Fedora-Fr

Ce site est optimisé pour être consulté depuis un navigateur moderne dans lequel JavaScript est activé.

au sujet de la rt73 et de wpa_supplicant (feedback et problemes)

dubuffet

Bjr

A travers le depot de kwizart (je salue son travail) j'ai pu commencer avoir acces au reseau , mais plus exactement avec l'AcessPoint d'un voisin !!! car je suis inacapable d'acceder a mon routeur (encore un linksys avec une clefs WPA )
je donne des infos

[root@localhost ~]# uname -r
2.6.19-1.2895.fc6
[root@localhost ~]# uname -m
x86_64
pilote rt73
J'ai suivi la doc fedora pour configurer wpa_supplicant.conf
/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel

network={
ssid="picabia_net"
proto=WPA
key_mgmt=WPA-PSK
psk="95knk7jwsqtdjjhe"
}

Une 1ere fois j'ai lance
wpa_supplicant -irausb0 -c /etc/wpa_supplicant/wpa_supplicant.conf.MON_RESEAU -Dwext -B
dhclient
Dwext > option qui n'est pas supportee par mon noyau si je me souviens bien !!!!
alors j'ai lance ces 2 commandes

wpa_supplicant -irausb0 -c/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net -d

extraits
wpa_driver_hostap_set_wpa: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Driver does not support WPA.
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
wpa_driver_hostap_set_drop_unencrypted: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported

et l'autre commande
wpa_supplicant -irausb0 -c/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net -B
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported

Quelles sont vos conseils ?
Merci
PS ( j'ai enleve la WPA de mon routeur pour pouvoir acceder au reseau
car je ne pouvais plus y acceder a travers celui de mon voisin !!! Il faut dire aussi qu a new york en ce moment le temps est exccrable (le temps a peut etre bon dos ???!!!!)

kwizart

Tu peut télécharger la mise à jours de wpa-supplicant voire hostapd disponible sur mon dépot pour rt2x00.
Il vaut mieux utiliser le rt2x00 dans ce cas... (peut être un meilleur résulat avec ce module...)

Voici la procédure pour installer voire tester le module si jamais l'association ne passe pas...
http://rt2x00.serialmonkey.com/phpBB2/viewtopic.php?t=3192&sid=57943ce786f665fefd3edf8dd7b2e441

Tiens moi au courant sur ce forum je ferai le pont avec le site...

dubuffet

Bjr kwizart
Je reitere mes felicitations pour ton travail
----------------------------------------------------
J'ai retrouver le reseau de mon voisin !!!! avec le nouveau driver mais c'etait plus aise avec RutiT
je te communique les infos, dont a la fin les contenus de /tmp/driver.txt
/tmp/eeprom.txt et /tmp/register.txt
Je suis alle sur le forum du site serialmonkey pour "pecher" des infos et aussi mieux comprendre
mais je t'avouerai malgre ma bonne volonte mes limites quand on descend si "bas"
Enfin si tu me donnes des indications elles seront bien venues
Merci par avance

[root@localhost ~]# lsmod |grep rt73
rt73usb 49028 0
80211 198540 2 rc80211_simple,rt73usb
rt2x00debug 14608 1 rt73usb
crc_itu_t 10752 1 rt73usb
----------
rt73usb 49028 0 - Live 0xffffffff881c8000
80211 198540 2 rc80211_simple,rt73usb, Live 0xffffffff8814f000
rt2x00debug 14608 1 rt73usb, Live 0xffffffff8814a000
crc_itu_t 10752 1 rt73usb, Live 0xffffffff88146000
------------
dans /proc/bus/usb/devices
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=13b1 ProdID=0020 Rev= 0.01
S: Manufacturer=Cisco-Linksys
S: Product=Compact Wireless-G USB Adapter
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=300mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=rt73usb
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

les interfaces
wlan0 Link encap:Ethernet HWaddr 00:16:B6:94:1D:D4
adr inet6: fe80::216:b6ff:fe94:1dd4/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:0 (0.0 b) TX bytes:7332 (7.1 KiB)

wmaster0 Link encap:UNSPEC HWaddr 00-16-B6-94-1D-D4-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:16:B6:B0:32:28
ESSID:"picabia_net"
Mode:Master
Frequency:2.437 GHz
Encryption key:on
Extra:wpa_ie=dd180050f20101000050f20201000050f20201000050f2020000
Extra:tsf=0000000d42a631c6
--------------------------------------------------
mais ca se corse ensuite
notamment avec hostapd
/etc/hostapd.conf

interface=wlan0
driver=rt73usb
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=2
debug=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=picabia_net
macaddr_acl=0
wpa=1
wpa_passphrase="95knk7jwsqtdjjhe"
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP

