRESH_STR = "????? ???????"
POWER_SAVE_STR = "????? ???????? ???????????? ????????"
POWER_SAVE_OFF_STR = "?????????"
POWER_SAVE_DYN_STR = "???????????"
POWER_SAVE_MAX_STR = "????????????"
SHORT_RETRY_STR = "??????????? ?? ???????? ???????? ??????"
LONG_RETRY_STR = "??????????? ?? ???????? ???????? ??????"
CONFIG_PROFILE = "??????? ????????????"
CONFIG_PROF_B_ONLY = "?????? B"
CONFIG_PROF_MIXED = "?????????"
CONFIG_PROF_MIXED_LONG = "?????????, ???????"
CONFIG_PROF_G_ONLY = "?????? G"
CONFIG_PROF_TEST = "????"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "?????????, ???????"
CONFIG_PROF_WIFI_SPEC = "???????????? WiFi"
NITRO_MODE = "????? Nitro"
NONERP_STR = "?????? ?? ????????? ??? ERP"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS"
NONERP_DYNAMIC = "???????????"

[strings.041d]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell Wireless 1300/1450 USB2.0 WLAN Installationsskiva"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN-kort"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 drivrutin för WLAN-kort"

A022_DESC_STR = "Dell Wireless 1450 tvåbands (802.11a/b/g) USB2.0-adapter"
A022_SERVICE_STR = "Dell Wireless 1450 drivrutin för tvåbands (802.11a/b/g) USB2.0-adapter"

ON_STR = "På"
OFF_STR = "Av"
RTSTHRESH_STR = "Tröskelvärde för RTS"
FRAGTHRESH_STR = "Tröskelvärde för fragmentation"
POWER_SAVE_STR = "Energisparläge"
POWER_SAVE_OFF_STR = "Inaktiverat"
POWER_SAVE_DYN_STR = "Dynamiskt"
POWER_SAVE_MAX_STR = "Maximalt"
SHORT_RETRY_STR = "Återförsök för korta paket"
LONG_RETRY_STR = "Återförsök för långa paket"
CONFIG_PROFILE = "Konfigurationsprofil"
CONFIG_PROF_B_ONLY = "Endast B"
CONFIG_PROF_MIXED = "Blandad"
CONFIG_PROF_MIXED_LONG = "Blandad lång"
CONFIG_PROF_G_ONLY = "Endast G"
CONFIG_PROF_TEST = "Test"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "Blandad kort"
CONFIG_PROF_WIFI_SPEC = "WiFi spec"
NITRO_MODE = "Nitroläge"
NONERP_STR = "Icke-ERP-skyddstyp"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS till själv"
NONERP_DYNAMIC = "Dynamiskt"

[strings.0804]

VER_VENDOR_STR = "Dell"
INSTALL_DISK_STR = "Dell ?? 1300/1450 USB2.0 WLAN ????"

A02_DESC_STR = "Dell TrueMobile 1300 USB2.0 WLAN ??"
A02_SERVICE_STR = "Dell TrueMobile 1300 USB2.0 WLAN ??????"

A022_DESC_STR = "Dell ?? 1450 ??? (802.11a/b/g) USB2.0 ???"
A022_SERVICE_STR = "Dell ?? 1450 ??? (802.11a/b/g) USB2.0 ???????"

ON_STR = "??"
OFF_STR = "??"
RTSTHRESH_STR = "RTS ??"
FRAGTHRESH_STR = "????"
POWER_SAVE_STR = "????"
POWER_SAVE_OFF_STR = "??"
POWER_SAVE_DYN_STR = "??"
POWER_SAVE_MAX_STR = "???"
SHORT_RETRY_STR = "????????"
LONG_RETRY_STR = "????????"
CONFIG_PROFILE = "????"
CONFIG_PROF_B_ONLY = "?? B"
CONFIG_PROF_MIXED = "??"
CONFIG_PROF_MIXED_LONG = "????"
CONFIG_PROF_G_ONLY = "?? G"
CONFIG_PROF_TEST = "??"
CONFIG_PROF_B_WIFI = "B WiFi"
CONFIG_PROF_MIXED_SHORT = "????"
CONFIG_PROF_WIFI_SPEC = "WiFi ??"
NITRO_MODE = "Nitro ??"
NONERP_STR = "? ERP ????"
NONERP_RTS = "RTS/CTS"
NONERP_CTS = "CTS ???"
NONERP_DYNAMIC = "??"

kwizart

Effectivement Prisma est l'information la plus pertinente pour désigner le chipset, pour autant je ne sais pas si cela designe un chipset à base de prism ( voir wlan-ng disponible sur le dépot kwizart) ou prism54 (documenté de manière informelle sur le forum).
La lecture des propriété de la dll permet aussi de connaitre la société et ainsi le chipset utilisé mais dans le doute je te conseille d'utiliser ndiswrapper et ton driver windows...