[root@localhost ~]# hostapd -dd /etc/hostapd.conf
Configuration file: /etc/hostapd.conf
Line 2: invalid/unknown driver 'rt73usb'
ctrl_interface_group=0
1 errors found in configuration file '/etc/hostapd.conf'

et aussi avec wpa_supplicant
extraits

[root@localhost /]# wpa_supplicant -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net -d
Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net' driver 'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net' -> '/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net'
Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf.picabia_net'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=10 (from group name 'wheel')
Priority group 0
id=0 ssid='picabia_net'
Initializing interface (2) 'wlan0'
~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~ suite (petit espoir)

Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8b19 len=16
Received 346 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:16:b6:b0:32:28 ssid='picabia_net' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
selected based on WPA IE
Trying to associate with 00:16:b6:b0:32:28 (SSID='picabia_net' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_hostap_set_drop_unencrypted: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
State: SCANNING -> ASSOCIATING
wpa_driver_hostap_associate
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
ioctl[SIOCSIWMODE]: Device or resource busy
Association request to the driver failed
Setting authentication timeout: 15 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b04 len=16
Wireless event: cmd=0x8b1a len=27
Wireless event: cmd=0x8b19 len=16
Received 346 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:16:b6:b0:32:28 ssid='picabia_net' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
selected based on WPA IE
Trying to associate with 00:16:b6:b0:32:28 (SSID='picabia_net' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_hostap_set_drop_unencrypted: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
State: ASSOCIATING -> ASSOCIATING
wpa_driver_hostap_associate
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
ioctl[SIOCSIWMODE]: Device or resource busy
Association request to the driver failed
Setting authentication timeout: 15 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b04 len=16
Wireless event: cmd=0x8b1a len=27
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No APs found - clear blacklist and try again
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
No suitable AP found.
Setting scan request: 5 sec 0 usec
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Failed to disable WPA in the driver.
wpa_driver_hostap_set_drop_unencrypted: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
No keys have been configured - skip key clearing
Cancelling scan request