RENOO

J'en déduis qu'il ne doit pas exister de driver linux pour ma clé. Je ne connais pas ndiwrapper. Je tappe ce mot sur google, je le télécharge et après il transforme mon driver xp en driver linux ?
Mais comment je trouve mon driver windows?
Encore merci d'avance

RENOO

euhhh help please, qu'est ce que je dois faire ??

MarbolanGos

Essaye la doc fedora : http://doc.fedora-fr.org/Wifi-Installation_g%C3%A9n%C3%A9rale

Ca parle un peu de ndiswrapper, par contre j'arrive jamais à retrouver le tuto sur ndiswrapper, quelqu'un doit l'avoir en signature je crois.

RENOO

Merci de ton aide.
il me semble qu'il existe le driver linux qui me permetrait de brancher ma clé (Prism 1300 ?? )
j'ai branché mon cable ethernet et effectué ( bon conseil de drpixel )

yum install kernel

maintenant j'obtiens

[root@Rio linux-wlan-ng-0.2.7]# uname -a
Linux Rio 2.6.18-1.2798.fc6xen #1 SMP Mon Oct 16 15:11:19 EDT 2006 i686 i686 i386 GNU/Linux

[root@Rio linux-wlan-ng-0.2.7]# rpm --qf "%{NAME}-%{VERSION}-%{RELEASE}-%{ARCH}\n" -q kernel
kernel-2.6.20-1.2925.fc6-i686

et toujours

[root@Rio linux-wlan-ng-0.2.7]# /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0471:0815 Philips
Bus 003 Device 002: ID 413c:3200 Dell Computer Corp.
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 004: ID 413c:2003 Dell Computer Corp.
Bus 005 Device 006: ID 0424:2502 Standard Microsystems Corp.
Bus 005 Device 007: ID 0424:2602 Standard Microsystems Corp.
Bus 005 Device 008: ID 0424:2228 Standard Microsystems Corp.
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 009: ID 041e:4055 Creative Technology, Ltd
Bus 005 Device 003: ID 413c:8104 Dell Computer Corp.
Bus 004 Device 001: ID 0000:0000

j'ai téléchargé les drivers linux-wlan-ng-0.2.7 et j'essayer de les installer en effectuant

[root@Rio linux-wlan-ng-0.2.7]# make config

-------------- Linux WLAN Configuration Script -------------

The default responses are correct for most users.

Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: n
Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [n]: n
Build Prism2.5 native PCI (_pci) driver? (y/n) [n]: n
Build Prism2.5 USB (_usb) driver? (y/n) [n]: y

Linux source directory [/lib/modules/2.6.18-1.2798.fc6xen/build]: /lib/modules/2.6.20-1.2925.fc6/
Linux source tree /lib/modules/2.6.20-1.2925.fc6/ is incomplete or missing!
    See the HOWTO for a list of FTP sites for current kernel sources.

Configuration failed

make: *** [config] Error 1

je dois avoir un probleme de kernel !
il faut que je rentre quelle adresse pour le linux source directory ????

MarbolanGos

En regardant le résultat des kernels installés, tu n'as pas installé les devel et les headers (je crois qu'il sont dépendants)

Un petit yum install kernel-devel kernel-header (ou headers ?)

Devrait résoudre le problème à la compilation. Fait attention à ce qu'il installe bien la version 686, avant de faire y.

kwizart

wlan-ng est disponible sur mon dépot, mais je dois le mettre à jour au préalable...

Ok la compilation réussi avec un patch:
http://people.debian.org/~terpstra/message/20070311.171456.0bd2fe7f.en.html

pour installer le module:

wget http://kwizart.free.fr/fedora/kwizart-release-6-1.noarch.rpm
rpm -ivh kwizart-release-6-1.noarch.rpm
yum --enablerepo=kwizart install kmod-wlan-ng

Normalement du dois voir une interface apparaitre (wlan0) si tu fait:
/sbin/ifconfig
voire si pas activeé
/sbin/ifconfig -a

pas sur du tout du résulat cela dit, tiens moi au courant si cela fonctionne!