---------------
[root@localhost ~]# cat /tmp/driver.txt
driver: rt73usb
version: CVS
compiled: Feb 14 2007 14:45:05
[root@localhost ~]# cat /tmp/register.txt
0000 0x0002573a
0001 0x00000004
0002 0x94b61600
0003 0x00ffd41d
0004 0x00000000
0005 0x00032832
0006 0x00000fff
0007 0x00000000
0008 0x013a030a
0009 0x0000a414
0010 0x00000718
0011 0x000a0050
0012 0x00000009
0013 0x00007f80
0014 0x03431e46
0015 0x00000000
0016 0x027eb162
0017 0x9eaa9eaf
0018 0x8a8b8c8d
0019 0x00858687
0020 0xff4a0732
0021 0x0000015f
0022 0x0a143870
0023 0x2e31353b
0024 0x2a2a2a2c
0025 0x000b0640
0026 0x00001010
0027 0x0000c78f
0028 0x233bdf19
0029 0x00000007
0030 0x00000005
0031 0x0000000f
0032 0x00010000
0033 0x000023b0
0034 0x82188200
0035 0x00001160
0036 0x140cfa0b
0037 0x00040a06
0038 0x00080606
0039 0x00000408
0040 0x00000000
0041 0x00000000
0042 0x00000000
0043 0x00000000
0044 0x00000000
0045 0x00000000
0046 0x00000000
0047 0x00000000
0048 0x00010002
0049 0x00430000
0050 0x00000000
0051 0x00000000
0052 0x00000000
0053 0x00000000
0054 0x00000000
0055 0x00000000
0056 0x00000000
0057 0x00000000
0058 0x03000000
0059 0x00000000
0060 0x00000000
0061 0x00000000
0062 0x00000000
0063 0x00000000
0064 0x7373a700
0065 0x7373a700
0066 0x7373a700
0067 0x7373a700
0068 0x7373a700
0069 0x7373a700
0070 0x7373a700
0071 0x7373a700
0072 0x7373a700
0073 0x7373a700
0074 0x7373a700
0075 0x7373a700
0076 0x7373a700
0077 0x7373a700
0078 0x7373a700
0079 0x7373a700
0080 0x7373a700
0081 0x7373a700
0082 0x7373a700
0083 0x7373a700
0084 0x7373a700
0085 0x7373a700
0086 0x7373a700
0087 0x7373a700
0088 0x7373a700
0089 0x7373a700
0090 0x7373a700
0091 0x7373a700
0092 0x7373a700
0093 0x7373a700
0094 0x7373a700
0095 0x7373a700
0096 0x7373a700
0097 0x7373a700
0098 0x7373a700
0099 0x7373a700
0100 0x7373a700
0101 0x7373a700
0102 0x7373a700
0103 0x7373a700
0104 0x7373a700
0105 0x7373a700
0106 0x7373a700
0107 0x7373a700
0108 0x7373a700
0109 0x7373a700
0110 0x7373a700
0111 0x7373a700
0112 0x7373a700
0113 0x7373a700
0114 0x7373a700
0115 0x7373a700
0116 0x7373a700
0117 0x7373a700
0118 0x7373a700
0119 0x7373a700
0120 0x7373a700
0121 0x7373a700
0122 0x7373a700
0123 0x7373a700
0124 0x7373a700
0125 0x7373a700
0126 0x7373a700
0127 0x7373a700
0128 0x7373a700
0129 0x7373a700
0130 0x7373a700
0131 0x7373a700
0132 0x7373a700
0133 0x7373a700
0134 0x7373a700
0135 0x7373a700
0136 0x7373a700
0137 0x7373a700
0138 0x7373a700
0139 0x7373a700
0140 0x7373a700
0141 0x7373a700
0142 0x7373a700
0143 0x7373a700
0144 0x7373a700
0145 0x7373a700
0146 0x7373a700
0147 0x7373a700
0148 0x7373a700
0149 0x7373a700
0150 0x7373a700
0151 0x7373a700
0152 0x7373a700
0153 0x7373a700
0154 0x7373a700
0155 0x7373a700
0156 0x7373a700
0157 0x7373a700
0158 0x7373a700
0159 0x7373a700
0160 0x7373a700
0161 0x7373a700
0162 0x7373a700
0163 0x7373a700
0164 0x7373a700
0165 0x7373a700
0166 0x7373a700
0167 0x7373a700
0168 0x7373a700
0169 0x7373a700
0170 0x7373a700
0171 0x7373a700
0172 0x7373a700
0173 0x7373a700
0174 0x7373a700
0175 0x7373a700
0176 0x7373a700
0177 0x7373a700
0178 0x7373a700
0179 0x7373a700
0180 0x7373a700
0181 0x7373a700
0182 0x7373a700
0183 0x7373a700
0184 0x7373a700
0185 0x7373a700
0186 0x7373a700
0187 0x7373a700
0188 0x7373a700
0189 0x7373a700
0190 0x7373a700
0191 0x7373a700
0192 0x7373a700
0193 0x7373a700
0194 0x7373a700
0195 0x7373a700
0196 0x7373a700
0197 0x7373a700
0198 0x7373a700
0199 0x7373a700
0200 0x7373a700
0201 0x7373a700
0202 0x7373a700
0203 0x7373a700
0204 0x7373a700
0205 0x7373a700
0206 0x7373a700
0207 0x7373a700
0208 0x7373a700
0209 0x7373a700
0210 0x7373a700
0211 0x7373a700
0212 0x7373a700
0213 0x7373a700
0214 0x7373a700
0215 0x7373a700
0216 0x7373a700
0217 0x7373a700
0218 0x7373a700
0219 0x7373a700
0220 0x7373a700
0221 0x7373a700
0222 0x7373a700
0223 0x7373a700
0224 0x7373a700
0225 0x7373a700
0226 0x7373a700
0227 0x7373a700
0228 0x7373a700
0229 0x7373a700
0230 0x7373a700
0231 0x7373a700
0232 0x7373a700
0233 0x7373a700
0234 0x7373a700
0235 0x7373a700
0236 0x7373a700
0237 0x7373a700
0238 0x7373a700
0239 0x7373a700
0240 0x7373a700
0241 0x7373a700
0242 0x7373a700
0243 0x7373a700
0244 0x7373a700
0245 0x7373a700
0246 0x7373a700
0247 0x7373a700
0248 0x7373a700
0249 0x7373a700
0250 0x7373a700
0251 0x7373a700
0252 0x7373a700
0253 0x7373a700
0254 0x7373a700
0255 0x7373a700
0256 0x7373a700
0257 0x7373a700
0258 0x7373a700
0259 0x7373a700
0260 0x7373a700
0261 0x7373a700
0262 0x7373a700
0263 0x7373a700
0264 0x7373a700
0265 0x7373a700
0266 0x7373a700
0267 0x7373a700
0268 0x7373a700
0269 0x7373a700
0270 0x7373a700
0271 0x7373a700
0272 0x7373a700
0273 0x7373a700
0274 0x7373a700
0275 0x7373a700
0276 0x7373a700
0277 0x7373a700
0278 0x7373a700
0279 0x7373a700
0280 0x7373a700
0281 0x7373a700
0282 0x7373a700
0283 0x7373a700
0284 0x7373a700
0285 0x7373a700
0286 0x7373a700
0287 0x7373a700
0288 0x7373a700
0289 0x7373a700
0290 0x7373a700
0291 0x7373a700
0292 0x7373a700
0293 0x7373a700
0294 0x7373a700
0295 0x7373a700
0296 0x7373a700
0297 0x7373a700
0298 0x7373a700
0299 0x7373a700
[root@localhost ~]# cat /tmp/eeprom.txt
0000 0x2573
0001 0x0101
0002 0x1600
0003 0x94b6
0004 0xd41d
0005 0xffff
0006 0xffff
0007 0xffff
0008 0xffff
0009 0xffff
0010 0xffff
0011 0xffff
0012 0xffff
0013 0xffff
0014 0xffff
0015 0xffff
0016 0x1015
0017 0xffff
0018 0x0000
0019 0xffff
0020 0xffff
0021 0xffff
0022 0xffff
0023 0xffff
0024 0xffff
0025 0xffff
0026 0xffff
0027 0xffff
0028 0xffff
0029 0xffff
0030 0xffff
0031 0xffff
0032 0xffff
0033 0xffff
0034 0xffff
0035 0x0f0f
0036 0x0f0f
0037 0x0c0c
0038 0x0c0c
0039 0x0c0c
0040 0x0c0c
0041 0x0b0b
0042 0xffff
0043 0xffff
0044 0xffff
0045 0xffff
0046 0xffff
0047 0xff0f
0048 0xffff
0049 0xffff
0050 0xffff
0051 0xffff
0052 0xffff
0053 0xffff
0054 0xffff
0055 0xffff
0056 0xffff
0057 0xffff
0058 0xffff
0059 0xffff
0060 0xffff
0061 0xffff
0062 0xffff
0063 0xffff
0064 0xffff
0065 0xffff
0066 0xffff
0067 0xffff
0068 0xffff
0069 0xffff
0070 0xffff
0071 0xffff
0072 0xffff
0073 0xffff
0074 0xffff
0075 0xffff
0076 0xffff
0077 0xff00
0078 0xffff
0079 0xffff
0080 0xffff
0081 0xffff
0082 0xffff
0083 0xffff
0084 0xffff
0085 0xffff
0086 0xffff
0087 0xffff
0088 0xffff
0089 0xffff
0090 0xffff
0091 0xffff
0092 0xffff
0093 0xffff
0094 0xffff
0095 0xffff
0096 0xffff
0097 0xffff
0098 0xffff
0099 0xffff
0100 0xffff
0101 0xffff
0102 0xffff
0103 0xffff
0104 0xffff
0105 0xffff
0106 0xffff
0107 0xffff
0108 0xffff
0109 0xffff
0110 0xffff
0111 0xffff
0112 0xffff
0113 0xffff
0114 0xffff
0115 0xffff
0116 0xffff
0117 0xffff
0118 0xffff
0119 0xffff
0120 0xffff
0121 0xffff
0122 0xffff
0123 0xffff
0124 0xffff
0125 0xffff
0126 0x0508
0127 0x000a
[root@localhost ~]#