RENOO

Bonsoir a tous,
De retour derriere ma machine, je tiens a vous remerciez sincerement de votre aide.
Je viens d'effectuer toutes les manoeuvres précédement citées et voici le resultat

[root@Rio renaud]# rpm -ivh kwizart-release-6-1.noarch.rpm
Preparing...                ########################################### [100%]
   1:kwizart-release        ########################################### [100%]
[root@Rio renaud]# yum --enablerepo=kwizart install kmod-wlan-ng
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
core                      100% |=========================| 1.1 kB    00:00
kwizart                   100% |=========================|  951 B    00:00
updates                   100% |=========================| 1.2 kB    00:00
extras                    100% |=========================| 1.1 kB    00:00
Reading repository metadata in from local files
primary.xml.gz            100% |=========================|  82 kB    00:00
################################################## 487/487
primary.xml.gz            100% |=========================| 523 kB    00:00
################################################## 1185/1185
primary.xml.gz            100% |=========================| 1.5 MB    00:02
################################################## 4686/4686
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for kmod-wlan-ng to pack into transaction set.
kmod-wlan-ng-0.2.7-1.2.6. 100% |=========================| 3.5 kB    00:00
---> Package kmod-wlan-ng.i686 0:0.2.7-1.2.6.20_1.2925.fc6 set to be installed
--> Running transaction check
--> Processing Dependency: wlan-ng-kmod-common >= 0.2.7 for package: kmod-wlan-ng
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Downloading header for wlan-ng to pack into transaction set.
wlan-ng-0.2.7-1.kwizart.f 100% |=========================|  10 kB    00:00
---> Package wlan-ng.i386 0:0.2.7-1.kwizart.fc6 set to be updated
--> Running transaction check

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Installing:
 kmod-wlan-ng            i686       0.2.7-1.2.6.20_1.2925.fc6  kwizart           149 k
Installing for dependencies:
 wlan-ng                 i386       0.2.7-1.kwizart.fc6  kwizart           323 k

Transaction Summary
=============================================================================
Install      2 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 471 k
Is this ok [y/N]: y
Downloading Packages:
(1/2): wlan-ng-0.2.7-1.kw 100% |=========================| 323 kB    00:00
(2/2): kmod-wlan-ng-0.2.7 100% |=========================| 149 kB    00:00
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 5b01f801
Importing GPG key 0x5B01F801 "Nicolas Chauvet (kwizart) <kwizart@gmail.com>"
Is this ok [y/N]: y
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing: kmod-wlan-ng                 ######################### [1/2]
  Installing: wlan-ng                      ######################### [2/2]
chkconfig version 1.3.30 - Copyright (C) 1997-2000 Red Hat, Inc.
This may be freely redistributed under the terms of the GNU Public License.

usage:   chkconfig --list [name]
         chkconfig --add <name>
         chkconfig --del <name>
         chkconfig [--level <levels>] <name> <on|off|reset|resetpriorities>
error: %post(wlan-ng-0.2.7-1.kwizart.fc6.i386) scriptlet failed, exit status 1

Installed: kmod-wlan-ng.i686 0:0.2.7-1.2.6.20_1.2925.fc6
Dependency Installed: wlan-ng.i386 0:0.2.7-1.kwizart.fc6
Complete!

C'est bizzard, a part une légère erreur, tout a l'air de s'être bien passé.
Malheureusement

[renaud@Rio ~]$ /sbin/ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:13:72:20:00:FC
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::213:72ff:fe20:fc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6274 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3892 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:9066282 (8.6 MiB)  TX bytes:307397 (300.1 KiB)
          Base address:0xdce0 Memory:fbee0000-fbf00000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1498 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2132552 (2.0 MiB)  TX bytes:2132552 (2.0 MiB)

🙁
C'est dommage, j'étais tellement content lorsque j'ai vu vos réponses !!

RENOO

Je suis troujours tres motivé pour installer ma clé USB pour mon PC :-D
Mais j'ai besoin d'un peu d'aide please.
Je ne sais vraiment pas quoi faire
Merci beaucoup d'avance

[renaud@Rio ~]$ uname -a
Linux Rio 2.6.20-1.2925.fc6 #1 SMP Sat Mar 10 19:15:16 EST 2007 i686 i686 i386 GNU/Linux
[renaud@Rio ~]$ lsusb
bash: lsusb: command not found
[renaud@Rio ~]$ /sbin/lsusb
Bus 003 Device 002: ID 413c:3200 Dell Computer Corp.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0471:0815 Philips
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 004: ID 413c:2003 Dell Computer Corp.
Bus 005 Device 007: ID 0424:2602 Standard Microsystems Corp.
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 006: ID 0424:2502 Standard Microsystems Corp.
Bus 005 Device 008: ID 0424:2228 Standard Microsystems Corp.
Bus 005 Device 003: ID 413c:8104 Dell Computer Corp.
[renaud@Rio ~]$ /sbin/ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:13:72:20:00:FC
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::213:72ff:fe20:fc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:88610 errors:0 dropped:0 overruns:0 frame:0
          TX packets:101600 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:67433873 (64.3 MiB)  TX bytes:8586153 (8.1 MiB)
          Base address:0xdce0 Memory:fbee0000-fbf00000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:7018 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7018 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3105509 (2.9 MiB)  TX bytes:3105509 (2.9 MiB)

RENOO

En ce qui concerne le chipset de ma carte je ne suis pas vraiment sur de moi. La liste présente dans tutorial ne coorespond pas exactement a mon modèle??
J'ai aussi Kinfocenter qui me done ID de ma carte mais???

On peut attacher une image présente sur mon disque dans les discussions ?

[root@Rio ~]# /sbin/lsusb
Bus 003 Device 001: ID 0000:0000
Bus 003 Device 002: ID 413c:3200 Dell Computer Corp.
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 0471:0815 Philips
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 004: ID 413c:2003 Dell Computer Corp.
Bus 005 Device 007: ID 0424:2602 Standard Microsystems Corp.
Bus 005 Device 006: ID 0424:2502 Standard Microsystems Corp.
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 008: ID 0424:2228 Standard Microsystems Corp.
Bus 005 Device 003: ID 413c:8104 Dell Computer Corp.
[root@Rio ~]# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

[root@Rio ~]#

c'est cette ligne je crois
Bus 005 Device 003: ID 413c:8104 Dell Computer Corp.

kwizart

Désolé je n'avais pas vu le sujet...
Donc a priori je dois corriger quelquechose , mais l'erreur est minime on va pouvoir récupérer...
Déja mets à jours pour le dernier kernel (2933.fc6)
en faisant: yum --enablerepo=kwizart update kmod-wlan-ng
puis boot sur le nouveau kernel:
que donnes :
su -
service wlan-ng start
chkconfig wlan-ng --level 345 on
service network restart
dmesg |tail
ifconfig -a

RENOO

Voila

[renaud@Rio ~]$ su -
Password:
[root@Rio ~]# service wlan-ng start
/etc/wlan/shared: line 77: [: too many arguments
Starting WLAN Devices: Error: Device wlan0 does not seem to be present.
Make sure you've inserted the appropriate
modules or that your modules.conf file contains
the appropriate aliase(s).
[root@Rio ~]# chkconfig wlan-ng --level 345 on             [  OK  ]
[root@Rio ~]# service network restart
Shutting down interface eth0:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
SIOCGIFFLAGS: No such device
Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:
Determining IP information for eth0... failed; no link present.  Check cable?
                                                           [FAILED]
Bringing up interface wlan0:  prism2_usb device wlan0 does not seem to be present, delaying initialization.
                                                           [FAILED]
[root@Rio ~]# dmesg |tail
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
[root@Rio ~]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:13:72:20:00:FC
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:194 errors:0 dropped:0 overruns:0 frame:0
          TX packets:193 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:217623 (212.5 KiB)  TX bytes:24805 (24.2 KiB)
          Base address:0xdce0 Memory:fbee0000-fbf00000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1475 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1475 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2271432 (2.1 MiB)  TX bytes:2271432 (2.1 MiB)

Pour la petite hisoire, j'ai du reactiver ma connection ethernet car plus rien ne marchait après avoir effectué ces commandes :-P

kwizart

Bon le plus simple c'est d'utiliser ndiswrapper...
Ce module n'est pas documenté parceque je ne suis pas sur qu'il fonctionne parfaitement... En plus je ne suis pas sur qu'il corresponde à ton matériel.
On va choisir la solution de facilité qui consiste à prendre ndiswrapper. On va au préalable desisntaller le module:
su -
rpm -q kmod-wlan-ng (pour savoir quels sont les modules présents pour chaque noyau)
rpm -e wlan-ng kmod-wlan-ng-premier_module kmod-wlan-ng-second_module
On vérifies que l'erreur chkconfig ne s'est pas reproduite à la desinstallation:
chkconfig --del wlan-ng
cd /etc/modprobe.d/
regardes si il reste des références à wlan-ng (fichier rpmsave par exemple...- supprimes les: rm)

Puis on installes ndiswrapper (avec le dépot livna au préalable)
rpm -ivh http://rpm.livna.org/livna-release-6.rpm
yum install kmod-ndiswrapper

je te conseille de regarder l'installation de ndiswrapper à partir d'ici:
http://ndiswrapper.sourceforge.net/mediawiki/index.php/Installation#Install_Windows_driver

Page suivante »