kwizart

Ok! Donc a priori tu n'as pas besoin d'utiliser hosapd (il faudrait que je vérifies tout de même pourquoi rt73usb n'était pas bon).
Il fait que tu aies un résulat pour iwlist scan est un bon signe... A ce que j'ai compris tu ne vois que celui de ton voisin (et pas le tiens?)
Théoriquement a partir de là, le wpa est sensé fonctionner, tu peux toujours le désactiver pour voir si le problème ne viens pas de là au préalable, mais on peut supposer que tu pourras le réactiver...
A priori tu ne peux pas utiliser RutilT qui est seulement prévu pour les version legacies. Eventuellemnet tu pouurais l'utiliser mais ton interface dois absolument être down! (ifconfig wlan0 down)
Toujours interface démonté (down) tu dois positionner ta clef dans la bonne configuration et seulement apres activer (voir configuration manuelle)
En principe les infos sur le channel et l'adresse mac son accéssible dans la configuration de ton routeur...

dubuffet

Hi

Ce mation apres mon message j'ai continuer a travaille sur "l'interface" et un nouveau
iwlist m'a donne la sortie suivante et le wpa semble fonctionner
donc je vais tester avec mon routeur
J 'ai ouvert un compte sur serialmonkey tjrs avec le pseudo dubuffet, mais j attends le mail de confirmation
Encore merci pour ta contribution
PS= je te tiens au courant

[root@localhost ~]# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:18:F8:43:BE:D1
ESSID:"linksys"
Mode:Master
Frequency:2.412 GHz
Encryption key:off
Extra:tsf=00000022316522ad
Cell 02 - Address: 00:16:B6:B0:32:28
ESSID:"picabia_net"
Mode:Master
Frequency:2.437 GHz
Encryption key:on
Extra:wpa_ie=dd180050f20101000050f20201000050f20201000050f2020000
Extra:tsf=0000000b487eb187